So many Curious viewers! The most common question seems to be "Great system, but can you get it serviced anywhere in the world?" and the answer is definitely yes! The diesel engine is a fairly simple marinized Kubota engine, so parts should be readily available and any diesel mechanic worth their salt should be able to fix anything Jason can't. The electric motor is also super simple, and HH techs will be able to remotely log in to the system from anywhere in the world for troubleshooting and diagnostics. Hope that satisfies your "curiosity"! Curious Minion
Also look into a 4 blade prop vs. a 3 blade. 4blade require more torque, but that's what electric motors do thus 4blade props are more efficient and more responsive than three.
@@yewtuber Touching a million amps at 1 volt probably won't kill you because it's not enough voltage to break down skin and make it conduct. It takes more than say 50 volts to make skin conduct, which is why low voltage systems are under 50 volts. Also it turns out that water, even seawater are NOT very conductive, so the risk of electrocution from water + electricity is not a great as people think.
As an engineer with a career in automation, I'm impressed, and also recognize that you two will really need to learn these systems. I'm confident you can learn to troubleshoot and repair, but it sounds like it's going to be a whole new class of debug from what you had before.
But Wynns have a very intimate understanding of the entire system. I've been critical of Jason's lack of mechanical knowledge. That being said, he has self educated about not just mechanics but also system design.
The diesel is very uncomplicated, and the electric motor itself is also very simple. Techs will be able to access the system via WiFi, so the techs at HH will be able to help troubleshoot from anywhere in the world. Curious Minion
Jason has had a Supreme learning curve from his day of Rving. I had doubts for this duo as they started there lessons on basic boating and sailing. To the Wynns, " You have done well Pilgram" Much respect... and YES you are building the vessel of my dreams of 25 years ago.
The electronics and controllers will be the problem area. You're right, the diesel and electric motors are simple. But the electronic and software "glue" can make it all go wrong-- and unless you have access to the code to debug, it will be a challenge.
When the drive belt from the prop shaft to the motor/generator fails you will have to disconnect the prop shaft flex coupling and push the shaft aft to replace the drive belt. While this is not that difficult it could be easier. You could put a spare belt or two around the prop shaft during install and zip tie them into a safe position clear of any moving parts. Then when the belt fails just slide a new one forward and onto the pulleys. You will only need to slacken the belt tensioner and then retighten it with no need to disconnect the prop shaft. This could be a plus if the belt fails at sea under difficult conditions. Thanks for showing us your beautiful new boat. Happy sailing.
@jackwickman2403 Good eye and nice catch. And yes, HH delivers the boat with a spare zip tied exactly as you described. You get the gold star this week! Curious Minion
@@armslength2618 Belts are highly reliable in power levels and applications such as this one. We agree they're not suitable for use everywhere. (Lots of engines use timing belts, for info. Some motorcycles use belts as a final drive between the gearbox and rear wheel. Google: "What motorcycles have belts?")
Sixth way to propell: perpetual motion configuration. Run one motor off the battery bank. Put the other motor into regen mode, and recharge the batteries. No wind? No fuel? No problem!! ;-) 😉😉
Hey - Get them to put two extra belts on each motor and zip tie them out of the way now as they are probably very difficult to replace the belts later. That way you just cut off old belt and slip new belt in place. I bet it is very hard to get a new belt around the prop shaft once mounted in engine room.
Most of the information went way over my head, but redundancy really struck me. This, coming from someone who has 5 different ways to make coffee in her trailer. 😊 AND I never have to worry about getting stuck in the middle of the ocean like you two do. Good peace of mind. ❤️❤️
wow, looks like a great system, 1 thing not mentioned is that most trains since 1913 are all diesel-electric, As early as 1913, an experimental 60-horsepower diesel-electric railcar appeared in Sweden. About 30 cars of this type, but with more powerful, 150-horsepower engines, soon went into service in Sweden, Denmark, France, and Tunisia.
So!.... I was REALLY concerned about how much solar you have was really NEVER going to get you to a FULL state in your huge battery bank..... NOW I get it, with this system, you'll be sailing almost forever with VERY little to ZERO use of any fossil fuels whatsoever. This means, NO MORE carrying all those big HEAVY diesel cans when you go ashore, which ALSO means, NO need to even HAVE those big cans for your diesel storage. Man, what an IMPRESSIVE system! I'm SOOOOOO HAPPY for you and Nikki!!!!
That's a really impressive system Really efficient and at the same time built with kit that is easily worked on by a normal mechanic. Love the fact that the engine doesn't have electronics on it that can only be worked by a dealer.
The down side is what are you leaving on the table in terms of power and fuel efficiency but not going common rail. The software to diagnose those system , while proprietary is usually available somewhere for those willing to search.
True, but the pressure needed for the common rail system is high enough to amputate a finger if you don't know what you're doing when you service it. For owner service and repair & parts availability in remote areas, I'll take the simpler system & give up a little power. Especially when Nikki and Jason plan to rely on the electric motor as much as possible. Curious Minion
@@chrismulvey49 Common rail diesels use a high pressure pump (30k psi?) feeding a common rail (pipe) with solenoid operated injectors controlled by an ecu to spray the fuel into the cylinders. Direct injection diesels use a relatively low pressure mechanical pump/injector each fed by separate fuel lines, usually driven by the camshaft.
@@fredbugden3511 One problem with common rail diesels on blue water boat is their need for very clean diesel. So you need some installation (filters) to make sure that what you are feeding into the high pressure pump is best quality. One more system that needs maintenance, spare parts a.s.o. On a boat moved 95 % by the wind I don't see the advantage of having a common rail engine.
Same system as used on WWII submarines as there were called Diesel/Electrical Boats. A German sub was captured (U505), as it's batteries were "Flat", had no power thus have to surface and surrender. Did the same trick, as it was being towed by the Americans after capture, the props were spinning charging the battery's bring it back to life. It is now in a museum in Chicago..
That means it's not the same system. This system is a parallel hybrid where either or both the diesel or electric can move the boat independently. In that way it has 2 way failover redundancy. Any one system can fail and the boat can still move. If the sub could not move due to discharged batteries, then the sub was a serial hybrid where the combustion engine acted as a generator to charge the battery and the Diesel could not turn the prop directly. It's also possible the diesel had a problem or ran out of fuel and could not start.
@@LoanwordEggcorn It was kept down due to depth charges, batteries ran out, that was it. U505 was surrounded and had no were to go. The engines were started with compressed air. The WWII subs engines were NOT connected to the prop shaft, but to a generator which charged the batteries, OR powered the shaft motors directly. OR full motors or Full battery charge. The entire sub was controlled by "Maneuvering" a small room maned by 2-3 people that controlled the flow of current...Quite the setup. To me the similarity's were striking.
