Install Hobbywing Max 10 into Kyosho Fazer MK2
Вставка
- Опубліковано 15 лис 2020
- Uncut video of Hobbywing Max 10 and 4000kv motor installed into my Kyosho Fazer MK2 AMG. The removal of the old esc and motor and the install if the hobbywing esc and motor all in one video
Thanks for Watching - Авто та транспорт
Some solid electronics you chose Kurt . I loved Your surprised reaction when it came apart so easy. So been there! Great video
Haha thanks bro
@kurts
Is the pinion stock?
Do you know which connector for the bettery ?
Thanks for the video! Just upgraded my Fazer MK2 El Camino to the exact same setup so your video was super helpful :)
Glad it helped you, have fun
Thanks man I was set on taking mine apart. The thing was glued so strong I thought it was screwed on. Im glad I checked this out. Thank you
Gonna go brushless on my kyosho 1970 frazer chevelle. Thanx for Taking time out your day to make this video 👍🏻
Thanks for watching i'm glad it helped you
Cool install. 👍🏻
I know it doesn’t have to be perfect but a really easy way to trim the double sided tape is to stick it on your part the set that on a piece of wood or a flat piece of plastic then trim it with your utility knife.
Thanks that’s a good idea I’ll have to try that next time
Nicely made install vid!!i jus bought the mk2 drift supra n i love it lol def a winner in my book😊
That's a nice car
I just picked up the same car yesterday, it is so nice and that electronic you selected will be nice in there. Good choice. 👍🏻👊🏻👌
You are going to love it, It handle so good
Bad ass setup! Great video Kurt!
note to self, plug the heat sink cable in before seating the motor
That would be a good note 🤣 thanks for watching
Nice one kurt enjoyed the watch
Thanks for watching
catching an old one hahaha. very cool car man.
Thanks for watching
Nice work well done looks good 👍
Thank you
Nice Kurt's I'm building a 2wd Fazer at moment
Nice 2wd will be fun to drive
Great video I really enjoy it thanks for making it
Thanks hope it helped you
Great video.
Keep it up and you will have lots of subscribers very soon.
Thanks for watching
I've been looking to start an on- road touring car style of build. Didn't really know much about the Kyosho. Thanks for the look at it. I'm kind of leaning towards the 4tech 2.0 but still don't know cause I'm mainly a crawler guy.
The Kyosho is a great platform but parts are hard to get right now. The 4tec is also a great platform but parts are everywhere and I think the 4tec is built a little better and stronger but that is my opinion
Thanks for watching
Great video.
Thanks
Nice work
Thanks
Great choice man.. 👍
Thanks, I’ll be hitting you up for a drive line after the holidays is you still have one
@@KurtsRCs V2 shaft coming soon this week. One peice shaft kit.
I want to get the Kyosho FAZER MK2 Chevy Camaro Z28. It's worth considering closing that too 👍
Thanks for the video tutorial, just want to know, how did you connect and setup the ESC so it will bind and receive signals from the stock Kyosho receiver?
Owiii 💥💥💥🔥 💯💯💯
Thank you
How long is the center shaft?
Did you upgraded your pinion gear and spur? Or are you still running stock?
Did the cable from motor to esc is correct? I am kinda confuse on how did you came up with that set for blue yellow orange?
Did your esc come with a capacitor?
Hey bud! I've got the 5400kv set up in my L chassis. I've had to go to foam tires as stock ones ballooned too much and started melting the body lol
It’s the stock spur and 37t pinion. It is one of my favorite cars set up like this it handles so good. I think the 4tec spur gears will fit with a little mod I’ll be trying to fit on it in
How does the 5400kv fair on your RC? Has it lasted? Has it stopped working? Pros & Cons?
@@sm6451 mine is going strong. I haven’t heard of any issues and tbh it’s a bit over powered for 1/10 scale touring cars. What platform are you thinking of using it for?
@@SuperDrake79 I bought it for my Kyosho Fazer MK2. I think ill just have monitor heat and find the balance between performance, stability and temperature.
@@sm6451 it’ll be great. Get some contact foam 26mm tires off AMain. I had no heat issues and we have high humidity around mid 90’s - low 100’s F.
Witch better than Tamiya TT01 Kurt's??
Looks like a hobbywing max8 won’t fit in there then, dang really hoped it would
You would have to mod the whole car to get that to fit
I recommend foam tires because this machine smokes rubber ones in a few runs
My stock tires are bald so I was going to burn them up and get some new tires. I’ll try some contact foams from one of my other cars to see how it handles. Foam is good for straight but rubber is good for sliding around. Might have to get both 😂
@@KurtsRCs I have a pair of both and yes!! I do my speedruns and track running on foams and just bashing around on rubbers
Do you know whic battery connector the hobby wing has?
Awesome upgrades,can't wait yo see it rip
Thanks should be a fun rip now
Brother, seria ótimo vc mostrar a conversão do kyosho a combustão para o elétrico, forte abraço do Brasil
Thank you I do not have a combustion car but that would be a good video
Thanks
Kurt.....outof the box could I run 2S lipo in this model? Is the ESC low voltage lipo safe, etc? Thanks
Brent Ferrell yes you can run 2s lipo in this car out of the box
@@KurtsRCs I ran a 3s LiPo out of the box. Ran just to test.
What type of screwdriver do I need to take the think out from the motor?
You need a 1.5, 2.0, 2.5 hex
It took me a minute to figure out the motor mount. I heard you say "I" setting on the mount for a 37T pinion? I've been trying to figure out the correct letter to pinion configuration?
Same here , I just bought the same brushed motor and esc , I also have the same kyosho 37t pinion , I don’t understand the letters that much either
@@aronroth6027 its in the instructions! Lol. I never read them until all else fails.
Thanks for letting me know , I actually did figure it out , when I upgraded my kyosho el Camino to a castle creations brushless system , I was going to go with the setup in the video like he did , but I think that the specs on castle creations is a little better
It’s a 60 amp version the 120 amp looks the same but is much bigger
Did your stock pinion have no grub screw ? Mine did not, it was plastic with no grub screw.
It was plastic with no grub screw, I got a metal 37t from Kyosho
@@KurtsRCs thank you. Did you just pry the plastic pinion off ?
Ya it just slides off, it is tight but i put a screw driver under it and popped it off
@@KurtsRCs awesome thank you. Any issues with Spurs and diffs going brushless ?
Not so far everything is holding up good
I bought the Hobbywing 3652 3s 5400kv motor combo. Do you forsee any limitations or problems regarding that motor vs the 4000kv motor? Or should it be ok?
Also, how is it running since you installed the upgrades? How does Hobbywing compare to some of the other brands? Has it lasted or did it break?
UPDATE: Got my Hobbywing 3652 3s 5400kv motor/ESC combo today and installed. Hardest part was to cable manage. All other parts fit like a glove. Waiting for my low profile 3s LiPos. Its been raining.
That will work good in that car
Which battery connector?
XT60
@@KurtsRCs does it come with it?
Yes
@@KurtsRCs already soldered on it? The brushless motor and ecs
If you buy the combo pack it is already set up. Everything is soldered just need a battery with a xt60 on it
It seems that everyone is very happy with the Fazer , I bought a Tamiya tg10 mk2 fn purely to use 190mm bodies , boy was I sorry , no bearings , single speed , fuel tank sits too far out , they don't even line the body posts up correctly, the real bonus ....Tamiya paint is destroyed by fuel . Nitro is as you Americans say total trash .