High Performance Tire Firewood Chopping Block- Easy Splitting
Вставка
- Опубліковано 21 вер 2024
- I've build a few different chopping blocks with a tire. Through trial and error, I've come up with the best design for splitting firewood for all size pieces of wood. I hope you find this video helpful. Please comment and subscribe.
Thanks!
Great! I built a "table" from 4 x 4"s screwed together. Nearly destroyed it in 3 hard days of splitting. 6 x 8 timbers and 4 x4's with the right tire and I"m off and running. Cant wait to try this... thanks a bunch!
Thanks for commenting. Please send an update with your results.
Great work. Refining the details of the already popular tire chopping craze.
Thanks, it took a little trial and error to figure out this design. I'm still happy with it.
Thanks Mark. I tried splitting wood a couple of weeks ago and it didn't go so well. Just watched this along with your video on how to "read" the wood. These primers will definitely help. I'm subscribed and will definitely return to your channel.
+Patrick McKenna Cool, I have a couple videos coming up that feature Helko Axes and Mauls.
for anything over 18", a rubber tie down strap and a length of chain works beautifully.
This is a brilliant design. I'm going to pass it along.
Thanks!!
perfect. just what i was looking for.
This one is still holding up well. I drilled a few holes in the bottom of the tire to let rain water drain out.
Thanks
😎👍
Good idea , Mark
Thanks 👍
For what it's worth, that second axe that you use is a felling axe not a splitting axe. It's meant to be used for chopping trees down (i.e. it cuts against the grain) not really for splitting wood. Its not huge problem, but just not the exact right tool for the job.
I never really planned to use if for splitting, but it really does a great job on the smaller stuff.
Your video was very helpful. thanks for posting it.
9251finley1 You're welcome! Thanks for taking the time to comment.
Love it!
Thanks!!
How do you move it? looks too heavy to just pick up? Why dont you make the wooden base with rounded corners same diameter as the tire.??? then to move it you just push it over and roll it.
I ended up taking some thick rope and fasting one end to the bottom right timber and the other end to the bottom left timber. The rope was just long enough so it could be pulled around by lifting it just high enough off the lawn to move it like a sled. It really moves pretty easy that way.
Awesome sir, just awesome!
+Sean Pearson Thanks, I wouldn't change a thing with this tire chopping block. I just used it in a video I'm uploading soon... The Wilton Maul review.
Is that tire attached or sitting loose?I am going to build this today.
I found some lag bolts to screw it down. It's held up well over the years.
Thanks!
How has this held up? Thinking of making one out of some pine railway sleepers but not sure they'll stand up to a 6lb mail.
This design has held up very well. The thing that wears first is the piece of timber that the firewood sits on when splittting.
I'm sure you have that tire fastened in some way to the foundation. I missed that part...
I have lag bolts and added a washer to hold it down to the wood.
Cool
😀👍
Great video! I have some questions about the blocks. Are those 8x8 and what are the length? How did you fasten the blocks to each other? Thanks!
+stevem174 I believe they're 6x8 timbers. I used FastenMaster Timber Screws. They install quickly and are very strong.
fun! great
Thanks!
Great video mark!!....since I do live in Germany I just might get me an ochsenkopf.
Am hesitating a little bit since I don't like real heavy splitting axes that much but its nice to see how good of a job German products do.
Tomorrow I will be finishing my job,chopping up the rest of my hard wood. I am still all for my fiskars x17.
I will get the limited edition - fiskars 365....that bad boy is also an x17 but with an longer handle plus a silver coating on the blade,all black handle and the topping of the cake is that everyone has its own serial number on it!. Ready to be registered online. There are only 100.000 made.
What's you're opinion on that matter?.
Did you get the idea from Wranglerstar's channel?! Sure is a good idea!! Nice looking axes, but I can't stop buying those Granfors Bruks axes, just my all time go to ax now! Cheers!
I actually published my video a month before Wranglerstar did. I still use this same chopping block all the time and it's held up great. Someday, I'm going to try out the Gransfor Bruks. Cheers!
Awesome!! Love watching better ways to split wood, I have to heat my home with wood, so nothing better than finding better ways, thank you so much for posting!! Cheers n' beers Sir!~!
Cheers n' beers!!
