2021 Pre-built Scavenger PC build
Вставка
- Опубліковано 8 вер 2024
- *Invest in yourself! Use my link and check out the first chapter of any course for FREE! : bit.ly/3bKGAM6
For some Noob-Friendly, Dawid-approved T-shirts, and more, shop dawiddoesmerch...
I build Anna a new PC. but because of the parts shortage, I have to scavenge some of the core components from Pre-Built gaming PCs.
-Here is a link to my Patreon page, it would be awesome if you check it out: / dawiddoestechstuff
Follow me on whichever Social media you don't hate
Discord: / discord
Twitch: / dawiddoestechstuff
UA-cam: / hardonhardware
This video was sponsored by DataCamp
Last time I was this early, RTX 30 cards were in stock.
Jk, no one is that early.
fr
@@theviscount4622 I was about to ask if you were a bot. 😅
@@DawidDoesTechStuff we are all robots deep down inside, but slow.
in my country rtx 3000 rx 6000 and ryzen 5000 are ALL on stock but they are so damn expensive on the country's biggest retailer
Patriot cool nick name for ram dims.)
“The k stands for koverclock I guess” lmaoo
Jesus is the way to heaven
Time is running short. Believe and confess to Jesus and stop putting him aside before it is too late. Jesus is the only way to heaven. Not by works or by going to Church every Sunday (not saying stop attending)
John 14:6 “Jesus answered, "I am the way and the truth and the life. No one comes to the Father except through me.”
Romans 10:9-10 “If you declare with your mouth, “Jesus is Lord,” and believe in your heart that God raised him from the dead, you will be saved. 10 For it is with your heart that you believe and are justified, and it is with your mouth that you profess your faith and are saved.”
Spread the word God bless
that is the kind of thing that keeps me watching this channel
@@unsettled_5 Fuck people that use bots God bless
@@virtualtools_3021 everywhere I go, even my own channel, I see you
@@unsettled_5 can Jesus do something about the availability of GPUs?
That motherboard/ram/cooler combo together has got to be one of the nicest and cleanest combinations I've ever seen. Everything just looks like it fits in so well.
everyone gangsta till the gpu shows up
David: Worries about thermals and fan noise
Anna: Notices the top fans cat ears instead
Typical woman, I guess
@@plaguis1391 There is always a "silver-lining".
They were obviously mouse ears -not cat ears. Women 🙄
Everyone gangsta’ until you have to buy a 1660 Super for $450.
I have seen 1650 supers for 500 dollars on amazon
Granted I bought it back when GPU prices were high, but still kind of reasonable, but I genuinely just said “fuck it” and bought an RX 5600XT because 1660 supers were even higher than the 5600XT
I bought a 1660 ti for $300 y'all I'm gonna cry
I'm glad I bought mine one year ago, for 240 €
Bought a 1080 ti used for 350€ 😄
That graphics card looks like a bathroom from the 1970s.
Haha!! Yeah it is pretty Ghetto looking.
You are truly a master wordsmith.
It might do, if the colour was avocado
nope , I was around then , nothing like it.
9:13 ass Valhalla now that's something i can get behind lmao
That one gave me a chuckle too
“get behind” I see what you did there.
Get behind is the key herr
where you go after taco bell
Yo that’s actually a dope case
Agreed!!
Bruh its true
mhm
Doesn’t seem like there’s a lot of space for cable management
Its really awesome! And relatively available, unlike most other ITX cases.
I have this case and can say that a regular cooler can work as well with that extra space. Also, I recommend doing 2 intake on the bottom and flip the 2 top fans for exhaust and have them on a fan controller.
1 fan on bottom intake and 1 top exhaust above cpu. Will be much better!
I can't wait for the 3050 card to be released.. just so I can hear Dawid pronounce it!
Tree fiddy
Thank god I bought my pc before this whole mess
That's awesome! I'm glad you beat the drought.
I just got a gaming laptop instead.
