This would be a good one to go a little further with than usual. She's a runner and pretty damn solid for the age. Get a fuel tank, tires and brakes, and see how she does on the old back roads. I have a '56 3600 3/4 ton. Sat about as long as this truck and had about the same amount of rats nest. Fortunately she turned out really solid. Driver's floor pan is not rusted through, and it's not even pitted. Well underway on a full original restoration.
@@Joesmusclecargarage have you seen some of his other videos? It’s certainly impressive when it’s been sitting for over 60 years with a locked up engine
@@Finlan2005 Yes I’ve seen his videos. But almost anything can be broken free one way or another. It’s not “impressive”, unless you lack mechanical knowledge and ability.
When the front door opened up I was hoping you'd deal with the interior on camera... Let's just say you did NOT disappoint!!! Love all your crazy project and common sense (?) approach!
Very cool!! Say, I have a question, where do you come across these vehicles for your videos, and, what do you do with them after?? Thanks... I really enjoy your videos, except for one thing, its hard to watch TV, your videos and work on my hot rod all at the same time!
That's a very solid Kool Chevy. I like to see you bring it around and do something with it 👍 I'd also like to see more on the Diamond T. Great video as always and keep up the good work 👍✌️🇺🇲
Absolutely bloody love this channel. As a bloke from across the pond, I’m amazed that these old Chevy and Ford trucks keep getting pulled out of the woods and barns, even just within small areas of the states. JMS doing Gods work pulling them out and getting them back on the road. How much would an oily rag like this be worth, do you reckon?
In my area trucks like this pup up for sale for anywhere between $500 to $5000 depending on how functional it is. Most of them end up being yard art outside of businesses since a billboard can be added to the back pretty easily. Pickup trucks are more expensive though since more people want to drive and restore those.
I just fell in love with the sound of the engine, it's unbelievable that the truck is still running 😮👍Thank you for sharing this beautiful moment with us.🤗
I love jobmaster 261 engine. Here in Brazil we use it until 1979 im the brazilian C10.. i have one chevy 3100 1963 that belonged to my dead father. He was the first owner.. i keep it until now in my garage...
It’s just amazing that these vehicles you can fire up where they are. I’m stunned after all these years you can start them where they are. I always wanted one of these old American trucks especially a Chevy. Great video thanks for sharing
Love your videos my buddy and I use to buy heaps of shit old vehicles when we were younger and get em running and driving just to prove we could. We always talk about doing this but we just don't have the time anymore. We watch your videos all the time keep up the great work theres something magical about an old vehicle running after so long
HI MR.JENNINGS,, MY SON MAX AND I LOVE YOUR VIDEOS BUT THERE A YEAR OLD ,, BUT MAX 7 YR.S OLD IS SO GLAD YOUR BACK !!!! GREAT TRUCK BUT RATTY YA!! INSIDE.. ANOTHER GREAT VIDO!!! WE LIKE THAT OLD GRILL IT WILL CLEAN UP WELL OR PAINT IT,,.. THANKS ..
Dude's got a line on some will it run gems other big channels would kill for at this point. xD Not to mention a much wider berth of content with that amazing skill to save and make absolutely anything run.
Sassy Grass AAR Cuba? That was an awesome surprise on this video. Can’t wait to see the progress on that car! Love your content. Simple. One guy, one camera. Keep it up and watch your subscriber numbers grow!
