One thing for sure and two for certain it works like new and did not even take ten minutes for me maybe cause I enjoy fixing things when I know it still works. Thank You for sharing from Harrisburg Pennsylvania 💌🤗❤️✌️ and 🙏❣️
I have a fan that powered on but no movement. I found your video on UA-cam and figured it was worth s shot. I followed your steps and BAM! The fan works great now. You saved me 40-50 bucks! Great video and instructions. Thanks a lot. I am now a "fan" of yours. 😁
quick tip. before you take apart the motor casing, use a sharpie to draw a line down the side touching every part of the case. That way you can easily see how the pieces fit back together. Great vid!
You've saved my family $40. .My wife had planned to purchase a new fan the next day. I quickly visited UA-cam, and boom your video was the first. Quick DIY helped me repair 1 standing fan. Thanks
I oiled my fans a few days ago, just noticed this video today. Thankfully, my fans (two different brands) had fewer screws and I was also able to access the two ends of the shafts without taking the motors apart. Not a difficult task, but perhaps a bit of a chore to fit the pieces back together. My suggestion to anyone afraid of taking their fan apart is to take a video of the process. If you can't put it back together, just refer to your video to see where your pieces should be.
Just did exactly the same and worked otherwise we would've slept on 33 degrees 😂 , thank you so much for this helpful video , now i know what to do when it doesn't turn ❤
This is a very clear and concise video. My 15+ year old fan was not spinning and I followed your step by step instructions. Only difference in my case was that the pin didn't come out that easily, I had to knock on it and use pliers to yank it out. I also substituted oil for wd40 as this is all I had on hand. Honestly my fan now spins faster and makes more wind than before! As good as new! Thank you so much for this video. Liked, subscribed and shared.
Dear Vins & Annette, My stand fan stopped after 1 year of use, watched you video, it helped. At 1:37, I was unable to open the fan motor cover after many tries despite four front screws removed, this Aerogaz brand stand fan has no screw at the back of the cover. Initially I used WD40, it did not help, then I dripped Singer Oil from outside into the rotating rod (without removing the motor cover). Waited for a few minutes for the oil to settle in. Then, I manually used my fingers to turn the rotating rod, at first it was very stiff, slowly it can spin smoothly. Re-installed all external parts removed. Plugged it, power on, it worked ! Many thanks. CKL 13/07/2023 Thu 1008 Singapore
Thanks and blessings to you bro. I looked at this video lastnight and was able to repair my fan with your instructions. You have a good heart to share these edifying videos. Greetings from Trinidad & Tobago
the fan i'm using in my room has stopped spinning and my mom said we should throw it away. it is still in good condition and it would be a waste to throw it so i came here looking for solutions. will definitely try and do this one. thank you for the clear and step by step instructions!
Sir you are the best, for days now my fan stopped working and we have not heard a good sleep but you through you now I just replied it. More grace and I thank God for making me to understand without mistake. Thank you Sir
Thank you! This video helped me while there was a massive heat wave in my city and my fan stopped working. Had to watch it at x1.5 speed to fix this thing as fast as possible.
Just now , my fan cannot move and feels so heavy to rotate , then i youtube and your video was found first , i follow all the step you provided and now my fansl can operate like usual , thank you my brother ! You are my saviour ❤
Was about to throw my fan out when I decided to check if there wasn't a fix online and yep, some lubricant and a good clean and it's as good as new. Thanks for saving me some dosh y'all.
Thank you. I have the Honeywell Pedestal Fan and it looks like you have to break the plastic to get easy access to the motor, but once I got close enough to it, I added a few drops of oil which was enough to loosen the friction from the dust and get it moving again. Saved from the trash!
Thanks very much sir...my been stuck for almost years and we currently suffering from the heat wave in South Africa 🇿🇦 so im glad your video helped me out,it spinning now.i near threw it away,but i guess a little lubricatation helped out.❤😊
Omg I just fixed my fan! 3 seconds from being put in the garbage! Thank you! It sounded like the motor because it wouldn't spin but I figured 'give it a shot' before tossing it and it worked!
