When I was walking through the Connecticut Barber expo. There wasn’t one person at the andis booth… that should definitely tell us something. This company does not give two shits about Barbers!!! But thanks for the Content tank!!!💪🏻💪🏻💈💈
Tank I think from looking through the comments a lot of the younger guys are all about cool looks and stuff, there is no need for andis to switch up how the tool looks, andis is the holy grail company of clippers. These hit like a hot knife through butter, and I personally prefer a heavier trimmer because the weight makes it feel more secure in my hand.
Thanks for the heads up tank, plenty of better options nowadays in the trimmer game. I've been using the Boost FX for everything and the Stylecraft Evo for kids cause of the soft blade. Much love, stay blessed.
I have about half a dozen corded andis outliners that are 20-30+ years old still going strong. The freedom of the cordless products is hard to give up, but their reliability has always been bad.
The reason the gtx snags is because the tension from the spring isn’t tight enough to the blade I bend my springs back a little for tighter tension now the EXO is my favorite trimmer
They made them look cheaper. The Clipper and the blade were both engraved which showed a little bit of quality.. I just bought replica babyliss blades that were being sold as real. They’re easier to counterfeit with logos that are just printed on
Bruhhhh after centuries in the game ....I think they would took over the cordless market ....but they are failing.....I guarantee they don't barber on the consultation team
Thank you! I ended up getting the original version of the GTX EXO a few months back on Amazon during a 1 day flash sale for about $90 after taxes. I recently saw these and was wondering if there was an improvement.
I adjusted them several times they still snag. One screw rattled almost all the way off and they are pretty loud. Finally got rid of them and exchanged them for the bespoke hoping for better results. Also looking to get the stylecraft cyborg clippers.
If they get clogged up i would recommend getting an air compressor (ca air tools makes a good quiet one) I keep the hose close by so I can clear the clogs and also blow the hair off the clients neck U can also use a keyboard air duster in a can for cheap route but I highly recommend the compressor , if u spray w cool care and blow it out itll be ready to go Also the shorter blade one(old ones) are better and debulking and the longer ones are better for lining black or course hair 👍
after thinking buying it... i got the OG styliner 2... and want to try something new... and after reading ALL but very ALL comment under this post... i think is time for me to try something new with the babyliss that seem to be the leader in this game these day... hope i will not regret
I notice when using andis trimmer to much oil will cause it to grab hair.. I had to clean all the oil off the blade and on the cam follower and spray it with clipper cleaner and it started working perfectly
I’ve been to several classes featuring Andis trimmers and they mentioned time and again they r not made for interior work. They r made for edge work. They r not designed to debulk. I love mine. But when it comes to that interior work I throw on a 00000 on my clipper and get at it.
Yo tank. I was messin wit my barber bros andis gtx evo n i swapped the cutting blade from the silver gtx blade and set them not fully zeroed and bruh .....they hit hard !!
The only thing keeping andis relevant is probably still being able to sell the cordless masters even though they last like 3 months before they turn into a 1997 Honda civic. Their downfall is making new things that stink and recreating old items that also kind of stink, they really need to hit the drawing board and create something that barbers actually desire.
Andis, Wahl’s, oster, are relics, and in 10 years we won’t even know who they are. Even though Stylecraft uses some manufacturer from China they still put out the clippers. You can get it straight from the manufacture if you want. I’m fabulous as well. Sean will have another clipper company that will takeoff and innovate.
I’ve got the original one a next mate in has one the owner of our shop has one we can’t get any to cut We put more tention on the blades by bending the springs. We changed the blades. Waste of money
Bro plz if you help me about that, i have it but it is not good for bulk hair (skin fade) just for line, how can i get different blade to be better for skin fade not be stuck , i think we have 4 different blades Andis , and i fo jot know which one is better for skin fade? Thanks alot
Being a long time barber from where Andis was the best at one time and now slowly fading away because Stylecraft has taken over the industry these days 🤷🏿♂️
No they haven’t. Half their lineup with a power button not switch will fail eventually. That’s their number one problem. Not saying andis is the better option but stylcraft has not taken over. Not yet at least
It’s just too obvious bro… Babyliss has the game in a chokehold literally there’s no reason to buy anything from the old clipper companies anymore. Babyliss is the solution for Cordless******* barbering tools. It is what it is and btw thanks for saving my yet again $150 bro ❤️
Babyliss hit the ground running with good Clippers and trimmers but the look of them is what really sold them. No other company has put out as many color options or the option to customize so babyliss stomped over the game by default.
