Wish the RGBW supported something like the Feniex QSM signaling so I could use a legit controller. Bluetooth from my phone isn’t an option, it’s just a gimmick. We need a legit way to change colors on fly. Like trigger white for reverse or red bright for brake or yellow flash for turn. All with same light flush mounted in bumper. Just like how the Feniex Quad QSM would be used on an emergency vehicle.
If Bluetooth isn't an option for you, we do have another solution for you! We do offer an actual controller you can use as well! We also do sell the lights with the wires exposed as an option to wire them yourself for a custom application! www.diodedynamics.com/rgbw-24-key-m8-rf-controller.html
@@Nackss They include splitters to allow you to wire up 8 for one kit. However, you can wire up to 16 rock lights using one controller by using splitters!
Will these get hot enough to thaw ice and snow? Also, can you demonstrate how strong the magnets are for us visual folks? (Mainly because I don't want to drill into the frame).
Yes, absolutely! These will melt snow right off! Head over to our Instagram with this link at 3:40 for an example of our magnet mount! instagram.com/p/CkeUJ5qBxP8/
So I have a install question related specifically to the RGBW option. Considering the RGBW, however I would want to run them directly to my Jeep factory AUX switches. 1- Considering I wouldn't need to use fully use the supplied harness, which wires/color would I use and to where? 2- Considering it being RGBW, would I have to run them to/use two separate AUX switches? I have two open switches I'm not using but would prefer to keep one open. Already using two for DD SS3 pods which I have wired separately to accommodate the backlight feature.
With the supplied harness for the RGBW, it should only be positive/negative, so from there, you can splice into your aux switch, and ground the harness in the engine bay! This will power the Bluetooth module needed to run the RGBW Rock Lights, which also powers the Rock Lights!
Is the Bluetooth app available for both the white only and RGBW modes? Also, does the Bluetooth app have the ability to control each light individually or by can you set up a “zone” that you can assign lights to and control the “zones” individually? It’ll be a cool feature to be able to turn on/off select lights and/or put some lights on specific colors/modes.
Hey there! Please go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you with that.
DD always giving what the customer wants and more
We try our best! 💪💪😎
Killin' it, ya'll! Need some for the 4Runner ASAP
These are universal!! 🙌🙌
Can't wait till they ship!
Yess!
Absolutely killing it
Thank you for the support!
Wish the RGBW supported something like the Feniex QSM signaling so I could use a legit controller. Bluetooth from my phone isn’t an option, it’s just a gimmick. We need a legit way to change colors on fly. Like trigger white for reverse or red bright for brake or yellow flash for turn. All with same light flush mounted in bumper. Just like how the Feniex Quad QSM would be used on an emergency vehicle.
If Bluetooth isn't an option for you, we do have another solution for you! We do offer an actual controller you can use as well! We also do sell the lights with the wires exposed as an option to wire them yourself for a custom application!
www.diodedynamics.com/rgbw-24-key-m8-rf-controller.html
How many lights can the controller support? Seems like only 4 on the website.
@@Nackss They include splitters to allow you to wire up 8 for one kit. However, you can wire up to 16 rock lights using one controller by using splitters!
Will these get hot enough to thaw ice and snow? Also, can you demonstrate how strong the magnets are for us visual folks? (Mainly because I don't want to drill into the frame).
Yes, absolutely! These will melt snow right off! Head over to our Instagram with this link at 3:40 for an example of our magnet mount!
instagram.com/p/CkeUJ5qBxP8/
So I have a install question related specifically to the RGBW option. Considering the RGBW, however I would want to run them directly to my Jeep factory AUX switches. 1- Considering I wouldn't need to use fully use the supplied harness, which wires/color would I use and to where? 2- Considering it being RGBW, would I have to run them to/use two separate AUX switches? I have two open switches I'm not using but would prefer to keep one open. Already using two for DD SS3 pods which I have wired separately to accommodate the backlight feature.
With the supplied harness for the RGBW, it should only be positive/negative, so from there, you can splice into your aux switch, and ground the harness in the engine bay! This will power the Bluetooth module needed to run the RGBW Rock Lights, which also powers the Rock Lights!
Is the Bluetooth app available for both the white only and RGBW modes? Also, does the Bluetooth app have the ability to control each light individually or by can you set up a “zone” that you can assign lights to and control the “zones” individually?
It’ll be a cool feature to be able to turn on/off select lights and/or put some lights on specific colors/modes.
Hey there!
Please go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you with that.
Are the RGBW STILL OUT PUT TO 1000 lumens
We don't have exact numbers yet, however, the RGBW puts out around 500-600 lumens per light! The single color Rock lights put out 1000 stable lumens!
Do these support dimming through something like my switch pro 9100 instead of having to use another output to use the lower brightness?
They are dimmable, however you'll have to get the wire lead version of the Rock Lights and custom wire it to fit your needs!