Nice dude I'm so glad to see you got an Arc Droid! Can't wait to see what madness you can come up with, having that at your disposal. Game changer for sure!! Buggy is looking awesome too!
Yo I cannot wait for this build to be done…been watching ever since I saw you with goonzquad and been hooked ever since…..keep it up yo! Love from Arkansas!!!
Nice build! 👍🏼 Are you sure about positioning the steering in the front? Normaly the steering is in the back of the wheels to be able to have a spezific steering geometry. The harder you turn the more you want the inner wheel to turn to help with cornering! This is only possible with the steering at the back of the wheels. If both wheels are turning 100% parallel and always the same angle it will drive like a horse carriage...
Ackerman steering can be achieved with the tie rods in front of the axles, it just requires that the tie rods are wider than the "king pins" aka heim joints. It's more difficult to do, but it can be done
Blew out my power steering pump today, so instead of further aggravating myself it's time to watch someone else work on something for a while lmao. Once I'm done I might be able to see what failed when some more fluid drips out haha.
Love this project. Seems like you could benefit from having some kind of alignment machine to make sure the front steering is straight and won't wear out the tires prematurely from being off by just a little. Glad you checked for bump steer.... that could be a serious issue if you hit something offroad.
You could put a push bar on the front that goes up at an angle high enough to protect that steering equipment. There were a couple of holes at the end of the frame tubes you could use to go up.
Alot of your bump steer is coming from having the steering rack in front of the axle centerline instead of behind it. Since your shocks are castered back compared to the axle centerline, the rack will make the tires Toe in since the arms travel away from the rack. Also, having the rack out of parallel compared to the top or bottom control arm will induce bump steer. Most builders will build a corrected front end then figure out how to weld the plum box to the rest of the frame. You said you expect to go almost 90mph so having stuff perfected will make it feel that much more stable at those speed. It can still work just fine, but not as good as it could be if that makes sense.
Vasily, the reason why a suspension has pump steer is because amrhe three pivots aren't in alignment with each other. They need to be. One way you rid that buggy of it is to change the top or bottom control arm so that all three are in alignment.
When you turn the wheel did your wheels turn the opposite way. You flip the spindles its gonna change direction it turns. You also need to mount the steering box in middle of the control arms so it pivots in same angle as arms
Hey bro. I'm not sure if you have heard about hay days. It's a huge swap meet we're us Canadians head across the border to Minnesota once a year. If you look up skidoo heyday you should find it. Definitely worth a trip save a fortune and find hard to get stuff
i gotta throw a suggestion out there. ive been a sub from way back. and always loved the content and watching the progression in the fabbing skills as well as the contents progression. though i do have one minor gripe. the videos' gotta be longer. keep up the good work. ill be waiting for the next one
@@VasilyBuilds Thanks so much for the reply. Yes it is a gripe but a miniscule one. Though personally I'm not a creator I do understand the amount of work it actually takes. I think alot of people don't realize how much goes on behind the scenes that we don't see. But keep the great content coming. See ya on the next one
Oh, and the Ark Droid will be a game changer. Those things are priceless for especially the garage fabricator. That tool will cut any 2D shape that can be imagined. And with insane precision. Then the speed of it is incredible to boot. You've definitely stepped up your game
I'd like to see you race your builds against one another. Maybe do an 8th mile leader board kinda like cars and cameras with their lap times. It would give some anticipation on how the build will perform and possibly make the builds more exciting than they already are! Cool videos
Like your builds, But that cage will fold over if you roll over with any force, please triangulate the rear bars and add a diagonal at the front. Any side load and that current cage is gonna squish you
Owwwe ,mama me…a ,it’s comin on pretty quick bro,them rear shocks look mint ,it’s going be really comfortable over ruff ground,I know this is a wile away but ,forgive me for getting ahead ,I think we ….well ,you ,have the fab skills to build a 1000 cc turbo ,😉on road rallyish 😊cart /car tarmac eating monster 😎 can’t wait to see this 700 getting paint ,😎great job m8 😉
HaHa, i one of ur first videos i thought, why the hell is he not using a cnc laser cutter or somthing like that... . Nice to see u´ve got that little tool now. Keep one ur good work!