@@gp3328 ...what
@@gp3328 it is fine tho
Right?!!? Mine isn’t amazing but I got an rx580 and ryzen3 3300x keeping the whole build around $600
Yo just wanted to say love this channel I think it's so underrated, I like how you have a more personal but yet funny approach to tech whereas others are more sponsor and money focused (cough linus cough) keep it up
Dawid: 197k subscribers, self-employed (with occasional assistance from Anna)
Linus: 12.7M subscribers (and that's just the LTT channel), CEO/owner of Linus Media Group, multiple employees
You're comparing chalk with cheese.
@@DraftySatyr I mean like ur right but still linus doesn't even include good humor anymore he barely puts effort into his vids and like I mean who needs 5 million fricking channels which are all the same thing at this point
@@DraftySatyr Exactly why I don't like Linus. Too corporate, too much of a tech hypebeast. I like the more humble channels.
@@DraftySatyr yeah, it's not fair to call Linus corporate and money focused when he's literally got a company revolving around the channel, what would you expect him to do??
"scavenging parts from prebuilt"
"ok, we get the cpu and the gpu from prebuilts, everything else is retail"
You can improve cooling a lot in the NR200 with a bottom-to-top airflow (maybe some slim fans pulling air in under the RX5700). You can also side-mount a fan to blow towards the CPU top-down cooler, or try the Noctua C14-S - they work great in this case with the mesh panel.
If necessary Dawid I would exhaust the rear most fan by the CPU/Motherboard area. It actually helps a lot with the heat produced. Nice clean build and I want that case for a future build.
When the GPU u bought 6 months ago now costs more than ur entire PC
Sell it then buy an rtx3060 hehehee
@@abhinavrajesh2975 IF it were only that easy.... this 1660ti would magically turn into a 3090..
@@crisnmaryfam7344 its only true for the 3080
Try undervolting the CPU by, like, 100-115mv offset. Should drop the thermals by 5-10 degrees easily.
he updated on his story that the cooler wasnt even making contact with the cpu and switched it for an aio that is a lot cooler now
@@akamadman203 shit the stock cooler would have dropped that by like 20c aio wasnt needed but I support the choice. stock cooler on my wifes pc has never been over 60c in Cod bocw zombies or WZ...
@@crisnmaryfam7344 i would use a stock if it wasnt so ugly but also my cpu would over heat using stock its a i7-9700k
Sat morning coffee with Dawid!!!
Same Here. Me and my wife watched his video while having our coffee this morning. Dawid's new videos are a great way to start a Saturday morning.
Same!
It gets REAL NOISY
**Really quiet and not noisy**
Lol u my bro
You really do deserve more subs ! a LOT of interesting video ideas :D
Thank you! I appreciate that. 😁
@@DawidDoesTechStuff keep doing what youre doing!
@@DawidDoesTechStuff did u leak ur address on this video with amazon when u showed the ram is said the address im not sure if thats urs or just like a address for fan mail and shit
@@kryhxlic2446 Oh that was the post code for my previous address. Whoops. 😁
a bottle of clear nail polish and a black spray rattle can and you can paint the back of the graphics card, use the PCI-E express cover to protect the gold pins or use electrical or masking tape, thermals won't matter to much might have to have a higher fan curve, what I did for my sons build and surprisingly looks great
I built myself a pc at the start of 2021. My mate helped me pick all the parts and it was hard. I had no clue what I was doing. 😂 We’d find a part, then it would go out of stock or something similar so we had to pick another part. It was a nightmare but we got it done. Spent a lot more than I wanted to though.
You should get a custom backplate for that 5700.
I just recently did a bit of scavenging myself. I got computer parts laying around from upgrading other people's computers and upgrading my own. My home theater PC was using a i5 2400 and a R7 250 graphics card. So I scrapped a bunch of parts together and made a system with a FX 8120 and a powercolor R9 380x 4 GB. The motherboard has toslink out built-in, which works great with my home theater receiver, at least until I decide to move to dolby atmos then I'm going to have to use the display port out.
that cooler makes the board look so good!
I love my Noctura NH-L12s cooler. It exhausts directly out the case panel. And the Noctura fans are so quiet.
Idea: overclock the living hell out of the "new" gt 1010
perfect idea
and then add one of those small noctua coolers to give it more theral performance
get dosdude1 to solder super high binned gddr5 to it for extreme record breaking
Lol there is a gt 1010. Why nVidia, why? It must be a dell card.