Can you tell me which oil you used for the fan? Bcz my fan always spins late even when I am using the pen. But now, it's not working totally. First, it sounded like a creech then it stopped Fully 😢... I want to try this method
well all I can say is those 68 that did the thumbs down??? Their fan was just done is all........this didn't help my stand up fan but........a metal floor fan I paid quite a bit for???? different story, I couldnt get the face off so I sprayed lubricant real slow where it rolled down to get all the rusted areas and low and behold.......wa la !! I know this fan has been on my back porch for nearly a year, out of any kind of rain.........and its work'n like a dream.........thank you Vin
Thank you for posting this video. Still working on my fan.but meanwhile gaining confidence while watching each step of the, I have not this done this before and no nothing . However, going thru each step, I gained a lot of confidence and learned about parts the of a fan. This is an excellent video for DIY people. Thank you 😊
Thank you very much. I have this retro-style electric fan that suddenly stopped spinning. I thought the motor had burned out because I use to turn it on and forget about it, sometimes for days and days. This is not a cheap fan so I really wanted to fix it. I called the manufacturer, but they said they no longer service those fans. I then called a local elecrician who said it would cost $85 just to look at it. Strike two ! Actually I bought two of these fans back in 2010 so they matched perfecty in my living room on top of my stereo speakers . Buying a replacement would not be easy. I looked online, but could not find an exact match. Even if I had found a replacement there were other things that were higher on the priority scale. Finally I decided to Google it. Not sure why I hadn't though of that before but my mind was set that I had blown the motor ? I followed the instructions step by step as best as I could, making sure not to get the screws mixed up. It only took me about an hour to take it apart and put it back together again. After all the work was done, I turned the fan on with my fingers crossed. I did not want to burn the house down. To my surprise, everything worked perfectly ! The fan is even more wisper-quiet than it was before. What I should have done was clean it up a little before putting it together. So I might have to do that. Thanks a lot for this video !
I'm glad I came across your video. I had a 3 yr old pedestal fan that wasn't spinning and I was planning on throwing it out. I watched the vid and followed your instructions and I got the thing cleaned up and running in less than an hour. Good stuff!
I am a big fan! Thank you so much! I now learned how I could start rotating again like my siblings. But the surgery was a bit painful to do myself, especially without sedation!
Great video with superb production values. Well done! The only change I would make is to have as the first instruction, unplug fan from electrical outlet. 😂🔧👍
Bro thank you very much for this... I used to just spray the bolt part with a spray lubrificant... but after 4 years the motor just stopped.... it got current in in but the blades wont move.... So I did this... I removed everything like you've showed and oh boy... the bearings were stuck with gunk from over the years... so I picked a small file and cleaned the bearings... sprayed them with graphite, lube them up good with vasseline... and now guess what... Is works like new... no noise, no heating of the motor.... So fking great man... Feels so good to fix stuff :) Thanks!
Wow, thank u poh taLaga sa video na gumana na yong eLectric fan namin.. d na kme bibili nang bago kasi gumana na. Dati ang number 3 lng ang gumana ngayon pati number 1 and 2 ok na ang ikot nya.. nilagyan ko lng nang baby oil yon lang ang available kasi..thank you
So cool to watch, so frustrating to do. The blade assembly part of my fan seems to be stuck on the rotating axis. As it's made of soft plastic I'm afraid to apply too much pressure and break it. I used a ton of WD-40, without success. I'm letting it soak in it for the night, we'll see tomorrow. 😞
@@VinsAnnetteSingh I did it! I was able to unstuck the rotating blades from the axis! 🥳🤩 I also cleaned all the parts of my fan, added oil where needed and... it still does not work. 😔😭 I now think it might be the capacitor. 🤦🏻♂️😔
Good job! It's always nice to have a hubby or somebody in the family who knows how to fix things, like #20, and thank you for sharing your talent in making "broken" things fixed! Stay safe and have a great day.