I had the same engine/transmission. Raises three questions. 1) Never would start without using glowplugs, even with outside temperature at 90F. That takes 50A for about 10s for each engine PLUS the starter motor load when turned over. 2) Could not stop without pulling manual decompression handle. Has this been replaced by using a solenoid? If so, is there still a manual decompress if solenoid fails? 3) Running transmission in 'N' wasn't recommended, had to be in 'R'. Ask questions about this!
To me, this is the perfect setup: harnessing the power of the sun and water flow for energy, storing it in batteries, and having diesel backup for when there isn’t enough sun. Quiet, eco-friendly sailing, with a little range extension of electric motors, powered by diesel engines when the battery array is running dry.
Wow, I think you really lucked out with the engineering talent at Hh. In a way, I think very talented engineers are attracted to challenging forward thinking projects, and that has happened here. At a legacy boat manufacturer, I suspect your talented engineer would be stifled by older engineers who just want to do it the “way they know works”. I am really excited to see all this tech come together.
The drive system looks cool. I love the idea of running quietly on the electric motor for 2 or 3 miles before hoisting sails or, vice versa, dropping sails and quietly entering the anchorage or marina. Also great for fast charging the big LiFePo4 battery bank from empty to full in 2 hours if necessary.
And the key thing is that all of the electrical energy used to motor can be recharged simply by sailing. So motoring becomes WIND POWERED. This is working in harmony with nature MUCH better than burning fossil fuels. In reality, most people with electric drive sailboats use the motor to get away from the dock/anchorage, raise the sails, then use the sails to recharge the battery for a while by hydrogenerating. After charging enough, the motor acting as a generator is disengaged while under sail. Coming back to dock or anchor, the electric drive is used to motor again. And battery can be recharged by solar, shore power, etc.
Somebody far wiser than me once said that “simplicity of operation is a result of far greater effort at the design stage” . I think the HH hybrid system is a perfect example of this approach. Great video as always 👍
I would say that is 100% true. I just wonder if the B&G interface craps the bed(they do), does everything still work or have a backup? Electronics are great until they do not work and modern electronics there is no "fixing" them, it is just 100% replacement.
I really like the fact that alongside the considerable amount of tech on this boat, at the centre of it is a fairly agricultural diesel that I could fix with a bag of spanners. And as a bonus its shaft-drive too. I've never really been a huge fan of common-rail or saildrives. Getting more interested in HH the more I see of them.
Jason looked like a kid who just woke up on Christmas morning and saw all the presents under the tree with his name on them! I will have to watch a few times just to understand it all. Looking forward to seeing it in action.
Lots of comments from folks who have not designed, built and sailed an electric boat for years. I have. My Pearson 36 had a similar 10kw brushless electric motor and in my opinion, the HH44 setup is sized right, practical and functional. Far superior compared with my DIY system. In short, I have no doubt that it will work & Jason, you are going to love this propulsion system!!! You have 2 generators on board. You have 2 engines and 2 motors - each capable of moving the boat on their own. I know of no other boat with such redundancy. Just one question: how to change the belt? I know it lasts a long time (mine went over a year with heavy usage). Must be a coupler you can disconnect to pull the belt off the shaft.
Good eye. HH delivers the boat with a spare belt already inside the loop & zip-tied out of harms' way. That lets you wait for controlled conditions to install another spare for the next time. Curious Minion
I love the design ethos of this HH. The engineering fundamentals kept simple & accessible with an elegant hybrid interface. Excited to see the testing etc. Great job HH, my fantasy yacht league ties you guys & Outremere as top choice!
Great video. To me, this is the perfect setup for a live aboard cruiser. You could literally just use the diesel very sparingly and use very little fuel. Quiet. Clean. But always there to get you away when required or to charge batteries for AC and other living comforts. And it is still a performance sailing machine. I love it.
I’ve been doing Building Automation for over 27 years and my concern is leading edge tech vs “bleeding edge” tech. There are many interconnected systems that concern me with how well they will hold up in a marine environment. But this is amazing stuff when it is working right. I sincerely hope it gives you decades of worry free service!
At least it's a simple bolt-on generator/motor that presumably can be isolated mechanically if it fails. And a simple gearbox for the engine using existing tech. I've seen variable pitch props driven electrically to optimise regen efficiency, which seems great but again prone to failure, potentially. And this parallel system wins hands down for redundancy IMO.
What impressed me is that they are repurposing a well established system used for years on river boats. Just looking at it, it looks simple. What is more ubiquitous than a Kubota diesel or a belt drive motor generator? They have some new software to perfect, but that can be updated wirelessly.
There's something really cool about the idea of sailing into some pristine remote anchorage, using only electric to maneuver while dropping the hook, and then recharging the batteries with solar. No loud diesels running, no stinky exhaust or fuel smells to detract from the quiet and fresh air. Will be hard to run totally off solar without turning off a lot of the luxury systems and sweating a little, but would be doable. You can really be quite self sustaining for a long time. Food becomes your limiting factor,.
I live a couple of miles from Braidbar Boats who feature in the magazine article you showed and regularly walk the dog along the canal past their yard. It's an ambition of mine to live on a canal boat, they are one of the top canal boat builders in the UK and I'd love to have them build a boat for us so I've looked into their hybrid system, and what was described here sounded very familiar, because Braidbar also use HybridMarine! One big advantage on a canal boat is engine efficiency - you size your engine, gearbox and prop for going against the tide on a fast flowing river with a gale force headwind but then spend 99% of the time pootling along a current less canal on a calm day. Putting the engine to so little effort means it runs really inefficiently, so adding the generator and working the engine hard means it's massively more efficient and you're using far more of the energy in the diesel fuel, stuffing it into the batteries and then, once fully charged, switching off the engine and using that energy for propulsion for far longer than you had the engine on for. On canal boats in the UK you can get enough power from solar for domestic supplies (though not necessarily in the winter) but the sun isn't ever really bright enough and there isn't enough space for panels to generate enough for propulsion unfortunately. Braidbar also provide a remote controller so you don't even to be on board to move the boat, e.g. if you're single handed and going through a lock - David (Cruising the Cut) did a video about it a while back. Wow! Suddenly this video went from China to so close to home!!! Top stuff!
Hello, Nikki and Jason! Your timing in the adoption of this particular hybrid system is perfect. The system is cutting edge, but mature. James and his team have brought an amazing level of sophistication and refinement to the final product, always with attention to its ease of use by Sailors. Stepping away from things technical, the bottom line will be a whole new level in your quality of life on the water.. Well done!