There’s no point using them anymore. You can use a tiny flex trimmer from Stylecraft or even the new rebel and you can have hitters that pulled out and they have to size. Get those big clunky VCRs out of here.
I personally think theyre done for, the new products just perform too well, only thing andis wins is plastic and build quality but babyliss is right there with that
@@jcramirez77 I agree they’re not done for yet, but if they don’t start finding ways to innovate like these new companies, people aren’t gonna buy them. People are gonna know the Andes or wall in 10 years if they don’t find a way to compete.
They won't go anywhere just because adults will pay for nostalgia. You right tho these other brands been apply pressure , while these mfer won't even at least redesign/update the color ways on the products. If these mfers gold out one more product I know something 😂😂
they made em cheaper lol! they look the engraving away and made it black writing that will fade off over time and! they took the gold plate off the charger and again just gave you a cheap andis symbol that will defiantly wear off over time the first model is defiantly more premium. i fee like thoes changes were made to cut costs on their end so they can make more money ridiculous.....
la marca Andis (( ó mas bien el CEO )) perdió mucho terreno en el tema de sus maquinas que utilizamos los barberos, y no es en un solo producto; es en todos sus productos que ya no tienen mayor innovación o generar grandes expectativas mejores que las de antes tenían para ofrecer al mercado tan competitivo que es el de hoy. ya comprar la marca es pensarlo tres o cuatro veces antes de hacerlo pues la competencia tiene algo mejor y/o mejor precio que ofrecer
Bought these and immediately got rid of them. They felt slow and battery wasn’t great. Worst of all was the blade. idk what they did with it but it was the worst trimmer blade I’ve ever used. I’ve never really had any problems with blades some hit better than others obviously but these were TRASH. Couldn’t even do a line up around the ear without pulling and getting clogged. Never will buy Andis again. Honestly surprised they’re in business still
Bro plz if you help me about that, i have it but it is not good for bulk hair (skin fade) just for line, how can i get different blade to be better for skin fade not be stuck , i think we have 4 different blades Andis , and i fo jot know which one is better for skin fade? Thanks alot
the old 1 has the og gtx blade. the new 1 has the gtx Z blade.. same blade on the bespoke... that's the only difference
ahh ok. Thanks for that
When I was walking through the Connecticut Barber expo. There wasn’t one person at the andis booth… that should definitely tell us something. This company does not give two shits about Barbers!!! But thanks for the Content tank!!!💪🏻💪🏻💈💈
Tank I think from looking through the comments a lot of the younger guys are all about cool looks and stuff, there is no need for andis to switch up how the tool looks, andis is the holy grail company of clippers. These hit like a hot knife through butter, and I personally prefer a heavier trimmer because the weight makes it feel more secure in my hand.
Thanks for the heads up tank, plenty of better options nowadays in the trimmer game. I've been using the Boost FX for everything and the Stylecraft Evo for kids cause of the soft blade. Much love, stay blessed.
These do work great for lining. I will say that
My go to trimmer right now is the old school corded gtx paired with the “rebranded” gtx blade. Idk but It hits
I have about half a dozen corded andis outliners that are 20-30+ years old still going strong. The freedom of the cordless products is hard to give up, but their reliability has always been bad.
The reason the gtx snags is because the tension from the spring isn’t tight enough to the blade I bend my springs back a little for tighter tension now the EXO is my favorite trimmer
Can you please explain how you made this adjustment?
Yes, please explain a little more. Thnx 👍🏿
They made them look cheaper. The Clipper and the blade were both engraved which showed a little bit of quality.. I just bought replica babyliss blades that were being sold as real. They’re easier to counterfeit with logos that are just printed on
That’s exactly how my FX3 trimmer blade was acting up makes me not want to use the Fx3 but going to do the philthy Blendz Mod
Bro andis need a new creative design team smh theyre falling on their face, appreciate the review tank
They trying man. At least I hope. I want to get a pair of masters tho
Definitely agree 🎯
@@ElevatingInLife right thats what i meant, agree 100 percent, shouldve worded it better
Bruhhhh after centuries in the game ....I think they would took over the cordless market ....but they are failing.....I guarantee they don't barber on the consultation team
Exactly they should be focusing on battery life not rebranding
Thank you! I ended up getting the original version of the GTX EXO a few months back on Amazon during a 1 day flash sale for about $90 after taxes. I recently saw these and was wondering if there was an improvement.
