Very important to ask the sellers to show the demo service was done. If done by the owner at home, should show receipts for parts. Resetting a desmo service light and not doing a service is too risky. Good point that PulluMoto raised "don't skip your desmo service"
Hi! I followed every step in your video which looks pretty straight forward. I sent the report to the page like you showed and I never got the license. It was 3 weeks ago and I my emails can't be received. I know there is a donation box, but I am not sure if this is the step that needs to happen before it goes through. Hopefully you can give me more info on this. Thank you.
If you did not receive license its probably an issue with the data you are sending. I suggest searching the forum of jpdiag for more troubleshooting as I am sure other people had the same issues
Good information! I bought the cables and downloaded the program. I am going to use this program after I do the Desmo Service on my 2015 Scrambler. Can I also use this program and cables on my 2023 Next Gen Scrambler Icon?
If you have the cables already you can check if the next gen takes the 4 pin plug(i think it does) so from that side you should be sorted, as for software try the latest melcodiag but i dont see a reason why it shouldnt work. Always check the official site and forums to check for compatibility
@@pullumoto Ahhh Ok I will check it out and see if it fits and let you know how it worked out. Thank you! Hey, where is the tiny island in Europe that you live?
@@pullumoto Very nice. I imagine you can take the overnight traghetto to Sicily and do some riding there sometimes. Here in California we have many nice highways and winding roads to explore.
That is very nice, in Malta we don't alot of long roads to enjoy and most of the time the island is grid locked. To go to Sicily and race track we have a high speed ferry which takes around 1hr45min and costs around 200 euro(rider+bike+return)
Does anyone know if this works on the 2021 Scrambler 800 Nightshift? I can't find any info on when the ECU changed to the next-generation. My ECU is an S800IC-CR-FT
I see that the OBD ELM 327 from the link above is different from the one that you have used in your video. It doesn't have that switch. It is ok to use it?
Hi! I bought the cables that you recommended (thanks!) and I have also received the CLE file from JPdiag but I couldn't reset the oil service light. The thing is that I don't have a permanent service light. Basically when I turn on the ignition it shows for couple of seconds that I have 300km left until the oil service. Should I wait until I'll have a permanent service light?
@@alexmurariu87 yes you have to wait for the service light to come on, what you have is pretty standard and it it tells you when the next service interval is. Once those 300km pass the service light becomes permanent and then you can remove it.
i have a scrambler 1100 i am not getting motorcycle infos when i press connect, can you provide the drivers you used to connect the elm interface? thanks
Windows should install all drivers automatically, if not you may need ch340 drivers. Also are you sure the cable are correct? if cable doesnt have the ftdi chip there will be no connection
I have 2 cables wired and 2 Bluetooth, all 2 cables working fine , connected by not gives info moto (( , same with 1 Bluetooth, other Bluetooth failed connection, I have wired 6pin euro 5 adapter Ducati
Very important to ask the sellers to show the demo service was done. If done by the owner at home, should show receipts for parts. Resetting a desmo service light and not doing a service is too risky. Good point that PulluMoto raised "don't skip your desmo service"
Good point and if they cant provide proof at least you can check the timing belts condition very easily on a scrambler before buying
It’s not that big of a deal.
Does this work in 2021 dark icon scrambler? it has 6 pins not 4 pins. TY
not 100% sure, but most probably latest versions of the software will work
can it be use to a sixty 400cc?
If it has the same obd connector under the seat it should work
excellent information thank you
Glad it was helpful!
Hi! I followed every step in your video which looks pretty straight forward. I sent the report to the page like you showed and I never got the license. It was 3 weeks ago and I my emails can't be received. I know there is a donation box, but I am not sure if this is the step that needs to happen before it goes through. Hopefully you can give me more info on this. Thank you.
If you did not receive license its probably an issue with the data you are sending. I suggest searching the forum of jpdiag for more troubleshooting as I am sure other people had the same issues
Check spam folder
Good information! I bought the cables and downloaded the program. I am going to use this program after I do the Desmo Service on my 2015 Scrambler. Can I also use this program and cables on my 2023 Next Gen Scrambler Icon?
