Fan slow to start or won't startup - Easy Fix!
Вставка
- Опубліковано 10 лют 2025
- Do you have a small electric fan that won't start or starts very slow? You need to view this video! Here we will demonstrate a slow starting fan and how to correct the problem. Then we will demonstrate the repaired fan. This is an easy fix for a very common problem that most anyone could perform.
Here is a link to the oil I use to lubricate fans amzn.to/3Tm8G2R
Please give this video a THUMBS UP and SHARE it with your friends.
Please LIKE and SUBSCRIBE
Support from viewers like you is what keeps us going.
Thank you for your support.
This video is NOT sponsored. Some product links are affiliate links which means if you buy something we'll receive a small commission.
You can purchase 3in1 oil here:
amzn.to/2ZP0qlm
Equipment and software used in making this video:
Canon 90D DSLR: amzn.to/3E64SLH
GoPro HERO9 Black: amzn.to/2RXkbE1
Rode Wireless Go Microphone: amzn.to/3wSv34O
Neewer LED Video Light kit: amzn.to/3fLmAKV
Camtasia 2021 amzn.to/3pMGlFS
Adobe Creative Cloud: amzn.to/3IIPNT3
Adobe Photoshop: amzn.to/3IIPNT3
Please visit our website at:
diywithwayne.com
Visit us on Facebook:
/ diywithwayne
The focus of our UA-cam Channel is to help you save money by doing things yourself!
Please visit our new UA-cam Channel , "Bucket List Time with Ann and Wayne"
/ @bucketlisttime
Thank you for visiting and have a great day!
Wayne
Brilliant. With this knowledge I was able to save our "Lloytron" fan from the skip. Disassembling the fan for me seemed easier than it was for you. I found a large plastic nut holding the fan on. The thread was opposite to all others I've come across - anticlockwise to tighten). A similar large nut was then removed to take the cage off. The fan had come away with a gentle tug. I think my fan has been design with easy access in mind, say for cleaning, and the housing came off after about ten minutes when I had found a flat head screwdriver small enough to fit the clips. The plastic was flexible enough not to break.
The motor screws were as shown in you video.
The motor didn't come away however so I had to try to remove the oscillator gear box at the back (only two more screws) to access the rear bearing.
I then discovered another reason I think my fan was designed with this sort of maintenance in mind. The oscillator gearbox merely needed to be pulled back by a small amount (exposing what looked like a conical grub wheel). I didn't need to remove it at all.
All in all, once the fan and its enclosure had been removed, I had a mere six screws to remove. No more. To think my wife wanted me to scrap the fan....!!
I have a couple of photos of this if you are interested. I would have liked them to accompany this response, but I don't know if or how this can be done here.
I used a tiny amount of "FELLOWES Performance oil" to lubricate the bearings. I bought this from Amazon along with a paper shredding machine a few months ago. I think it is vegetable based and, as I anticipated, it was ideal for this purpose. The fans is working perfectly now. Seems faster too, and it's really very quiet now.
Thanks for your help.
It sounds like you really have your act together. Thank you for the detailed update and have a great day.
The nut threads are reversed so that the direction of rotation doesn't loosen the nut.
@@SKYGUY1 That is correct. Thanks Terry.
Awesome that would of made a great UA-cam video here also good job think about video it if you ever do something that brilliant again
😂
Thank you for this! My father died aged 56, so I don’t have anyone to teach me this stuff! Hopefully I’ll soon be the handiest Mum in town!
Hello domrocks, So sorry to hear about your father. I understand because I lost mine at age 15. I am glad out video helped and thank you for visiting. Please subscribe to our channel if you have not already. Have a great day.
@@DIYwithWayne Mine's dying, and I'm 15
@@DIYwithWayne this is sad but also strangely wholesome. Thanks for the ongoing fatherly advice. I’m subscribing, please keep helping people learn some DIY howto from somebody who seems like a good guy. 👍🏻
Hello Justin, Sorry to hear about your father. Believe me I know the pain of losing someone. I wish you peace. I missed your comment earlier or I would have replied sooner.
