@jackmagnium6115 Yeah, I meant like cut the whole inside out, so on the outside, it looks like a truck bed, but the inside has plenty of space for the engine. Just for looks
I don't know how it's running, those engines are meant for gravity feed. The fuel tank always sits up on top of the engine. Love it , keep up the awesome builds.
this really brings me back to the powerwheels i remember being like 12-13 maybe 14 watching the whole build on all of em this is sick keep up the good work
Sir will, I used to watch you on grindhard and have been following you since you created this channel! Its becoming one of my favorites to watch and it’s interesting watching you create/build
Best project yet, great job guys. The finished product does reflect how much you really put into it. Can't wait to see what you come up with next. Keep on keepin on.
Lol you definitely put the U in BUM on that exhaust- also youll have to take the exhaust off to remove the engine. Keep it classy-ugly throw a pepper pot muffler on it! That suspension worked out surprisingly well, super low CG, excited to see what comes next on this project.
I like when Will says things like "baller as heck"and doesn't use vulgar language because I like to watch your channel with my kids. I also love seeing Taylor get more into the action and doing some work. He's grown on me 😂.
ive never seen someone weld a pillow block to something yall are wild for that, also no chain adjustment is a strong choice. the build looks awesome though
This is definitely the best work from you guys. You could have offset the engine slightly to the right rather then offset the axle. Or even if the the engine was forward. he only recommendation i have to to offset the engine to the right next time
Fix the brakes, and the belt so it won't spin [the scream...] place the tank above the engine... it doesn't have a gas pump... the carb is gravity fed... and you'll have a great machine Will... I like the geometry... this thing looooves to turn... and you haven't see it's potential yet!...
You could mount the jack-shaft on the chassis, right near the pivot of the swing arm and mount the motor "floating" off the rear of the frame( not on swing arm). may just need to add a chain tensioner, that way the motor doesn't bounce around when riding, and ride quality will be so much better!
That's amazing, though I think you should probably have mounted the engine to give the belt just a bit of slack when the drive pulley hasn't begun engaging yet. That way it won't try to roll away at idle.
U guys honestly make my day dude im 22 about yalls age and back in the day i Watched the Barbie jeep and it gave me the idea to make a mower with atv suspension and 24hp vtwin lawn mower engine I don’t have a atv frame yet but if u guys want I could send picks and stuff of my idea maybe u guys have the money to do it better than I could , but Im always waiting on the next video and keep making cool stuff 😎
Love the fact that just like when he was at grind hard he’s robbing parts for the next build this is why I watch I also do the same thing with my garage builds
You know what would be awesome? If you spent some time making it premium, and then built a second one exactly the same - or used the police car version! Imagine ripping two of those together - they could be your signature vehicles.
You should weld a bar on each side above the door. That way when you climb in and sit down you can lower your body and support your weight. Since the doors aren’t too strong. Paint it yellow. Look great
I’ve watched the other two videos, I love this thing, I think you should widen the back wheels out to match the front, it looks alittle weird right now with the front way wider than the back. I think a little box around the engine could look cool, like a truck as some other comments said
Love the builds and the channel....just some advice.....stop cooling your welds with water when you rapidly cool heated metal it weakens the metal and it will eventually fail instead of H2O use quenching oil or a sponge and dab it. Keep the projects coming man you guys are killing it!
You shouldn't have a rear shock, it should be like a truck frame w/ the engine in the bed.... That would make this ride so much better and would give you more room for the engine and stuff. 😁👍
Coops looking great the only thing I suggest to do is build a shield around the belt just in case it blows it don’t smack you guys in the back of the head!
⛑️SAFETY FIRST!!! I notice you guys doing welding and torching by the entrance often. I also notice you guys working with fuel there too. You also store what appears to be fuel and batteries by the front door. If you guys have a fire emergency at the front, how do you escape with no other exit? In my state it would be illegal to have a building without 2 exits, other than for storage, just for this reason. Hate to see anything happen to you guys that could have been avoided. PS LOVE the channel! ✌🏻🥰
Noooo not the drone😂 5:37
I'm actually shocked yawl don't have more subs. Great production quality
@@Bummotorsport it'll be like that on those bigger jobs
@@BummotorsportTHANK U SO MUCH FOR REPLYING😆😆
@@Bummotorsport ur should get a lil kids truck and make it way much better
@@Bummotorsport and I watched the whole lil tikes series it’s real good!🤩🥳
Nice job guys love seeing all my stuff being used for something instead of collecting dust in my shop. Frank....
Frank, you're awsome for helping these guys out, hats off to you sir!
Frank is the real MVP, thanks for helping provide this amazing content
Let’s goo frank
that was a great boost you gave to the team Frank... God bless your heart! you're the man!
Glad your doing an actual series not just randomly skipping around
You guys should get one of those plastic red wagons and put it around the engine. It would look like a mini tikes truck lol
Exactly my thought!