@@Heliocentric Yeah, probably just for OEMs as there's still no retail ones around.
6:29 - 6:35
That's what she said.
Yes i went there.
The video context oh no
That's pretty much the opposite of what I normally hear!
6:29 That's what she said
Lol not with me
DAWID WAS THERE MEANT TO BE A POSTODE ON THE AMAZON SCREENSHOTS!?!?
Haha!! That was my previous address, so we all good.
@@DawidDoesTechStuff Ah! Are you streaming tonight, or do you need a break after Wednesday😂
lmao tightening a noctua cooler dropped temps considerably. can relate to that. stopped screwing in my NH-D15 when I heard the springs creak because I thought I was overtightening it. didnt know Noctua designed the screws to stop so you cant overtighten. I was getting 93C in AIDA64. Retightened the screws completely and then got 80C max in AIDA64.
Built my PC recently and had to check daily for the 1660 super to go down from near $500. Happened to check Amazon one night and went back down to $240 for a brief moment and instantly bought.
I'm not going to lie, I was kind of hoping this was an ultra-low-budget scrap parts build of older but still solid parts (like, that i5 2500 you have in the opening credits), but this was still a great video. Thanks man!
gotta love that NASCAR'15 music during the benchmark!
niice i recently went with a similar build, love seeing the nr200 start being used, mine is white nr200p, 32gb ram, 3700x, sf600, and placeholder 1050ti
The NR200P is big, I've managed to fit a 4090 in there. For cpu cooling, tower coolers are much better. You set it up to intake from the back, and then the top fans blow all that heat out the top. A 5900x was easy to cool with this setup.
im so glad this guys growing as fast as he is.
The only way a prebuilts can be good
If old school rules still apply, negative airflow works better but gets more dust, positive airflow like that will stay clean but your basically using the Video card as an exhaust fan and that will kill the card some what faster then normal.
I've got an NR200 as well, for fan setup, I did have to add 2 120mm Noctua fans on the bottom as intake. My airflow setup is bottom up now. Amazing improvement, highly suggested.
That music reminded me of the sort of music you'd find on 'other' video streaming sites.
While you were going over the parts.
I use a Noctua L9a to tame a 3400G. Has no problem with it.
As a microATX lover, you owe it to yourself to try a build in the NR400. I keep getting tempted by that case, but still haven't actually bought one yet.
Also Corsair's SF supplies are solid. I should replace my ailing Seasonic Focus Plus Gold with my SF750.
That Noctua cooler on that tiny board looks so clean and nice
You should have gone with a negative pressure set up, btw
I just built my first MITX SFF PC in the Cougar QBX case. I was lucky to find it from Newegg for ~50$ before they were gone again. Keep doing SFF content Dawid, it is so fun! My plan was to have a slightly portable gaming rig that I could stuff my 3 fan 2080 into occasionally.
I Had to buy a prebuilt since gpu out of stocks i arent hopefully there Will be any in 2021 ive seen sites push get in stock in june
Literally bought a Rx 5600 XT yesterday for $500 in Vancouver. And today I watch your video where you "scavenged a Rx 5700" and I almost cried... Lol
This guys is so underrated.
Nice build. You might want to try the NH-U12S as it still fits nicely and will vent out the back and you can then vent the top fans out the top for better case thermals. Just a suggestion.
I'd really prefer the IM01 cases (Sama, Inter-tech etc). Agreed, it is 14 mm deeper and 8 mm taller (let's say half an inch and a third of an inch), but it takes an mATX board, an ATX power supply, and a normal tower cooler (155 mm tall).
Dawid you are by far the best/funniest content creator. You literally make me laugh until I cry sometimes.
Loooking for reasonably priced PC parts is like trying to find a sasquatch, or a yeti, or the loch ness monster
I'd turn the top fans back around, hot air rises so atm there is a thermal death match happening in that case. Nice build tho.
The "Heat" is not in the case long enough to "rise". Sound weird but it's true. You want to blow air in (with minimal filters) verse sucking air out. This eliminates hot spots/pockets. You will be able to run your fans at lower RPM as well as prevent dust from creeping up in through every unobstructed crevice.