Hello Brian, Thank you for the kind comment. I do plan to keep doing videos and helping when I can.
I had to go back to the dumpster to retrieve the Holmes Blizzard I had thrown away. Tried your fix and it worked. However, I had to use WD-40 as that's all I had. I will buy oil and do it right. Thank you sir!
Thank you for the kind comment and for visiting, have a great day.
Oh man I’m so glad 😌 found this video. It’s very thrown away dozens of fans over the years when all I needed was a dollar of sewing machine oil!
Glad I could help! Thank you for the kind comment and for visiting, have a great day.
I have a $20 quart of sewing machine oil I bought for my Brother vintage industrial sewing machine. Yay, it should last me the rest of my life so I can fix all the fans that will no doubt need fixing. Thanks for this comment. Cool 😎
I expect it will. Thank you for visiting.
I think you will succeed because you come across very honest with all American goodness that is a rarity these days.
Thank you for your extremely kind comment. I enjoy helping people, and find it very rewarding when I receive positive feedback.
When I heard his accent I knew I found the right video. Thanks!
LOL! 😆 Thank you for visiting and have a great day.
Right...Me too!
As a budding mechanic, I give this video a thumbs up! It's informative, easy to understand, and gets straight to the point.
Thank you for the kind comment and for visiting, have a great day.
I had my fan forever and all of a sudden decided to stop working. I'll have to try your suggestion.
Thank you so much 🙂
I just spent ten minutes and a couple of drops of oil and got an old fan going smoothly and nicely again. You probably saved me $40 and a trip to the hardware store. Thank you again sir !!!
Fantastic! That's what this channel is all about. We want you to be able to do things yourself to save you money. Thank you for the kind comment and for visiting, have a great day.
Depending on the age, the fan may be better than what you would get for that $40 today!
Bought a "cheap" box fan two months ago, that was $14 at Walmart a few years ago *and cheapest I found was $27!*
I wish I saw your video early so I won't throw away so many fan! I (know a fan didn't cost much to buy a new one, but we should protect the environment and leave a better earth for the our next generation! Thanks for your tutorial and happy new year!
Yes, you/re right we all need to help protect our world. Thank you for visiting and have a great day. Happy New Year.
Thank you Wayne! My wife wanted to throw out the fan but I figured there must be a simple fix. I grew up without a dad (and without much stuff to break or fix) so I'm learning all this as an adult!
I an very happy it worked for you. Keep learning and have a great day.
maybe throw your wife out instead❤❤❤❤
Just fixed the fan for my mom-in-law; it would not turn at all. I blew the dust off, unscrewed all but one of the cover screws (it was seized); swung the cover to the side, did not move the motor assembly at all, but placed a couple of drops of Singer motor oil on the main shaft. Worked like a charm and was done in 10 minutes. Thanks so much!!
You are very welcome and thank you for visiting, have a great day.
Dude! Fiddled for 2 hours changing the capacitor in my extractor hood fan. Fan had delayed and random starting. It didn't help! Almost gave up then wondered if it was mechanical and came across this video. Fiddled about getting to the fan and it was greased up so I cleaned and oiled like in the video. It's working! You saved me at least temporarily £450 English pounds. Thank you!
Glad I could help. Thank you for the kind comment and for visiting, have a great day.
My fan was slow to start just now. I applied your method and now it's back running like I just copped it 👍🏾
Good to hear
My wife and I have a fan that we use DAILY and about 6 months back the motor went on it so we took it to a repair shop. The guy charged us like 12 $ to change out the motor. We brought it home and it ran fine for a few weeks. Then one day it started to do the "slow down" thing where it would really slowly and sometimes bind up and stop. I was pretty angry because we had JUST had it fixed. I went onto UA-cam and entered the problem into the search box and BOOM I found your video!! I did exactly as you instructed and when I took off fan blades the post of the motor would hardly move at all. I added a couple drops of household oil and YAY !!! The fan works like new!! Thanks a bunch, here s your like!!!