Hey bro I've been looking you know they have 2 into 1 Banshee pipes they're kind of expensive but they could fix your problem with all your wanting to run the Banshee on two wheels and whatnot
You have to go the “rather be welding” way. You have a CVT now add two extra transmissions with 6 chain drives for absolutely no reason only to complicate you life and build and over weight vehicles 😂😂😂
Steering wouldn’t have worked the other way anyway brotha .. your steering would’ve been reversed with the tie rods on the backside of the spindle unless you could have mounted or upside down or something .. turning out cool so far though
Dude you’re beautiful , love what you do and the way you do it. Because you deserve it. You keep on building young man. Greets from a older admirer from the Netherlands.
Hi Vasily, can you tell me where you got thar mini steering rack from please as I'm building a reverse trike motorcycle and that would be a great for the project, Greetings from the UK 🇬🇧
Hey guys i need some help. I have a engine that came off of a briggs and Stratton generator and i want to use the engine on a go-kart. I have it mounted on the kart but when i start the engine it runs at high RPM. how do i make it idle?
You should definitely have that recoil cover powder coated to match the rear shocks! She's looking good though.
Congrats on the ArcDroid. That's going to your biggest game-changer. Look at the stuff Ethan at GHPC does with theirs!
Flew over from Mike Festiva's channel who recommended you. Good stuff. Subscribed.
This is amazing! I can't wait to see it finished! You can add plastic, plywood, or metal panels for finishing touches to! 😁
That's the plan!
I dig that plasma that’s perfect for the amount of space I’m working with. Thanks for sharing, this buggy is so awesome my man!
You're one hell of a builder. Keep up the good work.
Love the 2 stroke builds, great video man!!
Nice dude I'm so glad to see you got an Arc Droid! Can't wait to see what madness you can come up with, having that at your disposal. Game changer for sure!! Buggy is looking awesome too!
The buggy is coming along amazing.
That Ankdroid c&c machine is so freaking awesome. It'll save you so much time and make pushing out videos a breeze.
I'm glad to see someone building and doing something different. Anyone can go out and buy a RZR, but your actually building your toy!
Damn dude, you have your geometry up and down travel on suspensions figured out💪👍 and to mention your steering 👏
Watching you and Chris rbw got me walking through 8in of snow to make 520 sprockets to fit the 1in shaft.
Yo I cannot wait for this build to be done…been watching ever since I saw you with goonzquad and been hooked ever since…..keep it up yo! Love from Arkansas!!!
Same here, that episode with goozquad did great for you !!!
Nice build! 👍🏼
Are you sure about positioning the steering in the front? Normaly the steering is in the back of the wheels to be able to have a spezific steering geometry. The harder you turn the more you want the inner wheel to turn to help with cornering! This is only possible with the steering at the back of the wheels. If both wheels are turning 100% parallel and always the same angle it will drive like a horse carriage...
Ackerman steering can be achieved with the tie rods in front of the axles, it just requires that the tie rods are wider than the "king pins" aka heim joints. It's more difficult to do, but it can be done
Great build keep up the good work 💯👍
Looks fricking awesome son.
You keep building and will get your 500k subscribers.
You got my vote.
Blew out my power steering pump today, so instead of further aggravating myself it's time to watch someone else work on something for a while lmao.
Once I'm done I might be able to see what failed when some more fluid drips out haha.
Another awesome build, great job Vasily!
Love this project. Seems like you could benefit from having some kind of alignment machine to make sure the front steering is straight and won't wear out the tires prematurely from being off by just a little. Glad you checked for bump steer.... that could be a serious issue if you hit something offroad.
You could put a push bar on the front that goes up at an angle high enough to protect that steering equipment. There were a couple of holes at the end of the frame tubes you could use to go up.
One of my favorite build channels.
Hello everyone, I hope y’all are having a great night
That Arc Droid is going to be a game changer for you.
7:58 - Those are some really nice Safety Squints.... Where'd you get them¿?