When thinking about maintenance, my biggest concern is the control systems. There's still the prop, belts, transmission connections, but those will be relatively easy to diagnose and fix. While the electronics on the control system, the wiring, screens, etc are the things that will be hard to just diagnose, let alone repair, while at sea.
First a disclaimer : I am NOT a sailor, nor have any general interest in the lifestyle, but have been watching your videos because, quite frankly, it is simply a foreign subject that you and the wife have made brilliantly fascinating. With that said, I am keenly interested in the concept (which must be proven and I'm sure you will as you have to) that you can power your lifestyle with a maximum of free and/or renewable energy sources, depending as little as possible on diesel engine electrical power propulsion. Now you will have my full attention with every upcoming video to see how this new tech, whether leading or bleeding, will shake out.
One should always consider the worst case scenario which in the case of this system would be thermal runaway from the Lithium batteries. A fire like that would be impossible to extinguish at sea (on land too). Boeing solved the problem on the B787 by encasing their lithium batteries in a fire and heatproof steel casing after several serious incidents that grounded the aircraft. Are your batteries in a steel (or other material) protective casing?
It's really not unlearnable technology. In fact, it's fairly simplistic. Find someone that can verbalize it is a bigger challenge than deploying the design.
"That was a well thought lucid explanation of all the GO parts on the boat". Glad there isn't a quiz later....LOL Lots of wicked cool stuff!! A little My Cousin Vinny line stolen there....
We were just at Ft. McCalister GA where the current runs at 4 or 5 knots easy. You could anchor in the river there and generate in both directions with the tide coming in or out using the hydro regeneration mode and wouldn't really need anything else. The battery would keep you going through the slack tide. Very cool! Amazing there isn't hydroelectric on all of these tidal rivers for the towns along them. What a missed opportunity.
I really like all of the redundancy in this setup. To be able to move the boat in no wind without using diesel fuel is a huge game changer in my opinion. Less wear on the diesel engines because you don’t have to run them for short trips is also huge .
There are a lot of ways to accomplish a hybrid. I'm happy to see that HH has put the thought in to do this 100% right. I'm an electrician and kept looking for something to poke a hole in but this system is awesome. Great job HH! And Nikki and Jason also deserve credit here. You guys always put the required thought into what you're doing instead of just going with the crowd and doing things the same way it's been done for the last 100 years. Make sure to get that dishwasher so you don't make a liar out of me.😘
Really liked the systemexplanation. I‘m an EV guy for cars but I‘m enjoying this fulltime hybrid electric home vessel. Absolute awesome what HH put together and how many good details the system got. Looking forward to the videos of your own boat coming soon
04:40 - I really like how James makes it so clear and simple by explaining why, not just how. That chart at 04:50 (Delta -28% efficiency) is something never mentioned out loud in the main stream, as in an industry dirty little secret in the EV world.
I love watching your build and the SLV build. These boats really are the future of sailing. It's mind blowing how many options you have with these engines / motors. Redundancy is king. One thing I love about the pod drives is the ability to use a single joy stick for manoeuvring / docking. Judging by your electrical diagram your system seems much simpler and more reliable. A lot of complex decisions to make.
Simply fascinating, but complicated! It is just a matter of the experience bringing familiarity. The Wynns will do that. Fair winds are on the way. Enjoy.
Looks like a great system. I'm wondering how trouble shooting will go once you get away from the dock. During electrical storms can you isolate your electrical components to keep them from damage, and if the controls damage can you limp in manually ? Great video today. Ray
I missed seeing Nikki on this episode. I could hear her voice in the background, leaving me to believe she understands the workings of the hybrid drive system quite well. If two heads are better than one, then once the Wynns are out on their own, they'll be better able to diagnose problems that inevitably arise and be dealt with. Still, I feel that in many ways, Nikki Wynn is the reincarnation of Audrey Hepburn. Her smile or even the sound of her voice, adds an undefinable energy and appeal to the episode . Despite no Nikki, Jason and their factory rep gave an easy to grasp understanding of the basic capabilities and limitations of their boat's hybrid battery/diesel power system. Thanks, guys!
@ 17:20 Jason's perplexed expression while attempting to comprehend the explanation was priceless. Don't feel bad. If you could see my face, it was the same. LOL
I have a lot of experience with “cat” diesel engines. If you don’t run a cat hard, if max power is called for, it won’t produce. It will sputter and carry on because it’s been used lightly. So, it’s important to blow a diesel out regularly. It will literally blow all kinds of smoke and black junk out. In large generators we do it with a load bank, that forces 100% power to produce max power. what makes your engines different?
For anybody keeping track, 1 horsepony is 750 watts. The electric motors are about 13.5hp (10kW) combined. You're not going to put it up on a plane with that kind of power, but it's plenty to move the boat around. When he's talking about recharge, he mentioned 250w (1/3hp). That's just energy conversion losses. It's a very cool system, and I think the Wynns will learn to make great use of it. I think the practical reality is that the electric motors will be great for mucking about at low speed. It's great when he mentioned about running diesel on one side, and electric on the other. I don't think much long range cruising will be done on the electrics however.
There are times that it takes a really smart person to dumb something down. This, I feel, was one of those times. Good information provided in a easily understood manner. Can't wait to get your feedback while actually in use.
I like backup. Backup is good. Very smart design. Remember your electro-mechanical basics: Twice the velocity costs four times the power. Thus, cutting your speed in half doubles your range.
1:30 I love your comment and your passion behind it. I feel the same way. Was hoping to meet you at Annapolis but I’m guessing you’re going to be on the other side of the world celebrating your anniversary. Congrats! I found and fell in love with HH 2 years ago and I am excited for you getting this fabulous new boat.
Remember when the common response was: "It will never work? How about: "Sure it works; but, what about the cost or ... ? Now: "What's taking you so long? When can I get one?" Thank you for leading the industry.
Holy moly! This is a dream engine! I suspect no down time on all your electronics, and with Jason and Nikki, I suspect full battery power everywhere because they are the ultimate savers!!❤❤
These HH boats are really amazing. The systems and everything shows a true understanding of the future with electric-solar-diesel propulsion. I love their electrical work and the Victron systems they set up, and how they integrate everything on the N2K network. On top of it all, they're true sailors and have beautiful all glass cabin windows. What's not to love? I just wish I had the time to go on an adventure on one.
This is very exciting, I am going to have to watch this again. I right off the bat love that the system has a lot of simplicity and redundancy. Going this way in a new boat was very smart in your choice. The content this boat will create is to push your channel. Well done, I am sold!
