Guys, Sadly i have to tell you that this week was been so difficult for me as most of you know that someone has hacked my channel a couple of days ago and that was a big concussion for us. But now i have recovered my self from this incident and Alhamdulilah our channel is back again on its platform.This was the reason, why am i uploading a new video after this long time period. This time i need alot of support from you guys as share this video as much as you can on all other social media platforms. So we let the hackers know that our youtube family is way more stronger then the think. You guys just fulfill your sharing duties so everyone would come to know that it is not easy to break us down. And with the help of Allah Almighty and support from you guys will make this youtube family more stronger than it was before. When the channel got hacked i did not stop working i did not lose my hope, spirit and strength, this was all possible because of the love you guys always gave me. And at the end i will request all of you to follow me on the Instagram so in future if we face any problem i will let you know there very closely, what is happening. Our Instagram = instagram.com/random.hands/ THANK YOU Best Regards Random hands
Yes, somehow there was a katana In the place of railway. Anyway the katana was so beautiful it ended up In a local museum. Many trains crashed Because of this.The case remains unsolved
Ещё лучше возьмите рессору от любой машины. Рессору делают из пружинной стали высокоуглеродистой кремнистой или марганцовистой. Но нужно хорошо знать термообработку (закалка плюс отпуск) и тогда клинок будет великолепным. Один минус он ржавеет. Хороша и ШХ15 и даже обыкновенная строительная арматурная сталь, она высокоуглеродистая. А высокоуглеродистые стали хорошо калятся. По молодости я из арматурной стали делал пешни для рыбалки, так им и сейчас сносу нет, точить не надо, заточил их 40 лет назад, по сей день как новые. Металлургия великолепнейшая из наук! Главная икона металлургии диаграмма железо-углерод! Интереснейшая картинка! Ватикану там нечего делать. Умеющим читать диаграмму голову никогда не задурить никакими чудесами.
a few tips on this nearly perfect sword, you could add a thin spacer both in between the tsuba and habaki, and in between the cap at the front of the handle and the tsuba. also, aesthetically, you might try putting the seam where you glue the leather onto the handle either on top or bottom so that you can't see it under the wrappings amazing job, keep it up:)
@@YoBoiHrcky "Subhanallah" expresses the astonishment and astonishment of the servants in the face of Allah's creation of the universe, works and all living things.
I hate this his talents are so unnoticed.. This is literally a gift he's sharing with us for free!! I would love to do an interview with him one day on my channel!!
These videos can be shared on Facebook. Spread the videos. If he is getting monetization from the videos, he can use that money to buy more tools, materials to make more stuff.
The reason the blade took more of a bend after heat treat is because Katanas are forged strate as quenched. The clay backing that you applied is what gives the natural curvature in the blade.
fun fact: Back in the days, the railways tracks were made of steel and the wheels of the trains were made of iron, because it was preferable that the wheels wear more than the tracks, they are easier to change.
Yes but how high carbon is the steel... that’s important when making a blade to know not only the hardness of the steel but also the quench temperature then you also have impurities stresses and brittleness to deal with after the quench not to mention the fact that he used this unknown steel to make a katana which is traditionally made with a high carbon steel exterior with a relatively pure iron interior meaning that the blade has the ability to bend but is hard enough to hold an edge... from all we know that blade could be mild steel and not hold an edge or it could be as hard as hardox and as brittle as obsidian... I’m just ranting because of the danger that could possibly hold if that thing was ever actually swung by a professional swordsman...
@@benben9794 as hard as you say, no , if the quench even hardened the blade, as you said it could be low carbon steel, the back would still be soft because he did a diferential quench (i think it's how is spelled in english) thus hardening only the cutting edge
@@kassiog.6595 yes this is true however I am trying to say that trying to harden an unknown steel is like doing chemistry based off of only sight it may work sometimes but sometimes it can kill you...
more interesting are his moves with that katana...when he sliced the bag on the bottom part and than in the miliseceond turned and sliced the bag in the half before the concrete even had time to fall out.
@Jesus is LORD Don't you have anything else better to do than try and shove your religion in people's faces? People like you are the reason why people like me avoid churches and religion.
