Big Brake Kit For The Tacoma!!

Поділитися
Вставка

КОМЕНТАРІ • 108

  • @jordanhendrickson1484
    @jordanhendrickson1484 3 роки тому +5

    Some of the best work I’ve seen on UA-cam! Enjoy every video on these builds.

  • @ryanmacs2486
    @ryanmacs2486 3 роки тому +5

    I hope you know that you are putting out the best content. I hope you keep giving us more for years and years to come. Keep living the Toyota Truck Dream.

  • @LOYLSkipSh0t
    @LOYLSkipSh0t 3 роки тому +3

    SRQ fab makes extended brake lines for front and rear (i think three inches longer front) that i have in my 3g4r and they’re very good quality!

  • @670fastcrf
    @670fastcrf 3 роки тому +4

    I have never disassembled calipers down that far!! I always thought they were filled with magic brake voodoo.. ha ha awesome content and information as always Austin! Keep on keepin' on!!!

    • @3rdgenbestgen21
      @3rdgenbestgen21 3 роки тому

      😂

    • @stevanrose7439
      @stevanrose7439 Рік тому

      Ha ha magic brake voodoo.
      Because of these videos I’m gonna rebuild my calipers.

  • @alexei9216
    @alexei9216 3 роки тому +7

    It gets just better and better, that's awesome

  • @WeekendWrenchTurner
    @WeekendWrenchTurner 3 роки тому +4

    Awesome stuff👍👍 This is the best upgrade I've done on the 4Runner along with converting the rear to discs. Keep up the great content🍺🍺

  • @stevanrose7439
    @stevanrose7439 Рік тому +1

    Is the new bigger calipers compatible with the stock wheels 🛞.

  • @125sm3
    @125sm3 3 роки тому +2

    As a helpful hint, remove bleed nipple and use compressed air line to blow out/remove the pistons. Just hold a rag against the pistons to catch them lol.

  • @luvkountry
    @luvkountry Рік тому

    What type of masking tape is used that can withstand the 400 degrees heat? Also is there any danger of the rotors becoming warped from the heat? Thank you for sharing your talent.

  • @BigMike951
    @BigMike951 10 місяців тому

    What do you do with rear drum brakes ? Stick with oem?

  • @danielbyars6
    @danielbyars6 3 роки тому +2

    Would you reccomend this on all tacoma's? Ive had issues with my brakes for a while...

    • @austinniemela
      @austinniemela  3 роки тому +4

      Yes this is a great upgrade for the 1st gen tacoma

  • @1808lcp1
    @1808lcp1 3 роки тому +1

    Do you need to upgrade the brake booster for this mod?

  • @Wyo_Roadhunter
    @Wyo_Roadhunter 3 роки тому

    Hey I was wondering if you could post the part numbers for the hard brake lines and the brackets. I was going to buy the big brake kit but looks like I can buy everything separate for quite a bit cheaper. Thanks!

  • @miguelromero8483
    @miguelromero8483 2 роки тому +1

    Hey where can I go buy this kit for my 96 tacoma 4x4 thanks

  • @bmxtaz
    @bmxtaz 2 роки тому

    When you reassembled the calipers, What did you tourqe the bolts to on the caliper halfs?

    • @austinniemela
      @austinniemela  2 роки тому +1

      I couldn't find a spec, I just went tight plus a smidge haha

  • @koybuscho5880
    @koybuscho5880 3 місяці тому

    Is there a reason to not use cericote on brake calipers?

  • @richardwilkinson3594
    @richardwilkinson3594 3 роки тому +6

    You put the clips for the braided lines on backwards.

    • @cotisado16
      @cotisado16 3 роки тому

      Yup, thats why they have a little bit of play.

    • @austinniemela
      @austinniemela  3 роки тому +1

      For factory lines yes, with these lines not exactly working with the mounts I had to improvise

  • @politicalcheddar686
    @politicalcheddar686 2 роки тому

    Will the 13WL brake calipers work?

  • @yendortgone
    @yendortgone 3 роки тому

    Tacoma calibers are notorious for premature failure i.e. one or two pistons seizing. Does this swap fix that?

  • @Jrerecich
    @Jrerecich 3 роки тому

    Do you have a part number for the calipers? I’m not a huge fan of the powder coated red calipers you linked in the description.

  • @cauchalookn
    @cauchalookn 2 роки тому

    Will these be a good upgrade the gen 5 4runner as well?

  • @scottkailey1
    @scottkailey1 3 роки тому +1

    I can't believe how clean the frame on that truck is!!

    • @genxiong2695
      @genxiong2695 2 роки тому

      Not the rear end 🤣I'm from Cali. I have a 2000 4runner 3rd gen and the only rust is old mud.