Positive pressure FTW
I would say adding some fans on the bottom as intake would likely help with thermals all around.
I have almost the exact same setup with the same cooler put 2 fans at the bottom sucking up air then put 2 at the top to exhaust you wont be upset and it wont be a hell fire breathing dragon
Generally speaking for thermals in the NR200P you want to exhaust out the top with the fans.
Heat rises, the top fans should draw air from the bottom over all components and blow UP-!! Might've helped your struggling thermals, you can do better on the cpu cooler too. Just my opinion. Nice case and a great result either way.
I’m building a PC for my son. But I already have my “old” Pulse 5600XT and Ryzen 3600x to use for it so the rest of the parts weren’t too hard to find. I also went with a white case... a Montech X1.
I got a beastly RX 480/8GB with triple fans , huge heatsink , dual BIOS Never passes 63C under full load for $100 USD. A pandemic-prices-win in my book.
For the record, I think you are the funniest hardware reviewer on the Internet. And your content doesn't suck. And your sidekick is cute.
I have the tempered glass version of the NR200P , you can fit a Scythe Mugen 5 ARGB ( not the plus version) CPU Cooler, it should perform much better than the low profile Noctua that you have. I can close the side panel just barely, you should consider that cooler to keep the noise down.
yeaaa i'd definitely flip those top fans though. I think exhaust will help that CPU a lot more
I believe you could add a fan to the bracket on the side that could blow fresh air right into the cpu area, that might help. Love that case!
as hot air is going up, i would consider fliping these top fans. air would come from the back and the mesh pannel :)
if you need parts like ram or ssd get them now i just got a 1tb silicon power gen 4 m.2 for 147.00 also holy crap i love silicon power they make real affordable m.2 with dram cash for a reasonable price i feel like more people should be doing videos on there m.2s but there's like none i see it for the adata which is a good one to but the gen 4 i just got from them is a little beast
Top intake no no no you need to install intake fans to the bottom or to the side. The top fans are ment to be the exhaust in that case.
And as we know heat rises anyways. I have an 9700k in that case and im using 2 side intake fans and 2 top exhaust fans and it works nicely.
You should try putting the side fan bracket as intakes for the top down cooler and the top two as exhaust, I seen posts that ppl are getting better temps with it.
A Cronenberg PC??!?
😂
got the same cooler for am4 on a ryzen 7 2700 65watt chip in a lian li q58 air cooled..16gigs...got a gigabyte rtx 2060 with it all...great temps and quiet...
Funny how a week back I just built in that exact case with some pre-built parts from a lenovo PC I took apart! Too bad that my cable management in that thing is completely attrocious in comparison.. But I will say that was my first time in an mini ITX case and using a full sized GPU as well. Maybe it partially didn't help that all the front panel connecters were on the right side of the motherboard I used, which didn't help since that was a tiny fit at that point.
Wow Dawid first hickie he’s lost his innocence.
That turned out pretty nicely. I don't see a lot of room for much else in there, but I wonder if a 240 AIO would mount up top?
It does. It just depends on your mobos vrms and ram height.
I was looking at that exact case this morning - I kind of like it. Great looking rig - I'd use it :)
Actually, considering the coloring of MB case, the red PCB of the GPU fits perfectly!!
I adore how well that cooler fits.
I ended up buying a prebuilt because I wanted to build but then its to expensive and difficult to get the parts right now. But my case is nice and hopefully a few years down the road I can put a new 40- series card with DDR 5 ram and the next gen CPUs in it. The build job on the computer was good too,so it will last.
Just moved my build into this case. Love this case!
"It's got little kitty cat ears" gotta love the things noticed by the fairer sex.
Haha
Thermaltake core v1 is a better case, it's a bit bigger but you can fit a bigger cpu cooler and it's got a 200mm intake fan on the front and plenty of room for exhaust fans.