These always snag for me when balding. I don’t use at all anymore honestly. I bought the philthy blends attachment to put the goldFX blade on it.
i have to agree but i already bought it so i'll just use more oil
Mine pulls like crazy too I changed the blade still pulls
Just bought the old ones on Amazon. The new one had worse reviews so I got the old one. Hopefully I made the right choice
I adjusted them several times they still snag. One screw rattled almost all the way off and they are pretty loud. Finally got rid of them and exchanged them for the bespoke hoping for better results. Also looking to get the stylecraft cyborg clippers.
If they get clogged up i would recommend getting an air compressor (ca air tools makes a good quiet one)
I keep the hose close by so I can clear the clogs and also blow the hair off the clients neck
U can also use a keyboard air duster in a can for cheap route but I highly recommend the compressor , if u spray w cool care and blow it out itll be ready to go
Also the shorter blade one(old ones) are better and debulking and the longer ones are better for lining black or course hair 👍
I think those should only be used for the lining up but still clean nice work.
They nice for lining
after thinking buying it... i got the OG styliner 2... and want to try something new... and after reading ALL but very ALL comment under this post... i think is time for me to try something new with the babyliss that seem to be the leader in this game these day... hope i will not regret
Looking forward to hear about the modification
I notice when using andis trimmer to much oil will cause it to grab hair.. I had to clean all the oil off the blade and on the cam follower and spray it with clipper cleaner and it started working perfectly
Slimline pro li works best for debulking
either put the og finetooth blade or the babyliss mod and best hitter there is ..
I’ve been to several classes featuring Andis trimmers and they mentioned time and again they r not made for interior work. They r made for edge work. They r not designed to debulk. I love mine. But when it comes to that interior work I throw on a 00000 on my clipper and get at it.
I like the new look !
The new logo is dope no lie
can you get n review the new cordless masters..
Trying to get my hands on them
Yo tank. I was messin wit my barber bros andis gtx evo n i swapped the cutting blade from the silver gtx blade and set them not fully zeroed and bruh .....they hit hard !!
Nice. May try that
The only thing keeping andis relevant is probably still being able to sell the cordless masters even though they last like 3 months before they turn into a 1997 Honda civic. Their downfall is making new things that stink and recreating old items that also kind of stink, they really need to hit the drawing board and create something that barbers actually desire.
Andis, Wahl’s, oster, are relics, and in 10 years we won’t even know who they are. Even though Stylecraft uses some manufacturer from China they still put out the clippers. You can get it straight from the manufacture if you want. I’m fabulous as well. Sean will have another clipper company that will takeoff and innovate.
🤣🤣👌
Magnetic over Rottery motor all day.... I'm sticking to the corded series...
I get it
I’ve got the original one a next mate in has one the owner of our shop has one we can’t get any to cut We put more tention on the blades by bending the springs. We changed the blades. Waste of money
I did a review on them, and maybe I got a lemon, but they were the loudest trimmers I’ve ever used.
Yeah they shouldn’t be too loud out the box
I appreciate what you do man! Big time motivation and respect brother!
@@TankBeChoppinyo a mi Andis Master le puse la blade movible de cerámica y ya no hace ruido
Thanks for the video, good content
Glad you enjoyed it
Do a review on the Cocco hair pro trimmers
I gotta get my hands on em
Stylecraft and babyliss has took over the clipper game
I agree
Let's go from Oxnard, CA! First comment.
This sad to see coming up with andis they falling off just dropping same stuff they gotta come out the box
White lube grease on the cam follower will reduce noise.
White lithium grease?
Noise really wasn’t the issue for me
Did you oil them?
They not hair clippers they are t liners for lining up hair.
Bro plz if you help me about that, i have it but it is not good for bulk hair (skin fade) just for line, how can i get different blade to be better for skin fade not be stuck , i think we have 4 different blades Andis , and i fo jot know which one is better for skin fade?