Hey Mr. Jennings, I bought a 1957 that came off an Air Base in California. It didn't have a speck of rust on it, but it had 10 coats of paint. I got it from some guy who finished his stint in the AF and he bought it from the base, to drive it home instead of buy a plane ticket. It had a 265 V8 with 3 on the tree. I customized it extensively by removing all the paint and putting Burgundy on it. Put a couple bucket seats in it, carpeted the floor and real wood paneling on the doors. White wagon wheels w/ fat off road tires and a white tonneau held on with those push on grommets. The Sec of State wanted it weighed and it came in at 3500Lbs. Eventually the motor came out and I put a 440 w/ Torqueflite from a 1968 Dodge Charger in it. The rear axle pinion gear wore out, so it got a Chrysler 8 3/4" with a 3.55 sure grip. I'll tell you what: At 3500 Lbs it was quick! And you can ask my brother-in-law how fast it was, it scared him. I used to cut traffic with it running between towns where I was working. I eventually gave it away to a cousin. It was a really cool truck! Thanks for bringing back the memories. You will have something special if you want to, I sure did. ben/ michigan
Favourite restorer. Been around from the start, love all of the videos. I'd love to see if a longer vid would get the epic views you deserve but you've already knocked it out the park! Much appreciated
Yes, sir true American treasure! 🦅 🇺🇸 No begging for Pateron money. No BS sponsorship peddling. Just straight onto the video showing us what you do best and with your cool accent. Respect!! 🫡 P.S. turbo the BMW! 😊
Thank you 🙏 for sharing ☝️I had 1959 GMC 100 with 4 heads lights extremely powerful & comfortable ❤👍yes you are great 👍 know all your great 👍 car 👏👏👏👋☮️
Man great job getting that classic beauty started! I love them old trucks! By the way good luck finding the matching numbers engine for that AAR Cuda! Definitely looking forward to see what you have in store for that classic!👌😎👍
She barely even smokes. Minty. In all seriousness she runs like a top, and just that little pressure washing uncovered that red. I can only imagine how beautiful that ol girl was in her day.
Hi, JMS. I have to ask, what do you do with all these old vehicles you get running? Full restorations? Sell them? Keep them around? I mean at this point there's probably about 70 you've got running, so I'm legitimately Curious. Thanks
Jennings motor sports awesome videos friend 1955 Chevrolet old truck needs everything battery clean inside the cab engine good condition tires are good bless you happy memorial day weekend
This guy is the type of guy that will tell you great stories about cars and his life. Love your content. Also on the quality issues you have on your videos on premiere. Have you been recording them in a lower quality format or exporting them in a lower format ? If so tried changing your camera settings to record at the highest quality setting it has. And on premier export it at a high enough resolution that UA-cam won’t compress it too much
Omg, that engine cranking over was absolute music to my ears. I used to have a couple 58’s and a 59, that old 235 was a tough old engine. Valves didn’t like unleaded though. I’d give anything to have another un violated one that still has the push button start next to the gas pedal where it is supposed to be. I might be getting my dads 58 Chevy carryall but it has been modified to take a mpfi small block. Anyways take care of that beautiful truck
This would be a good one to go a little further with than usual. She's a runner and pretty damn solid for the age. Get a fuel tank, tires and brakes, and see how she does on the old back roads. I have a '56 3600 3/4 ton. Sat about as long as this truck and had about the same amount of rats nest. Fortunately she turned out really solid. Driver's floor pan is not rusted through, and it's not even pitted. Well underway on a full original restoration.
This guy can make literally anything run
That damn guy run my gf and take her from me
@@Papka_Dwarf good she was for the streets anyway 😂😂😂
You act like it’s rocket science.
@@Joesmusclecargarage have you seen some of his other videos? It’s certainly impressive when it’s been sitting for over 60 years with a locked up engine
@@Finlan2005 Yes I’ve seen his videos. But almost anything can be broken free one way or another. It’s not “impressive”, unless you lack mechanical knowledge and ability.
This is one of the last great UA-cam channels. No horseshit, no rubbish, just great content.
I love watching this car/ truck guy bring these old engines back to life
Keep doing what you do , we all love it
Found this channel last year by chance and have enjoyed your content ever since.
This has to be one of the most absorbing channels on UA-cam. To think I've had enough fun getting old 2-strokes to work in the past!
I have had a fair bit of fun with old 2 strokes too... But they said "Detroit" on the valve cover and weigh more than a car! 😂
When the front door opened up I was hoping you'd deal with the interior on camera...
