Great restoration! The sound from that extraction system you have for the paint sounds like you're either down in the Mariana Trench, or in space lmfao.
У вас шикарные видео и черепашки такие милые🫠 Раньше я любила смотреть, как умельцы делают удивительные вещи из дерева и эпоксидной смолы - но теперь мне нравится смотреть, как вы реставрируете старинные металлические штуки😊 Лайк, подписка!
Very nice refurbishing of such an old rusty scale. Even with your iffy painting efforts (your alluding to) it still has such a regal look to the finished product. I say you made it look great... Thumbs Up!
Very nice restoration - so many nice components including checking for lead and having a fume hood for spray painting (safety first!). I was wondering, is there a crack in the cast iron at 8:09 in one of the bolt holes? I couldn't tell, but I know those are tricky to braze (well, based on other channels). Great video!! 👍
The earplug-in-the-hole trick is a tip I’ve given on so many of these restoration channels that I don’t remember who all I’ve told it to. If you heard it from me, I’m glad you’ve found it useful. If you _didn’t_ hear it from me… well, I’m *STILL* glad you’ve found it useful! Good restoration! The laser etched faceplate turned out very nice!
At this point, you've gained most of the skills needed to direct a small budget movie : ) It would be really cool to know where you are finding the things you rebuild, also how do you know all of the effort put into something is going to return something worth that effort? I mean, some of the things you fix are so covered in rust, how do you know that's good material underneath of it?
Thank you very much! These are really a lot of very good questions... I usually buy these items online, for example on eBay. Of course, I never know if the restoration will be successful, which is why I am always very nervous at the end of the restoration whether everything will look good again in the end... 🐢
Nicely done! Did you coat the laser engraved scale with a clear lacquer? Also, would the depth of the laser engraving permit adding color to the scale?
Thanks, no I didn't put any varnish on it. Since the surface was already rough, I didn't dare put powder on it, otherwise everything might be colored and I didn't want that... 🐢
Чувак, весы - это точный измерительный инструмент. В данном случае никакая реставрация не вернёт их к полноценной функциональности! После реставрации они лишь выглядят как новые, но годятся лишь как декоративные, для музея.
I loved the intro! On the other hand, the machines sounds were too loud and harsh. In older videos they were a little dampened more pleasant. All in all, another beautiful restoration!❤
Thank you for your feedback! I'm working on reworking the sound, something seems to have broken, I noticed myself that something was wrong. It should be fixed in the next video...🐢
Yeah, but would the painting have been perfect on an original unit? Probably not, so you made it look authentic. Painting freehand is not easy. Take it from a model builder. it takes quite a while and a lot of practice to get really good.
Awesome restoration! Precision masking tape might help with the painting as it's meant to be flexible enough to go around the corners while still giving you a crisp line.
Do you offer this as a service? I have an old relaoding press from my grandma id love to have cleaned up. Though its no where near as in bad shape as this stuff haha
You can use a sandblaster for restoring hardware. You are wasting tons of time doing this by hand. I restore all my blots and any other bits in the sandblasting cabinet
Very satisfying to watch this transformation.
Thank you! 🐢
Great restoration! It's always impressive to see scrap iron turned back into a useful and attractive instrument.
Thank you very much! 🐢
babe wakeup new forgotten shine restoration video dropped
🤣🤣👍🐢
I restored one just like it about 35 years ago. The base was broken so I used epoxy to hold it together. Still works!
Wow, This is really cool! 👍👍🐢
wie immer ein Genuss, dir zuzusehen und zu -hören :-)
Danke für das Lob!🐢
Really enjoyed watching this restoration . Excellent craftsmanship !
Thank you very much! 🐢
Love your cordless drill 😜 and the cool sandblast shots!
Thank you!🐢
Incredible work as always 👍👍
Thanks a lot! 🐢
Soo Happy to get to see another one of your videos, you do great work.
Thank you! 🐢
Awesome restoration!
Thank you! 🐢❤
Colles intro.
Auch wieder eine einwandfreie Arbeit. 👍🏻
Danke für das Lob! 🐢❤
Great job as always, this one looked like it was a doozy to put back together 😅.
This is restoration on a scale never seen before!! 😉 ❤😍
Thank you very much! 🤩🐢
Good stuff!
Gut gemacht 👏
Danke! 🐢
really great job! 🍀🍀👌👌
Thanks a lot! 🐢👍
Nice restoration 😸
Thanks! 🐢
Das Laserdingens ist geiler Scheiß. Genau mein Dingens. Der Rest, wie immer, sensationell.
Vielen Dank! Ja, der Laser macht schon richtig Spaß! 🐢
My favorite restoration channel
Thank you so much! 🐢
I think I need a laser for my workshop, too. Also cause of the funny sound...😊😂😅
🤣👍 Thats true... 🐢
Unintentional ASMR love it
It is a little bit intentional 😅🐢
It looks great and you did a wonderful job restoring it as well!!!!