@@Aar0n2009 the heat of the engine would melt the plastic. and cause a fire. not a good idea
@@jackmagnium6115not if they leave a hole for the heat to escape through
@jackmagnium6115 Yeah, I meant like cut the whole inside out, so on the outside, it looks like a truck bed, but the inside has plenty of space for the engine. Just for looks
I was going to say the exact same thing
The positive attitudes from you both keep the viewers a viewin! Yall deserve a shop of your own!
You should totally add a light bar on the top of the roll cage!
Yea that would be sick
That exhaust is definitely a restriction for that that engine
I need friends like these guys.
I don't know how it's running, those engines are meant for gravity feed. The fuel tank always sits up on top of the engine. Love it , keep up the awesome builds.
I said the same thing... I hope somebody read it!
@27:54 It has a vacuum fuel pump on the Top of
engine.
Not all of those engines are set up like that. Some come with pumps as standard.
@@user-McGiver I got a " I believe so " from BUM
Sweet. Loosen belt a little so will idle. Keep it up
The machines get better and better. Love to see it!
Thank you so much!
I can't believe you welded those pillow bearing mounts on a round tube and they actually came out straight, lol
😂
it needs a little box, looks like a mini truck, i love it 😂
This is NEXT lev!
Thanks for the help dude!
That thing's awesome haha
this really brings me back to the powerwheels i remember being like 12-13 maybe 14 watching the whole build on all of em this is sick keep up the good work
badass! ~Welding in places you can't even SEE!! ~
I gotta say, you nailed the exhaust. It sounds so much better than most other engines.
Yes i love this littil car🙃
Another one in the book. Good job guys. Thanks Ray
Sir will, I used to watch you on grindhard and have been following you since you created this channel! Its becoming one of my favorites to watch and it’s interesting watching you create/build
is he not on grind hard anymore?
@@mintkeegan3213no 😢
@@mintkeegan3213 Bruh where you been 😂
@@morganmorris3459no fr when did that happen this account was made april has it really been that long😢 y did he leave tho?
Your hard work pays off with some awesome builds. You will get the fabrication skills much faster as well,great channel and nice machines!
BALLER AS HECK t-shirts and hoodies please!
That’s a great idea!
Yes!! Definitely needs a shirt for that! 😂
Love how proud you guys are regardless how things look this is how home diy people get real inspiration cant wait to see more
Did I just stumble upon 'Will from Grind Hard Plumbing Co' in my UA-cam suggestions?!!
Me too!😂
That's just awesome in every way.
Best project yet, great job guys. The finished product does reflect how much you really put into it. Can't wait to see what you come up with next. Keep on keepin on.
Never give up bro! You were blessed with a jumpstart on UA-cam. Now get her done!
Crazy seeing Matt pop up! small world!
BALLER AS HECK!! 😂😂😂
Lol you definitely put the U in BUM on that exhaust- also youll have to take the exhaust off to remove the engine. Keep it classy-ugly throw a pepper pot muffler on it! That suspension worked out surprisingly well, super low CG, excited to see what comes next on this project.
I like when Will says things like "baller as heck"and doesn't use vulgar language because I like to watch your channel with my kids. I also love seeing Taylor get more into the action and doing some work. He's grown on me 😂.
ive never seen someone weld a pillow block to something yall are wild for that, also no chain adjustment is a strong choice. the build looks awesome though
Nice, Will! Take the baffle out of that exhaust and put a bigger rear sprocket on it!
the fact no one picked up on the throttle working "Floorlessly" pun is diabolical
This is definitely the best work from you guys. You could have offset the engine slightly to the right rather then offset the axle. Or even if the the engine was forward.
he only recommendation i have to to offset the engine to the right next time
Fix the brakes, and the belt so it won't spin [the scream...] place the tank above the engine... it doesn't have a gas pump... the carb is gravity fed... and you'll have a great machine Will... I like the geometry... this thing looooves to turn... and you haven't see it's potential yet!...
Just keeps getting better and better.. Love it buddy
Thank you!
Sounds and looks awesome!!!
Super proud of you guys, great content.
you know what else is massive
I have never seen anything like it. ❤❤❤
That thing rips great job guys have a groovy one
100 mile challange!
Sheeeeeyit i didn't know my guys a fellow raiders fan! I cry with you my friend lol lets hope ole pete can save us.
When you're driving it around I'm getting *stronk* Odyssey vibes. GOOD JOB!
this is pretty awesome. the first actually sorted vehicle coming out of ol north spokompton. Good shit bois
Sweet ride
You could mount the jack-shaft on the chassis, right near the pivot of the swing arm and mount the motor "floating" off the rear of the frame( not on swing arm). may just need to add a chain tensioner, that way the motor doesn't bounce around when riding, and ride quality will be so much better!