How can a human be your lord? How is it possible for a god to have a specific race such as being white and then have brown, black and asian followers 😂 these are not questions, but fact for you to sit in a comfortable place and rethink about the lies you’ve been taught. Lastly why is there a “New” testimony 😂 thats what you do? Innovate and fabricate book? 😂
@Jesus is LORD I have a verse for your consideration from the Bible: Ephesians 6:5-8: “Slaves, be obedient to your human masters with fear and trembling, in sincerity of heart, as to Christ” If that’s where you derive your morality, no wonder so much human atrocity is derived from religion.
@@JR-st3mp also you discarded the next verse of the text that literally says And masters, treat your slaves in the same way. DO NOT THREATEN THEM, since you know that he who is both their Master and yours(A) is in heaven, and there is no favoritism(B) with him" If you actually read the Bible it never speaks about abusing anyone so stop hating on something YOU don't believe in If you dislike Christianity fine no one can stop you But don't shit in what others resorct
It is for those with a CLOSED mind and a CLOSED ❤Heart. The Lord Almighty never wrongs his creation .. Man does.. As we are free willed and do what pleases us and the general biased media.. Peace. May you find that door that will open your heart and mind.
I appreciate that you don't form the sword in the traditional style. Instead you use a tried and true method that you know well, you craft a far finer blade than you would trying something you may be unfamiliar with. Keep up the wonderful work friend.
@@hamzamoosa6680 allah does not exist. muhammad translated torah into arabic with a lot of tahrif. he was a fraud. did yiu ever ask yourself who introduced allah to people? well muhammad did, right? so How abdulmuttalib (his grandfather) knew allah to name his son as abdullah? you say his name was muhammad bin abdullah, right? how the grandpa knew the allah?!! think
*The video is so good that I want to watch it forever. I love this video. I come from Vietnam. I look forward to learning from you. Hope you guys support me. Wish you all healthy and happy*
this was amazing.. but whats even more amazing is the thought of people making these sword in ancient times when no machinery and they were making these all by a lot of thinking, muscle, heart and soul.
I wish i had a fraction of ur talent i could watch the process a million times and i dont think i could ever do something this good hats off to you and to all swordmiths and blacksmiths
Fellas like this don't need a mistress, b/c they have productive hobbies that they enjoy all of the time. What can really beat making something beautiful and even useful. Hey, one never knows . . .
قال رسول الله صلى الله عليه وسلم: (لأَنْ أَقُولَ سُبْحَانَ اللهِ، وَالْحَمْدُ لِلَّهِ، وَلَا إِلَهَ إِلَّا اللَّهُ، وَاللَّهُ أَكْبَرُ، أَحَبُّ إِلَيَّ ممَّا طَلَعَتْ عليه الشَّمْسُ). .
@@eloneg7085 The Prophet said: To say praise To God, and thank God, and no God but Allah, and God is the greatest i love from what The Prophet said: To say, Praise God, and thank God, and god only God, god is the greatest one who loved what he Which iWhich came The sun came up on him. This is a wall of the Qur'an of Muslims and you will never understand 💕
Rail steel is a good choice. The original section shown here looks like one of the lighter gauges given it was picked up so easily. Certainly a better material than the chain link.
Mad skill level!! Sword guy: I'm bored. I think I'm gonna make a soda machine outta this baby stroller and filing cabinet. 😳 Hour later... Sword guy drinking homemade soda
@@praevidens he pretty much didn't do anything in an authentic way, so this katana is garbage even though it's forget out of 100 times better material than what japanese people used.
@@wake-digital So why is it garbage if its better material? I don't understand your comment? Either this sword will stand up to the same punishment as one forged by a Japanese master, or it will not. Its a simple yes or no question.
Guys, Sadly i have to tell you that this week was been so difficult for me as most of you know that someone has hacked my channel a couple of days ago and that was a big concussion for us. But now i have recovered my self from this incident and Alhamdulilah our channel is back again on its platform.This was the reason, why am i uploading a new video after this long time period. This time i need alot of support from you guys as share this video as much as you can on all other social media platforms. So we let the hackers know that our youtube family is way more stronger then the think. You guys just fulfill your sharing duties so everyone would come to know that it is not easy to break us down. And with the help of Allah Almighty and support from you guys will make this youtube family more stronger than it was before. When the channel got hacked i did not stop working i did not lose my hope, spirit and strength, this was all possible because of the love you guys always gave me. And at the end i will request all of you to follow me on the Instagram so in future if we face any problem i will let you know there very closely, what is happening.