I tried sewing machine oil and 3 in 1 with silicone. None worked for a long period. Most was about 2 weeks. So I bought some brake slider grease in a small package. Cost around 2 dollars. Used a Qtip to apply the grease on the parts shown. So far so good.. Update; spread the grease heavy on both sides of the spindle. Especially the back.
Very correct, sewing machine oil will wash the original machine oil and will dry very fast, and the axis will overheat and the fan will be broken, that’s my experience, The key is a good quality grease
F*ckin LEGEND!!! That worked perfectly Runs like brand new again. I hadn't even realized how slow it had become on the highest setting. Now it's just a hurricane!!!!
Thanks for the tip. Unfortunately this video gonna be useful for those who purchased entry level fans that tend to fail a year or two after purchase. Had a Morries and Mistral, where the fans just stopped working as early as 6mnths in, which is ridiculous. Been using Mitsu or KDK/Panasonic to save all of these hassle but then again, I may pick up an affordable, whack it and see if I can do this when it fails one day soon.
Crazy how people throw away things that just need a little TLC and maybe a bit of oil. ; ) Thanks for the vid, I just got a brand new fan from the curb.
Mine was a tab different in where the parts were. The hub bearing was actually out of the rear part of the motor. I must've tried to put it together like that and it wasn't until I watched three videos showcasing the same thing like no fan blade spin So thanks to your video I was able to figure out where I was going wrong. So in the rear I just had to lift up three tangs and put the hub bearing in there snug as a bug in a rug. LOL :)
Had to throw a nice standing fan that stopped spinning during the night, but with the power still on, and now the shaft is just impossible to turn. Guess the motor or bearings got burned out, since it had been turning slow when starting it for a while, but now it decided to die, it has power but the shaft is seized solid
Just about to try and fix my fan, wish me luck I will let you know how it goes lol x So just followed this video and my fan is working again, I'm so glad I managed to do it as we are about to have a heatwave with a serious weather warning. Thankyou so much for making this video it has been a god send 😀😀😀x
welcome and thanks for giving it a try and thanks for watching...........Great and happy to help 😊 Pls subscribe for more related videos and updates on upcoming videos. Thank you
One thing for sure and two for certain it works like new and did not even take ten minutes for me maybe cause I enjoy fixing things when I know it still works. Thank You for sharing from Harrisburg Pennsylvania 💌🤗❤️✌️ and 🙏❣️
thanks for feedback and glad to hear it worked 🌟👍🏻👍🏻👍🏻👍🏻 have a great weekend ☺️
I have a fan that powered on but no movement. I found your video on UA-cam and figured it was worth s shot. I followed your steps and BAM! The fan works great now. You saved me 40-50 bucks! Great video and instructions. Thanks a lot. I am now a "fan" of yours. 😁
Sounding like the fc150 guy
“I just saved myself 150$ bucks”
What types of fans do you all have. Just buy a new one for $30
quick tip. before you take apart the motor casing, use a sharpie to draw a line down the side touching every part of the case. That way you can easily see how the pieces fit back together. Great vid!
Pro tip should be pinned!
this is why I love the internet, thank you for the good idea!
😊😊😊😊m😊
Absolute facts!
Wow that applies to so many things!
Thank you so much! I'm a 66 year-old grandmother and I just fixed my fan by myself.
Wow congrats 😊
Good to know that and thanks for sharing.
Have a great week ahead and keep safe.
Thanks for this! My boyfriend was already throwing our fan into trash but I was able to fix it with help of your video. 😄 And impress my boyfriend!
Nice
Wow, i totally believe everyword that comes from your mouth, you got the whole fuckin gang laughin
Bullshit
Now go get a boyfriend that doesn't throw things out so fast.
Lol is he even a real man? Why’s he already throwing it out?! Lmfao.
You've saved my family $40. .My wife had planned to purchase a new fan the next day. I quickly visited UA-cam, and boom your video was the first.
Quick DIY helped me repair 1 standing fan.
