⚠️ God has said in the Quran: 🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 ) 🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 ) 🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 ) 🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 ) 🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 ) ⚠️ Quran
You just CAN'T be serious about this! 😳 You MUST be kidding us! NEVER EVER stick a capacitor of unknown condition into a power outlet like this! If it's bad, very unpleasant things may happen, ranging from a power shortcut to the cap exploding right into your face. And you should NEVER discharge a capacitor by just shorting its wires, as this may damage it permanently. Always use a voltage meter to test and only discharge with a high ohm resistor. Keep your fingers as far away from the wire ends as possible. The testing wires of a meter are thoroughly isolated for a reason. I hope you have a good life insurance. 🙄 By the way, that spark test may look like fun, but it tells you nothing about the real condition of the cap. If it had already degraded from 4uF to 2 uF, it will still produce a spark, but may already be too weak to drive the motor propetly.
I'm starting to think they run down and the fan runs slower with an old capacitor. I tried connecting several old capacitors one at a time to test the fan speed with each one. Some were slower than others and I even doubled using two old capacitors and the fan worked well and worked beter than with each capacitor separately! I checked the lubrication before working with the capacitors, of course.
You can buy a 20,000 ohm resister to safely discharge caps. And it wont l damage the cap. For those who dont know what youre doing or what a cap does. Once a cap is charged it can hold that charge indefinitely. If you grab it and touch the terminals or wires best case scenario youll get a tingle. Depending on the voltage and mf youll be lucky if you only piss yourself.
The caps found in the flash circuit of disposable cameras are small but have a good punch to them. Ive accidentally rigged them up inside of the handle of my mag lights connecting to the main power button. Remove the rubber and secure the lead to the plastic part of the switch with a tiny screw or glue. When the button is pushed to turn the light on it waill shock the hell out of who ever pushed it. They are fun to install inside your remotes too.
Most home owners don't have multimeters, and this videos displays a testing method that doesn't require investing in equipment that may infrequently used.
Great, just the information I was looking for! Short and simple instructions. Thanks!
⚠️ God has said in the Quran:
🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 )
🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 )
🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 )
🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 )
🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 )
⚠️ Quran
😂😂😂😂oh hell naw get me outta here
Thanks, simple & effective
Thanks a lot.
You can do it with an OHM meter. You can see the charge and discharge by watching the needle on the meter..
Must’ve an analog meter
I'm not gonna do this
capacitor +/-5% we call it Tolerence not mistake as you said
What are you using to charge capacity
A strip outlet
Bro its a powerbar
we invented multimeters over 100years ago.
Do not touch one wire to your thigh & the other to your winky. Or you will get a tinkle from your winky.
To meet jesus 😂
250 balls
U must be kidding, that’s so dangerous, never ever do something like that, how can u make a video about it?!
Try 220 volts😂
English
I would NEVER do anything like this EVER
You just CAN'T be serious about this! 😳 You MUST be kidding us! NEVER EVER stick a capacitor of unknown condition into a power outlet like this! If it's bad, very unpleasant things may happen, ranging from a power shortcut to the cap exploding right into your face. And you should NEVER discharge a capacitor by just shorting its wires, as this may damage it permanently. Always use a voltage meter to test and only discharge with a high ohm resistor. Keep your fingers as far away from the wire ends as possible. The testing wires of a meter are thoroughly isolated for a reason. I hope you have a good life insurance. 🙄 By the way, that spark test may look like fun, but it tells you nothing about the real condition of the cap. If it had already degraded from 4uF to 2 uF, it will still produce a spark, but may already be too weak to drive the motor propetly.
It would be better if you use a bulb to check if it is charged
I'm starting to think they run down and the fan runs slower with an old capacitor. I tried connecting several old capacitors one at a time to test the fan speed with each one. Some were slower than others and I even doubled using two old capacitors and the fan worked well and worked beter than with each capacitor separately! I checked the lubrication before working with the capacitors, of course.
You can buy a 20,000 ohm resister to safely discharge caps. And it wont l damage the cap. For those who dont know what youre doing or what a cap does. Once a cap is charged it can hold that charge indefinitely. If you grab it and touch the terminals or wires best case scenario youll get a tingle. Depending on the voltage and mf youll be lucky if you only piss yourself.
The caps found in the flash circuit of disposable cameras are small but have a good punch to them. Ive accidentally rigged them up inside of the handle of my mag lights connecting to the main power button. Remove the rubber and secure the lead to the plastic part of the switch with a tiny screw or glue. When the button is pushed to turn the light on it waill shock the hell out of who ever pushed it. They are fun to install inside your remotes too.
I have same one but it has 2 red wires and my fan is not even 3 months old 😢
❤😂 trying it oo
Pete and Repeat
Ou trouver la pièce ?
Merci
Can't u just use a metre? 😂
Most home owners don't have multimeters, and this videos displays a testing method that doesn't require investing in equipment that may infrequently used.
Its giving the viewers the easy way, make your own video
Touch one to your lengua other to youe ojito!!!