The owners and service manuals plus video on how to do it properly will be an important asset package. The numbers were being calibrated at one point. That procedure explained with instructions is what would be important to have. When the system is new with few experienced techs around the world, I'd want to be the tech and train an existing technician to help me.
Even if you don't need your motors you still need to run it for maintenance for like 30 minutes a month. Or it might not work when you need it. It should also be run with load not on idle. Love you two. Happy sailing.
An impressively basic and simple set up especially considering the number of functionalities and redundancies. Good to see HH putting time and effort making the interface equally as simple .
Great video! Exciting to see the new boat's features. One question. With so much of the control of the boat managed through the electronic systems, including the diesel engine's gauges, what happens if you get hit by lightning and it fries all the electrical components?
One question I would ask is what happens if something breaks way away from a hhh service center. Can normal shops you find all over the world work on this thing? If something terrible breaks is it just ordering some parts and a local shop can do the work, or do you have to also take the boat 1000 miles to a qualified shop?
Jason has come so far, mechanically, since the Wynns' old days of RV'ing. Really pushing his limits to learn more and be a better, and more innovative, owner. Is this really the same guy who struggled to change a tire in Alaska? ;)
As a long-time watcher and first-time commenter, I couldn't be happier for you guys! It's going to be an amazing boat, and I can't wait to watch it sail and wash dishes (#teamjason!). As you usually spend several days at anchor between hops, I imagine the solar system will usually be able to top off the batteries, run hotel power (including the watermaker, AC, and water heater), and give enough energy to get under sail, all without starting the engines, which is going to be awesome. Indeed, given how infrequently you'll be running the diesels, I wonder whether you (or HH) considered skipping the engines altogether and just adding two or three 4kW-ish diesel generators instead. Capabilities could be about the same, including hydrogeneration. The disadvantages would be a bit of extra weight (the electric parts of the generators), arguably more sensitivity to lightning strikes, and some efficiency loss when under diesel power. But the advantages could also be significant: simplicity, better weight distribution (since the generators could be mounted anywhere), more redundancy with 3+ generators, and the simple fact that it's much easier to bench service or replace small generator units than a whole marine engine. Also, without the engines there, the the electric motors could have direct drive to the prop shaft, which would avoid the clutch and belt, with its potential maintenance concerns and noise, and the combined throttle system, which seems potentially tricky. The diesel-generator-electric-motor drive pattern is pretty common on larger ships and trains. Anyway, just curious (ha!) whether you had any thoughts about the trade-offs.
so informative, thank you. My only comment about the presentation, I had a hard time keeping track of where Jason was with his twin brother James standing there.
Great introduction to the system. 48vDC is starting to get traction in the trucking and automotive industry also in time more system components will be ‘common’ place, but nice to still have ye olde 12v for RV style appliances that are readily available.
This was very informative. The capacity for multiple configurations is excellent. The only minor thing I got stuck on was the use of "Electrocution" vs. "Electric shock"; however, the point was clear. 🙂 I always enjoy your weekly updates.
Can't wait to see you guys get ON THE WATER and try out this magnificent machine full of technology. I"m sure this type of boat is at the forefront of many future boats to come.
I love the regeneration with the boat under sail only, it produces electricity with the props turning. It wasn't mentioned in the video but I'm only guessing that it actually helps with speed since the props are not fixed causing drag with them spinning freely.
I do see a few problems with the electric motor connected to the shaft after the gearbox, using a belt. 1. If the electric motor gets stuck (internally) that will hold the driveshaft and will not let the engine run, unless it breaks the belt. 2. Based on the information provided, The electric motor belt will be running every time the boat is sailing, that will drastically reduce the life of the belt and the belt pulley. Why not using gear system (with a manual disengage) to connect the electric motor to the driveshaft, it is more efficient and reliable?
The rectifier output in a 48-volt power supply system is more than 50 Vdc, i.e. 2.23 V * 24 cells = 53.5 Vdc (trickle charging voltage) The benefits of a 48-volt system are as follows - lower current for loads with the same power rating as the 12-volt and 24-volt system; lower current output from rectifiers and batteries to the loads would entail power lines with smaller wire/cable sizes to each load.
All nice. Going a bit further with the whole boat system say the worst case happened and you lost all electrics say through a lightning strike and you had a freak wave are you still able to sail and motor just all manually. The tech is great but there are always things that crop up unexpectedly.
So many Curious viewers! The most common question seems to be "Great system, but can you get it serviced anywhere in the world?" and the answer is definitely yes! The diesel engine is a fairly simple marinized Kubota engine, so parts should be readily available and any diesel mechanic worth their salt should be able to fix anything Jason can't. The electric motor is also super simple, and HH techs will be able to remotely log in to the system from anywhere in the world for troubleshooting and diagnostics. Hope that satisfies your "curiosity"!
Curious Minion
Thanks for your channel. A question, everything being digital, are you worried about lightening strikes or any electrical failures?
Hello Jason and Nikki, with so many options available, I'm wondering if the Yanmar engine is available?
The amps are what kills you, not the volts. That was very dangerous comment coming from the factory rep.
Also look into a 4 blade prop vs. a 3 blade. 4blade require more torque, but that's what electric motors do thus 4blade props are more efficient and more responsive than three.
@@yewtuber Touching a million amps at 1 volt probably won't kill you because it's not enough voltage to break down skin and make it conduct. It takes more than say 50 volts to make skin conduct, which is why low voltage systems are under 50 volts.
Also it turns out that water, even seawater are NOT very conductive, so the risk of electrocution from water + electricity is not a great as people think.
As an engineer with a career in automation, I'm impressed, and also recognize that you two will really need to learn these systems. I'm confident you can learn to troubleshoot and repair, but it sounds like it's going to be a whole new class of debug from what you had before.
But Wynns have a very intimate understanding of the entire system.
I've been critical of Jason's lack of mechanical knowledge. That being said, he has self educated about not just mechanics but also system design.
The diesel is very uncomplicated, and the electric motor itself is also very simple. Techs will be able to access the system via WiFi, so the techs at HH will be able to help troubleshoot from anywhere in the world.
Curious Minion
Jason has had a Supreme learning curve from his day of Rving.
I had doubts for this duo as they started there lessons on basic boating and sailing.
To the Wynns, " You have done well Pilgram"
Much respect... and YES you are building the vessel of my dreams of 25 years ago.
The electronics and controllers will be the problem area. You're right, the diesel and electric motors are simple. But the electronic and software "glue" can make it all go wrong-- and unless you have access to the code to debug, it will be a challenge.
I think that is the beauty of this system it is very simple mechanically and can be run fully analog if needed.