Let's just say you did NOT disappoint!!!
Love all your crazy project and common sense (?) approach!
This is why I can’t have any yard decorations with an engine lol I’d be trying to get them running.
Great video
Will Pilkington Just love to see the challenges you put yourself through. Really enjoy your effort and love to see these old vehicles run.
Very cool!! Say, I have a question, where do you come across these vehicles for your videos, and, what do you do with them after?? Thanks... I really enjoy your videos, except for one thing, its hard to watch TV, your videos and work on my hot rod all at the same time!
That's a very solid Kool Chevy. I like to see you bring it around and do something with it 👍 I'd also like to see more on the Diamond T. Great video as always and keep up the good work 👍✌️🇺🇲
Cool is spelt with a C not a K
I like how you keep your videos simple and straight to the task. I get what's in the title. No other stuff. This is how it should be.
Absolutely bloody love this channel. As a bloke from across the pond, I’m amazed that these old Chevy and Ford trucks keep getting pulled out of the woods and barns, even just within small areas of the states. JMS doing Gods work pulling them out and getting them back on the road. How much would an oily rag like this be worth, do you reckon?
In my area trucks like this pup up for sale for anywhere between $500 to $5000 depending on how functional it is. Most of them end up being yard art outside of businesses since a billboard can be added to the back pretty easily. Pickup trucks are more expensive though since more people want to drive and restore those.
@@ThinginatorI personally prefer the panel van version, very cool looking thing, I love the pickups too but the van is special. Would love one.
I just fell in love with the sound of the engine, it's unbelievable that the truck is still running 😮👍Thank you for sharing this beautiful moment with us.🤗
I love jobmaster 261 engine. Here in Brazil we use it until 1979 im the brazilian C10.. i have one chevy 3100 1963 that belonged to my dead father. He was the first owner.. i keep it until now in my garage...
It’s just amazing that these vehicles you can fire up where they are. I’m stunned after all these years you can start them where they are. I always wanted one of these old American trucks especially a Chevy. Great video thanks for sharing
I have to say that this young man can get anything running. Is so enjoyable to watch and listen to him explain what he is doing.
Love your videos my buddy and I use to buy heaps of shit old vehicles when we were younger and get em running and driving just to prove we could. We always talk about doing this but we just don't have the time anymore. We watch your videos all the time keep up the great work theres something magical about an old vehicle running after so long
Good morning from Cape Cod ⛵ beautiful 55, you got her running and driving, congrats on another job well done 👍✌️🇺🇲
Howdyyawl from the land down under. I used to have an AT4 Dodge With a 245 slant 6 in it. Powerful unit. 😊
Very nice truck.. lots of uses for it. Good job saving it.
Dang, it looks just like my 55 2nd Series. I looked out in the barn to make certain nobody had stolen it!
You are the vehicle whisperer. Such a cool truck.
HI MR.JENNINGS,, MY SON MAX AND I LOVE YOUR VIDEOS BUT THERE A YEAR OLD ,, BUT MAX 7 YR.S OLD IS SO GLAD YOUR BACK !!!! GREAT TRUCK BUT RATTY YA!! INSIDE.. ANOTHER GREAT VIDO!!! WE LIKE THAT OLD GRILL IT WILL CLEAN UP WELL OR PAINT IT,,.. THANKS ..
Welcome back brother I miss your updates
Dude's got a line on some will it run gems other big channels would kill for at this point. xD
Not to mention a much wider berth of content with that amazing skill to save and make absolutely anything run.
How the 'Cuda coming along? I'm looking forward to seeing another video on it. It's been a while!
I really like your channel great mechanic bringing these vintage vehicles back to life 😊🤔😎
Sassy Grass AAR Cuba? That was an awesome surprise on this video. Can’t wait to see the progress on that car! Love your content. Simple. One guy, one camera. Keep it up and watch your subscriber numbers grow!