🤣🤣
Dang Vasily your building/design skills are on point, and that arcdroidcnc is most certainly going to up your game. Keep up the great work👏
Alot of your bump steer is coming from having the steering rack in front of the axle centerline instead of behind it. Since your shocks are castered back compared to the axle centerline, the rack will make the tires Toe in since the arms travel away from the rack. Also, having the rack out of parallel compared to the top or bottom control arm will induce bump steer. Most builders will build a corrected front end then figure out how to weld the plum box to the rest of the frame. You said you expect to go almost 90mph so having stuff perfected will make it feel that much more stable at those speed. It can still work just fine, but not as good as it could be if that makes sense.
I knew the last reason, the parallel part, But the first one is new to me never thought about that. Thanks
Vasily, the reason why a suspension has pump steer is because amrhe three pivots aren't in alignment with each other. They need to be. One way you rid that buggy of it is to change the top or bottom control arm so that all three are in alignment.
That plasma cutter robot thing is fucking insane. In every sense of the word
Vasily you build that quick 🔥
Can't wait to hear your 700 also rip Vasily!
i gotta say im impressed with all your projects. amazing skills. keep the videos coming.
Can't wait to see this thing tearing up the dirt!
*_-I LOVE IT WHEN A PLAN COMES TOGETHER-_*
nice video! the buggy is coming out amazing!
Buggy is looking nice! Interested in seeing more videos on the cnc plasma deal
Ethan (grind hard plumbing) cuts out some pretty insane shapes with that thing.
With having the steering rack at the front will create massive bump steer
When you turn the wheel did your wheels turn the opposite way. You flip the spindles its gonna change direction it turns. You also need to mount the steering box in middle of the control arms so it pivots in same angle as arms
Hey bro. I'm not sure if you have heard about hay days. It's a huge swap meet we're us Canadians head across the border to Minnesota once a year. If you look up skidoo heyday you should find it. Definitely worth a trip save a fortune and find hard to get stuff
You've come far! Excellent!
i gotta throw a suggestion out there. ive been a sub from way back. and always loved the content and watching the progression in the fabbing skills as well as the contents progression. though i do have one minor gripe. the videos' gotta be longer. keep up the good work. ill be waiting for the next one
Yes that's the #1 request so far! I've got to come up with a more effecient system
@@VasilyBuilds Thanks so much for the reply. Yes it is a gripe but a miniscule one. Though personally I'm not a creator I do understand the amount of work it actually takes. I think alot of people don't realize how much goes on behind the scenes that we don't see. But keep the great content coming. See ya on the next one
Oh, and the Ark Droid will be a game changer. Those things are priceless for especially the garage fabricator. That tool will cut any 2D shape that can be imagined. And with insane precision. Then the speed of it is incredible to boot. You've definitely stepped up your game
@@VasilyBuilds editing is like 90% of the battle, got any friends who are big into video editing that might be able to help ya out?
Nice next build should be souping up one of the 125cc mini jeeps
Always fun to watch these channels that do all the modes tk small go karts cause this things are kinda lame stock
Not super sure on why but I read that having your tie rods in front/behind the king pin/steering axis affects handling and steering feedback
I'd like to see you race your builds against one another. Maybe do an 8th mile leader board kinda like cars and cameras with their lap times. It would give some anticipation on how the build will perform and possibly make the builds more exciting than they already are! Cool videos
the front reminds me of a canam maverick, maybe the mini maverick could be a cool name
Loving the new ride I can't wait to see you right
Nice suspension work . This would be cool to see against some of the other YT builds, for instance the cars and cameras trophy kart or grindhards .
They did something like that about a year ago
@@levigeist9105 oh yeah, I completely forgot
W man fr W kart FR W everything FRFR
Honored ☺️
Man you have come a long way.
That thing looks nasty sick
Jeep it pushin vasilly we fw ya
Like your builds,
But that cage will fold over if you roll over with any force, please triangulate the rear bars and add a diagonal at the front.
Any side load and that current cage is gonna squish you
Mulțumesc....Succes in tote proectele
You do beautiful work.