I enjoyed your video so I gave it a Thumbs Up
Thank you very much! Nice to read from you again. I recently discovered that you are my first traceable subscriber... ♥️🐢
beautiful piece , good job
Thank you! 🐢
Отличная работа!
Спасибо!🐢
SO lovely!
Thank you! 🐢
great work
always amazed at your skill thank you for sharing.
Thank you for your nice comment, I'm very happy about that... 🐢❤
That spooky fog and eerie noises was so over the top and I LOVED it. Wunderbar!
Thank you 😅🐢
So cool💪👍
Thanks! 🐢
Great restoration! The sound from that extraction system you have for the paint sounds like you're either down in the Mariana Trench, or in space lmfao.
😅👍🐢
The engraving sent it over the top, wonderful job!
Thank you very much! 🐢
Marvelous restoration job. That scale looks a lot better than before. Excellent work.
Thank you so much for your great comment! 🐢
Eine absolut gelungene Restaurierung mit einem Superergebnis. Tolle Arbeit , mit viel Gedult und Wissen durchgeführt👌👍👍👍
Vielen lieben Dank für dein ganz tolles Feedback! Liebe Grüße 🐢
Super ! 🐢💚👏👏👏
Danke! 🐢
It's so beautiful...
Thank you very much! 🐢
ha enfin quelqu'un qui sait ce servir d'une lime pour faire les arrondis. Super boulot, Merci
Merci! Sinon, cela n’a presque aucun sens, non ?! 😅🐢
some heck of an intro!
Thank you very much! I'm very happy that you like it! 🐢
Класный видос, браво мастер. Лайкаю.
Спасибо! 🐢
У вас шикарные видео и черепашки такие милые🫠
Раньше я любила смотреть, как умельцы делают удивительные вещи из дерева и эпоксидной смолы - но теперь мне нравится смотреть, как вы реставрируете старинные металлические штуки😊
Лайк, подписка!
Спасибо и добро пожаловать! 🐢
That's superb, I love the white and great paint finish 😊
Thanks! 🐢
Very nice refurbishing of such an old rusty scale. Even with your iffy painting efforts (your alluding to) it still has such a regal look to the finished product. I say you made it look great... Thumbs Up!
Thank you very much! 😅👍🐢
Loudest restoration channel I've come across. I love it!
😅🐢
Всегда восхищаюсь вашими работами! Я занимаюсь ремонтом и немного реставрацией одежды, и люблю смотреть работу других мастеров.❤
Спасибо! Вы тоже сами снимаете видео? 🐢
@@ForgottenShineRestoration работу не снимаю, только своих собачек, для души. 😊
Very nice restoration - so many nice components including checking for lead and having a fume hood for spray painting (safety first!). I was wondering, is there a crack in the cast iron at 8:09 in one of the bolt holes? I couldn't tell, but I know those are tricky to braze (well, based on other channels). Great video!! 👍
Thank you very much! 🐢
Excelente
Thank you! 🐢
You could file off the sharp edges and rough spikes from casting.
Perfect. Hi from Turkey.. Best regards..
Thanks! Greetings to Turkey! 🐢
The unintentional overblowing of the mic is really funny
Great job on the restoration! A trick I saw for fine detail painting is to use a toothpick instead of a brush (if you don't have a tiny brush).
Oh, that's a good idea, I've done that before in another restoration. apparently I forgot this trick 😅🐢
Very nice
Thanks! 🐢
Wow!!!
Die Kreuzschlitzschrauben verderben das Gesamtbild.
Ja, leider wurden mir die falschen Schrauben geschickt und die Zeit war knapp. Geplant waren Schlitzschrauben... 🐢
Super jest ta waga odrestaurowana Pozdrawiam serdecznie. 👍👍👍👍👍
Dziękuję! 🐢
Formidable restauration !!! Bravo !!! 👍👍👍
Merci 🐢
That laser engraved dial is the centerpiece of that restoration.
Thats true... 🐢
Have you thought about using a metal base filler like JD weld instead of auto body filler?
I Also Do Restoration Of Old Rusty Machinery. I See You Do Very Well
The earplug-in-the-hole trick is a tip I’ve given on so many of these restoration channels that I don’t remember who all I’ve told it to. If you heard it from me, I’m glad you’ve found it useful. If you _didn’t_ hear it from me… well, I’m *STILL* glad you’ve found it useful!
Good restoration! The laser etched faceplate turned out very nice!
Unfortunately, I don't remember who gave me the tip. But I'm glad to know the tip...🐢
What software did you use to make the template?
Inkscape... 🐢
kitchen scale - кухонные весы; чешуя - scale of fish.
At this point, you've gained most of the skills needed to direct a small budget movie : )
It would be really cool to know where you are finding the things you rebuild, also how do you know all of the effort put into something is going to return something worth that effort? I mean, some of the things you fix are so covered in rust, how do you know that's good material underneath of it?
