@@JacobSherwood your hard work has inspired me to try and make a small go kart almost like yours I’ve watched your video a couple of times have you had the chance to make the jig if so do you have the dimensions for the kart I’d be so much help for my project .also the camber on the front tires looks awesome what angle did you use and how is that working out 😅
If you get your caster angle closer to zero you won't lift a tire at lock. You may not snap back to center as well but you're not trying to go straight. Awesome build
If you built it like 1 size bigger you defo could've put a torque converter on it and maybe even done a front engine setup in an attempt to take some load off the rears and spin the tires without sleeves. Also, sprung front hubs would allow the kart to keep all 4 tires touching instead of the castor angle raising a corner of the frame, so that might've helped, too.
I used a Shorter intake manifold with pulse fitting on top of it so my carb sits closer to engine. Works super well. Just search up This -> 475INT Mikuni PZ/VM intake manifold made by EC Carburetors
Awesome build dude ! Any chance of getting the measurements of the lower part of the frame length and width and height from lower frame to underneath the seat ? Appreciate it dude 👌🏻🤘🏻🤘🏻😎
для дрит карта не нужен угол наклона передних колес, так всегда теряешь управляемость. Для обычного карта, угол нужен для разгрузки оси и сохранения резины. for a drift card, you do not need the angle of inclination of the front wheels, so you always lose control. For conventional karting, the angle is needed to unload the axle and preserve the rubber.
ive seen a few of these mini drift karts on utube i been looking for build plans as id love to make a few when i get some land for me n m8s to have drift days
Hey Jacob, do you think a honda gx200 is een good engine to use? I am wanting to build one myself using an used go kart. I guess thats the best way to start up from??
So is there like some specific meshes that you build this frame from or did you like just guess your way through it all ??? … reason why I’m asking is that I’ll likely to build one myself but I don’t have any measurements to go from
eyeballed? guesstimated? i saw no akermans compensation. or worse. it was reverse akermans. i saw terrible scrub steer radius. vertical kingpins? wheres the inclination? wheres the line to the center of contact? you wanna copy badly designed and faulty steering geometry, go for it. you want control and useability? dont copy this layout.
It’s not going to be 400 dollars for you unfortunately, the solid axle kit itself is almost $500, and rims and tires are about $300.. perks of having left over parts around.
Hello. I would like to buy such a mini-kart. How much does it cost. Is it possible to send it to Russia? guys from car rivive don't reply to messages hope to cooperate with you.
I'd pay for the plans if you have anything available like that. I've been wanting to make a kart since I saw the aussies(name is slipping my mind right now) video of their kits.
your akemans/tierods are backwards. no kingpin inclination. excessive scrub steer radius due to no kingpin inclination. excessive bump steer due to excessive scrub steer radius. all adding up to steering that is unpredictable, clunky, and overall just a waste of time. for some reason i cant correlate "scrap" with "pile of neatly notched and bent tubing with out any signs of RUST whatsoever" building from SCRAP involves several weeks of grinding rust off everything, and constantly changing designs and approaches as the suitable piece of scrap for what was planned doesnt exist, and another piece of rusty iron attached differently will do a better job anyway...
If only nursing homes had these types of mobility scooters… All jokes aside, sick build!
🙋♂️
Creating a petition for this 🤣 much love boys
If nursing homes had these id be visiting grandma every day
@@JacobSherwood your hard work has inspired me to try and make a small go kart almost like yours I’ve watched your video a couple of times have you had the chance to make the jig if so do you have the dimensions for the kart I’d be so much help for my project .also the camber on the front tires looks awesome what angle did you use and how is that working out 😅
@@throttle_therapy underrated coment
If you get your caster angle closer to zero you won't lift a tire at lock. You may not snap back to center as well but you're not trying to go straight. Awesome build
What are thw dimensions of this build? And how wide is the wheelbase?🤔 nice build anyways!🤩👍
So grateful for this video, I have been itching to build one but had close to 0 references. Thanks
If you built it like 1 size bigger you defo could've put a torque converter on it and maybe even done a front engine setup in an attempt to take some load off the rears and spin the tires without sleeves. Also, sprung front hubs would allow the kart to keep all 4 tires touching instead of the castor angle raising a corner of the frame, so that might've helped, too.