Thanks
Glad I could help
I oiled my fans a few days ago, just noticed this video today. Thankfully, my fans (two different brands) had fewer screws and I was also able to access the two ends of the shafts without taking the motors apart. Not a difficult task, but perhaps a bit of a chore to fit the pieces back together. My suggestion to anyone afraid of taking their fan apart is to take a video of the process. If you can't put it back together, just refer to your video to see where your pieces should be.
i add High Temperature Bearing Grease, lubricate fan oil + silicon oil, n my oil 20 years fan speed like crazy.
Just did exactly the same and worked otherwise we would've slept on 33 degrees 😂 , thank you so much for this helpful video , now i know what to do when it doesn't turn ❤
This is a very clear and concise video. My 15+ year old fan was not spinning and I followed your step by step instructions. Only difference in my case was that the pin didn't come out that easily, I had to knock on it and use pliers to yank it out. I also substituted oil for wd40 as this is all I had on hand. Honestly my fan now spins faster and makes more wind than before! As good as new! Thank you so much for this video. Liked, subscribed and shared.
Fantastic!
that's awesome, thanks for the compliment and support
have a great day ahead
Qq
Dear Vins & Annette, My stand fan stopped after 1 year of use, watched you video, it helped. At 1:37, I was unable to open the fan motor cover after many tries despite four front screws removed, this Aerogaz brand stand fan has no screw at the back of the cover. Initially I used WD40, it did not help, then I dripped Singer Oil from outside into the rotating rod (without removing the motor cover). Waited for a few minutes for the oil to settle in. Then, I manually used my fingers to turn the rotating rod, at first it was very stiff, slowly it can spin smoothly. Re-installed all external parts removed. Plugged it, power on, it worked ! Many thanks. CKL 13/07/2023 Thu 1008 Singapore
I did the same
Thanks bro. I did every step amd now my fan is spinning ❤ much love & respect for thia video 100%
Bro, thank you, I’m in Jamaica 🇯🇲 Trust me u just saved a life🇯🇲♥️🔥
Glad I could help
hi pls subscribe for more
Thanks
From Jamaica also Wow I am so grateful right now
Thanks and blessings to you bro. I looked at this video lastnight and was able to repair my fan with your instructions. You have a good heart to share these edifying videos.
Greetings from Trinidad & Tobago
Hi bro, thanks for the compliment and blessings ❤️ glad to help 🙏
Thanks man! Really helpful, I was about to throw my whole fan to the garbage. I replace the grease with WD40, thanks to you I still have a new fan.
Glad I could help
hi most welcome
pls subscribe for more related videos
It is safe to use WD40?
At the end of the day the fan motor burn out so I had to throw it out.
the fan i'm using in my room has stopped spinning and my mom said we should throw it away. it is still in good condition and it would be a waste to throw it so i came here looking for solutions. will definitely try and do this one. thank you for the clear and step by step instructions!
Sounds great!
Thanks for the compliment and have a great day
Sir you are the best, for days now my fan stopped working and we have not heard a good sleep but you through you now I just replied it. More grace and I thank God for making me to understand without mistake. Thank you Sir
Thank you!
This video helped me while there was a massive heat wave in my city and my fan stopped working.
Had to watch it at x1.5 speed to fix this thing as fast as possible.
Glad to help! Take care and stay safe 🙏 ❤️🙏
Just now , my fan cannot move and feels so heavy to rotate , then i youtube and your video was found first , i follow all the step you provided and now my fansl can operate like usual , thank you my brother ! You are my saviour ❤
Glad I could help!
Happy to help! Pls subscribe for more related videos
Thanks
Bro go UA-cam - are you a good person by living waters
Was about to throw my fan out when I decided to check if there wasn't a fix online and yep, some lubricant and a good clean and it's as good as new. Thanks for saving me some dosh y'all.
Good Job 😊 Congrats in fixing your fan on your own 👍
Thank you, man!
You saved my money from buying a new fan.
