Machete Restoration - Knife Transformation [Ebony Brass Handle]
Вставка
- Опубліковано 29 бер 2024
- Anyone who likes extremely rusty, old things will love this restoration. More precisely, it is more of a transformation from a machete to a knife. I had to do a lot of work on the lathe, grinding, drilling, tapping, electrolyzing, hardening and a lot more... Since the original handle of this antique machete was no longer there at all, I had to make a new one out of ebony with brass caps. The pitting caused a lot of damage to the machete, so the knife ended up looking old and new somehow! Stay tuned and have fun watching!
▶ What did I do?! ◀
Use a needle scaler to remove the crust of rust, that was really a lot of rust. This is then removed more deeply with electrolysis. Since the rust was already far too advanced, I could no longer save the machete in its original form and converted it into a knife. It gets its contour on the belt sander and the cutting edge is processed. During hardening, the knife is heated to 800 °C and quenched in preheated oil. The metal must then be tempered three times for one hour in an oven at 200°C. Since the old handle no longer exists, I remade it from ebony and brass caps; I did everything with the lathe and milling machine. Finally everything was assembled and the cutting edge was sharpened; Now nothing stood in the way of testing the knife.
▶ Good to know ◀
I used the following tools: needle scaler, water, glass container, salt, laboratory power supply, scriber, angle grinder, belt grinder, pen, caliper, hardening oven, immersion heater, thermometer, blacksmith tongs, oil, spatula, wire brush, oven, center punch, cordless screwdriver, drill, thread cutter, Cold bluing, abrasive fleece, lathe, turning chisel, boring bar, milling cutter, milling machine, two-component glue, file, sandpaper, grinding stone
▶ Special thanks to my channel members! ◀
-
▶ Do you want to support me? ◀
Would you like to become a channel member? Then you can do this here:
/ @forgottenshinerestora...
Do you like what you saw and want to help the channel develop further? If you want to support me, you can donate via Paypal:
www.paypal.com/donate?hosted_...
or use the following affiliate links:
Material to work with:
Metabo bench grinder: amzn.to/46rrkxL
Metabo cordless screwdriver BS 18 LTX-3 BL: amzn.to/43833JV
Metabo bit set: amzn.to/3pzwV4n
Rust remover: amzn.to/3vdQ52f
Pin punch: amzn.to/3NEn1qX
Drill rods: amzn.to/3TFFOWD
Equipment:
Camera Sony AX-53 amzn.to/3XHqI2J
Ring light amzn.to/3rhgj1Q
Microphone Rode amzn.to/44vlFF1
DJI Gimbal Camera amzn.to/3O1YjkJ
Affiliate links cost you nothing, I only receive a small share from the seller, you have no disadvantage.
▶ Did you like it? ◀
Did you like the video? Then like, subscribe and share, please!
Thank you! - Наука та технологія
![Axe Restoration [Black Axe With Ebony Handle]](http://i.ytimg.com/vi/a93mbHuTsww/mqdefault.jpg)
![Axe Restoration [Black Axe With Ebony Handle]](/img/tr.png)
![Why Did They Stop Making These? [Restoration]](/img/n.gif)
Seeing these relics come back to life is absolutely satisfying to see
🥰🤩🐢
I’ve tried watching several other similar channels to scratch the itch but none of them can match the odd charm of Forgotten Shine.
I always come back.
Thank you very much 🤪🤭🐢
1:46 Dobrou chuť.😄
2:26 výroba nového nože.
4:06 želvička hlídá teplotu. 17:05 krásná obnova. Pěkně ostrý nůž. Dobrá práce.👍
Pavel 🇨🇿
Dude! That knife turned out awesome! And i love the way the screw fit in flush in the cap. Great job!
And I appreciate that the sharpness test was on a grape and not a piece of paper.
This may be the prettiest thing I've seen you restore/make. WELL DONE!!!
Thanks! 🐢
Outstanding transformation!!!!! You made an heirloom that looks great and you saved a great blade from the scrap heap. Well done sir!!
Thanks! 🐢
1:18
Who wants to eat the forbidden brownie?
🤣🤣🐢
I do i do 🖐
It's a good work, anyone can make new but restoration is quite a challenging job.. Well done sir❤❤❤❤
Immer interessant zuzuschauen! Es fehlt nur noch der Block, in den alle von Dir restaurierten Messer eingesetzt werden können...😏👋ps frohe Ostern 🕊🐣
Vielen Dank! Eigentlich eine gute Idee, so einen Block zu bauen... 🤔🐢
I hafto say, watching you use that neddle scaller is very cool!
Nice to be able to share a grape with 30 people 🙂
🤣🤣🐢
1:42 Wait, you can't do that!! 🤣
🤣🤣🐢
Prost 😹😹😹
It wasn't a machete it was a bill hook for hedge cutting.
handle is far more better than knife...
I can't believe I'm just in time to see this within 24 hours, it's so awesome
I love the captions! I love reading about what you’re actually doing. So happy to get another video. ❤
Thank you so much! 🐢
Good job, looks awesome. I love doing refurbishes myself.
I have missed your content. Thank you and have a good holiday weekend
It looks great and you did a wonderful job restoring it as well!!!!
I enjoyed your video so I gave it a Thumbs Up
Thank you very much! 🐢❤
was that an acid dip it was in? didn't see what it said the liquid was
Лучше чем с завода
Руки - голд
Prima gearbeitet, so macht man aus uralt feine Messer.👍👍👍
Das stimmt 👍 Danke! 🐢
Highlight of my day! :D
🐢❤👑
Glad to see Mr Turtle is back in swimming shape
Handle's cool! So is that sharp blade!
