The First Tool modify to CNC
Вставка
- Опубліковано 27 вер 2024
- #CNC#Lathe#Awesome_CNC_Freek
I modified it into a CNC lathe using Linuxcnc.
Since it can use the C-axis, it can also process screws.
???????????????????????????????????????????????
Thanks for watching this video.
Give you a PRESENT that's just right for you.There's also 3D models.
A little funny , Awesome Fantasy Survey
awrjb88ih24.ty...
???????????????????????????????????????????????
![[UA] Eternal Fire проти NAVI | EPL Season 20 Malta](http://i.ytimg.com/vi/chvlsDygrZM/mqdefault.jpg)
Excellent mods! I would suggest getting a brush to remove the spoil, rather than using your hand, as the shaving has the potential to get caught in the chuck, and it would cut you to the bone, taking most of the flesh from your fingers, within a millisecond. Or, use compressed air to blow it out of the way. Safety first!
Thank you for your comment and advice.
I liked seeing that such small motors can be used to make such large forces using reducers.
Really really good you know you’re stuff. The music did me in so I turned my volume off. Nice good 👍💪
Why music ? Why not just the tool and metal sound ?
To use a stepper motor for thread cutting is a great idea. It gives big torque at low rpm. Also it does not require a spindle position sensor then. You should try if it is pissible in your software to advance the thread cutting tool not straight, but under 29 degree. Then it makes chips just on the front cutting edge. This reduces cutting force and torque.
It is possible.
I will try it as needed in the future.
nice, you must like the mini machinea, i personaly wood not give them the money they wont for that little lath the smalist lath i have is the 10 x 14 and i got it for 100.00 but yes the speed controller was burnt and and all the plastic gears where tore up but for 80.00 i got all metal gears including all change gear for the speed controller i put something way better the that 200.00 cheap speed controller, mine is off a scooter 24v and speed controller is way more durable then the stock board that allway burns out.
I want to convert my P.O.S. Chinese mini Lathe to CNC, think it would be worth it
Amazing work. You need more visibility on youtube. If you can, mine is only a suggestion, show more of the process, remove the audio and leave the beautiful sound of cnc machining when the video is real time. It will be fantastic if you make a "shopping list" (like a simple excel) for the 5 axis machine and the lathe whit the upgrades that you made. Great job.
Thank you for your advice.
Regarding mechanical sounds, some people have commented that I want to stop the music and listen to the mechanical sounds, so I will do so from the next time.
I would like to think about the parts list in the future.
Nice video,
Next time let's hear the tooling cutting
Instead of the Chatter
Eso tiene la misma precisión que una zapatilla.
This lathe is not expected to provide high-precision machining.
Super 👌
U can sell the project steps and stl files as well too many people are interested
Can process the 26mm diameter of silinder?
開いた口が塞がらない！
今作ってるCNC旋盤ができれば、もっと面白くなるでしょう。
@@a-cnc-f 超楽しみ！作る情報もあれば最高！
これです。
ua-cam.com/video/3SpZ-lsFfKY/v-deo.html
I could not understand the name linuxcnc. Can it controlled by computer
LinuxCNC (formerly Enhanced Machine Controller or EMC2) is a free, open-source Linux software system that implements numerical control capability using general purpose computers to control CNC machines. Designed by various volunteer developers at linuxcnc.org, it is typically bundled as an ISO file with a modified version of 32-bit Ubuntu Linux which provides the required real-time kernel.
Amazing results! I have the barebones lathe you're modifying in the video and would like to know which other cutting 'blades' you're using? Were they hand made/ ground to shape yourself, or is there somewhere we can purchase them. Mine only came with the one (square-ended piece of hardened stock).
I'm glad you enjoyed it.
The cutting tool used in this video is HSS.
I made it myself.
改造部品をキット化して販売して欲しい
販売は、色々大変なので考えてないです。すみません
What electronics are u using?
I used Machinekit for this one.
Selling the kit for conversion by chance?
I have no plans to sell that.
What a funny cnczation. I have a BBB somewhere, can you share the pinout connections or some type of electronic wiring diagram please? Thx.
I haven't been using beaglebone lately, but I may publish a video on another site soon.
awesome-solution-workshop.teachable.com/p/how-to-modify-a-general-purpose-lathe-to-become-a-cnc-lathe
@@a-cnc-f The link is very interesting, I'll take a closer look at it ☺️ Do you use some kind of cape or do the connections go directly to the BBB?
can you sell that and sent to Mexico?
Thanks for your interest.
But I can't sell it.
awesome build, what cnc software are you using to run the lathe?
I prefer Linuxcnc, but I think the easiest is Grbl.
Waouh ...c est impressionnant... J aimerais bien faire ça sur le mien ...
Are you selling those kits?
No I am not selling it.
Should you please have PDF and STL for your editing? I would also like to make a transfer there. but I do not know how
Details and 3D model
awesome-solution-workshop.teachable.com/p/how-to-modify-a-general-purpose-lathe-to-become-a-cnc-lathe
setup this with fusion360 and make video about it
Thank you for comment.
so far satisfied with special g chord i made.
The reason is that it is faster to write the g code directly without using CAM if it is a simple process.
In the future, I will use fusion360 for complicated processing.
Spare us the music, please.
how do you calibrate stepper step in a cnc ?
what do you mean?
you mean is How do I check the actual movement amount and the movement amount on the program?
If so, it can be confirmed by measuring the actual amount of movement with the dial cage.
@@a-cnc-f i will talk in 3d printer language .