Any significance for the tire other than holding wood in place?
The tire holds the wood in place and is a bumper for over/under strikes, Keeps the axe from hitting the ground. The 1 or 2 tire setup is just for the height, so it's below the wood a little bit.
is the tire just resting freely on top of the 2x4's? Or is the tire somehow "adhered" to the entire unit?
I installed the tire with lag bolts. It's very secure.
Use washers aswell for even more tiedown
nice
awesome bro thanks!
***** You're welcome!
Mark, is there something besides a tire I could use? I live in the suburbs and the association (and wife) wouldn't like a tire. Thanks.
I've heard of people tying a rope around it to keep the wood from flying. I'm not sure if a loose bungee cord would work. I'd just hate to see something under high tension snap and go flying. The tire is my favorite and it's inexpensive.
@@MarkThomasBuilder thanks
Sorry for your trouble..
Nice video. What editor do you use?
Thanks! I just use iMovie. Eventually I may go to Adobe Premier or Final Cut Pro.
similar to wranglestar, also on you tube. your setup may be better design?
+stoolie10 Thanks for feedback. I watched both videos and noticed my design went together faster with Lag Screws, even though it may cost $3-$5 more in parts. I prefer my low profile tire size and the fact that it's shimmed up 3.5 inches from the part that the firewood sits on. That difference allows the bark to fall through and virtually no cleanup inside the tire. If someone see's an improved to the design, please comment.
Thanks, do you screw them in at an angle? I cant get my drill in at 90 degrees.
Davehiphop I put the screws in at a slight angle. In this video, I have a low profile tire (short sidewall) and that makes it easy to fasten it to the wood.
not bad bruv
Thanks!
15 inch or 18 inch?
I went with a larger tire so I can fit 2-3 pieces in there at a time. I believe it's 18".
What is the dimension of the wood you used to build it?
I believe the bottom pieces are 6x8 treated timbers. The upper parts are 4x4's. I may have to make a blog post about it showing the exact dimensions and directions.
You swing the axe like you're scared of it
I don't like to over swinging if I don't have to and have the axe hit the tire.
Tires work better if you cut the side walls out
Thanks for the advice.
I couldn't see the "pitcher" he was talking about.
+A Lu I should've said that the word "view" instead of "pitcher".... I said I'll show you a "pitcher" of the high end German forestry tools.
Hi, how do you screw the Tyre on?
Davehiphop I use 4@ 3.5" Spax brand lag screws. They have built in washers that holds the tire securely to the wood.
Im confused today
Waste of lumber. Three tires stacked chopping block round or stump in bottom. Bolt the middle and top tire together and done. Lumber is expensive and this is an utter waste of expensive kiln dried lumber.
You haven't been splitting wood long have you
I started splitting wood when I was a kid. When I was 12, I got a chainsaw for a Christmas gift.
@@MarkThomasBuilder What Jimmy Hagar is getting at is your awful form. How have you been splitting for all these years and still manage to look like such an amateur?
Great video mark!!....since I do live in Germany I just might get me an ochsenkopf.
Am hesitating a little bit since I don't like real heavy splitting axes that much but its nice to see how good of a job German products do.
Tomorrow I will be finishing my job,chopping up the rest of my hard wood. I am still all for my fiskars x17.
I will get the limited edition - fiskars 365....that bad boy is also an x17 but with an longer handle plus a silver coating on the blade,all black handle and the topping of the cake is that everyone has its own serial number on it!. Ready to be registered online. There are only 100.000 made.
What's you're opinion on that matter?.
Great video mark!!....since I do live in Germany I just might get me an ochsenkopf.
Am hesitating a little bit since I don't like real heavy splitting axes that much but its nice to see how good of a job German products do.
Tomorrow I will be finishing my job,chopping up the rest of my hard wood. I am still all for my fiskars x17.
I will get the limited edition - fiskars 365....that bad boy is also an x17 but with an longer handle plus a silver coating on the blade,all black handle and the topping of the cake is that everyone has its own serial number on it!. Ready to be registered online. There are only 100.000 made.
What's you're opinion on that matter?.
I really like the Ochsenkopf axes and mauls. Their steel is very high quality. They offer several options as far as the weight of their tools. Thanks for the comment Alan!