Our Instagram = instagram.com/random.hands/
THANK YOU
Best Regards
Random hands
@mr Sonu yt Hahahaha
May allah be with you
Thank god sir. You're back.
Im glad to see u again :)
Me dá uma por favor
2069: rusted katana forged into a beautiful RAILWAY
Yes
😂😂😂🤣😂😂🤣😂😂😂🤣😂😂🤣😂🤣😂🤣🤣😂🤣😂🤣🤣😂🤣😂😂😂😂🤣😂😂😩😩😩😩😤😤😤😤🥺🥺🥺🥺🥺🥺
😂😂😂😂😂
Thats a good one
hahhahahahah amazing man
8:47 *SUBHAN-ALLAH* ♥️😍
Aslamu alaikum
Hello guys i m from indonesia
@@hydroloric2123 sama
Sama indonesia juga muslim 🙏😍♥️
@@sukrinurbahtiar1359 assalamu'alaikum
seeing this guy go from handheld tools a couple years ago to the more advanced stuff he does now is a really amazing transformation
Definitely!
شباب البومب 8بدون من معي في كل مكان في العالم
naim
Hi
Please down your mask your are tooo beautiful
Hey random hands your portal days are over. Give me the Yamoto
Video idea: turning a rusted bolt into an
Imperial 2 class star destroyer
I wanna see him put it back on the railroad track.
You do know that it is impossible
Micheal reeves and mark rober need to see this
ua-cam.com/video/3NdTt8mMND0/v-deo.html
ua-cam.com/video/3NdTt8mMND0/v-deo.html
Random Hands will eventually own an armory.
Or a forge.
2045 Turning a rusty block of metal into a tank
Japan: ILL TAKE YOUR ENTIRE STOCK
zombie apocalypse: *happens*
random hands: it's show time
What master forged such a blade? A: The Great Random Hands!
Tomorrow's news: Train derails part of track unexplainably vanishes.
Yes, somehow there was a katana In the place of railway. Anyway the katana was so beautiful it ended up In a local museum. Many trains crashed Because of this.The case remains unsolved
@Ahmad El Husainy | أحمد الحسيني yes
🤣😅😅🤣
😶😶😶😶😶😶😶😶😶😶😨😨😨😨😨😨😨😨
And 5,000 people died, but hey we got a fake katana out of it
Ещё лучше возьмите рессору от любой машины. Рессору делают из пружинной стали высокоуглеродистой кремнистой или марганцовистой. Но нужно хорошо знать термообработку (закалка плюс отпуск) и тогда клинок будет великолепным. Один минус он ржавеет. Хороша и ШХ15 и даже обыкновенная строительная арматурная сталь, она высокоуглеродистая. А высокоуглеродистые стали хорошо калятся. По молодости я из арматурной стали делал пешни для рыбалки, так им и сейчас сносу нет, точить не надо, заточил их 40 лет назад, по сей день как новые. Металлургия великолепнейшая из наук! Главная икона металлургии диаграмма железо-углерод! Интереснейшая картинка! Ватикану там нечего делать. Умеющим читать диаграмму голову никогда не задурить никакими чудесами.
MashaAllah.. you’re hand had been gifted by God with special talent..
Yeah
Are you serious 😳
Hello muslim brother🥰
Alhamdullilah my hommies 😅
alhamdullilah brother
8:45 SUBHAN -ALLAH 🖤🖤
:v👍
@marcos Elicker??? I Don't know Portuguese
@@sakatagintoki9046 gua juga:v
You deserve to win "Forged in Fire" Championship... God bless you brother
Amar lagbe
@@khokanmondal5970 ki lagbe apnar
@@swarnendukhanra699 katana lagbe
it'll keal.