  • @bigchrisb59
    @bigchrisb59 2 роки тому

    Will this work on a 2022 tacoma by chance?

  • @jeffreygonzalez8544
    @jeffreygonzalez8544 2 роки тому

    Do you know if this will work for the 2wd 5 lug version mine are trash

  • @juanv2466
    @juanv2466 3 роки тому

    Will this work on a 3rd gen Tacoma

  • @oONeMesiS0o
    @oONeMesiS0o 2 роки тому

    how long to you degas them?

  • @clk27us
    @clk27us Рік тому

    What type of media do you use in your sand blaster?

  • @dtemplman7816
    @dtemplman7816 3 роки тому

    Does the 13WL work on a second gen 4unner

  • @kenny-d3944
    @kenny-d3944 3 роки тому

    Hi I wanna do the upgrade to my 96 Toyota Tacoma but my Mechanics shop manager told me that the calipers are to big and I will have to get bigger rims other then the stock rims..??? Is this true ??

  • @thomasmitchell6921
    @thomasmitchell6921 3 роки тому

    Love your work.
    Please consider painting the bed cover in black!
    The white just seems out of place

  • @thescottishhammer7570
    @thescottishhammer7570 3 роки тому +1

    Loving these videos. Quick question, what model of Kobalt air compressor are you using and do you like it?

    • @austinniemela
      @austinniemela  3 роки тому +2

      It’s a 60 gallon. I have had it for 5-6 years and hasn’t let me down yet!

    • @thescottishhammer7570
      @thescottishhammer7570 3 роки тому

      @@austinniemela Right on. Thanks!!!!

  • @geomatiq
    @geomatiq 2 роки тому

    whats that green transparent tape called?

  • @crlsvaldovinos
    @crlsvaldovinos 3 роки тому

    Do they make this kit for a gen 2 taco. If they do. Do you have a link?

  • @arthurdent5903
    @arthurdent5903 3 роки тому

    Have you tried the cerakote products ? They work great on rifle parts and are very durable.

    • @austinniemela
      @austinniemela  3 роки тому

      Yes I have! It’s a very good product!

  • @MonkeyWithAWrench
    @MonkeyWithAWrench 3 роки тому

    Powdercoat seems like a better way to go over a rattle can. How hard is it to get a good looking part compared to a rattle can?

  • @maddgoatee9708
    @maddgoatee9708 3 роки тому +1

    Killer brake up grade. Can't wait to see what's next.

  • @bendaff9618
    @bendaff9618 3 роки тому +1

    Could I do this to a mk5 (2004) hilux?

  • @juanjosewtf7825
    @juanjosewtf7825 3 роки тому +1

    Beautiful tacoma project, always waiting for the next video 🔧⚙️

  • @motorhead-kf3nc
    @motorhead-kf3nc 3 роки тому +2

    a 4runner rear disk setup would be pretty sweet too 👌

    • @brianross4057
      @brianross4057 3 роки тому

      This is an easy kit, The bracket is From Australia but the rest of the parts you can get from Rockauto. www.designfab.com.au/buying/how-to/toyota-hilux-rear-disc-brake-conversion/

  • @geomatiq
    @geomatiq 2 роки тому

    why doesnt 20:25 he powder coat the bolts?

  • @kinanramroop6365
    @kinanramroop6365 3 роки тому

    Good day, Awesome videos!! Will this work on a toyota 4x4 pickup?

  • @acescape88
    @acescape88 3 роки тому

    Did you paint the frame? If so what did you use?

    • @austinniemela
      @austinniemela  3 роки тому

      Yes! I use napa chassis black or Eastwood chassis paint

  • @kikezurek34
    @kikezurek34 6 місяців тому

    What the rotors brand from Amazon

  • @flexapex9801
    @flexapex9801 3 роки тому

    Will this fit 3rd gen 4RUNNER?

  • @Jonathan-gz6tu
    @Jonathan-gz6tu 2 роки тому

    Are those brand new oem calipers?

  • @Jaws677
    @Jaws677 3 роки тому +3

    A little of conpressed air would have popped those pistons out without any effort or risk of damaging the piston with screwdrivers and pliers

    • @robertboyer5498
      @robertboyer5498 3 роки тому

      Was just getting on here to say the same thing. 😂

    • @garethl.2123
      @garethl.2123 3 роки тому

      I always leave a block of wood on the middle to prevent one piston from rocketing out before the others release.

  • @LuisRamirez-wr4of
    @LuisRamirez-wr4of 3 роки тому

    Its hard to make things with one hand, great video 😀

  • @andreykonovalov7306
    @andreykonovalov7306 3 роки тому

    you can pull out the pistons by air pressure ;)

  • @its_phillkuz
    @its_phillkuz 3 роки тому

    Lovin the progress bro, good work.
    What do you do for a living?