#1 how would you calibrate E step of the stepper motor ?
#2 how do you make the system know where the tool is
#3 is it a system you need to set where 0 is?
3d printer language = G code, M code
Beaglebone = one board PC
machinekit (linuxcnc) = OS that can be cnc (Computerized Numerical Control)
This machine works with machinekit (linuxcnc) installed on beglebone. The stepping motor is set in the INI file in it.
An ordinary CNC machine has an origin switch, which determines the origin of the machine. This machine does not have an origin switch, so I can set the origin as you like.
Hi, loved the video. Just wanted to ask a question. Is that the stock motor you are using, and if so what did you do for make the speed controllable? Just that i have this lathe and wanting to do something like that. thanks!
Thank you for your comment
I'm using a PWM motor speedcontroller
@@a-cnc-f thanks! where can this be can brought from?
@@jackturner5363 This is it.
www.lazada.sg/products/ccm5nj-dc-brush-pwm-motor-speed-controller-switch-regulator-12v24v36v60v-40on-i6302977-s7931139.html?spm=a2o42.searchlist.list.7.5d0e43ca76WTMe&search=1
@@a-cnc-f thank you very much
Kann ich das kaufen?
Not for sale.
I understand 🤣wouldn't sell it either... well worth a try 😝
the problem with all the Chinese machines is no one has a proper fittings gib i finely figured out y they go out of adjustment they put in gibs they have on the shelf instead of making a proper gib.
Какое душное видео, а про качество я молчу
WoWwww...!! Super-Duper -Mega-Pro👌 and of course, I automatically subscribe immediately
Best une femme
For someone who already has a 3D printer and a CNC milling machine, it is no problem to build something like this, if you don't have it you can get the Unimat1 ML which is already available with CNC machines.
Für jemanden der schon einen 3D-Drucker hat und auch ein CNC-Fräte ist das kein Problem so etwas zu bauen, wer es nicht hat kann sich die Unimat1 ML holen de es auch schon mit CNC-Maschinen gibt.
Für jemanden der schon einen 3D-Drucker hat und auch ein CNC-Fräte ist das kein Problem so etwas zu bauen, wer es nicht hat kann sich die Unimat1 ML holen de es auch schon mit CNC-Maschinen gibt.
After seeing so many really bad pieces produced by this very sketchy machine, it's good to see that, like the ubiquitous CNC engravers, you really CAN make real things (though very slowly) with it.
This is some evil genius shit! Bloody awesome!!!
have you released ANY CAD FILES
Unfortunately, I made it without drawings, so there is no data.
Recently, I'm thinking of making a 5-axis CNC on epoxy granite.
But it is very hard job.
so Before that, I'm thinking of making the frame of this lathe out of epoxy granite and releasing the data as a test.
What do you think?
good job. to reduce the swarf getting in the x motor/belt flip the whole thing so X motor is UP in the air.
Hello. Very nice job !! Congratulations.
How do you compensate the backalsh of screws (which is to my knowledge quite important on those machines (almost 0.2mm).
Thanks !
As for backlash, I use Linuxcnc's backlash correction function.
DUDE YOU HAVE MAD SKILLS N LOVE THE MUSIC TO !HI FROM USA BROTHER !~!!!
So, you cannot make a CNC out of it using only this tool itself, can you?
With this, maybe you can.
ua-cam.com/video/-0PXTLIW-5c/v-deo.html
@@a-cnc-f ah, I see, thanks. Will 3018 do?
I think 3018 is not strong enough.
The reason I chose the 3010 should be that the stroke of each axis is short and the frame is small so it's strong.
The longer the linear shaft, the lower the strength.
👏👏👏 🙌 REALLY NICE, MAN!
Super
hi, great build! Do you have an stl for the motor mounts that go on the end of the axis? Particularly the mount at 3:30 ?
Unfortunately, I haven't created STL data for the parts.
Very nice work. What is the software used for creating the Grbl-file (CAD tool)? Can you do some CAD tutorials for Lathe?
Thank you for interest.
Software is Linuxcnc. I didn't use CAD and CAM for this.
I manually made G-code.
Sorry, I don't have time to create the tutorials, because concentrating to create 5axis video series.
How about a refillable spray can and fill it with air to blow the chips away
Blowing away the cutting chips is problematic.
The place where I am working is a normal room.
There is a desk for my child to study, and for my wife wiorking where I work, so I can't leave cutting chips in the room .
@@a-cnc-f ty for responding, you remind me quite a bit of myself, I have joined your membership to try to help you out, I wish you the best of luck and if you need something maybe I can help, let me know, I’m in Hawaii
@@cda4662 Thank you, I'm really happy.
Hawaii!
I know it's a great place.
I've never been to go there, but I want to go there someday.
Does the belts on the steppers flex much when steel is machined? I guess I'm wondering about the mechanical tolerances of the CNC.
This lathe has the ability to lathe steel, but the machine is not strong enough for stable processing.
Just found your channel, this is something I might be interested in building for myself, especially to do some reverse threading for some bicycle parts. Have you released the CAD files for the new plates?
Thank you for your interest
Unfortunately, I haven't created any CAD data for this modification, so I can't post the data.
@@a-cnc-f no worries. I’ll see what I can come up with on my own. Thanks for the inspiration and cool video.
I was amazed by your work. I learn a lot by watching your videos, although I know something about this cnc thing.
Incredible. Good job! Subscribed!
Software plis
The software is machinekit
this is painful to watch.....its like a cooking show but using playdoh instead.