When the drive belt from the prop shaft to the motor/generator fails you will have to disconnect the prop shaft flex coupling and push the shaft aft to replace the drive belt. While this is not that difficult it could be easier. You could put a spare belt or two around the prop shaft during install and zip tie them into a safe position clear of any moving parts. Then when the belt fails just slide a new one forward and onto the pulleys. You will only need to slacken the belt tensioner and then retighten it with no need to disconnect the prop shaft. This could be a plus if the belt fails at sea under difficult conditions. Thanks for showing us your beautiful new boat. Happy sailing.
Yes, but belts also tend to be highly reliable. More reliable than shafts, gears, universal joints, etc.
That is a very good idea.
Excellent Ideas
@jackwickman2403 Good eye and nice catch. And yes, HH delivers the boat with a spare zip tied exactly as you described. You get the gold star this week!
Curious Minion
@@armslength2618 Belts are highly reliable in power levels and applications such as this one. We agree they're not suitable for use everywhere.
(Lots of engines use timing belts, for info. Some motorcycles use belts as a final drive between the gearbox and rear wheel. Google: "What motorcycles have belts?")
Nice to see Jason hosting and excited about something. It’s a beautiful boat and I’m excited for you. Can’t wait for the full boat tour!
wait until they get a dishwasher. Jason will be beyond EXCITED!
@@TheCharlesLuu I donated! Cant wait :)
@@TheCharlesLuu yeah... But I'm gonna miss the "but first, Jason has to do the dishes" comments. Lol
This architect just gave the best description of how this system works. B. R. A. V. O. ‼️
Sixth way to propell: perpetual motion configuration. Run one motor off the battery bank. Put the other motor into regen mode, and recharge the batteries. No wind? No fuel? No problem!! ;-) 😉😉
It's truly an incredible advancement for the marine industry, one that we are STOKED to be a part of! Electric sailboats are the future!
Hey - Get them to put two extra belts on each motor and zip tie them out of the way now as they are probably very difficult to replace the belts later. That way you just cut off old belt and slip new belt in place. I bet it is very hard to get a new belt around the prop shaft once mounted in engine room.
Yes, that is what HH does. Ready to go!
Most of the information went way over my head, but redundancy really struck me. This, coming from someone who has 5 different ways to make coffee in her trailer. 😊 AND I never have to worry about getting stuck in the middle of the ocean like you two do. Good peace of mind. ❤️❤️
There's no way to get stuck in the middle of the ocean
wow, looks like a great system, 1 thing not mentioned is that most trains since 1913 are all diesel-electric, As early as 1913, an experimental 60-horsepower diesel-electric railcar appeared in Sweden. About 30 cars of this type, but with more powerful, 150-horsepower engines, soon went into service in Sweden, Denmark, France, and Tunisia.
Dam guys that was the best understanding of a system that makes sense on all points... nice
So!.... I was REALLY concerned about how much solar you have was really NEVER going to get you to a FULL state in your huge battery bank..... NOW I get it, with this system, you'll be sailing almost forever with VERY little to ZERO use of any fossil fuels whatsoever. This means, NO MORE carrying all those big HEAVY diesel cans when you go ashore, which ALSO means, NO need to even HAVE those big cans for your diesel storage. Man, what an IMPRESSIVE system! I'm SOOOOOO HAPPY for you and Nikki!!!!
What an amazing boat, the HH 44… Can’t wait to see you sailing her in your future videos!
That's a really impressive system
Really efficient and at the same time built with kit that is easily worked on by a normal mechanic. Love the fact that the engine doesn't have electronics on it that can only be worked by a dealer.
The down side is what are you leaving on the table in terms of power and fuel efficiency but not going common rail. The software to diagnose those system , while proprietary is usually available somewhere for those willing to search.
True, but the pressure needed for the common rail system is high enough to amputate a finger if you don't know what you're doing when you service it. For owner service and repair & parts availability in remote areas, I'll take the simpler system & give up a little power. Especially when Nikki and Jason plan to rely on the electric motor as much as possible.
Curious Minion
What is common rail?
@@chrismulvey49 Common rail diesels use a high pressure pump (30k psi?) feeding a common rail (pipe) with solenoid operated injectors controlled by an ecu to spray the fuel into the cylinders. Direct injection diesels use a relatively low pressure mechanical pump/injector each fed by separate fuel lines, usually driven by the camshaft.
@@fredbugden3511 One problem with common rail diesels on blue water boat is their need for very clean diesel. So you need some installation (filters) to make sure that what you are feeding into the high pressure pump is best quality. One more system that needs maintenance, spare parts a.s.o. On a boat moved 95 % by the wind I don't see the advantage of having a common rail engine.
Same system as used on WWII submarines as there were called Diesel/Electrical Boats. A German sub was captured (U505), as it's batteries were "Flat", had no power thus have to surface and surrender. Did the same trick, as it was being towed by the Americans after capture, the props were spinning charging the battery's bring it back to life. It is now in a museum in Chicago..
That means it's not the same system. This system is a parallel hybrid where either or both the diesel or electric can move the boat independently. In that way it has 2 way failover redundancy. Any one system can fail and the boat can still move.
If the sub could not move due to discharged batteries, then the sub was a serial hybrid where the combustion engine acted as a generator to charge the battery and the Diesel could not turn the prop directly. It's also possible the diesel had a problem or ran out of fuel and could not start.
@@LoanwordEggcorn It was kept down due to depth charges, batteries ran out, that was it. U505 was surrounded and had no were to go. The engines were started with compressed air. The WWII subs engines were NOT connected to the prop shaft, but to a generator which charged the batteries, OR powered the shaft motors directly. OR full motors or Full battery charge. The entire sub was controlled by "Maneuvering" a small room maned by 2-3 people that controlled the flow of current...Quite the setup. To me the similarity's were striking.
@@MrDonJBerg Thanks. If the Diesel can turn the shaft directly, then it's a parallel hybrid.
@@LoanwordEggcorn The Diesel does NOT turn the shaft directly but turns a generator which powers a motor which turns the shaft...
I had the same engine/transmission. Raises three questions. 1) Never would start without using glowplugs, even with outside temperature at 90F. That takes 50A for about 10s for each engine PLUS the starter motor load when turned over. 2) Could not stop without pulling manual decompression handle. Has this been replaced by using a solenoid? If so, is there still a manual decompress if solenoid fails? 3) Running transmission in 'N' wasn't recommended, had to be in 'R'. Ask questions about this!
To me, this is the perfect setup: harnessing the power of the sun and water flow for energy, storing it in batteries, and having diesel backup for when there isn’t enough sun. Quiet, eco-friendly sailing, with a little range extension of electric motors, powered by diesel engines when the battery array is running dry.