@@manish5209mk Haha definitely 😁
a few tips on this nearly perfect sword,
you could add a thin spacer both in between the tsuba and habaki, and in between the cap at the front of the handle and the tsuba. also, aesthetically, you might try putting the seam where you glue the leather onto the handle either on top or bottom so that you can't see it under the wrappings
amazing job, keep it up:)
The band-aid thing is hilarious.
I was cracking up 😂
Gonna need more than a band-aid if stabbed or sliced by this sword
Good joob
Why is your profile picture adorable?
8:45
SUBHAN - ALLAH 💗
Is he a Muslim
Ya at same time of aazaan
@@spunkymaniac9312 ye
What does that mean? I get the "Allah" part, obviously it means the islamic god, but what about that "subhan"?
@@YoBoiHrcky "Subhanallah" expresses the astonishment and astonishment of the servants in the face of Allah's creation of the universe, works and all living things.
I hate this his talents are so unnoticed..
This is literally a gift he's sharing with us for free!!
I would love to do an interview with him one day on my channel!!
Merhaba hocam
These videos can be shared on Facebook. Spread the videos. If he is getting monetization from the videos, he can use that money to buy more tools, materials to make more stuff.
@@nathanlewis5682 very true, I share his videos all the time.
Check out the videos on my channel bro💯💯🎯
@Mal Theri very true!!
Check out the videos on my channel when you get the chance
You’re literally 100 times smaller a channel than them. You’re calling him unnoticed? You just wants the views
I AM THE STORM THAT IS APPORCHING!
Lo mismo pense
Awesome job 😁👍
Glad to see you.
@@RandomHands me too 👍😊
@@RandomHands Hi Can U Make The Connor Axe From Assassin's Creed
keren banget 👍👍👍👍👍
@@MarekTabi u got a new subscriber😉
14:48 It is amazing to see how easily the brass parts fit on to the wood so precisely
Almost like this guy knew what he was doing.
8:46 subhanallah 🙏
is he muslim?
Alhamdullilah ya kan bro wkwk
Imtherevjimmy top global 6 kagura and im muslim too🤗
Assalamualaikum
I love Muslim
The reason the blade took more of a bend after heat treat is because Katanas are forged strate as quenched. The clay backing that you applied is what gives the natural curvature in the blade.
fun fact: Back in the days, the railways tracks were made of steel and the wheels of the trains were made of iron, because it was preferable that the wheels wear more than the tracks, they are easier to change.
well.. they still used those today so its not a big suprise or anything
Before this when the tracks were iron they didn't last even a year on the most used lines
Yes but how high carbon is the steel... that’s important when making a blade to know not only the hardness of the steel but also the quench temperature then you also have impurities stresses and brittleness to deal with after the quench not to mention the fact that he used this unknown steel to make a katana which is traditionally made with a high carbon steel exterior with a relatively pure iron interior meaning that the blade has the ability to bend but is hard enough to hold an edge... from all we know that blade could be mild steel and not hold an edge or it could be as hard as hardox and as brittle as obsidian... I’m just ranting because of the danger that could possibly hold if that thing was ever actually swung by a professional swordsman...
@@benben9794 as hard as you say, no , if the quench even hardened the blade, as you said it could be low carbon steel, the back would still be soft because he did a diferential quench (i think it's how is spelled in english) thus hardening only the cutting edge
@@kassiog.6595 yes this is true however I am trying to say that trying to harden an unknown steel is like doing chemistry based off of only sight it may work sometimes but sometimes it can kill you...
SUBHANALLAH ❤️😭
Sübhanallah
@@Sorman_20 yes
It's crazy how this guy is so young and have this much skill to make and restore stuff
Edit: 137 likes that the most I've ever got on a comment thanks
He probably started making stuff shortly after birth.
more interesting are his moves with that katana...when he sliced the bag on the bottom part and than in the miliseceond turned and sliced the bag in the half before the concrete even had time to fall out.
I can do it with his tools
How old is he?
@@thecurlycatastrophe8427 might be in his 20's now I seen one of the video from I think 2 years and he was a teenager
Give this katana to Roronoa Zoro. LOL!! 😂😂😂😂
16:44 that was really satisfying!!!