Thanks Shaun for your wonderful comment and taking the time to post it. We really appreciate the positive feedback. We also are happy that we were able to help! Have a great day!
I revived a 40-year-old 120VAC powerful Black and Decker Drill by lubricating the bearings this way.
Now I gotta try the three fans my neighbors put in the trash to the curb, and I grabbed them, in the night!!!
They put a snow blower to the curb a few years ago, because the drive belt kept falling off, a few UA-cam videos like this one later - and I knew where to place a $0.10 Nut to fix that; then a new gear for the starter motor's solenoid (teeth all busted) for $20, and a replacement $5.00 brand specialty Allen screw to re-secure the Starter Motor, (why the solenoid gear teeth broke) changed the oil, cleaned the spark plug/gaped it,; new gas: running/working like a champion and sold it for $450!!!
Another neighbor put a $150 scroll-saw to the curb, a UA-cam video later, bought a $5.00 transistor, replaced the broken-off from the circuit board one, reinforced it from vibration effects - working!
A little common sense and TLc goes a long ways!
You are doing very well. Maybe you should start your own UA-cam Channel. Thank you for visiting and have a great day.
Another satisfied customer. Last year thought the slow start was due to a faulty on/off switch. Tried spray electrical terminal cleaner with no improvements. This year the blade would not even start turning slowly. Your "oil the bearing" tip fixed the fan. Thank you!
You are very welcome and thank you for visiting, have a great day.
My fan was slow to start up with and was making noise during the speed up time. With your video and knowledge, I now have completely fine running fan again. Thank you . I used the hair trimmer oil that came with the machine.
Glad I could help. Thank you for the kind comment and for visiting, have a great day.
I have found this the answer to my slow fan and will try this. I have a 40cm floor fan blades just began to not start spinning. I will get some oil Singer Sewing Machine Oil and work on it.
I am a retired single lady and love to learn how to fix things.
Thank you once again kind Sir.
Robyn
Australia
Good luck with your project and have a great day.
Have a small expensive heat circulator fan that was experiencing same slow start problems. Took it a part and it’s working so much better after a few drops of oil. Thanks to your video, it’s as good as new.
Happy to help. Thank you for the kind comment and for visiting, have a great day.
Great video, this is exactly the problem my small desk fan had after I air dusted it today. Opened it up, wiped out the dust and gunk and got slow spinning fan blades. My larger fan that died on me a while ago might have the same issue, I just never found the time. Might have two fans back thanks to you! Tracking down where to get machine oil now!
Good luck with your project and have a great day.
Thank you, sir. Just fixed my fan which was taking ages to get started. Saved myself 30 quid 😊
Glad I could help. Thank you for the kind comment and for visiting, have a great day.
I really appreciate the video. I had the same issue - spinning/starting very slow. I put oil into front and back bearings of my Hampton Bay FT30 and now it runs as new. Thank you again sir.
You are very welcome and thank you for visiting, have a great day.
Thank you! You saved a maybe 70 year old beautiful fan from either never being used again or thrown away. Now it works better than I ever remember it working.
Glad to help! Thank you for your nice comment and for visiting our channel. We hope you have a great day.
Just did this to fix my desk fan that is 13 years old. Worked like a charm! Thanks for the help!
Glad I could help. Thank you for the kind comment and for visiting, have a great day.
You sir just saved me from having to buy a brand new fan! It worked like a charm! Thank you all the way from Europe.
Glad I could help! Thank you for your nice comment. We appreciate the pleasant feedback. If you would consider liking and subscribing to our channel, it will make it easier to find our videos and help us grow our channel. The main goal of our channel is to help save people money. Knowing we accomplished our goal made our day. Hope you have a great day!
Since I was a kid I have loved tinkering with things that worked and didn't work. Even now as an adult I will grab things out of people's trash on the side of the road if it is something that can possibly be fixed...not that I need it, I just like the challenge of trying to fix it.
Thanks for this. Subbed right away. Jesus bless.