Wow, I think you really lucked out with the engineering talent at Hh. In a way, I think very talented engineers are attracted to challenging forward thinking projects, and that has happened here. At a legacy boat manufacturer, I suspect your talented engineer would be stifled by older engineers who just want to do it the “way they know works”. I am really excited to see all this tech come together.
Always a good day when you post a new video! Xox
The drive system looks cool. I love the idea of running quietly on the electric motor for 2 or 3 miles before hoisting sails or, vice versa, dropping sails and quietly entering the anchorage or marina. Also great for fast charging the big LiFePo4 battery bank from empty to full in 2 hours if necessary.
And the key thing is that all of the electrical energy used to motor can be recharged simply by sailing. So motoring becomes WIND POWERED. This is working in harmony with nature MUCH better than burning fossil fuels.
In reality, most people with electric drive sailboats use the motor to get away from the dock/anchorage, raise the sails, then use the sails to recharge the battery for a while by hydrogenerating. After charging enough, the motor acting as a generator is disengaged while under sail. Coming back to dock or anchor, the electric drive is used to motor again.
And battery can be recharged by solar, shore power, etc.
Somebody far wiser than me once said that “simplicity of operation is a result of far greater effort at the design stage” . I think the HH hybrid system is a perfect example of this approach.
Great video as always 👍
I would say that is 100% true. I just wonder if the B&G interface craps the bed(they do), does everything still work or have a backup? Electronics are great until they do not work and modern electronics there is no "fixing" them, it is just 100% replacement.
I really like the fact that alongside the considerable amount of tech on this boat, at the centre of it is a fairly agricultural diesel that I could fix with a bag of spanners. And as a bonus its shaft-drive too. I've never really been a huge fan of common-rail or saildrives. Getting more interested in HH the more I see of them.
Jason looked like a kid who just woke up on Christmas morning and saw all the presents under the tree with his name on them! I will have to watch a few times just to understand it all. Looking forward to seeing it in action.
Lots of comments from folks who have not designed, built and sailed an electric boat for years.
I have.
My Pearson 36 had a similar 10kw brushless electric motor and in my opinion, the HH44 setup is sized right, practical and functional. Far superior compared with my DIY system.
In short, I have no doubt that it will work & Jason, you are going to love this propulsion system!!!
You have 2 generators on board. You have 2 engines and 2 motors - each capable of moving the boat on their own. I know of no other boat with such redundancy.
Just one question: how to change the belt? I know it lasts a long time (mine went over a year with heavy usage). Must be a coupler you can disconnect to pull the belt off the shaft.
Good eye. HH delivers the boat with a spare belt already inside the loop & zip-tied out of harms' way. That lets you wait for controlled conditions to install another spare for the next time.
Curious Minion
Those HH engineers are sharp!
Again, I doubt you’ll need the spare belt in an emergency, but good to know it’s there.
I love the design ethos of this HH. The engineering fundamentals kept simple & accessible with an elegant hybrid interface. Excited to see the testing etc.
Great job HH, my fantasy yacht league ties you guys & Outremere as top choice!
Great video. To me, this is the perfect setup for a live aboard cruiser. You could literally just use the diesel very sparingly and use very little fuel. Quiet. Clean. But always there to get you away when required or to charge batteries for AC and other living comforts.
And it is still a performance sailing machine. I love it.
I’ve been doing Building Automation for over 27 years and my concern is leading edge tech vs “bleeding edge” tech. There are many interconnected systems that concern me with how well they will hold up in a marine environment. But this is amazing stuff when it is working right. I sincerely hope it gives you decades of worry free service!
At least it's a simple bolt-on generator/motor that presumably can be isolated mechanically if it fails. And a simple gearbox for the engine using existing tech. I've seen variable pitch props driven electrically to optimise regen efficiency, which seems great but again prone to failure, potentially. And this parallel system wins hands down for redundancy IMO.
It's been in production for over 15 years, so it's not leading tech or bleeding tech really...
What impressed me is that they are repurposing a well established system used for years on river boats. Just looking at it, it looks simple. What is more ubiquitous than a Kubota diesel or a belt drive motor generator? They have some new software to perfect, but that can be updated wirelessly.
There's something really cool about the idea of sailing into some pristine remote anchorage, using only electric to maneuver while dropping the hook, and then recharging the batteries with solar. No loud diesels running, no stinky exhaust or fuel smells to detract from the quiet and fresh air. Will be hard to run totally off solar without turning off a lot of the luxury systems and sweating a little, but would be doable. You can really be quite self sustaining for a long time. Food becomes your limiting factor,.
I've said it before you two do a fantastic job with your channel and editing. Super duper ❤🙏😎
Thanks!
That young man is one intelligent person!
I live a couple of miles from Braidbar Boats who feature in the magazine article you showed and regularly walk the dog along the canal past their yard. It's an ambition of mine to live on a canal boat, they are one of the top canal boat builders in the UK and I'd love to have them build a boat for us so I've looked into their hybrid system, and what was described here sounded very familiar, because Braidbar also use HybridMarine! One big advantage on a canal boat is engine efficiency - you size your engine, gearbox and prop for going against the tide on a fast flowing river with a gale force headwind but then spend 99% of the time pootling along a current less canal on a calm day. Putting the engine to so little effort means it runs really inefficiently, so adding the generator and working the engine hard means it's massively more efficient and you're using far more of the energy in the diesel fuel, stuffing it into the batteries and then, once fully charged, switching off the engine and using that energy for propulsion for far longer than you had the engine on for. On canal boats in the UK you can get enough power from solar for domestic supplies (though not necessarily in the winter) but the sun isn't ever really bright enough and there isn't enough space for panels to generate enough for propulsion unfortunately. Braidbar also provide a remote controller so you don't even to be on board to move the boat, e.g. if you're single handed and going through a lock - David (Cruising the Cut) did a video about it a while back. Wow! Suddenly this video went from China to so close to home!!! Top stuff!
Hello, Nikki and Jason! Your timing in the adoption of this particular hybrid system is perfect. The system is cutting edge, but mature. James and his team have brought an amazing level of sophistication and refinement to the final product, always with attention to its ease of use by Sailors.
Stepping away from things technical, the bottom line will be a whole new level in your quality of life on the water..
Well done!
When thinking about maintenance, my biggest concern is the control systems. There's still the prop, belts, transmission connections, but those will be relatively easy to diagnose and fix. While the electronics on the control system, the wiring, screens, etc are the things that will be hard to just diagnose, let alone repair, while at sea.
It is worth pointing out that these hybrid units are not proprietary to HH but could theoretically be retrofitted to existing boats.
