Fuel Pump replacement - 1978 volvo 244 - oem to aftermarket with modification

Поділитися
Вставка
  • Опубліковано 6 жов 2024
  • This video shows what I found to upgrade my oem main fuel pump on my 1978 Volvo 244. The original fuel pump has a 90 degree angle in it. The new pump is straight. I found what is called a banjo valve that makes the 90 degree turn. Connect new Fuel Pump to Fuel accumulator. Looking good!
    oct 2021!! I mentioned that I would normally swap the fuel accumulator out.... well, it failed last week. pump still works great. Purchased new accumulator/ Bosch
    P/N: 0438170001 from Autohauzaz. no leaks!
    I used the following parts
    14 gauge wire and connectors
    '(13PCS) - AFI Fuel Pump Zinc Coated Steel INLET/OUTLET Fittings with Electrical Connector Kit for BOSCH 044 Fuel Pumps - Including Crush Washers' www.amazon.com...
    Fuel Pump purchased from newparts.com Part number 23430008 / 1336517
    volvo 240 244 245 sedan wagon fuel pump bosch 044 connect right angle 1977 1978 1979 only in idaho nutjob hold my beer revolvo sweet ride egg roll car repair automotive help instructions

КОМЕНТАРІ • 16

  • @marcosmata4625
    @marcosmata4625 10 місяців тому +1

    I just did this to my Volvo. Thank you so much for this video walked into it with 100% confidence. Volvo started right up after putting in my new aftermarket fuel pump. I appreciate this video so much thank you thank you thank you.

    • @mdhoore
      @mdhoore  10 місяців тому

      You are so welcome. I appreciate the comment!!

  • @tomcruiise
    @tomcruiise 3 роки тому +3

    thank u for the video, I have to do this on my 1976 volvo 264 and couldn’t find any good info about the new in line pump and fuel accumulator

    • @TheAlju19
      @TheAlju19 3 роки тому +1

      What pump did you put on your Volvo? I have a 264 too, please pass me the link of the new pump if you have already done this reparation

    • @mdhoore
      @mdhoore  3 роки тому

      You are welcome. Thanks for watching.

    • @mdhoore
      @mdhoore  3 роки тому

      The pump in the video was supposedly the correct unit for replacement on the 244. I'm not sure on the 264.

    • @tomcruiise
      @tomcruiise 3 роки тому

      My 264 has a B21F engine in it, so it's technically a 244. I used the 1976 244 accumulator www.partsgeek.com/ss/?i=1&ssq=0438170001+Bosch&x=12&y=7 (0438170001 Bosch)
      and used the 1976 264 fuel pump www.partsgeek.com/ss/?i=1&ssq=E2315+Airtex&x=0&y=0 (E2315 Airtex)

    • @tomcruiise
      @tomcruiise 3 роки тому

      my car is still running and driving so I think it's good! thanks again

  • @jeffmullinix7916
    @jeffmullinix7916 4 роки тому

    Great thanks Jeff .

  • @TheAlju19
    @TheAlju19 3 роки тому

    What is the work pressure of that new pump? Or the old one, it should be the same

    • @mdhoore
      @mdhoore  3 роки тому +1

      94,3 psi

    • @TheAlju19
      @TheAlju19 3 роки тому

      @@mdhoore Both pumps work at 94,3 psi? Your old pump reference is 0580254996?

    • @mdhoore
      @mdhoore  3 роки тому +1

      @@TheAlju19 the new one works great. Model number is in the description. I did not look up psi on the old unit. There is plenty of documentation on bosch fuel pumps for classic Volvos.

    • @TheAlju19
      @TheAlju19 3 роки тому

      @@mdhoore okey, thank you

  • @danielemancin3634
    @danielemancin3634 4 роки тому +1

    Maybe you were looking for something similar? www.skandix.de/en/spare-parts/engine/fuel-mixture-formation/fuel-supply-system/fuellines-and-accessories/fuel-pipe-fuel-pump-connector-pipe/1027034/