Awesome job! 👍 That would definitely make a cool truck to put a bed on and haul with!
I like how confident he always is, and he has the right to be, he always makes it work
Well done Sir. Keep up your great work. Bests, Fletch, NSW Australia 👍
Hey Mr. Jennings, I bought a 1957 that came off an Air Base in California. It didn't have a speck of rust on it, but it had 10 coats of paint. I got it from some guy who finished his stint in the AF and he bought it from the base, to drive it home instead of buy a plane ticket. It had a 265 V8 with 3 on the tree. I customized it extensively by removing all the paint and putting Burgundy on it. Put a couple bucket seats in it, carpeted the floor and real wood paneling on the doors. White wagon wheels w/ fat off road tires and a white tonneau held on with those push on grommets. The Sec of State wanted it weighed and it came in at 3500Lbs. Eventually the motor came out and I put a 440 w/ Torqueflite from a 1968 Dodge Charger in it. The rear axle pinion gear wore out, so it got a Chrysler 8 3/4" with a 3.55 sure grip. I'll tell you what: At 3500 Lbs it was quick! And you can ask my brother-in-law how fast it was, it scared him. I used to cut traffic with it running between towns where I was working. I eventually gave it away to a cousin. It was a really cool truck! Thanks for bringing back the memories. You will have something special if you want to, I sure did. ben/ michigan
Favourite restorer. Been around from the start, love all of the videos.
I'd love to see if a longer vid would get the epic views you deserve but you've already knocked it out the park!
Much appreciated
"Restorer"? 🤣
This use to be my hobby before a back injury...at least I can watch it today..👍. I could actually smell it when first fired...lol. Nose memory
That's a pretty good find! Looks more solid than some I see on the road!
Your skills are second nature to you. To us, they are amazing. A huge dose of respect. Stay well.
Im absolutely jealous this is a really cool truck 👌
Awesome seeing that old truck come back to life. Great Job getting that old motor running again!!!
Alway an optimistic attitude no matter how bad off the situation.. awesome!!
Yes, sir true American treasure! 🦅 🇺🇸
No begging for Pateron money. No BS sponsorship peddling.
Just straight onto the video showing us what you do best and with your cool accent.
Respect!! 🫡
P.S. turbo the BMW! 😊
Amazing channel! You should restore this beauty back on her feet! I cheered when she started moving!
Thank you 🙏 for sharing ☝️I had 1959 GMC 100 with 4 heads lights extremely powerful & comfortable ❤👍yes you are great 👍 know all your great 👍 car 👏👏👏👋☮️
Man great job getting that classic beauty started! I love them old trucks! By the way good luck finding the matching numbers engine for that AAR Cuda! Definitely looking forward to see what you have in store for that classic!👌😎👍
I love watching this guy make these old trucks go. I got myself a '86 C10 longbed that i am giving a try myself.
As soon as you replaced that starter, zoom....I like to see you work on nice ones like this, too. Thanks!
She barely even smokes. Minty. In all seriousness she runs like a top, and just that little pressure washing uncovered that red. I can only imagine how beautiful that ol girl was in her day.
Hi, JMS. I have to ask, what do you do with all these old vehicles you get running? Full restorations? Sell them? Keep them around? I mean at this point there's probably about 70 you've got running, so I'm legitimately Curious. Thanks
Ive always wondered that too. I wonder if he just goes to peoples houses and asks them if he can try to get whatever they have running lol.
@@rm25088 Also, how do you even properly STORE something like this?
@@qwertykeyboard5901 no clue lol
I enjoyed it. Looking forward for more
Man you need to make more videos I like them old rides you pull out the woods and get them running again
TRUE WORDS ,,YES THANKS!!
Good job. Abandoned truck. First starting. Nice. Engine
I think this truck really deserves some attention. A budget respray, some cleaning, and it should come out better than new!