First a disclaimer : I am NOT a sailor, nor have any general interest in the lifestyle, but have been watching your videos because, quite frankly, it is simply a foreign subject that you and the wife have made brilliantly fascinating. With that said, I am keenly interested in the concept (which must be proven and I'm sure you will as you have to) that you can power your lifestyle with a maximum of free and/or renewable energy sources, depending as little as possible on diesel engine electrical power propulsion. Now you will have my full attention with every upcoming video to see how this new tech, whether leading or bleeding, will shake out.
One should always consider the worst case scenario which in the case of this system would be thermal runaway from the Lithium batteries. A fire like that would be impossible to extinguish at sea (on land too). Boeing solved the problem on the B787 by encasing their lithium batteries in a fire and heatproof steel casing after several serious incidents that grounded the aircraft. Are your batteries in a steel (or other material) protective casing?
Not if the batteries are LFP.
This was fascinating and relatively easy to understand the basics, all due to the three of you, from explanations through editing ! Thank you.
I didn't understand most of it, but it is nice to see Jason so excited!
It's really not unlearnable technology.
In fact, it's fairly simplistic.
Find someone that can verbalize it is a bigger challenge than deploying the design.
Wait till they install the dishwasher.
Can you imagine that RVing turned into this sophisticated catamaran? Wow!
Very interesting to see this tech, thanks
Thank you!! 💙💛💙
"That was a well thought lucid explanation of all the GO parts on the boat". Glad there isn't a quiz later....LOL Lots of wicked cool stuff!!
A little My Cousin Vinny line stolen there....
We were just at Ft. McCalister GA where the current runs at 4 or 5 knots easy. You could anchor in the river there and generate in both directions with the tide coming in or out using the hydro regeneration mode and wouldn't really need anything else. The battery would keep you going through the slack tide. Very cool! Amazing there isn't hydroelectric on all of these tidal rivers for the towns along them. What a missed opportunity.
I really like all of the redundancy in this setup. To be able to move the boat in no wind without using diesel fuel is a huge game changer in my opinion. Less wear on the diesel engines because you don’t have to run them for short trips is also huge .
There are a lot of ways to accomplish a hybrid. I'm happy to see that HH has put the thought in to do this 100% right. I'm an electrician and kept looking for something to poke a hole in but this system is awesome. Great job HH! And Nikki and Jason also deserve credit here. You guys always put the required thought into what you're doing instead of just going with the crowd and doing things the same way it's been done for the last 100 years. Make sure to get that dishwasher so you don't make a liar out of me.😘
Really liked the systemexplanation. I‘m an EV guy for cars but I‘m enjoying this fulltime hybrid electric home vessel. Absolute awesome what HH put together and how many good details the system got. Looking forward to the videos of your own boat coming soon
Self regenerating power bank capabilities - very cool!
04:40 - I really like how James makes it so clear and simple by explaining why, not just how.
That chart at 04:50 (Delta -28% efficiency) is something never mentioned out loud in the main stream, as in an industry dirty little secret in the EV world.
I love watching your build and the SLV build.
These boats really are the future of sailing.
It's mind blowing how many options you have with these engines / motors.
Redundancy is king.
One thing I love about the pod drives is the ability to use a single joy stick for manoeuvring / docking.
Judging by your electrical diagram your system seems much simpler and more reliable.
A lot of complex decisions to make.
Simply fascinating, but complicated! It is just a matter of the experience bringing familiarity. The Wynns will do that. Fair winds are on the way. Enjoy.
That was really interesting and the engineer dumbed it down so we could all understand. Now I understand why you chose a hybrid.
Looks like a great system. I'm wondering how trouble shooting will go once you get away from the dock. During electrical storms can you isolate your electrical components to keep them from damage, and if the controls damage can you limp in manually ? Great video today.
Ray
I missed seeing Nikki on this episode. I could hear her voice in the background, leaving me to believe she understands the workings of the hybrid drive system quite well. If two heads are better than one, then once the Wynns are out on their own, they'll be better able to diagnose problems that inevitably arise and be dealt with. Still, I feel that in many ways, Nikki Wynn is the reincarnation of Audrey Hepburn. Her smile or even the sound of her voice, adds an undefinable energy and appeal to the episode . Despite no Nikki, Jason and their factory rep gave an easy to grasp understanding of the basic capabilities and limitations of their boat's hybrid battery/diesel power system. Thanks, guys!
@ 17:20 Jason's perplexed expression while attempting to comprehend the explanation was priceless. Don't feel bad. If you could see my face, it was the same. LOL
I have a lot of experience with “cat” diesel engines. If you don’t run a cat hard, if max power is called for, it won’t produce. It will sputter and carry on because it’s been used lightly. So, it’s important to blow a diesel out regularly. It will literally blow all kinds of smoke and black junk out. In large generators we do it with a load bank, that forces 100% power to produce max power. what makes your engines different?
For anybody keeping track, 1 horsepony is 750 watts. The electric motors are about 13.5hp (10kW) combined. You're not going to put it up on a plane with that kind of power, but it's plenty to move the boat around. When he's talking about recharge, he mentioned 250w (1/3hp). That's just energy conversion losses.
It's a very cool system, and I think the Wynns will learn to make great use of it. I think the practical reality is that the electric motors will be great for mucking about at low speed. It's great when he mentioned about running diesel on one side, and electric on the other. I don't think much long range cruising will be done on the electrics however.
I love the emphasis on two separate systems and a normal run of the mill diesel that anyone anywhere can fix. I love complex done simple
There are times that it takes a really smart person to dumb something down. This, I feel, was one of those times. Good information provided in a easily understood manner. Can't wait to get your feedback while actually in use.
My car is a hybrid. The battery is charged when I drive. No need for a plug. Double the gas mileage of my non hybrid. I love it.
I like backup. Backup is good. Very smart design.
Remember your electro-mechanical basics: Twice the velocity costs four times the power. Thus, cutting your speed in half doubles your range.
1:30 I love your comment and your passion behind it. I feel the same way. Was hoping to meet you at Annapolis but I’m guessing you’re going to be on the other side of the world celebrating your anniversary. Congrats!
I found and fell in love with HH 2 years ago and I am excited for you getting this fabulous new boat.
Very cool! I like that they painted every inch of the engine. Including the fasteners
I'm going to be watching every update with total focus! That's a Badass system brother and can't wait to see how she holds up! Bravo 👍❤️🇺🇸
Seeing your journey over the last few years, its also cool seeing the synchronization of your life/dreams/technology melding at the right time
Key word...REDUNDANCY.... Diesel, electric and wind. If they fail, then your TRUE SAILOR SKILLS kick in. Outstanding.
