That's a great video and I really like the AMG Mercedes coupe . I got 2 ready to run Fazer 1969 Chevy Camaro Z28 ready to run , one is the Brushless black supercharged and the other is the frost green Z28 and I recently got a Fazer chassis around 4 weeks ago here in Australia. I was waiting a fair while but the guy I'm buddies with at my loca hobby shop had placed his order over a year back. The Fazer chassis retails here in Australia for $278.09 AUD. That's probably the best way to get every spare part you will need. And I agree the Kyosho Fazer chassis is a great platform for on road touring car track use. I even reckon the brushed G14 L motor is plenty fast and the VE brushless is ridiculous. Just a little bit of a handful. Not allowed in any race class too because the rules are for stock cars with brushed motors. Yeh and as great as the Kyosho Fazer chassis is I never would have believed back in the old days that drive shafts would be plastic . But it's not only the centre shaft but also each driveshaft from differential to hubs and even the drive cups. The Fazer chassis kit eliminates the plastic and gas aluminium for all shafts . Well I will have to check tomorrow in the daylight but ithink.its a great way to get speed buying the chassis give new wet part.
Wow that looked easier then i thought, gonna pick one up now. My brushless system is causing some serious rattling at over 50% throttle. Gonna be interesting to see the difference between the plastic and metal.
Not sure where you are from but Kaniz RC out of the United States makes a way better drive shaft for $30. Here is the video with his UA-cam Channel link, ua-cam.com/video/-pT_gADG2P8/v-deo.html&ab_channel=Kurt%27sRCs
wonderful Fazer Mk2 (is there the possibility of raising the chassis a little from the ground?) this in order to take it to terrain with little land.. Regards.
Just curious I just put a vxl esc and motor in, my driveline seems over tight, I even got the cups with it, I'm thinking it might be the little rubber o rings in the cups, might have to remove one or find a way to push them deeper, it rolls but it's really tight, it even runs, it's just so tight it worries me
@KurtsRCs appreciate it, thanks for helping, nice to bounce my ideas off someone who gets it, I can't get them to fully seat, it's almost like the mesh of the pinion is causing pressure to the driveline, and since they aren't in fully it's just enough to make it really tense to roll
Hello I have Kyosho mk fazer camaro (fz02 chasis) I have took this idea and applied it to my rc. But I have a question. I want to upgrade the dogbones drive shafts for the wheels what do you recommend?
Not sure if you have Instagram but you can message kanizrc and see if he makes some if not you would have to wait for Kyosho metal ones to come back in stock
@@KurtsRCs ok thanks. So hobby wing combo and drive shaft is all i need to make it brushless? Because i really dig in the design so nice. I am xhjosing between arrma vendetaa or this one then convert to brushless. The style of kyosho is the best.
@@Tylenol888 if you want a good drive shaft you can get one from Kaniz RC or @kanizrc on instagram he sells drive lines for Kyosho and Traxxas cars. I have a video installing them in my Fazer Mk2 and Traxxas 4Tec
@@KurtsRCs oh ok i am just planning to buy arma vendetaa or this kyosho. In vendetta i will just put my battery and its already 3s. But in kyosho i like the scake size and the looks. Which i can upgrade later to 3s. Its hard to decide.
That looked easy enough!
Have a great day and be safe out there!
RC ModSquad thanks you too
Thanks for the video. I’m planning the same upgrade.
That's a great video and I really like the AMG Mercedes coupe . I got 2 ready to run Fazer 1969 Chevy Camaro Z28 ready to run , one is the Brushless black supercharged and the other is the frost green Z28 and I recently got a Fazer chassis around 4 weeks ago here in Australia. I was waiting a fair while but the guy I'm buddies with at my loca hobby shop had placed his order over a year back. The Fazer chassis retails here in Australia for $278.09 AUD. That's probably the best way to get every spare part you will need. And I agree the Kyosho Fazer chassis is a great platform for on road touring car track use. I even reckon the brushed G14 L motor is plenty fast and the VE brushless is ridiculous. Just a little bit of a handful. Not allowed in any race class too because the rules are for stock cars with brushed motors. Yeh and as great as the Kyosho Fazer chassis is I never would have believed back in the old days that drive shafts would be plastic . But it's not only the centre shaft but also each driveshaft from differential to hubs and even the drive cups. The Fazer chassis kit eliminates the plastic and gas aluminium for all shafts . Well I will have to check tomorrow in the daylight but ithink.its a great way to get speed buying the chassis give new wet part.