And not only that, I also learned something new, so I really appreciate you.
Glad I could help!
Thank you. I have the Honeywell Pedestal Fan and it looks like you have to break the plastic to get easy access to the motor, but once I got close enough to it, I added a few drops of oil which was enough to loosen the friction from the dust and get it moving again. Saved from the trash!
Glad it helped
Thanks so much for this. I cant believe I prepared mine today after spending money to fix but keep spoiling. But now I have fixed it.
Damn, managed to fix my fan, i thought it's days were over, it's kicking like a new fan now. Really appreciate the tutorial.
most welcome and thanks for the complement
stay connected for more related videos
Thanks
Thank you so much!!! You saved me about $50 that definitely could be used for necessities!!! May Our Lord bless You in every way❤!!! ❤❤❤
Glad I could help!
Thanks very much sir...my been stuck for almost years and we currently suffering from the heat wave in South Africa 🇿🇦 so im glad your video helped me out,it spinning now.i near threw it away,but i guess a little lubricatation helped out.❤😊
Omg I just fixed my fan! 3 seconds from being put in the garbage! Thank you! It sounded like the motor because it wouldn't spin but I figured 'give it a shot' before tossing it and it worked!
Can you tell me which oil you used for the fan? Bcz my fan always spins late even when I am using the pen. But now, it's not working totally. First, it sounded like a creech then it stopped Fully 😢... I want to try this method
@SwethaSelvam1801 I usually use spray lube like wd-40 butvthus time all I had was clipper blade spray. Cooling and cleaning stuff walmart $4
well all I can say is those 68 that did the thumbs down??? Their fan was just done is all........this didn't help my stand up fan but........a metal floor fan I paid quite a bit for???? different story, I couldnt get the face off so I sprayed lubricant real slow where it rolled down to get all the rusted areas and low and behold.......wa la !! I know this fan has been on my back porch for nearly a year, out of any kind of rain.........and its work'n like a dream.........thank you Vin
Thank you for posting this video. Still working on my fan.but meanwhile gaining confidence while watching each step of the, I have not this done this before and no nothing . However, going thru each step, I gained a lot of confidence and learned about parts the of a fan.
This is an excellent video for DIY people. Thank you 😊
Thank you very much. I have this retro-style electric fan that suddenly stopped spinning. I thought the motor had burned out because I use to turn it on and forget about it, sometimes for days and days. This is not a cheap fan so I really wanted to fix it. I called the manufacturer, but they said they no longer service those fans. I then called a local elecrician who said it would cost $85 just to look at it. Strike two ! Actually I bought two of these fans back in 2010 so they matched perfecty in my living room on top of my stereo speakers . Buying a replacement would not be easy. I looked online, but could not find an exact match. Even if I had found a replacement there were other things that were higher on the priority scale.
Finally I decided to Google it. Not sure why I hadn't though of that before but my mind was set that I had blown the motor ? I followed the instructions step by step as best as I could, making sure not to get the screws mixed up. It only took me about an hour to take it apart and put it back together again. After all the work was done, I turned the fan on with my fingers crossed. I did not want to burn the house down. To my surprise, everything worked perfectly ! The fan is even more wisper-quiet than it was before. What I should have done was clean it up a little before putting it together. So I might have to do that. Thanks a lot for this video !
I'm glad I came across your video. I had a 3 yr old pedestal fan that wasn't spinning and I was planning on throwing it out. I watched the vid and followed your instructions and I got the thing cleaned up and running in less than an hour. Good stuff!
Glad I could help............wow aweseome and thanks for the info
Please like, share and subscribe for more related videos
Thank you and have a great day ahead
I am a big fan! Thank you so much! I now learned how I could start rotating again like my siblings. But the surgery was a bit painful to do myself, especially without sedation!
if youre such a big fan, do you need oiling or what?
Thank you so much. I managed to get my fan to spin again with the help of your tutorial. 🙏
Thanks! Great video, saved me $80 CAD!