  • @MrQdawgs
    @MrQdawgs 3 роки тому

    Everything you do is super clean!

  • @levimonsen1006
    @levimonsen1006 3 роки тому

    There’s a guy on the forums that made a rear disc conversion kit using Shelby rotors

  • @273VIPER
    @273VIPER 2 роки тому

    That’s attention to details 👌🏾

  • @bigmackstruckstop9213
    @bigmackstruckstop9213 3 роки тому

    Educational and learning about late model toyota tacoma trucks I like

  • @たぁ紺緋
    @たぁ紺緋 3 роки тому +1

    Brake hose clip installation upside down

  • @kikezurek34
    @kikezurek34 6 місяців тому

    And what toyoyota parts are so I can go buy them at toyota dealer

  • @James-of-all
    @James-of-all 3 роки тому

    Another fantastic mod, excellent work sir!

  • @671967
    @671967 3 роки тому +1

    Congrats on the sponsorship!

  • @johnpyle8027
    @johnpyle8027 3 роки тому

    With the detail you're putting under the truck in places most won't see, do you have any plans for the paint on the truck? Man you put that second caliper together way faster! ;o)

  • @binhamda
    @binhamda 3 роки тому

    So wear that masking tape not melt in oven under 400 temperature!!?

  • @jacobshulikov7993
    @jacobshulikov7993 3 роки тому

    I work with UPS at PDX and we get entire airplanes full of Prismatic Powders and boy are they heavy

  • @johncourtneyscott2757
    @johncourtneyscott2757 2 роки тому

    They look nice

  • @bungbentrip
    @bungbentrip 3 роки тому

    Very nice job dude...i love it👍👍👍👌

  • @douglasthompson2740
    @douglasthompson2740 3 роки тому

    Rats! I was all ready for you to be doing a drum to disc conversion on the rear axle. Updates on how the Kei truck is plowing??

  • @abpsd73
    @abpsd73 3 роки тому

    Too funny, I saw my comment a couple times as you were scrolling back and forth.

  • @rampagedingo
    @rampagedingo 3 роки тому

    Congrats on the 100k subs!!!

  • @AatAdam
    @AatAdam 3 роки тому

    The clips are backwards

  • @shaikarshad1395
    @shaikarshad1395 3 роки тому

    Nice job bro show with name replacement car parts details work on doing u r work

  • @joshwheat360
    @joshwheat360 2 роки тому

    Good stuff right there

  • @diyjeff1838
    @diyjeff1838 3 роки тому

    Love it!

  • @jimcatanzaro7808
    @jimcatanzaro7808 2 роки тому

    Beautiful kit I wish I wasn’t broke

  • @C-J-Outdoors
    @C-J-Outdoors 3 роки тому

    👍👍👍

  • @UteTrac
    @UteTrac 3 роки тому +2

    What! No swap for the back brakes? well more like dog food bowle's I for the life of me don't know why Toyota puts em on the taco but no other Toyota truck?

  • @Anthxoy
    @Anthxoy 3 роки тому

    man I really do enjoy your videos wow

  • @scottkailey1
    @scottkailey1 3 роки тому

    Damit man you make me want to find a new first-gen ....mine is a rusted-out shit box!!

  • @leopoldodiaz5078
    @leopoldodiaz5078 3 роки тому

    Nice work

  • @nathankoroush7918
    @nathankoroush7918 3 роки тому +1

    you will be able to sell this truck for around 30grand when your done, easy.

    • @donkeyrider
      @donkeyrider 3 роки тому

      I think I would go for 45k considering and see where it lands but yea 30k easy

    • @nathankoroush7918
      @nathankoroush7918 3 роки тому

      @@donkeyrider Today's market, and 1st gen 4 door, you could be right.

  • @jimcatanzaro7808
    @jimcatanzaro7808 2 роки тому

    The breaks are worth more then the truck

  • @Tony-tk4ht
    @Tony-tk4ht 3 роки тому

    Nutty

  • @inferno1770
    @inferno1770 3 роки тому

    Ahh my brand of bulbs aux beam

  • @jaromnord8325
    @jaromnord8325 3 роки тому

    Powder coat some rims!!!

  • @awhipps
    @awhipps 3 роки тому

    I can’t believe you stopped on my name for the 9007’s. When I watched the previous video I thought you had said 9003. I love my T100, but it seems like there’s nothing you can do with the headlights.

  • @bendaff9618
    @bendaff9618 3 роки тому

    And 2nd

  • @bendaff9618
    @bendaff9618 3 роки тому

    First

    • @stevewhyte8476
      @stevewhyte8476 3 роки тому

      you sir, are a very talented individual !!

  • @rickyschultz6357
    @rickyschultz6357 3 роки тому

    Adventuretaco.com has the brake parts you need.