Love these little drift carts, hope Car make Revive or someone else puts them into production soon.
Sort the steering out and it'll be even better.
am i the only one who thinks it would be soo cool to make a go kart with a proper body like a car or add a body to an existing kart
Awesome job. Keep up the great craftsmanship and hard work my friend. Fab On. Weld On. Keep Making. God bless.
Thanks for the support! Cheers 🤝🔥
Jacob You're Driftkart God, keep it up! Bro much love as allways from Poland ❤
Much love bro 💜
I used a Shorter intake manifold with pulse fitting on top of it so my carb sits closer to engine. Works super well.
Just search up This -> 475INT Mikuni PZ/VM intake manifold made by EC Carburetors
You should totally do a drift trike!! That could be such a good build
Been waiting a min for a new vid
Appreciate the patience!! This a good one
@@JacobSherwood bro it was. I really dig the hr vids. I know they arent for most but im 3rd shift. We need that go kart content bro!!
Ten horses are hiding inside of the go kart!!!!!!!!!
Great build 👍🏻 do you have plans for sale for this build??
Soooo sick!!! Keep up the hour long vids I love binge watching good vids that are longer
Sweet Build!
Can u make a tutorial how to build the axle?👍
Build looks super cool🤙🏽
I got a cart just like yours Jacob
Welcome to the club 😎
What is you wheel base, and width on the scooter? Great job on the build.
Very cool project. Makes me want one.
Sick build .
What an awesome video! Made me want to get one ! What are the dimensions on these Karts? Thank you in advance.
That song u was using was really creeping me out jake
Can't wait to see more videos
Awesome build dude ! Any chance of getting the measurements of the lower part of the frame length and width and height from lower frame to underneath the seat ? Appreciate it dude 👌🏻🤘🏻🤘🏻😎
Letssss gooooo🔥🔥🔥
too much fun
@gokartgod where you at with the vids man?
Hi Bro! Long time non seen
для дрит карта не нужен угол наклона передних колес, так всегда теряешь управляемость. Для обычного карта, угол нужен для разгрузки оси и сохранения резины. for a drift card, you do not need the angle of inclination of the front wheels, so you always lose control. For conventional karting, the angle is needed to unload the axle and preserve the rubber.
How many degrees of caster did you use for your front suspension?
I run 7°
COOL AF !!!! 🤙
Nice! what size tubing did you use?
Seriously Awesome!
awesome - building one
what does the big black handbrake/left hand lever thingy do? whats the piston it's connected to?
I think its the brake.
ive seen a few of these mini drift karts on utube i been looking for build plans as id love to make a few when i get some land for me n m8s to have drift days
Would love some more info on the dimensions/wheelbase and axle. Would be cool if you could add that
I love it! Is there name for this type of build? Thanks in advance!
Well done would you sell some sizes or plans thanx
Hey Jacob, do you think a honda gx200 is een good engine to use?
I am wanting to build one myself using an used go kart. I guess thats the best way to start up from??
What size sprocket??
Plz
Realllly need to know 😫😫😫
Where to buy those part ? TKS!!
So is there like some specific meshes that you build this frame from or did you like just guess your way through it all ??? … reason why I’m asking is that I’ll likely to build one myself but I don’t have any measurements to go from
What size tubing is that? 1-1/4” 0.065”?
thank you Bro
Could you maybe make a list of all components? I's rlly appreciate it!
What is the length of the axle?
Do you know anywhere I could get a frame like your drift kart I don’t have a welder and have been looking for a frame for a few months now
He custom made it
Do you know where I can get a set up like this i looking for a kit to build
Hey man is a awesome build. Is there anyway you can send me a plan with the dimensions for the chassis
What size tubing did you use for the main chassis
excellent!!!!! good job
can i ask how or where can i get the measurement for the frame plzzz
Amazing
So cool! Do you sell them?
Got some basic measurements of the frame to share?