You are so welcome, I'm a tinkerer too! Thank you for the kind comment and for visiting, have a great day.
thank you so much! you would honestly be shocked how little bit of knowledge is on youtube about this, how to fix a fan. Honestly, yours may be one of a few on the whole site. And all the others were long, complicated and quite ridiculous. Yours was to the point, easy and simple and you saved me $60 on another fan. I bought this fan last summer, used it for maybe a month, and not even that often when i did have it on. Took it back out again last week and it took a few minutes to start a slow spin. The other video i watched had me take apart the whole motor, check the thermal conductor, Finding your video, i did exactly what you said and voila! it works perfect!
Thank you for the kind comment and for visiting, have a great day.
Thanks, saved me the costs of buying a new one. Your instruction was spot on.
Glad I could help. Thank you for the kind comment and for visiting, have a great day.
Well explained and simple as someone who repairs and restores fans from the 60’s through the early 90’s I’ve started also doing this with my modern daily driver fans that I’m not collecting. You’d be amazed at how little lubrication most modern fans leave from the factory with and once they get proper service like this they perform and last much longer. My go to oil is the 3 in 1 oil in the blue label bottle for fans and zoom spout I’ve gotten great results from using these oils and a bottle will last for many years because like you said it doesn’t take much. I highly recommend doing this simple maintenance once or twice per year depending upon the frequency you use the fans. Usually I clean the guards, blow out the motor and wipe down the blades monthly to keep peek performance because dust drastically reduces the airflow.
Thank you for the kind comment and the great suggestions. Thank you for visiting and have a great day.
Thanks Sooooo much ! My floor fan has been waiting several months for me to give it some first aid. Now watching your informative teaching and demonstrating, i finally got up the energy to take it apart ...clean,...lubricate ... test it....then put it all back together. Perfection ! i thought i was supposed to use a grease type lube, so now that's all done !
Glad it helped! Thank you for visiting and have a great day.
I sprayed some liquid wrench through a straw without taking off the cover. The fan works much better now. Hard to believe it was such an easy fix. And yes, it is now August!
Glad it helped. Thanks for taking the time to post a comment. Please consider liking and subscribing to our channel.
Thank you for this video. I made the rookie mistake of cleaning a couple of fans with a steam cleaner. Upon reassembling, one of the motors would barely move. The fan was almost in the dumpster when I came across your video. I had some hair clipper oil in the house so I followed your directions and the fan came back to life like magic. Thanks again.
Glad it helped! Thank you for the kind comment and for visiting, have a great day.
Thanks!! Just finished taking blades off to clean the fan well, reassembled and realized this fan started to be slow to start the last time I used it. I was going to pitch it, but with your help, I now have a fan that looks new and runs like new.
Glad I could help. Thank you for the kind comment and for visiting, have a great day.
Great video Dwayne.
Glad you enjoyed it! Thank you for the kind comment and for visiting, have a great day.
Thank you Wayne! You just saved me $65. Perfect video. Informative, you gave two great examples of issues and you showed us all, step by step how to resolve. This is why I love UA-cam!
Good morning Filmguy5, Thank you so much for your wonderfully positive comments. It is for viewers like you that we continue to make our videos. We really are passionate about helping you save money by doing things yourself. Please consider liking and subscribing to our channel. When you subscribe it helps us grow our channel and makes it easier for you to find our videos. Thanks again and have a great day.
Ok so all I need is machine oil and not WWD 40. Thanks
Thank you! This fixed my fan, I had known about the front of the axle or whatever needing lubrication. I just didn't realize the back was also in need. My fan is back like new again. Thnx homie
You are very welcome and thank you for visiting, have a great day.
Thank you! I have a few "broke" fans around the house I couldn't bear to throw away and now I'm going to give this try!
Let us know how it worked for you! Thank you for visiting and have a great day.
I used a 3 in 1 oil like you said instead of WD40 and saved 2 remote controlled Nortex floor fans headed for Goodwill literally on the front porch! My hubby wanted to just buy 2 new fans bc he was too tired to watch UA-cam videos like I asked so I thought maybe I could do it myself but was a little intimidated bc he always takes care of fixing everything. I was so proud of myself it worked and he was shocked as well bc machinery is out of my comfort zone! You just saved us $$$! The blades are super fast now! I read somewhere that WD40 will attract dirt and dust over time so I’m glad I used the 3 in 1 oil! Thanks a lot for passing on your knowledge!
