How to Replace Sway Bar Link 05-10 Pontiac G6
Вставка
- Опубліковано 9 вер 2024
- Buy Now!
New Sway Bar Link from 1AAuto.com 1aau.to/ib/1ASS...
In this video, 1A Auto shows you how to remove, replace, and install a sway bar end link. This video is applicable to the Pontiac G6 and Saturn Aura, model years 04, 05, 06, 07, 08, 09, 10.
🔧 List of tools used:
• 18mm Wrench
• 18mm Socket 1aau.to/oiz/1AX...
• 19mm Socket 1aau.to/oiz/1AX...
• A Piece of Pipe (for leverage)
• Ratchet 1aau.to/oJ8/1AX...
• Floor Jack 1aau.to/ojg/1AX...
• Jack Stands 1aau.to/ojf/1AX...
For More Info visit us at 1aau.to/h/ajL/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
One word of advice. If you are doing this at home, you might want to put both sides of the car on jack stands otherwise the sway bar will make installing the replacements difficult since the weight of the vehicle is all on the other tire making the sway bar bend up on the side with the tire off. I learned this the hard way.
Hey man! Do you recommend taking the other tire off too?? I can’t seem to get the top off since the plastic shield is just to close to pull it out
Thanks for the helpful video. FYI, on my 08 Saturn Aura, the OEM bolt shaft requires a 6mm hex key to keep the bolt from spinning when removing the nuts, which were 19mm, not 18mm.
The Moog replacement part did require the 2 18mm wrenches as you had shown.
This is great, thank you for your great videos. These videos helped me tremendously working on my girlfriends car. Suspension is still a fairly gray area for me, so this definitely made me feel more comfortable. You have earned a new customer! Pontiac G6 2006
Thanks for the very helpful video sir!
All your videos are great! 👍
+WBBlocker Thank you! We are happy we could help.
Just ordered it, thanks a lot😭
These cars must be notorious for broken sway bar links. Hey went on my 06.
thanks you very much been very helpful.
+Anthony Haynes We're glad the video helped you out. Thanks for watching. 1aauto.com 866-403-3393
Thanks 1aauto! I used a ratcheting 18mm combo wrench and a standard 8mm combo wrench on the stabilizer link. Worked slick.
I missed you taking off the brake hose bracket. Is that required for this repair? My shop says the bushings are worn out, so I'm going to have to get new ones.
Thanks very helpful
+Lamar Jefferson Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
I don't think these are stock sway bar end links because they have grease-able fittings, and the stock ones aren't nearly as thick, and they don't have an 18mm nut on the back.
+JoeyLovesTrains Our parts are aftermarket parts but they are built to the same OE specifications as the original.
Is the torque the same for the upper and lower link 70-75 ftlbs?
Wish the 2009 g6 was that easy.. they changed it so it’s totally different! The rear.
Are the links the same part for both sides of the car?
Can yall do rear sway bar links replacement video
+Ownage_tv313 We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-1AAuto-c
What if you dont have a lift?
Can you guys do a rear sway bar link video?
+Ownage_tv313 We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-1AAuto-c
do you have a video for rear stabilizer link removal for a 2007 g6 3.9l gtp
+Bryan Armstrong Thank you for watching. Unfortunately we do not have a video for your application. We will keep this in mind for future repairs. www.1AAuto.com 866-403-3393
I tried with the bottom and just keeps slipping
Hello can these sway bar links when bad cause the steering wheel to shake when driving at high speeds or when braking from high speeds ?
+NISSAN ZX Yes, they can go bad and result in a shake in the wheel at higher speeds. Hope this helps you out. 1aauto.com
hi i was changing my stabilizer bar i strip inside the hole nut turn how can i get it loose
Horace Curtis Vice grip the tip, when the bolt reaches the pliers, move the pliers behind the bolt, finish unscrewing.
Can't get enough torque to turn the bottom bolt from jack stands. Driving me nuts. 4hr repair.