great video , please pay attention where the files are dragged , only few folder in windows give you full rights .ex USER forlder and the sub dirs as DESKTOP. For the other location , you will have to unlock files and give them admin rights
Great video, thank you for taking the time to document the process. Question, what process did you use to connect the BAFX ODBII adapter to your Windows based PC? I’ve tried multiple times to connect via Bluetooth with no results.
Do you have to open the Melco Diag and then turn the bike on? Because I have been struggling to get it to pull my information out. I have gone through four different options. The Bluetooth you suggested the USB that was also suggested and then a Wi-Fi one and another high-end USB. But I have not been able to connect it but I see that you have first connected to the comport on the Melco Diag, and then turned onto bike.
Hello. I have my Multistrada 1200 2012. I can’t get the program to work; I’ve tried various methods, but I haven’t been successful. I have my license in the appropriate file. I unlocked the file, etc., but the buttons are still grayed out.
That is a very thorough video, well done. I did everything in your video and was able to connect to bike and successfully write report. However in my case the send button to request license fails to send anything. I get an error message. I then emailed jpl250rs directly, 3 days ago, with the data from the report to which I have had no response. I am not sure what my next step/option is?
Thanks! As for your issue, I'm not exactly sure what the issue could be. Only thing I can think of is you must be connected to internet for it to send the request.
@@SNellahi Thanks. Yes l am connected to internet and the MelcoDiag folder is in root directory of "C" drive and l have administrator priveledges...???
@@SNellahi hey brother just to be clear, did your BT obd scanner advertise as "for Android phones only", and the cable used for "older Ducati panigale ei 1299.."?
@@zofury111 it did not advertise as Android only. I used it on my android phone and my windows pc with no problems. Ducati cable is the 4 pin to OBDII.
Thanks for the video! I noticed it only reset from 2023/08/13 to 2023/08/27. I am assuming it goes off the date of the computer/laptop so if I were to update that date to 2024/08/27 it would transfer that into the software and the bike or is it a hard reset of only 2 weeks?
@@SNellahi I misunderstood, the annual service light will reappear on 2024/08/27. Thanks again. Do you have links as to purchase the Ducati Adapter Cable and Bluetooth OBD II?
Shakirr It's been more than 25 hours and I still haven't gotten the lisence , any ideas cause I can't send another email the system doesn't not allow to send 2 times
Does this still work? I downloaded the MelcoDiag but it doesnt go past the start up page but I also do not have it conencted to anything as Im still waiting for my OBD2 tool to arrive.
Please pay attention to the video. You need to connect with the tool first, then get the proper file and send to JP. He will send you the license file amd only then you can get it work..
Thanks for taking the time to make and post your vid.
Excellent walk through - thank you for putting this together.
Thanks. Worked for 2021 Panigale V4S. Was able to reset the annual service to 1 year later, service light went off.
Great video! I will certainly use the info. Thanks!
Way to advanced for my simple abilities but 👍 on your Duc.
great video , please pay attention where the files are dragged , only few folder in windows give you full rights .ex USER forlder and the sub dirs as DESKTOP. For the other location , you will have to unlock files and give them admin rights
very good video mate!!🔥
Thumbs up and much support from my side!
very helpfull thx will use on my streetfighter
Great video, thanks!
after the reset the date should be a year later not just a few days later. did the correct date come out?
Great video I have not got the license yet, I do not know what is happening
Great video, thank you for taking the time to document the process. Question, what process did you use to connect the BAFX ODBII adapter to your Windows based PC? I’ve tried multiple times to connect via Bluetooth with no results.
Do you have to open the Melco Diag and then turn the bike on? Because I have been struggling to get it to pull my information out. I have gone through four different options. The Bluetooth you suggested the USB that was also suggested and then a Wi-Fi one and another high-end USB. But I have not been able to connect it but I see that you have first connected to the comport on the Melco Diag, and then turned onto bike.
How are you connectign the obd2 scanner to the laptop? Via bluetooth?
Hello, work to ducati multistrada v4s ?
Does this work for 2005 999
Hi, can you guide me which scanner to buy? I see some have special chips
Hi, does Melcodiag for ducati streetfigheter V4 work with windows version 7 or 8?
Hello, in my melcodiag in the reset section I do not see the annual service option
I don't have that option either ... still waiting for the lisence
What were the tools you bought to scan and connect to the bike?
I have a 2024 Diavel V4 and it has a 6 pin connector but with 4 wires. Anyone know what cable works for this?
Hello. I have my Multistrada 1200 2012. I can’t get the program to work; I’ve tried various methods, but I haven’t been successful. I have my license in the appropriate file. I unlocked the file, etc., but the buttons are still grayed out.
I though I have a cricket inside my freakin house, it’s yours by the way. 😂
Thank you.
Thank you- I'll use it and brick my ECU ...lol To complex for this mere mortal
That is a very thorough video, well done. I did everything in your video and was able to connect to bike and successfully write report. However in my case the send button to request license fails to send anything. I get an error message. I then emailed jpl250rs directly, 3 days ago, with the data from the report to which I have had no response. I am not sure what my next step/option is?
Thanks! As for your issue, I'm not exactly sure what the issue could be. Only thing I can think of is you must be connected to internet for it to send the request.
@@SNellahi Thanks. Yes l am connected to internet and the MelcoDiag folder is in root directory of "C" drive and l have administrator priveledges...???
@@SNellahi hey brother just to be clear, did your BT obd scanner advertise as "for Android phones only", and the cable used for "older Ducati panigale ei 1299.."?
@@zofury111 it did not advertise as Android only. I used it on my android phone and my windows pc with no problems. Ducati cable is the 4 pin to OBDII.
Thanks for the video! I noticed it only reset from 2023/08/13 to 2023/08/27. I am assuming it goes off the date of the computer/laptop so if I were to update that date to 2024/08/27 it would transfer that into the software and the bike or is it a hard reset of only 2 weeks?
I reset it on the 13th and 2 weeks later decided to do a video on it.
@@SNellahi I misunderstood, the annual service light will reappear on 2024/08/27. Thanks again. Do you have links as to purchase the Ducati Adapter Cable and Bluetooth OBD II?
Shakirr It's been more than 25 hours and I still haven't gotten the lisence , any ideas cause I can't send another email the system doesn't not allow to send 2 times
Does this still work? I downloaded the MelcoDiag but it doesnt go past the start up page but I also do not have it conencted to anything as Im still waiting for my OBD2 tool to arrive.
Please pay attention to the video. You need to connect with the tool first, then get the proper file and send to JP. He will send you the license file amd only then you can get it work..
Do you know if i need Windows laptop for this or will i be able to use a chromebook?
I doubt you will be able to install the software on a chromebook.
This program doesn't reset annual service on panigale v4, why?
Hello, Im getting the error code „cant init elm“ when trying to connect. Do you know why?
I’m having the same issues. Anyone here know or have a solution?
Could you tell me the model of OBDII? Thanks.
It's generic OBD II bluetooth interface, but mine says "BAFX PRODUCTS OBDII Diagnostic Interface". Thanks
Did you use MelcoDiag with the UPMAP map or did you load the original map? Thanks.
@@marcoantinori67 I did not temper with map at all.
@@SNellahi Did you leave the UPMAP map loaded?
@@marcoantinori67 upmap is an external device. I had to unplug it to plug the obd cable. Once I was done with MelcoDiag, I plugged the upmap back in.
It work with Xdiavel 2020? thanks
I would guess it would. You can try and let us know.