Strong work Mama Birdie! You have every right to feel proud. We are so glad you found our video helpful. Thank you for taking the time to post your nice comment. Please consider liking and subscribing to our channel. By subscribing you will find our other videos much easier to locate and also help grow our channel. Thanks again and have a great day!
Thank you Sir your video saved me from having to go get another one.
Glad I could help. Thank you for visiting and have a great day.
I had a fan out of commission for over a year and devices to watch a tutorial on how ti fix. Watched your video then plugged it in. Go figure it’s working now! 😂 But now I have new knowledge for the future, thank you! Thumbs up. 👍
It may be running but a little oil will help. Thank you for visiting and have a great day.
@@DIYwithWayne Happy 4th my friend!
Every fan owner should see this! Thank you Wayne! 👍
Thank you for the kind words. If you have not, please subscribe to my channel. Wayne
@@DIYwithWayne It looked like you had some interesting content and I did subscribe!
I have a much larger table fan that takes times to start sometimes. I opened it up, it looked a bit different inside and I nearly yanked the coil connections off; thankfully I didn't! Lubricated what I could (with an oil that came with a shaver). The blade isn't noticeably much looser but so far it's starting right away after turning it on. I have a question that I'm asking separately so that others have a higher chance of reading your answer.
Thank you so much. I watched another video where he put oil on the shaft, but not on the back bearing. It worked for a day or so and then stopped again. But after using your method of oiling both front and back, it works perfectly and spins so freely. Thanks again, and have a great day.
You are very welcome and thank you for visiting, have a great day.
You just saved my life on a hot summer day sir.
Thank you for the kind comment and for visiting, have a great day.
I had the same problem with my bathroom exhaust fan. I Initially oiled the shaft and front bearings and it didn't do anything much. I then searched UA-cam and came across this video and noticed the motor structure was almost identical to your fans, so I decided to take the fan apart and placed oil to the rear bearing like you did in this video and 'VOILA' it worked a treat and now runs like new. Thank you Sir for uploading this great educational video
I'm so glad you found this video useful. Thank you for visiting and leaving your kind comment. I hope you will continue to visit my site. Hope you have a great day.
Thank you 👌🏻
Glad I could help. Thank you for the kind comment and for visiting, have a great day.
Thank you Wayne. I'll go try. For me the most important is not the cost of replacing a fan, especially after it's been used for a decade, but why throw away something when it can be fixed easily. It's better for the planet. I've subscribed
Thanks for subscribing to our channel. Have a great day.
Thanks Wayne, this was super helpful and I’m glad it was the first thing that came up when I looked up fan slow to start because it answered my question and allowed me to solve my problem immediately. Great video!
Glad it helped Thank you for the kind comment and for visiting, have a great day.
Thanks a lot for the video. 3 years ago I bought a window fan with 3 fans in the housing. Last year it had the problem you described. This year it did it and I figured it might be a lubrication problem. So today I was planning to fix it so a online search led me to your video. watched it, worked on the fan and voila! Works like a charm.
You're welcome! Thank you for the kind comment and for visiting, have a great day.
Thank you so much. I nearly scrapped two fans. Your instructions were simple, logical and easy to follow. Cheers!
You're welcome! Our channel is all about helping save you money. We appreciate you taking the time to comment on our video. Positive comments like yours mean a lot. Please consider liking and subscribing to our channel. Subscribing makes it easier for you to find our videos and helps us grow our channel.
@@DIYwithWayne Thank you for responding. You just got yourself a subscriber and a cheerleader, brother. 👍
Thank you so much. We appreciate your support!
Thank you! My fan need is so great and I've been without my main one for 3 days. Found your video and was able to fix the issue likkity split! Also fixed another one I've had on a shelf for about 1 year. Couldn't part with it because it was such a powerful fan but so noisy and wobbly. Added the oil in all the places and now it's a kitchen cooling unit. Thanks again for the simple instruction!