Negative pressure might work better for the cpu temps you could try a comparison just reversing the fans
I love this case. I have this exact one. I put a full sized internal Blu-ray player in mine. You should gone with the NH-C14S cooler. I run a i7 10700 even with handbrake at 100% cpu utilization, temps just get to 70 C. I have PL1 maxed (asrock H470 mobo) at 125 W
Same here. I have a 10600k and it maxes out at 85 watts under 100% on all 12 threads with handbrake and a Noctura NH-L12s. Such a great CPU and cooler combo. I don't even run the fan until 50°C
I just upgraded from a Pentium G3220 to a Haswell refresh i5 4690 : ) I'm happy.
I think the top fans as intake are a mistake. You should put one on the bottom and intake, and one on top as exhaust. Or just both as exhaust on the top. They will pull fresh air in through the side panel.
I love the look of that noctua cooler. I want to build a 3400g tiny pc with it but I don’t have the case, psu, ram, cpu, cooler, motherboard, or any spare ssds. So I have a bit of work to do
Well at least you have sata cables ...that's a start. 😆
everything is this pleases my OCD SOOOO much. im just choosing to ignore that red pcb, if i tell my brain its not there then it is perfect! totemo kawaii desu
The pc when it's as loud as it can be u say is like my ps4 when I'm watching UA-cam witch is the quietest it gets 🤣🤣
Sick vid never seen someone make a Frankenstein pc from prebuilts before
Weird. It's pretty common. Especially with older laptops.
Great video as always. :) It's always nice to get something useful out of those prebuilds. About that CPU cooler though... I got exact same cooler (AM4 variant NH-l9a) on my R5 3600 and temps are around 65-75C in games. It can't handle any overclocking tho, like not even little bit. :P I hope Anna is happy with her new build.
Hey it seems I finally found someone with the same CPU+Cooler Setup :D
How are your temperatures in idle/under normal "office" load?
I am asking because when gaming, my temps are around 80° and even go up to 92° at max which isn't great imo :|
@@chriss7005 Hey :) My idle temps were with 55-60C range with a proper case with a good airflow. Check if your PC is getting enough cool air by opening the case. If the temps are still hot, then it's not an airflow issue. You can always try to re-apply the paste and check if the cooler has proper contact (enough pressure). I did replace my cooler with a better one because I wasn't happy with the noise it was making in full speed (also I couldn't overclock).
My 3070 came yesterday but i still have to update the bios on my x570 cus i have a 5600x. Once i get it up and running it will be awesome
Man at this point I'll settle for a 5700 XT just to finish my build.
ok
@@thetruestar6348 id been trying for months to get the 3070, and tbh the wait sucks. But, bestbuy is dropping soon i think so u might wanna try that if ur in the market for a 30 series
@@user-gy6fw3tz4z I'll probably be getting my graphics card next month hopefully. At the very least I have a Micro Center near me so I can always check their stock and go in store.
@@thetruestar6348 I hope you get it soon!
u can use atx PSU with 3D bracket on coolermaster NR200 web. and u can use Asrock H410M or another M ATX with 22.6cm height mobo.
I like that SSD too. That's the SSD I ran cyberpunk off of lol
Wow this is a pretty great 1080p gaming machine.
Oh I built my daughters a system using this case. I scavenged the stock AMD cooler from my Ryzen 9 for a Ryzen 5 3600X and an old 1070 from a Dell. So easy to build in.
This guy still has his innocence after being married. Says something about ebay
11:08 "Like.. it gets really noisy"
..silence
That threw me off
That stock thermal paste application was actually pretty sexy.
Gotta love how the first thing she says about the way the case looks is that the fan mounts look like cat ears.
I was thinking you’d take the shot to score some cute points with the significant other by using the Waifu vid card. Missed opportunity there!
Lol wonder if she likes anime
Really nice case. Might just have to get one for my next build!
I prefer vertical CPU coolers. Because when GPU gets hot, it's backplate radiates heat and CPU cooler just sucks it in. But when you have vertical cooler (fan aligned to pull air through the case front to back) it barely gets that GPU heat. At least this configuration fixed my CPU temps while using a hot GPU.
Also: so awesome to have tech savvy wifey/girlfriend. I wasn't so lucky in this matter. My woman cares only about filling up her 64 gigs of space on her iPhone with photos.
6:28 that's what she said!