If you have the cables already you can check if the next gen takes the 4 pin plug(i think it does) so from that side you should be sorted, as for software try the latest melcodiag but i dont see a reason why it shouldnt work. Always check the official site and forums to check for compatibility
@@pullumoto Ahhh Ok I will check it out and see if it fits and let you know how it worked out. Thank you! Hey, where is the tiny island in Europe that you live?
It's Malta 😄
@@pullumoto Very nice. I imagine you can take the overnight traghetto to Sicily and do some riding there sometimes. Here in California we have many nice highways and winding roads to explore.
That is very nice, in Malta we don't alot of long roads to enjoy and most of the time the island is grid locked. To go to Sicily and race track we have a high speed ferry which takes around 1hr45min and costs around 200 euro(rider+bike+return)
Could this turn off the headlights so I can run only day time running lights ? I’m in canada and they run headlights for safety reasons.
I don't think you can turn them off permanently. The newer scramblers for example have ambient sensor and they turn off the headlight when its sunny
Great video. Thanks a lot!
Glad it helped!
Does it work for Scrambler 800 full throttle 2017?
yes it should be the same procedure
Does anyone know if this works on the 2021 Scrambler 800 Nightshift? I can't find any info on when the ECU changed to the next-generation. My ECU is an S800IC-CR-FT
does it have the same 4 pin connector under the seat for the ecu? I would give it a try if It's the same
Would this work for a Ducati M1100 evo monster from 2012?
It should be the same procedure for that bike yes, but before anything confirm that you have a 4 pin port not the 3 pin
I see that the OBD ELM 327 from the link above is different from the one that you have used in your video. It doesn't have that switch. It is ok to use it?
as long as there is the so called ftdi chip it will work. I updated the links to include also one exactly as mine.
@@pullumoto thanks
Hi! I bought the cables that you recommended (thanks!) and I have also received the CLE file from JPdiag but I couldn't reset the oil service light. The thing is that I don't have a permanent service light. Basically when I turn on the ignition it shows for couple of seconds that I have 300km left until the oil service. Should I wait until I'll have a permanent service light?
@@alexmurariu87 yes you have to wait for the service light to come on, what you have is pretty standard and it it tells you when the next service interval is. Once those 300km pass the service light becomes permanent and then you can remove it.
@@pullumoto thank you so much! I appreciate it!
i have a scrambler 1100 i am not getting motorcycle infos when i press connect, can you provide the drivers you used to connect the elm interface? thanks
Windows should install all drivers automatically, if not you may need ch340 drivers. Also are you sure the cable are correct? if cable doesnt have the ftdi chip there will be no connection
@@pullumoto ty i'll try and let you know
Same problem on my 1100... He connected with "CAN ERROR"
i from VietNam. Can i ask how much is it, bro ??
Both cables cost around 40 euro
TKS YOU BRO
@@pullumoto
I received the lic file, but when I opened the software and clicked on resets, there was no response
So the service warning is still on the bike? The software doesn't give any response when clicking the buttons
@@pullumoto
Yes, I have no other way now, ha-ha
@@xznuww did you manage to reset it in the end?
@@alexmurariu87 NO
感谢指导
Dont work on 2022 icon dark euro 5 ( cant get info moto vin etc, connection ok((((
are you sure you have the correct cables? Most of the time its an incorrect cable issue
Cables is work done connecting but no info moto(
I get try from other notebooks later
I have 2 cables wired and 2 Bluetooth, all 2 cables working fine , connected by not gives info moto (( , same with 1 Bluetooth, other Bluetooth failed connection, I have wired 6pin euro 5 adapter Ducati
pity it doesn`t work on XDiavel 😒😒
apparently the ones with Mitsubishi ecu's that it doesn't work 😔
@@pullumoto mine has bosh