Thank you very much! These are really a lot of very good questions... I usually buy these items online, for example on eBay. Of course, I never know if the restoration will be successful, which is why I am always very nervous at the end of the restoration whether everything will look good again in the end... 🐢
Nic ❤❤❤
Thanks! 🐢
Nicely done! Did you coat the laser engraved scale with a clear lacquer? Also, would the depth of the laser engraving permit adding color to the scale?
Thanks, no I didn't put any varnish on it. Since the surface was already rough, I didn't dare put powder on it, otherwise everything might be colored and I didn't want that... 🐢
These turtles are the stuff of nightmares...
🤣🤣🙈🐢
Ich würde das Ding nie wieder zusammen bekommen...😂 tolle Arbeit !
Ich habe auch meine Aufnahmen vom zerlegen vorher nochmal angeschaut 😅🐢
Nice job , shouldnt the tip of the needle have been red ?
Good idea, I'm just not sure if the original is red?!🐢
A beautiful restoration but you should've payed a pro fine liner to do the paint
لماذا لم تنشر لحد الان
Not Spooky
That's a great restoration, but those outer number orientations are weird lol. No criticism on the restoration, I'm sure the original was like that. 😅
I litre of water = 1kg, so the addition of the bucket will total more than I kg therefore the scale isn't right.
In the subtitle I mentioned that the bucket is included in this one kilo... 🐢
Чувак, весы - это точный измерительный инструмент. В данном случае никакая реставрация не вернёт их к полноценной функциональности!
После реставрации они лишь выглядят как новые, но годятся лишь как декоративные, для музея.
I loved the intro!
On the other hand, the machines sounds were too loud and harsh. In older videos they were a little dampened more pleasant.
All in all, another beautiful restoration!❤
Thank you for your feedback! I'm working on reworking the sound, something seems to have broken, I noticed myself that something was wrong. It should be fixed in the next video...🐢
Well done, what is the name of the software you used ?!
Thank you! Davinci resolve...🐢
Wait . . . you painted it in green, but at the end the detail was all grey. Trick of the light, or did you repaint?
No, it's still green. you can actually see it worse due to the lighting..🐢
Great job 👍
Thanks! 🐢
أنا مشترك جديد✌️🇮🇶✌️
شكرا جزيلا ومرحبا بكم!🐢
Очень круто . Класс !!!
Спасибо!🐢
Great job 🇧🇷🫶
Thank you so much! 🐢
Amazing!
Replace the Phillips head screws with regular slotted head screws to be periodically correct.
Period correct
Nice👍🏻
Thanks! 🐢
Keep practicing the pin striping and use the proper brushes. It is a long hard craft to master.
Großes Kompliment 👍👍👍
Vielen lieben Dank! 🐢
Yeah, but would the painting have been perfect on an original unit? Probably not, so you made it look authentic. Painting freehand is not easy. Take it from a model builder. it takes quite a while and a lot of practice to get really good.
Thank you for your kind words! 🐢
Very good restauration,bad color,is green not grey
Awesome restoration! Precision masking tape might help with the painting as it's meant to be flexible enough to go around the corners while still giving you a crisp line.
oh yes, thats a good idea, thank you! 🐢
Это весы
Hello mister beautiful restoration beautifully restored well done
Hello... 🐢
Parabéns
Excellent
Good job
Thank you very much! 🐢
Is it equal parts of each for the flour, vinegar and salt mix? No matter how much or how little you want to make. Correct?
Exactly, you put the same amount of everything in 🐢
@@ForgottenShineRestoration awesome, thanks
Sehr gute Arbeit. Wo bekommst Du nur immer die alten Sachen her?
Vielen Dank! Die meisten Sachen beziehe ich über Ebay oder Kleinanzeigen... 🐢♥️
Do you offer this as a service? I have an old relaoding press from my grandma id love to have cleaned up. Though its no where near as in bad shape as this stuff haha
No, this is just my hobby😅🐢
@@ForgottenShineRestoration damn, was worth a shot
The audio gain on this vid is oddly amazing😂
Bravo
Thanks! 🐢
Что делать если будет свинец?
Я бы тогда снял краску средством для снятия краски, иначе при пескоструйной очистке она бы попала в легкие...🐢
@@ForgottenShineRestoration Спасибо!
а ну да! не русский же!
Que delícia vídeo seu❤. Amo demais uma oena que já assisti todos. Por mim queria vídeo seu novo todos dias🤩🇧🇷
Muito obrigado! Estou sempre ansioso por seus comentários. Que bom que você é um espectador tão fiel 🐢♥️
You can use a sandblaster for restoring hardware. You are wasting tons of time doing this by hand. I restore all my blots and any other bits in the sandblasting cabinet
Na, wenn das keine deutsche Qualitätsarbeit ist, dann weiß ich och net. Kann man nicht meckern.