Thanks alot
Being a long time barber from where Andis was the best at one time and now slowly fading away because Stylecraft has taken over the industry these days 🤷🏿♂️
No they haven’t. Half their lineup with a power button not switch will fail eventually. That’s their number one problem. Not saying andis is the better option but stylcraft has not taken over. Not yet at least
Great debate
Are you sending them back? How do you like them overall? I do not care about the logo at all. So are you keeping them?
Na. Why would I send them back
@@TankBeChoppin🤣🤣🤣
First one through the door NOTIFICATION GANG😎
Aye lol
@@TankBeChoppin i moved to Korea yesterday bro lol its 3am here talk about major jet lag 😂 still tapped in though
Wich one is better? New or old?
Eh lol
Why does it come with guards?
Is it worth buying? Do you think Andis saber or wahl detailer?
Saber or detailer for sure
@@TankBeChoppin You recommend the saber trimmer, right? I hope I don't regret😊
@@kenan_6860get the andos gtx think its better tbh
What are good trimmers for balding?
It’s just too obvious bro… Babyliss has the game in a chokehold literally there’s no reason to buy anything from the old clipper companies anymore. Babyliss is the solution for Cordless******* barbering tools. It is what it is and btw thanks for saving my yet again $150 bro ❤️
Babyliss hit the ground running with good Clippers and trimmers but the look of them is what really sold them. No other company has put out as many color options or the option to customize so babyliss stomped over the game by default.
Old clipper companies? Babyliss is made by con air…that’s an old clipper company lol
Man I was just about to buy these but after seeing ole boi lose interest in that Modelo I said fuc it!! 🤣🤣🤣
There’s no point using them anymore. You can use a tiny flex trimmer from Stylecraft or even the new rebel and you can have hitters that pulled out and they have to size. Get those big clunky VCRs out of here.
Lol
🤣🤣🤣
My brand new My GTXEXO for some reason...it's CHOKING.
WHY ANDIS???
Bend the tension spring
Andis and Wahl need to get it together or they are going to die. Competing with gamma and babyliss 🤦🏾♂️
Shoutout from Korea bro 😎
I personally think theyre done for, the new products just perform too well, only thing andis wins is plastic and build quality but babyliss is right there with that
@@jcramirez77 I agree they’re not done for yet, but if they don’t start finding ways to innovate like these new companies, people aren’t gonna buy them. People are gonna know the Andes or wall in 10 years if they don’t find a way to compete.
They won't go anywhere just because adults will pay for nostalgia. You right tho these other brands been apply pressure , while these mfer won't even at least redesign/update the color ways on the products. If these mfers gold out one more product I know something 😂😂
Andis,Wahl, and Oster are always going to sell they are like the retro Jordan sneakers
they made em cheaper lol! they look the engraving away and made it black writing that will fade off over time and! they took the gold plate off the charger and again just gave you a cheap andis symbol that will defiantly wear off over time the first model is defiantly more premium. i fee like thoes changes were made to cut costs on their end so they can make more money ridiculous.....
Sounds about right
These or whal detailers
Please answer someone… which one for facial beard goatees?
I think the tooth is different
79.99 is max I’ll pay for them lol
Seen this machine having issues with the motor stuttering.
There nithing nee bwsides thr logo
They are not made for bulking !!
la marca Andis (( ó mas bien el CEO )) perdió mucho terreno en el tema de sus maquinas que utilizamos los barberos, y no es en un solo producto; es en todos sus productos que ya no tienen mayor innovación o generar grandes expectativas mejores que las de antes tenían para ofrecer al mercado tan competitivo que es el de hoy. ya comprar la marca es pensarlo tres o cuatro veces antes de hacerlo pues la competencia tiene algo mejor y/o mejor precio que ofrecer
Bought these and immediately got rid of them. They felt slow and battery wasn’t great. Worst of all was the blade. idk what they did with it but it was the worst trimmer blade I’ve ever used. I’ve never really had any problems with blades some hit better than others obviously but these were TRASH. Couldn’t even do a line up around the ear without pulling and getting clogged. Never will buy Andis again. Honestly surprised they’re in business still
Yeah well. Let’s see what they do
🫡👑💈
Good vid. I’ll pass
wouldn't waste my money on this 1 so I'll pass 😑
I never liked any andis product ever !
Bro plz if you help me about that, i have it but it is not good for bulk hair (skin fade) just for line, how can i get different blade to be better for skin fade not be stuck , i think we have 4 different blades Andis , and i fo jot know which one is better for skin fade?
Thanks alot