Not cooked just RAW goodness - well done dudes!!! Keep it clean, the sponsers will come, the viewers will come.
This is my childhood imagination coming to life
Haha that awesome that’s the idea!
Premium dude!! Loving these video series all one one project keep it up guys
That thing is effing sick!👌💯
That thing sounds so good
Nice build guys
That is looking super cool!!
Best build yet guys ! Keep them coming !!!
Grab a pull wagon and cut it onto a Ute bed for the coupe over the motor. Awesome job!!
Zoom Zoom! Looks like a fun time.
Love the full exhaust!! Looks like the belt might be too tight
Y’all need to put a truck bed on it looks like perfect pickup length 😂🎉
Put the 1000 in it, great build guys🧡💯
That's amazing, though I think you should probably have mounted the engine to give the belt just a bit of slack when the drive pulley hasn't begun engaging yet. That way it won't try to roll away at idle.
Yeah, either that or a slightly longer belt.
U guys honestly make my day dude im 22 about yalls age and back in the day i Watched the Barbie jeep and it gave me the idea to make a mower with atv suspension and 24hp vtwin lawn mower engine I don’t have a atv frame yet but if u guys want I could send picks and stuff of my idea maybe u guys have the money to do it better than I could , but Im always waiting on the next video and keep making cool stuff 😎
fire stuff y'all, the grind'll pay off sooner than you think. Be sure to keep up the quality and try not to rush too much
It’s definitely more fun to take a lil more time on the projects 😅
How much i would love that thang
Love the fact that just like when he was at grind hard he’s robbing parts for the next build this is why I watch I also do the same thing with my garage builds
You know what would be awesome? If you spent some time making it premium, and then built a second one exactly the same - or used the police car version!
Imagine ripping two of those together - they could be your signature vehicles.
Love the RAIDERS hoodie!
Taylor's face matched the front of the Coupe lol
You know, Matt! Great guy, great channel!
You should weld a bar on each side above the door. That way when you climb in and sit down you can lower your body and support your weight. Since the doors aren’t too strong. Paint it yellow. Look great
I’ve watched the other two videos, I love this thing, I think you should widen the back wheels out to match the front, it looks alittle weird right now with the front way wider than the back. I think a little box around the engine could look cool, like a truck as some other comments said
Love you guys my favorite UA-cam channel you guys make me think outside the box
Thanks man that means a lot!
No problem just got my go kart fixed and that thing rips it took a lot. I wouldn’t have done it without you guys.
Love the builds and the channel....just some advice.....stop cooling your welds with water when you rapidly cool heated metal it weakens the metal and it will eventually fail instead of H2O use quenching oil or a sponge and dab it. Keep the projects coming man you guys are killing it!
Nice work guys..that engine is not 30hp by the looks but it still goes pretty good for wot eva hp it out puts.
WELL DONE GUYS , LOVE IT
Great work
I love Matt’s videos!!
Hope to see him more in the channel!
Maybe join?
Fellas, make sure the gas tank vents. That could for sure mess up your day chasing weird possibilities.
All luv from Kenya. Subscribed
You guys are getting better and better
Grind hards struggling without you
remember me when yall are stinkin famous
Hey Bum, I've been watching for a good bit. But I think you should add 2 metal pipes connect to the roll cage so if you do roll you don't get crushed.
Looks great, moves great!
Consider changing that muffler out, looks like it would restrict this engine. Maybe add a crossbrace on the rollcage?
This is sick, but that's a crazy amount of unsprung weight!
You shouldn't have a rear shock, it should be like a truck frame w/ the engine in the bed.... That would make this ride so much better and would give you more room for the engine and stuff. 😁👍
YES! So much fun. Love the American flag on the sleeve. Keep it up.
So fucking impressive guys :D Definitely your most premium build so far! Looks ridiculously fun!
Coops looking great the only thing I suggest to do is build a shield around the belt just in case it blows it don’t smack you guys in the back of the head!
Make sure that your center to center measurement for the pulleys is correct so you will get the most gearing out of the cvt
One of my new favorite channels. It's genuine content. 2 thumbs up, gentlemen.
Top notch content 😚👌
I think this needs to take a trip around Ethan's track. Maybe a GHP and BUM video collab?
⛑️SAFETY FIRST!!!
I notice you guys doing welding and torching by the entrance often. I also notice you guys working with fuel there too. You also store what appears to be fuel and batteries by the front door. If you guys have a fire emergency at the front, how do you escape with no other exit? In my state it would be illegal to have a building without 2 exits, other than for storage, just for this reason. Hate to see anything happen to you guys that could have been avoided.
PS LOVE the channel!
✌🏻🥰
thing looks EPIC
Definitely should build a bed around the motor so it looks like a truck!
Cvt belt needs to be a little bit loose. Everything is nice 🔥🔥
this should definitely be named the crazy coupe.