You're welcome! Thank you for the kind comment and for visiting, have a great day.
Awesome, thank you so much, I couldn't figure out how to remove the blades. I appreciate you and love your accent!
You are very welcome. We hope you will consider liking and subscribing to our channel. Subscribing makes it easier to find our videos and helps us grow our channel. Thanks again for your comment. Have a great day!
That's exactly y I watched it I can't get the dang blades off hopefully now I know ...thnku and I will sub to ur channel...
My fan started to 'die' and I just googled for a fix. This fixed it right up! It was squeaking loudly and wouldn't start right away. A little bit of oil that I use for my electric razor and it works like brand new. Thank you!
Glad I could help. Thank you for visiting and taking the time to leave a nice comment. Have a great day.
I agree with you when your fan is not free running,or not turning if you blow on it,it needs servicing.
What i don't agree with,is how you do it.just add a drop of oil near the bearing is a tempory solution at best.The manucaturers don't want their fans to be returned to them for servicing just after a few monts of operation.So they buid their motors to be lubricated for a long time.
It should last many years.This is done by adding a peace of fabric between the bearing and the support braket,it is held in place by a thin locking washer.This fabric act as a sponge for the oil.After many years,it will drie up,it needs to be replenish.This is where you should put your oil.Sometimes it has harden from the heat so you let soak in oil solvent for a day.
Let it dry,add a few drops of oil,let the excess run off on a rag .This is done at both ends.
It would be wise to clean the motor shaft with oil solvent as well.Warning,when you reassemble your motor do not over tighten its asembling screws,junst a bit of tention,ck it now if it free runs when you blow on it.
Good luck.
Bye.
Lucien
If your motor don't have this fabric sponge ,you can make one using a piece of ribbon felt and install it yourself .Get the ribbon felt make 2 holes in it with a slow running drill ,cut some pieces about half inch length ,let them soak in oil,install them on each side of the motor ,I did this on my humidifier motor now,it won't wake me up in the middle of the night.
Bye.
Lucien
Ah Hah! I figured out how to lubricate the front, sneaking in behind the blade with an extension tube on some silicon oil. But! I couldn't understand how to get to that rear bearing! Plus, I did use WD-40, thinking "cleaning" instead of lubrication. Thank you very much for this video! The fan is a cheap Mainstay, but it's got a lot of air movement, and it's super quiet on the low speed. This saves the fan instead of having to buy yet another one! Thank you again!
You are very welcome and thank you for visiting, have a great day.
EXACTLY the info I was looking for! Thank you so much! 🙏
You are very welcome and thank you for visiting, have a great day.
Thank you so much, I was able to fix our fan, and now it works like new! Thank you from Australia!
Glad I could help. Thank you for the kind comment and for visiting, have a great day.
Thank you! Managed to fix my floor fan doing exactly this. Appreciate it!
You are very welcome. Thanks for the comment and please subscribe to our channel if you have not. Have a great day.
This is exactly the sign my small table fan is exhibiting. Now I know how to fix it instead of having to buy another and adding to more landfill waste. Thank you.
Glad I could help. Thank you for the kind comment and for visiting, have a great day.
hidden gem, thank you
You are welcome. We are happy to help. Thank you for visiting and if you have not, please subscribe to our channel.
Excellent! I had the same problem for months and I did exactly what you say here. It worked in a minute. Thank you.
Glad I could help. Thank you for the kind comment and for visiting, have a great day.
Thank you sir you saved me from buying a new fan.
Glad I could help! Thank you for taking the time to post a comment. Comments like yours are good incentive to continue to make our videos. Helping you save money is one of our goals! Please consider liking and subscribing to our channel. Subscribing will make finding our videos easier. Have a great day!
I used to take broken electric fans to repair shops. The time you have to take it there, wait for a couple of days to get it back, then make a payment for it now all sounds ridiculous compared to this fix. Thank you very much for the wonderful and simple explanation. I've subscribed to your channel, sir.