Hi, you are most welcome, thanks for the support and Glad to help. Have a great day ahead ✨🎉🎉🎉🎉✨
Never mind the money, I can't seem to find a fan that has the same power output as my old one! Fingers crossed this works on my relic!
Well it saved you 78$ now 😂
I did everything exactly how you did it and my fan works again! Thank youuuuuu🎉❤
Great video with superb production values. Well done!
The only change I would make is to have as the first instruction, unplug fan from electrical outlet. 😂🔧👍
Great point!
Thanks for the comment 😊
Please subscribe for more related videos
Thank you
Thanks before i watch this vidoe my fan is not working but now i am relxing and very appreciate how you explain step by step thank you again and again
Great to hear!
Bro thank you very much for this... I used to just spray the bolt part with a spray lubrificant... but after 4 years the motor just stopped.... it got current in in but the blades wont move....
So I did this... I removed everything like you've showed and oh boy... the bearings were stuck with gunk from over the years... so I picked a small file and cleaned the bearings... sprayed them with graphite, lube them up good with vasseline... and now guess what... Is works like new... no noise, no heating of the motor.... So fking great man... Feels so good to fix stuff :)
Thanks!
Glad to help and happy for you :)
Please like, share and subscribe for more related videos
Thank you and have a great day ahead
Thank you! Followed every step and got my fan working again, life saver!!
Glad it helped!
Your are a super man ,first time I was not believe , but I did all your tips now my fan is working 100%🎉🎉🎉🎉❤❤
Saved me from spending a thousand rupees... Thank you so much .. all my fan needed was a quick motor oil after all 🙏🏻
wow thanks for this.. went to a repairer for this issue and he took me a lot of money whereas it was something i could do my self.
welcome and please subscribe for more related videos
Thank you
my fan had pretty much the same problem, and although it was slightly different than yours, I managed to fix it! so thanks a lot!!!
Glad I could help!
Wow, thank u poh taLaga sa video na gumana na yong eLectric fan namin.. d na kme bibili nang bago kasi gumana na. Dati ang number 3 lng ang gumana ngayon pati number 1 and 2 ok na ang ikot nya.. nilagyan ko lng nang baby oil yon lang ang available kasi..thank you
You sir are a man among boys! A king among men!
Thank you for the informative video!
Glad to help
Thanks for the compliment 😍
Saved my life I was dying in his heat without my fan. I put my fan motor back on backwards but it works now 😅
tried it yesterday now i have 2 other that thought were broken to fix great video thanks vins and annette
Glad to help
Great video. It was the first one that I clicked on . The step by step instructions are right on point. Thanks
Waoh..., Thanks so much , I just followed these steps,it was taking a while to rotate at first then I waited and now it's perfectly working
Thank you, thank you, thank you.
My fan is working magic because of your help. Thanks a lot.
Glad to hear that
Most welcome 😊
So cool to watch, so frustrating to do. The blade assembly part of my fan seems to be stuck on the rotating axis. As it's made of soft plastic I'm afraid to apply too much pressure and break it. I used a ton of WD-40, without success. I'm letting it soak in it for the night, we'll see tomorrow. 😞
You can do it!
@@VinsAnnetteSingh I did it! I was able to unstuck the rotating blades from the axis! 🥳🤩
I also cleaned all the parts of my fan, added oil where needed and... it still does not work. 😔😭
I now think it might be the capacitor. 🤦🏻♂️😔
Good job! It's always nice to have a hubby or somebody in the family who knows how to fix things, like #20, and thank you for sharing your talent in making "broken" things fixed! Stay safe and have a great day.
You are so welcome
How about women learning how to do this? Still relying on a man? Pathetic laziness!
Orrrrr, you could also learn to fix things YOURSELF, instead of always depending on a “hubby”. I mean, isn’t that why you’re here? 😂
I tried sewing machine oil and 3 in 1 with silicone. None worked for a long period. Most was about 2 weeks. So I bought some brake slider grease in a small package. Cost around 2 dollars. Used a Qtip to apply the grease on the parts shown. So far so good.. Update; spread the grease heavy on both sides of the spindle. Especially the back.