Amazing ! I bet you guys are so excited that you can hardly stand it.
Seeing those two men standing side by side makes me think they could be brothers. Great video.
Remember when the common response was: "It will never work? How about: "Sure it works; but, what about the cost or ... ? Now: "What's taking you so long? When can I get one?" Thank you for leading the industry.
Holy moly! This is a dream engine! I suspect no down time on all your electronics, and with Jason and Nikki, I suspect full battery power everywhere because they are the ultimate savers!!❤❤
You guys are huge ambassadors for the brand 😃
These HH boats are really amazing. The systems and everything shows a true understanding of the future with electric-solar-diesel propulsion. I love their electrical work and the Victron systems they set up, and how they integrate everything on the N2K network. On top of it all, they're true sailors and have beautiful all glass cabin windows. What's not to love? I just wish I had the time to go on an adventure on one.
Fab episode for such a "dry" topic!
But if you're interested, dry doesn't bother you (well... me).
Great video, thank you.
I'll be watching it a few more times. Lots of good stuff discussed.
Wow, what a cool system. It sounds much easier to use and live with than I expected.
This is very exciting, I am going to have to watch this again. I right off the bat love that the system has a lot of simplicity and redundancy. Going this way in a new boat was very smart in your choice. The content this boat will create is to push your channel. Well done, I am sold!
Great presentation, thanks for taking us along!!
The owners and service manuals plus video on how to do it properly will be an important asset package. The numbers were being calibrated at one point. That procedure explained with instructions is what would be important to have. When the system is new with few experienced techs around the world, I'd want to be the tech and train an existing technician to help me.
Even if you don't need your motors you still need to run it for maintenance for like 30 minutes a month. Or it might not work when you need it. It should also be run with load not on idle. Love you two. Happy sailing.
An impressively basic and simple set up especially considering the number of functionalities and redundancies. Good to see HH putting time and effort making the interface equally as simple .
Great video! Exciting to see the new boat's features. One question. With so much of the control of the boat managed through the electronic systems, including the diesel engine's gauges, what happens if you get hit by lightning and it fries all the electrical components?
Super introduction to hybrid propulsion on a sailboat. Thank you.
...really nice formatting ... like the text question/intros ahead of each article
...and REALLY informative across the board THANK YOU
One question I would ask is what happens if something breaks way away from a hhh service center. Can normal shops you find all over the world work on this thing? If something terrible breaks is it just ordering some parts and a local shop can do the work, or do you have to also take the boat 1000 miles to a qualified shop?
Jason has come so far, mechanically, since the Wynns' old days of RV'ing. Really pushing his limits to learn more and be a better, and more innovative, owner. Is this really the same guy who struggled to change a tire in Alaska? ;)
I can’t wait till you all are in your new boat. Really enjoy watching the adventures.
Can’t wait to get started working problems off the new boat.can’t wait.
As a long-time watcher and first-time commenter, I couldn't be happier for you guys! It's going to be an amazing boat, and I can't wait to watch it sail and wash dishes (#teamjason!).
As you usually spend several days at anchor between hops, I imagine the solar system will usually be able to top off the batteries, run hotel power (including the watermaker, AC, and water heater), and give enough energy to get under sail, all without starting the engines, which is going to be awesome. Indeed, given how infrequently you'll be running the diesels, I wonder whether you (or HH) considered skipping the engines altogether and just adding two or three 4kW-ish diesel generators instead. Capabilities could be about the same, including hydrogeneration. The disadvantages would be a bit of extra weight (the electric parts of the generators), arguably more sensitivity to lightning strikes, and some efficiency loss when under diesel power. But the advantages could also be significant: simplicity, better weight distribution (since the generators could be mounted anywhere), more redundancy with 3+ generators, and the simple fact that it's much easier to bench service or replace small generator units than a whole marine engine. Also, without the engines there, the the electric motors could have direct drive to the prop shaft, which would avoid the clutch and belt, with its potential maintenance concerns and noise, and the combined throttle system, which seems potentially tricky. The diesel-generator-electric-motor drive pattern is pretty common on larger ships and trains. Anyway, just curious (ha!) whether you had any thoughts about the trade-offs.
Love that color!❤❤❤
so informative, thank you. My only comment about the presentation, I had a hard time keeping track of where Jason was with his twin brother James standing there.
Excellent run down, Jason. Fine video presentation. Thank you.
Recommend getting three or four extra belts. Excited for you all. Enjoying the channel. Tks for sharing.
Great introduction to the system. 48vDC is starting to get traction in the trucking and automotive industry also in time more system components will be ‘common’ place, but nice to still have ye olde 12v for RV style appliances that are readily available.
Tesla is going to 48 volts in their new cars
Yes Tesla cybertruck in production now is 100% 48V architecture. Soon the whole industry will start transition away from legacy 12v.
We will see! Switching much faster than expected imo
Since I’m not a engineer, it was very interesting, because you did it in ( baby steps) for everyone to fallow and to be inspired, thank you.
This was very informative. The capacity for multiple configurations is excellent. The only minor thing I got stuck on was the use of "Electrocution" vs. "Electric shock"; however, the point was clear. 🙂 I always enjoy your weekly updates.
The terms are quite clear; a painful surprise or possible death.
Can't wait to see you guys get ON THE WATER and try out this magnificent machine full of technology. I"m sure this type of boat is at the forefront of many future boats to come.
I love the regeneration with the boat under sail only, it produces electricity with the props turning. It wasn't mentioned in the video but I'm only guessing that it actually helps with speed since the props are not fixed causing drag with them spinning freely.
Excellent video. Thank you so much for giving us a brief, but understandable, dive into the hybrid systems.
I do see a few problems with the electric motor connected to the shaft after the gearbox, using a belt.
1. If the electric motor gets stuck (internally) that will hold the driveshaft and will not let the engine run, unless it breaks the belt.
2. Based on the information provided, The electric motor belt will be running every time the boat is sailing, that will drastically reduce the life of the belt and the belt pulley.
Why not using gear system (with a manual disengage) to connect the electric motor to the driveshaft, it is more efficient and reliable?
The rectifier output in a 48-volt power supply system is more than 50 Vdc, i.e. 2.23 V * 24 cells = 53.5 Vdc (trickle charging voltage) The benefits of a 48-volt system are as follows - lower current for loads with the same power rating as the 12-volt and 24-volt system; lower current output from rectifiers and batteries to the loads would entail power lines with smaller wire/cable sizes to each load.
All nice. Going a bit further with the whole boat system say the worst case happened and you lost all electrics say through a lightning strike and you had a freak wave are you still able to sail and motor just all manually. The tech is great but there are always things that crop up unexpectedly.