So glad you found this video helpful. My channel is all about teaching you how to do things yourself to save you money. I like knowing that it is working. Thanks for subscribing and leaving your nice comment. Have a great day.
This is a great video!
FANtastic! Saved my 30 year old oscillating fan which will get me thru this hot weather. Thanks Wayne!
Glad to help! Thank you for the kind comment and for visiting, have a great day.
Thanks 🙏 mine didn’t power at all either
I am glad it helped. Thanks for visiting and have a great day.
I would not give up on this fan just to be defiant against my wife on buying a new one. It actually worked. She is going to be sooo mad now. I cant wait to smile when she sees it now. Lol thanks! Great video over all.
I'm glad I could help LOL. Maybe she can buy something else. Thanks for visiting and have a great day.
I went awww when he said u can’t use wd-40
Lol I went ooooops
Yeah I heard wd40 will actually make it worse. I did the same thing :/
@@poetjake this is because WD 40 is a detergent oil and it will wash off with time
Found a clean, not even dusty floor fan worth about $100 next to the dumpster...no spin...watched you..works now. Thanks so much.
Nik, that's quite a score. Good for you. Thank you for visiting and have a great day.
Awesome video, my fan was slow to start and have done everything in your video and it's working like new! Thank you for the great video!
Thanks for this-I watched another video that made it seem like I needed to take apart the entire fan to clean the bearings, but your method was much easier and it worked like a dream!!
Glad it helped! Thank you for the kind comment and for visiting, have a great day.
So glad I stumbled upon your channel. I bought an old house with lots of old stuff that needs fixing, I would much rather fix older items that were high quality than replace.
Good for you, doing things for yourself! We wish you good luck with all your projects. Thank you for the kind comment and for visiting, have a great day.
Thank you! Fixed my fan today! Had to pull the motor casing apart to get to the rear bearing (vornado). Good fun, and this helps me keep things going for longer and avoid throwing stuff out when it's fixable :) thanks from Australia!
Glad it helped! Good work! Thank you for visiting and have a great day.
OMG!!!! I always believed it was dirt and cleaning it would take a lot of effort!! I just add oil to mine and it was like magic!!! Thanks for this!!!!!
You are very welcome. Thank you for visiting and have a great day.
Thank you so much, my fan literally stopped working today, did like you said. Just a few drops and it's working just fine. Thank you for saving me a trip to the repair store.
You are very welcome and thank you for visiting, have a great day.
I Just picked a little fan my neighbors put to the curb with their trash; when I plugged it it spun very very slow so took the fan off and back cover to have a look inside... It was like new, no dirt or anything but the shaft felt like it didn't spin as smooth as it should so did a quick Google search and came straight to this video. When you said it just needed a drop of lube I was so surprised I paused the video and went straight to the garage to get my PL-100. I lubed the shaft and the oscillating mechanism then tested again... now it's perfect I feel like I should give it back to my neighbors.
Glad you found this video helpful, that means a lot to me. Thank you for the kind comment and for visiting, have a great day.
This video just saved me a couple of bucks. Hats off to you, sir!
Glad I could help. Thank you for the kind comment and for visiting, have a great day.
At exactly 1:27AM today (Mon,19th of Dec, 2022), I was able to fix my stiff fan blades in my hostel. 🥳
Normally, I'd have had it checked by a technician the next day and they'd have charged me so much money for such little problem. 😭
I just needed to oil the spinning thingy in the middle of the motor. I did and voilà! It works just fine now. 😃
Here's me saying thank you so much Sir. Really appreciate the video. 🙇🏾♀️
You are very welcome. I am glad it worked for you. Thank you for visiting and have a great day.
Thank you. I was about to throw out my 2, slow fans until your video. I followed your instructions and both fans run like new again!
Great job! Thank you for the kind comment and for visiting, have a great day.
Thank you so much! I’m a tech in electronics but I had main practice in amplifiers speakers and tvs but recently with the heat and all I’ve been getting a lot of fans in and I was a bit lost! Very informative and to the point!