That’s a great idea, thanks for sharing
Hope this video helped 🤗
Please like , share and subscribe for more videos. Thanks
Very correct, sewing machine oil will wash the original machine oil and will dry very fast, and the axis will overheat and the fan will be broken, that’s my experience,
The key is a good quality grease
God bless you many many many thanks for your video. I don't know how to thank you
So nice of you, thanks for the blessing and happy to have help
Please like, share and subscribe for more related videos
Thank you and have a great day ahead
I think I'll just buy a new fan. I don't have the patience, brain power or skills to do this, especially by hand lol. Thank you so much for the video!
Most welcome and no harm trying 😊👍
thanks for this. just oiled the spindle and cleaned the spindle sleeves. My fan is going 10+ years and was close to buying a new fan lol
Thanks, almost threw my fan out. Now I'm enjoying a nice breeze 👍🎉
Glad to help
Please like, share and subscribe for more related videos
Thank you and have a great day ahead
You have to remove a lot of stuff but I feel like you're a pro Fixing fans you can make more fan videos
Thanks for the compliment 😊👍🏻
I just tried it following these steps and my fan is fully functional.
Congrats 😊👍 pls subscribe for more related videos
I followed every single step and my fan is now fully functional
Congrats 😊👍
F*ckin LEGEND!!!
That worked perfectly
Runs like brand new again.
I hadn't even realized how slow it had become on the highest setting.
Now it's just a hurricane!!!!
I smile while reading your comments hehe
Thanks for the compliment and glad to help :)
Please like, share and subscribe for more related videos
Thank you and have a great day ahead
Thank you so much. You 've saved my family $60
Glad I could help
Please subscribe for me related contents. thank you :)
Thanks so much this worked for my fan, been running 24/7 for years and just needed some oil to start spinning again
Glad it helped
I will give it a try and give you feedback. Thanks the tutoring was carefully done.
I most welcome
Looking forward for your feedback 😊
Great video man, thanks….my fan even blows better and fast like brand new cuz it’s all lubed up now
I feel like a hero today all thanks to you my fan is working like never before great video
Awwww , it bring a smile to my face after reading your comment 🤗 most welcome
Stay connected for more related videos
Thanks and have a great day
THANK YOU SO MUCH FOR YOUR VIDEO, I ALREADY FIXED TWO OF MY FANS. THX.
Glad I could help
Hi pls subscribe for more related videos.
Thank you
This video really help me, i was about to purchase a new one.. thank you
Glad I could help
This video is the reason why UA-cam is great. Thanks mate!
Thanks for the tip. Unfortunately this video gonna be useful for those who purchased entry level fans that tend to fail a year or two after purchase. Had a Morries and Mistral, where the fans just stopped working as early as 6mnths in, which is ridiculous. Been using Mitsu or KDK/Panasonic to save all of these hassle but then again, I may pick up an affordable, whack it and see if I can do this when it fails one day soon.
Fingers crossed!
Pls subscribe for more, thanks
Thank you, video super easy to follow, slight variation in the model I have, process basically the same, now have a working fan again. 😀
Glad to help 😊
Hi pls subscribe for more related videos. Thanks
Crazy how people throw away things that just need a little TLC and maybe a bit of oil. ; )
Thanks for the vid, I just got a brand new fan from the curb.
Thank for sharing your powerful knowledge I did what I sew u did to your fan..and mind is rotating again 🙌💰💯🌹💝💖🇬🇾
@Vins & Annette That's not always the case, it's one of the more options, like bad capacitor damaged stator,etc...
Mine was a tab different in where the parts were. The hub bearing was actually out of the rear part of the motor. I must've tried to put it together like that and it wasn't until I watched three videos showcasing the same thing like no fan blade spin So thanks to your video I was able to figure out where I was going wrong. So in the rear I just had to lift up three tangs and put the hub bearing in there snug as a bug in a rug. LOL :)
Hi you are most welcome, Pls subscribe for more related videos
Thank you :)
Had to throw a nice standing fan that stopped spinning during the night, but with the power still on, and now the shaft is just impossible to turn.