Yeah
I wish I had tools and a set up like yours at my disposal! You do such awesome and inspiring work.
@Jesus is LORD Don't you have anything else better to do than try and shove your religion in people's faces? People like you are the reason why people like me avoid churches and religion.
How can a human be your lord? How is it possible for a god to have a specific race such as being white and then have brown, black and asian followers 😂 these are not questions, but fact for you to sit in a comfortable place and rethink about the lies you’ve been taught. Lastly why is there a “New” testimony 😂 thats what you do? Innovate and fabricate book? 😂
@Jesus is LORD I have a verse for your consideration from the Bible: Ephesians 6:5-8: “Slaves, be obedient to your human masters with fear and trembling, in sincerity of heart, as to Christ”
If that’s where you derive your morality, no wonder so much human atrocity is derived from religion.
wow
@@JR-st3mp also you discarded the next verse of the text that literally says
And masters, treat your slaves in the same way. DO NOT THREATEN THEM, since you know that he who is both their Master and yours(A) is in heaven, and there is no favoritism(B) with him"
If you actually read the Bible it never speaks about abusing anyone so stop hating on something YOU don't believe in
If you dislike Christianity fine no one can stop you
But don't shit in what others resorct
8:47 SUBHAN ALLAH ❤️
MashaAllah
Your portal opening days are over Vergil, hand me the Yamato.
This guy would be the main blacksmith in the demon slayer anime
Lol
💌🙀🙀🙊🙊🙊💗💓💯💯☝️☝️👍👍
nah watch the real one japanese black Smith and compare
"Random Hands in the Swordsmith's Village Arc"
“Dad, why is this blade so heavy?”
“Because it held trains”
It feels the train weight. So it is a feeling that does coat 3.5kg weight.s
رح ارجع بعد بعد ٦شهور ورح اشوف كم واحد يحب الرسول صل الله عليه وسلم💕
6:28 was your Drill Singing?
Hahaha that was funny
And 10:25 the thing is singing
It was perfect until the last 2 notes
i was laughing so much
Beautiful
It's crazy how this guy is so young and have this much skill to make and restore stuff
Do U know him personally
plot twist: he's 80 years old
I feel very depressed and here I am,watching this at 3 am trying to forget my problems
Bless you. Hope you’re feeling better now
@@walkers198 thank you!
I hope you're feeling better 💓 💗
Hope you feel better, what helps me is going on short walks. U should try it!
I'm also depressed 😔😔
Masyaallah....very good job...from Malaysia 🥰🥰 9-2-2023
Imagine this guy pull out a full on 30 inch katana to open a bag of chips
Then it’d probably be nearing _odachi_ territory.
@@zsu-23-4shilka2 aren't kodachi one handed katana
@@Taz42O yes they are, but I said _odachi,_ which means “great sword” in Japanese; _odachi_ are actually larger than _katana_
@@zsu-23-4shilka2 ah I see I was confused by call of duty
He probably has like 50 of them lying around
8:48 .... Alhamdulillah..❤️❤️❤️
I am an Indian..
Really you were doing fabulous...
It's really true
He puts that poor angle grinder through so much. Can we all just take a second to appreciate all the hard work it puts in?
ua-cam.com/video/wvR6Y7kOfa0/v-deo.html
日本刀の本当の職人技、職人魂を観て又何百年の日本の伝統が今も引き継がれているのです。日本刀を甘く見ないで下さい。
He's Pakistani
Hammer 🔨 lifting like KGF CHAPTER 1 MOVIE🔥🔥🔥
I don't know why i am watching this video.But I am watching and loved it.
When he cut through the fish.
My Mind: It will Keeel
Keal
Subhanallah...Shollu alan nabi...
*Look at how meticulous it is to use a machine, it would have taken a lot of work to forge by hand in the past*
ừ
fr tho
The ones forged in the past are still better, folded blades are far better than a 0 fold steel bar. That being said it still looks amazing
It probably would have been a hassle to even find a railway back then in feudal Japan. Not to mention cutting a piece out of it.