Glad I could help! Thank you for the kind comment and for visiting, have a great day.
Just did as you said and now my fan works like it is brand new! Thank you very much,
You are very welcome and thank you for visiting, have a great day.
Thank you for this straightforward how to video without the unnecessary rambling on that others feel the need to include. Very much appreciated and helpful!! Happy New Year 2025!!
Glad it was helpful! Thank you for visiting and have a great day.
I did just what he taught and it was so easy to understand a clear simple explanation 10 out of 10 and a big thank you some of us really appreciate your video.
You are very welcome and thank you for visiting, have a great day.
I just got two pedestal fans to work again thanks to you! Great video.
You are very welcome and thank you for visiting, have a great day.
Thank you for the video. Detailed, straight to the point, no BS. Helped me fix my Stand fan. Best wishes from Egypt. :)
You are very welcome and thank you for visiting, have a great day.
Thanks tons!
My dehydrator fan stopped spinning and I was in panic mode for 15 or so minutes.
Used some mineral oil and it's working perfectly now.
Fantastic! Thank you for visiting and have a great day.
Thanks Wayne. I appreciate how you had the disassembly done in advance and left just enough for everyone to see how to get it apart. I enjoyed listening to you. Made me homesick to go back to East Tennessee and Western NC. One of my best friends lives on Lake Norman... Dave Austin.
Hello Terry, You are very welcome. I also live on Lake Norman. Thank you for visiting and have a great day.
Thanks! So happy I could keep my fan from the dump and not support companies producing cheap stuff.
Thank you for the kind comment and for visiting, have a great day.
Thanks for sharing your expertise here! You saved me from having to purchase another wood stove fan with this simple, easy fix.
Glad I could help! Thank you for the kind comment and for visiting, have a great day.
Wayne! YOU are amazing.. Thank you !! and with your demonstration, I knew I could lubricate this fan.. I did so and it is just fine now. I thought there was something wrong with the motor.! '😊🌹
You are very welcome and thank you for visiting, have a great day.
Saves our precious earth too! Thank you for your service my friend.
You are very welcome and thank you for visiting, have a great day.
Thanks so much, Wayne! all the way from Spain. Our fan is now good as new.
Thank you for the kind comment and for visiting, have a great day.
Thank u much! I have a dynatrap and the fan stopped, only had it one month. Oil did work not for sure if I put enough cause it was hard to get to. It's working and time will tell lol. The fan is running a lot faster now. Thanks again for the video!
If it is running faster you did good. Sometimes it takes a little while for the oil to work it's way into the bearing. Thank you for visiting and have a great day.
Great tips. I’m 43 and fixed my first small fan. Thanks sir 👍🏼
That's great. Thank you for visiting and have a great day.
Worked perfectly! First I thought the motor was going and the 3 in 1 oil did the trick. Thanks!
Great to hear! Thank you for the kind comment and for visiting, have a great day.
Thankyou, I have a really good fan that started going really slow and this will save its life!
You are very welcome and thank you for visiting, have a great day.
Thanks SO much! I have a very different type of fan, and your instructions worked PERFECTLY! Thanks so much for posting this!
Glad it helped! Thank you for visiting and have a great day.
@@DIYwithWayne You too!!
what started out as a home school project for my 7 year old to learn about simple motors turned into an easier fix than anticipated! still learned something useful! thank you!
That is awesome! What a good mom. Thank you for the kind comment and for visiting, have a great day.
Thank you! I love being able to fix something, saving myself money, and keeping something out of the landfill.
You are so welcome! Thank you for the kind comment and for visiting, have a great day.
My fan is slow to start, not as bad as the one in the video (yet) but I'd rather fix it before it gets as bad. I want to save money, and I've had the fan for a long time, so I've grown attached to it. It's lived in a lot of places with me. Thank you for the very detailed video showing me how to fix this issue.
You are very welcome and thank you for visiting, have a great day.
This video helped me fix my box fan that I was ready to throw out. Thank you!
Glad I could help Thank you for visiting and have a great day.