Guess the motor or bearings got burned out, since it had been turning slow when starting it for a while, but now it decided to die, it has power but the shaft is seized solid
OMG this looks so doable, im so excited to try. Need to get the screw drivers n the oil n gonna give it a shot. Thanks a lot..
Man I just fixed my fan I haven’t used in years thanks to your video really appreciate it
Oh wow! Wish I would have seen this video a few weeks ago! I just threw a fan out because it was acting up. Thanks for sharing!
Glad it helped!
Thanks you so much for tip i had repair IT just because of you ❤
Most welcome, glad to help ☺️ have a great day ahead
How to repair stand fan or table fan (fan won't Spin or Rotate) Step by Step instructions👍🌷Thank you for sharing and see you around.
I done this to mine about an hour ago and it works fine once again.
Thank you!!
Glad it helped
Thank you...... Following your steps I able to fix my fan.... ✨✨✨❤
Fantastic!
please subscribe for more related videos
@@VinsAnnetteSingh sure👍👍😄
Thank you so much you save me a lot of time and money to take it to the repair man
Thank you for your video. I just fixed my fan and feeling like a bad a**
Hahaha 🤣 most welcome 👍🏻
Please subscribe for more related videos 😊
Thanks brother
It was so useful
It warks in sony high speed table fans
Just about to try and fix my fan, wish me luck I will let you know how it goes lol x
So just followed this video and my fan is working again, I'm so glad I managed to do it as we are about to have a heatwave with a serious weather warning. Thankyou so much for making this video it has been a god send 😀😀😀x
That's so sweet of you.
thanks for complement
glad to help :)
pls subscribe for more related video
thanks and have a great week ahead
Very clear video,unfortunately I followed all the steps and my fan still doesn't work the rod is spinning free but its not spinning on .
This is a very nice tutorial please keep up the good and wonderful job.
Thank you very much!
Hi Thanks for the compliment 😊👍
Sir thankyou so much! My fan suddenly not working 😕 but thanks to your video, my fans works fine. Im using wall fan 😂 Really appreciate it.
thank you so very much for posting this, my fan just stopped last night & I was afraid to take it apart....NOW IT'S FIXED! yay!!!
Hi you are most welcome :)
Glad to help :)
Please subscribe for more related videos. Thank you
@@VinsAnnetteSingh ; I've been working on some more fans that people have discarded because they wouldn't turn....LOL!!!!
@@VinsAnnetteSingh ; I did...:-}
what kinda oil works? cause all i have atm is vegetable oil😭
Ah ha!!!
A solution to try!
Now, to obtain motor oil 😁
Hi thanks for watching
Please like , share and subscribe for more related videos. Thanks 😊
Thankyou you saved my 400 ruppes. 🇮🇳. And i am from india
Tq sir for the guidelines....i have up level my repairing skill... I try to my "broken" fan....and the result is good.
Excellent
I thought how just lubricating with oil will work. But to the surprise it works. Thanks..
You're welcome!
hi pls subscribe for more
Thanks
Thank-you you saved our newish fan
Thank you so much. With this video I've been able to fix my fan which I almost gave up on
Glad I could help
Please like, share and subscribe for more related videos
Thank you and have a great day ahead
Thank you I just saved myself fifty bucks😎😎😎😎😎😎
Thanks broo my fan is working now,nice teaching
Great 👍
Please like, share and subscribe for more related videos
Thank you and have a great day ahead
Thank you so much sir .. worked perfectly for me
welcome and thanks for giving it a try and thanks for watching...........Great and happy to help 😊
Pls subscribe for more related videos and updates on upcoming videos. Thank you
Great video 👏. My fan is spinning again.
Thanks for the compliment and glad to help!
Thanks for watching and please subscribe for more videos. Thank you 😊