Another great restoration story! I would like to see the details on removing, rebuilding and reinstalling the starter. Nice job
This one was neat. You could actually hear as each one of the cylinders came back to life. It gradually smoothed out.
Gorgeous truck, wish i had that up here in Canada! Ours all rotted away...
Always enjoyable watching your video's !
I wish I could find one of those that I could afford, I love those, nice work and great save
Jennings motor sports awesome videos friend 1955 Chevrolet old truck needs everything battery clean inside the cab engine good condition tires are good bless you happy memorial day weekend
Great video, great job Mr. Jennings!!!
This guy is the type of guy that will tell you great stories about cars and his life. Love your content. Also on the quality issues you have on your videos on premiere. Have you been recording them in a lower quality format or exporting them in a lower format ? If so tried changing your camera settings to record at the highest quality setting it has. And on premier export it at a high enough resolution that UA-cam won’t compress it too much
Bravo! I rebuild very old radios, vacuum tube technology. I know the feeling when it runs!. The radio can be rebuilt!
Out of all “will it runs” this dude, the most entertaining and hilarious one to watch.. love it😂🫣🤣
You sir are a wizard.
God bless America 🇺🇸
OUTSTANDING!!! great work sir!
i absolutely love watching your videos. Thanks for making them for our entertainment!!!
Ah she's a beauty!!!
Nice work!
That's got to be alot of fun! Throw a few back while you're working on a historical vehicle
I can’t believe that running board is that good!
It fired up surprisingly well! Looking forward to seeing more of the other Cuda and the old truck you are putting the diesel engine in.
Very cool to see that run again, nice work
I love those old straight sizes! That was Chevy's universal engine for decades!
This dude just gets anything running and makes it look easy
Very cool 😎 👌 👍 thanks for sharing!!!
Omg, that engine cranking over was absolute music to my ears. I used to have a couple 58’s and a 59, that old 235 was a tough old engine. Valves didn’t like unleaded though. I’d give anything to have another un violated one that still has the push button start next to the gas pedal where it is supposed to be. I might be getting my dads 58 Chevy carryall but it has been modified to take a mpfi small block. Anyways take care of that beautiful truck
Pressure washing the interior was so satisfying, love seeing that too haha
I was surprised to see it run with not too much effort, nice work.
I swear this guy has the magic touch when it comes fixing up these neglected old vehicles
Sweet 55 👍 reminds me of my 55 it sat for years was locked up but runs again just wish the body was in better shape.
Sometimes it's hard to believe that you can get something that's been locked up to start running. Good job
Great channel encourages me to do stuff with my collection
Another Awesome video. Based on the grill, this looks like a 57.
It's a 55. I have one just like it, except mine doesn't have an engine or transmission. It's just a body.
Now that is a cool old rig. Needs to be on the road again
Love your content. Just a good dude working on vehicles.
Great Video!
This VIN was cool. The quality is fine, in 360 you can distinguish rust from healthy sheet metal.
Really love these videos 🤘
Another beautiful rig!
What a cool truck. I'd shine on the body that's left and put a bed of some kind on it. Even a modern day dually bed.
So interesting! This engine sounds like a diesel engine, but not quite a six cylinder, maybe because it's missfiring. Cool engine sound
You can make a very good wrecker with that truck. Very cool
Well done as always :)
Incredibly good, well done Mr.
I have just figured why I like these clips Its not your skill with old motors Its your accent and presentation really great 🇦🇺🇦🇺🇦🇺🇦🇺🇦🇺😃😃
You re amazing..you ve just any vintage locked engine started it..*best like*
Love watching this channel
Wooo! I can't wait to find out will it run!
Gostei muito. São verdadeiros artistas
Using both hands is easier for you. ,try a head attachment for cam.good save well done .
ANOTHER AAR?!?! so cool
Good job mate , that’s a great old truck very nice, a real keeper for sure 🤙🤙🤙🤙🤙