@@Erebos931 🤣
Other seventeen year old girls: memes, pop music and beauty videos
Me: cool this guy makes all sort of awesome stuff
ahh the internet, there's something for everyone
You are a women of culture
Oohh yes I am a woman of culture oohh praise me strangers
The sound of rain, relaxing and healing music. Soothing rain sounds for sleep help you sleep and beat stress❤❤❤💕💕💕💕💕💕💕💕💕💕
It is said that the soul of the Smith is reflected in his work.
Well, the Katana you have said is absolutely beautiful.
Have you been lifting?
Rail Tracks are fucking heavy!
Everyone need this guy in zombie attack 😂❤️
If there is a zombie outbreak, y’all KNOW I’ll be pulling a Michonne and using a sword
@@amandafrancis2988 444444
fax bro lol
FREE FIRE😌
Very nice
2097: making a beautiful train out of an old rusted car
15:38 its beautifull 😍😍
This is the best made katana I have ever seen. Master bladesmith without a doubt
I was very happy when you said "subhan Allah " may Allah bless you
Yeah I noticed that to
Kaçıncı dakika?
Fantastic Bro.Finnaly after Hardworkig 3/5 years you bought your collection of Machines.Feel so Happy to see your worshop Machines.
Masya allah brother
Not just anyone can wake up in the morning and say "this morning I'm going to make a Katana out of a railroad track"!!! Beautiful work RH!!
ua-cam.com/video/uuLo_Jc0CJA/v-deo.html
Супер
And this guy didn't either.
it used to deliver goods and people. now its an instrument of death
Absolutely fantastic.. Maasha Allah
allah is an illusion
It is for those with a CLOSED mind and a CLOSED ❤Heart. The Lord Almighty never wrongs his creation .. Man does.. As we are free willed and do what pleases us and the general biased media.. Peace. May you find that door that will open your heart and mind.
@@313design6 احتمالاً یک ایرانی هستی. از 313 میشه حدس زد. ISLAM IS A SHIT WHICH DESTROYED US.
8:46 Subhan-allah
Masya Allah
Great work, great sword. But it is not how katana is forged.
I think that this guy is the forgeron of tanjiro
I appreciate that you don't form the sword in the traditional style. Instead you use a tried and true method that you know well, you craft a far finer blade than you would trying something you may be unfamiliar with. Keep up the wonderful work friend.
You have butchered grammer to its fullest.
@@chrislofterplodzzz thank you. Grammar was never my strong suit and I hope the edits I made improve the message.
@@Ranger_James38 Over the top mate. Excellent spelling, and punctuation.
@@chrislofterplodzzz thank you
however unless its made in the traditional way it cannot be a katana
Seeing that the katana is finished
Me:
LET'S KILL SOME DEMONS!!!!
if you slash a demon with this katana then the demon will feel like being hit by a train
Your portal hopping days are over Vergil. Give me the YAMATO
Subhan Allah
subhan illusion? allah does not exist. it is a fake thing created by a fraud called muhammad
Allahuakbar
@@satss5726 audubillah be carefull what you say
@@makarov1077 They are the ones whose hearts are sealed by Allah.
They are unable to say anything except of this rubbish.
@@hamzamoosa6680 allah does not exist. muhammad translated torah into arabic with a lot of tahrif. he was a fraud. did yiu ever ask yourself who introduced allah to people? well muhammad did, right? so How abdulmuttalib (his grandfather) knew allah to name his son as abdullah? you say his name was muhammad bin abdullah, right? how the grandpa knew the allah?!! think
*The video is so good that I want to watch it forever. I love this video. I come from Vietnam. I look forward to learning from you. Hope you guys support me. Wish you all healthy and happy*
45phut hon
Love you
i love when him says subahan allah
Nope
@Millennium dude wtf im muslim
And that's why I love and support recycle. ♻️
6:48 Looks like Making Ice cream on Road side of China....
Ice cream rolls... 😀😀😀😁😁😁
Imagine the tradicional way to do a legit japanese samurai katana. Beautiful video, congratulation for all that hard work.
Nice coop
A legit Japanese katana the metal is folded multiple times to make it much more stronger and durable
It's not about the amount of days but the passion of making these swords. Great job 🙏🙏🙏🙏
XXX
@@manochohan3192 tentacion
is very god katana👍👍👍👍👍👁👄👁
this was amazing.. but whats even more amazing is the thought of people making these sword in ancient times when no machinery and they were making these all by a lot of thinking, muscle, heart and soul.