Another excellent piece of work!
Thank you! 🐢
Спасибо за вашу работу и профессионализм))
P.S. очень интересная технология закалки металла в подогретом масле....
3:29 Very cool holder for sharpening on the belt grinder, you can really work on any knife.
Неймовірна робота,вражаюче,творчий підхід не має меж!!!Особлива подяка черепашці,за контроль якості🐢😊!
A recommendation. Round handles make edge alignment more difficult, and affect how well something can cut. I’d recommend rectangular or oval handles instead.
1:42 Mmmm. Good soup.
🤣🤣🐢
right out the gate with the needle scaler let's goooo
Hello mister beautiful knife Beautiful restoration good job well done
Isso é uma obra de arte parabéns
What a fantastic job, a new knife from old steel, which seems to be the best. Really satisfying to watch. Best wishes mate 😊
Thanks! 🐢
Needle scalerrrrrr 😍😍😍😍
🤣👍🐢
What a work of art, and that handle, wow! You are super talented 👍🙏👏
Thank you! 🐢
Awesome 👍
A fine piece of a horror knife. Jason were proud to own that. 🧟♂️🔪
😳😲😱🐢
This is so satisfying
This video is basically: What is he doing?
Aaaaa
What he is doing?
Aaaaah
....
That needle scaler is forbidden itching tool.
Nice! Skillfully done
Thanks! 🐢
I think it cojld have looked better if welding the rusty areas of the blade and making it fully smooth
The turtle 😭❤️4:06
Very nicely done.
Great Restoration looks really nice
Thank you! 🐢
good!!🎉🎉
So what do you do with the blades?
Turtle told me he was offended not getting air time. 🐢
😭🐢
love the videos bro
O melhor que alegria um vídeo seu
Muito obrigado! 😲😳🥰🐢
Превосходно!👍👍👍👍👍👍💪💪💪💪💪
Большое спасибо! 🐢
Restaurada faca 🔪😉
I'm completely ignorant to your profession and I admittedly have no idea how electrolysis removes rust…but wouldn't sandblasting remove the rust faster and easier? Genuinely asking.
nice
That shot of the rust scum at 1:25 reminds me of The Bog Of Eternal Stench
Smellllll baddddddddd
nice Video 😎
Thank you! 🐢
The perfect conductivity for electrolysis should be 3000us (Micro Siemens) above your mains cold water supply your using
Next time start with old brake roters
Great work dude, looks awsome 👏👏
Thanks! 🐢
Эбеновая латунь . 😂 😂 😂
멋지다 좋은영상
Penso que o cabo deveria ser rústico igual à lâmina da faca.
this video my chose
I ❤ it is not a problem to miniforce x
the colour and texture of the blade makes it look really cool
Billhook not a machete
Beautiful restoration job you did transforming a rusty machete into a kitchen knife. Even the pitted surface looks better and gives the knife a unique look. It also cuts cleanly. Excellent work.
Thank you very much! 🐢
Great and beautiful handle but the knife is really ugly.
Idk i kinda like it
yeah it was
Not sure if the hardening took if you drilled and tapped that easy
カメのブラシがとても可愛い😍🐢
Yes i know about surface tension of water
Kompliment 👍👍👍
Vielen Dank! 🐢
4:04 WHAT IS THAT ITS SCARING ME😭
Where does bro get the rusty machetes and knives and stuff
tenho alguns pra reformar
is no one going to talk about how he ate rusty water
🤷♀️🤣🐢
Καλησπέρα φίλε μου. Μπορούμε να μαυρίσουμε ένα γυαλιστερό μαχαίρι με ηλεκτρόλυση και πώς;
Νομίζω ότι έχω ξαναδεί κάτι τέτοιο... πρέπει να συνδέσεις τους πόλους σε αντίθετες κατευθύνσεις... αλλά δεν το έχω δοκιμάσει ποτέ. 🐢
@@ForgottenShineRestoration Σ'ευχαριστώ πολύ.
Looks like a billhook rather than a machete.
The best👍💯.......
Second..
so, what's the taste of that rust juice, man?
It tastes like iron 🤔🐢
rumit sekali
HATE the pitting
A round handle???
Das ist keine Machete, das ist eine "Hippe" (oder in der Schweiz "Gertel") - oder besser: es war eine...
Zum Glück nur ein günstiges Gebrauchswerkzeug (um nicht zu sagen "Verschleissteil"), kein teures Werkzeug - und somit ist auch die Transformation zur "Kurzmachete" kein Problem. Besonders schnitthaltig wird das schöne Messer allerdings nicht sein; Gertel und Hippen sind nicht sehr hart (darum so ballig geschliffen) und bestenfalls aus 440er oder Federstahl.
That's a billhook
And he takes the tip off alright I'm not watching this
17:30 இதுக்கு பருத்திமூட்டைய குடோன்னுல இருக்கலாமே
This isn't a restored machete
No, it's so much more.
Very bed work time west 😢
So much of effort to cut a fruit.
4:06 defuq is that
🐢
Not a restoration
1:05 it's looks like south indian🇮🇳 weapon named "ARUVA"🤔.Your restoration failed.
5th I will take it
First
second
un bel manico x uno schifo di lama
அண்ணா ஏன் இவ்வளவு கஸ்ட படுரிங்க 599 ரூபாய் சூப்பர் அருவா வாங்கிக்க வேண்டியது தானே
😂😂தலைவா அருவா தான் இது இவர் கத்தியா மாத்திட்டாரு his restoration failed.