Very nice Build indeed my freind ,good Job 👍😎🥰👍🇺🇲🇬🇧👍
Tonys Rc Tech thanks it's a nice car
This helped thank you!
Glad it helped
Wow that looked easier then i thought, gonna pick one up now. My brushless system is causing some serious rattling at over 50% throttle. Gonna be interesting to see the difference between the plastic and metal.
Not sure where you are from but Kaniz RC out of the United States makes a way better drive shaft for $30. Here is the video with his UA-cam Channel link, ua-cam.com/video/-pT_gADG2P8/v-deo.html&ab_channel=Kurt%27sRCs
@@KurtsRCs Damn the regular one already shipped :/ should probably be good enough tho.
@@RyanDeMarco ya it will work good mine worked for a long time
@@KurtsRCs Update: just ran it for the first time, definitely going for that $30 custom driveshaft LOL.
@@RyanDeMarco haha you will like it a lot more much stronger
Cool Thank you for sharing it with us my friend
RC VHX 22 you got it brother thanks for the support
@@KurtsRCs you're welcome 👊😜✌
Nice Kurt's I need 1 of those
KaniZ has a better center drive shaft check his out before buying the aluminum one
wonderful Fazer Mk2 (is there the possibility of raising the chassis a little from the ground?) this in order to take it to terrain with little land.. Regards.
You should try the KaniZ RC Mod
Avid RC I saw that after I already had this one, I might try that because this aluminum one has a slight bend in it
nice drive line upgrade
Thanks
Just curious I just put a vxl esc and motor in, my driveline seems over tight, I even got the cups with it, I'm thinking it might be the little rubber o rings in the cups, might have to remove one or find a way to push them deeper, it rolls but it's really tight, it even runs, it's just so tight it worries me
If it’s to tight you can remove one of the o rings just make sure the drive shaft will not fall out
@KurtsRCs appreciate it, thanks for helping, nice to bounce my ideas off someone who gets it, I can't get them to fully seat, it's almost like the mesh of the pinion is causing pressure to the driveline, and since they aren't in fully it's just enough to make it really tense to roll
I watched the funny and informative video well. You have a good hobby. Want to be a close friend.
우리 친구해요 👍👍👍👍👍
Doin mine right now.
Just bought the fazer Supra mk2 and the plastic drive shaft snapped in the middle
Hello I have Kyosho mk fazer camaro (fz02 chasis) I have took this idea and applied it to my rc. But I have a question. I want to upgrade the dogbones drive shafts for the wheels what do you recommend?
Not sure if you have Instagram but you can message kanizrc and see if he makes some if not you would have to wait for Kyosho metal ones to come back in stock
Are you still having a problem getting parts ? Just buy another one or chassis kit with no electronics.
No I got the Kanzi RC drive line work way better and stronger
Where did you got the driveshaft?
From OMGRC.com
@@KurtsRCs ok thanks. So hobby wing combo and drive shaft is all i need to make it brushless? Because i really dig in the design so nice. I am xhjosing between arrma vendetaa or this one then convert to brushless. The style of kyosho is the best.
@@Tylenol888 if you want a good drive shaft you can get one from Kaniz RC or @kanizrc on instagram he sells drive lines for Kyosho and Traxxas cars. I have a video installing them in my Fazer Mk2 and Traxxas 4Tec
@@KurtsRCs oh ok i am just planning to buy arma vendetaa or this kyosho. In vendetta i will just put my battery and its already 3s. But in kyosho i like the scake size and the looks. Which i can upgrade later to 3s. Its hard to decide.
Why am i having a hard time removing mines..
This driveshaft fit's to MK1 model?
i'm not sure Ask @kanizrc on Instagram he made it
As much as I like this platform and Kyosho in general, the parts support is laughable and the mods/upgrades for it are stupid expensive.
Part support does suck