I wish i had a fraction of ur talent i could watch the process a million times and i dont think i could ever do something this good hats off to you and to all swordmiths and blacksmiths
Gk bisa bhasa Inggris
Sou brasileiro, amante das artes marciais, samurais 🙏👏👏👏👏👏👏👏👏👏👏👏👏👏
All right, grandmaster, you made a high-quality katana out of rusty iron, your warm breath, master.
8:46 subhan-allah :)❤️
*Ma'sha'Allah very talented ❤️*
Fellas like this don't need a mistress, b/c they have productive hobbies that they enjoy all of the time. What can really beat making something beautiful and even useful. Hey, one never knows . . .
"The people who were trying to make this world worse are not taking a day off. Why should I?" - Bob Marley
The secret of your future is hidden in your daily routine. Successful people do daily what the unsuccessful only do occasionally
You're right ma, thanks for introducing me to expert scott butler of financial education
Most people don't invest due to ignorance
People are scared of investing because of high rate of scam in the business
There are scammers but real brokers are out there for investors
I think I'm blessed because if not I wouldn't have met someone who is as spectacular as expert Mr scott butler
Jesus, that was perfect
I'm a satanist
@@DAMAlama27 satan , that was perfect, haha
08:49
سبحان الله ❤
“It will Keal!”👌🏼👌🏼
When I watch these type of videos I always give like for there hardwork 🤛
I laughed at the bandage bit. I like seeing a little humor in these vids.
Who is watching in 2024
In his house if a thief comes
Then it will be the last mistake of that thief🤣
قال رسول الله صلى الله عليه وسلم: (لأَنْ أَقُولَ سُبْحَانَ اللهِ، وَالْحَمْدُ لِلَّهِ، وَلَا إِلَهَ إِلَّا اللَّهُ، وَاللَّهُ أَكْبَرُ، أَحَبُّ إِلَيَّ ممَّا طَلَعَتْ عليه الشَّمْسُ). .
What its means?
جزاك الله خير
جزانا الله وإياكم خير
@@eloneg7085 The Prophet said: To say praise To God, and thank God, and no God but Allah, and God is the greatest i love from what The Prophet said: To say, Praise God, and thank God, and god only God, god is the greatest one who loved what he Which iWhich came The sun came up on him. This is a wall of the Qur'an of Muslims and you will never understand 💕
8:47 you read SUBHAN-ALLAH
I’ve made a few knives from old tracks so I can only imagine how much harder a sword would be. Great job.
ua-cam.com/video/uuLo_Jc0CJA/v-deo.html
Dear apna contact no do mujhe aap ke wksp me aana hai
Rail steel is a good choice. The original section shown here looks like one of the lighter gauges given it was picked up so easily. Certainly a better material than the chain link.
초강력한 최강 사무라이 일본도👍💯
Lindo trabalho .imagina como os antigos faziam q trabalho era pra fazer . parabéns
Katana mase
០។០ផ០០ើ០
The cuts made by the katana look so clean...
O my LORD the Japanese are extraordinary people, disciplined and humble in so many ways!
lol
nice
This man's hands is no longer random,
their proffessional
Professional hands
what is this video? ua-cam.com/video/AKoGFJ-Dm7E/v-deo.html
Mad skill level!!
Sword guy:
I'm bored. I think I'm gonna make a soda machine outta this baby stroller and filing cabinet. 😳
Hour later...
Sword guy drinking homemade soda
Incredible watch you turn a pice of rusty steel into a work of art,
👏 Baba set Bon
Katana ❤
How to destroy millennial Japan history in 16 mins.
Lol😂XD
?
@@praevidens he pretty much didn't do anything in an authentic way, so this katana is garbage even though it's forget out of 100 times better material than what japanese people used.
@@wake-digital esse não é o intuito do vídeo mano
@@wake-digital So why is it garbage if its better material? I don't understand your comment? Either this sword will stand up to the same punishment as one forged by a Japanese master, or it will not. Its a simple yes or no question.