Promo game strong g
Appreciate you bro 🤞🏻🥵
Sick build bro. I've been wondering for a while now What kind of welder do you use? And did you go to welding school?
I use a Hobart handler 140 on gas mig. Self taught baby!
Beautiful bro. Thanks for the reply big dawg Have a good day
@Jacob what degree did u make the front spindles ?
Hey bro love watching your videos what size tubing you use.
Where do you find parts for your drift kart? A lot of the spindles and bearings aren’t universal and can’t find parts for mine anywhere
Bmikarts, cometkartsales, Fastech racing
bro where to buy the ball bearings, tires and axes and stuff like that
Where did you get your table
Where do you find your rims and tires. In Canada trying to find them under 200$ is hard.
Any information about this build?
Guys please tell me from where you got the frame
Nice n gnarly
how size your pipe build this drift kart?
and how milimters this pipe?
Hey how much for a frame like tha
where do you get your tyres from?
what is the length wide and height of the frame
You should sell these. Complete or roller. I’d buy one. Seriously pm me, I’ll buy a roller chassis. I could have fun in my carport all day.
There are already guys who sell something very similar. UA-cam: Carmakerevive
Carmakerevive! Or build one yourself. I have no time for commissions these days. They’re so fun tho!
V cool cart
what is the all the sizes
What is the caster and camber spec? Thanks. Cool builds
eyeballed? guesstimated?
i saw no akermans compensation. or worse. it was reverse akermans.
i saw terrible scrub steer radius.
vertical kingpins? wheres the inclination? wheres the line to the center of contact?
you wanna copy badly designed and faulty steering geometry, go for it.
you want control and useability? dont copy this layout.
cool, but the steering?!
I'm 6'2 250. Def building one of these (a bit beefier though) and going to rip shitties all day.
What cc is it
post a parts list if its $400
It’s not going to be 400 dollars for you unfortunately, the solid axle kit itself is almost $500, and rims and tires are about $300.. perks of having left over parts around.
@@adrianperez7362 it's not a $400 build then. And you didn't post the parts list still
Dimensions on frame size tube so I can build one
🇧🇷🤝🇺🇲 gol kart yes ❤️
Yow J... Any measurements
Sup
You need time to drift XD
Do you sell them?
would you sell scrappy?
Where did you buy the tires/rims? The cheapest I can find are $250 for a set.
check out BMI , thats where im getting my stuff at
Are u sell the carts? 😁
Tengo uno de ellos
What is a good engine
thats the wrong bolt for the samn crank its a fine thread
Ay lev in Bilgariya , in Polkovnik Dyakovo🙏❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
Amenle
Hello. I would like to buy such a mini-kart. How much does it cost. Is it possible to send it to Russia? guys from car rivive don't reply to messages hope to cooperate with you.
hi can u make me sumthing? i have scraps tew
Lmaoooo
I'd pay for the plans if you have anything available like that. I've been wanting to make a kart since I saw the aussies(name is slipping my mind right now) video of their kits.
Car make revive, they are selling the karts for $2600-3100 with no engine carb or wheels
They are nice but for that price they can keep it
@@2259chevy agreed
Is it bird?Is it plane?Can it leap tall buildings in a single bound?
Hey ca
Hay man just wanted to know is it cool if I bild 1for my self brother
I won't one
Hey Jacob
Long time watcher, first time commenter😅.
Do you know the dimensions, HxWxL?
The kart is already gone :( I believe 30Lx14Wx16H but I’m not certain
@@JacobSherwood Thanks, any tips on how to get the proper caster & camber angles so my front end will sit & perform right?
your akemans/tierods are backwards. no kingpin inclination. excessive scrub steer radius due to no kingpin inclination. excessive bump steer due to excessive scrub steer radius.
all adding up to steering that is unpredictable, clunky, and overall just a waste of time.
for some reason i cant correlate "scrap" with "pile of neatly notched and bent tubing with out any signs of RUST whatsoever"
building from SCRAP involves several weeks of grinding rust off everything, and constantly changing designs and approaches as the suitable piece of scrap for what was planned doesnt exist, and another piece of rusty iron attached differently will do a better job anyway...