20 years of CAD experience. Happy to give you a Fusion 360 crash course over Zoom if you want! Get the most out of your new CNC!
Ok. What's your email and I'll keep you in mind
Badass builds
Owwwe ,mama me…a ,it’s comin on pretty quick bro,them rear shocks look mint ,it’s going be really comfortable over ruff ground,I know this is a wile away but ,forgive me for getting ahead ,I think we ….well ,you ,have the fab skills to build a 1000 cc turbo ,😉on road rallyish 😊cart /car tarmac eating monster 😎 can’t wait to see this 700 getting paint ,😎great job m8 😉
Love It !!! Greetings from Germany
Another awesome video!!
HaHa, i one of ur first videos i thought, why the hell is he not using a cnc laser cutter or somthing like that... . Nice to see u´ve got that little tool now. Keep one ur good work!
Ratherbwelding UA-camr could help u out a lot about the arc droid or grind hard if u need pointers on operation n layout
Hey im going to attempt to make a crosskart from scratch because i loved yours, any tips?
Hey bro I've been looking you know they have 2 into 1 Banshee pipes they're kind of expensive but they could fix your problem with all your wanting to run the Banshee on two wheels and whatnot
I have one. I actually prefer the peakiness
I appreciate the video.
Great work 💪👍
You have to go the “rather be welding” way. You have a CVT now add two extra transmissions with 6 chain drives for absolutely no reason only to complicate you life and build and over weight vehicles 😂😂😂
great video like always -- keep up the good work looking good
]you never showed how the cvt couples to the rear diff.i can see a chain but how is sprocket on diff?
great stuff thanks
Steering wouldn’t have worked the other way anyway brotha .. your steering would’ve been reversed with the tie rods on the backside of the spindle unless you could have mounted or upside down or something .. turning out cool so far though
Your shocks should be closer to 90 degrees when looking at the vehicle from the side
I surprised you didn’t extend/stretch the body of the kart so that it would be a more comfortable ride.
Dude you’re beautiful , love what you do and the way you do it.
Because you deserve it.
You keep on building young man.
Greets from a older admirer from the Netherlands.
Super cool!
you arent concerned about your caster having the rack mounted like that??
Hi Vasily, can you tell me where you got thar mini steering rack from please as I'm building a reverse trike motorcycle and that would be a great for the project, Greetings from the UK 🇬🇧
It's in the description
@@VasilyBuilds cheers youngster, you're a gentleman. 🇬🇧
How come the rear suspension looked so off like the geometry was different
You have come a long way since you mounted an China doll engine on a bmx frame😅
Bro i meed your help... i need some pointers on the rear end i want to go independant rear on the gkm200
How's the build coming?
Hey Vasily can you point me towards a PDF that gives me a step by step on the teardown and rebuild of a 150cc gy6
I think there is a lot of UA-cam channels that can help you on this
@@VasilyBuilds I got it man thanks! Sorry for the bother for such an obvious solution
You should build a Yamaha superjet for summer
That not Chinese buggy is gonna be wicked.
700cc 2 stroke? What motor is in that rig?
I have a y pipe and expansion chamber if you need one still
Have a bunch of 700 Polaris parts laying around. Let me know what you need. Have an airbox too
woah never been this early before
Hey guys i need some help. I have a engine that came off of a briggs and Stratton generator and i want to use the engine on a go-kart. I have it mounted on the kart but when i start the engine it runs at high RPM. how do i make it idle?
Just bad A$$ .. your stuff is wicked kewl !!
Vasily, I have drag pipes for that xcr banshee if you wanna make a deal of some sort.
What kind? I already have some second hand rdz pipes
@@VasilyBuilds check Instagram sent pics
Rpm concepts is the company, formerly affiliated with Larry Rugland Motor's
Nice dude
Is there not junk yards in the south
Not with snowmobile parts
Wicked
I think i seen this guy at church before in chattanooga
I like this video 📹
PLEASE WEAR PPE WHEN WELDING, love the build tho
👍
🔥🔥🔥🔥🔥🔥🔥🔥🔥
😀😀😀
This shit would smash reds 450 haha
For the Algo...