On behalf of all weekend woodworkers, thank you for leaving in the mistakes and the commentary that all of us have but doubt that any UA-camr would have.
I love jigs, you can never have enough of them. I share my workshop with a car, so a jig like this means you can do some jobs without having to back the car out of the garage and put the table saw out. Nice work!
thanks for the design, its nice and simple. I would probably just delete the fence all together and make my blade gap big enough so I could see my board that I am cutting clearly from the top (like a chop saw), I would also elevate the saw track as high as the blade allows me to cut a 2" thick material if I need to (at least a 2x4 or 6).
I appreciate that you're willing to show your screwups that we all also have instead of just "now that we cut that piece perfectly" like a lot of channels do.
my partner loves watching ur videos . in fact thats what he does ALL the time ..EVERY ONE of them !!! Thank u for the free plans. u have provided the motivation for him to rekindle his hobby after 40 years!
I like the unfiltered footage of your mistakes, the humor you've added, and the terminology that is newbie friendly. I knew what "square" meant, but it's great that you explained what most people would overlook. All this AND free plans?! I can't wait for your channel to get the recognition it deserves!
Thanks. I made a similar jig, crosscut only, though smaller. Now I'd like it to do miters. Your instructions for how to make the miter part will likely work on my jig. Great video!
This is truly beautiful. I've decided that the best thing about a crosscut jig is that it's inherently 1000 million times safer than a tablesaw, with almost no safety risk at all with basic crosscuts. On a table saw, or radial arm saw, the blade faces upwards, is exposed, and has no retractable guard. Circular saws have a strong retractable guard that only exposes the blade once the saw is making a cut.
best video with all of the action; thanks for keeping the mistakes in, your plain and simple explanation and design is fantastic, I am building this now for use in my shop; retired now and looking to expand upon my woodworking skills and abilities, I don't have extensive woodworking tools, just a couple of skill saws and such so this tool will help me out tremendously! Thanks😶
I'm glad to see directions for how to make this using only the circular saw itself. and it's interesting to see how you could rip a piece of wood with the circular saw when it's too narrow to clamp.. I made a ripping jig for a circular saw which is just a very long crosscut jig (big enough for a 24" board), but I use wedges at one end to hold the narrow board under the slide. To keep the board from slipping sideways as the wedges go in, I position it, then clamp a block of wood snug on each side to keep the board in position. Then I slide a pair of wedges in (and a spacer board if necessary) until the board I'm cutting is snug. Triple check the distance at each end of the board, pegging off the edge of the slide. It's also interesting to me that you put the board at the far side of the jig; I've seen ones with the jig at the near side, which of course means you must clamp so it doesn't slide away from the saw. I'm going to have to go look at all the other videos I saw earlier.
Hello Fellow Wood Worker! I applaud you because not only do you explain well. You are human. A mistake was made and not edited out. Great Job & Project
I really liked the fact that you show what worked, why it worked and why it didn't and provided a suggested alternate fix for the problem. Great job. Well done.
I've watched this video several times over few months. I love the jokes, especially at 13:53 it makes me laugh every time. Thank you for informative video, nice plans and with a good humor.
Until now I have seen your video 10 times to understand all the steps and have not started making it yet --- lol. I think by the time I finishing making it I would have watched it may be 20 times🤣. The main reason I choose your design over others is because you gave free plan that makes its easy to make. GOOD JOB
Grove a channel on top of the rails and put a tape measure in it, will help to ,make sure your square each time. This is good shop addition-Thank you looking forward for more ideas.
using a tailor's tape glued and shellacked would work too. could even inlay it. two triangle blocks on the outside of the fence would alose do the trick.
One problem I see is that the forward rail should have a small chamfer on the bottom edge that the board butts up against so that sawdust doesn't affect the alignment to square. I never worried out it until the day it happened to me. Since then I always plane this chamfer and have had no problems since. Good video production, thanks.
Amazing video! love how you stuck with what you making the jig for and did not make a jig using miter saws and table saws that most people don't have:) All other videos say simple jigs for common tools yet use uncommon power tools XD Thank You!!!!!
I had the same experience when I was starting out...it can be pretty scary. All power tools are dangerous, but beginners have no business with a table saw.
This is an absolutely killer piece of gear! A guy I used to know built pool tables with a similar rig and a circular saw. He sold them to pool halls, and at least one to a very fussy player of my acquaintance, and he LOVES it. If you can make a perfect pool table, you can make an awful lot of other things, to..
Regards the racking of the fence... I used to use a Triton saw table with a similar issue (actually each end referenced independent of the other). My solution was to build a story stick with a movable slide. That way I could independently reference each end from the edge of the the saw table. Of course I've long since graduated to a proper saw table so this fix is a thing of the past but it got me through many a project.
Hi, fascinating build and I'll certainly try it myself. One idea to keep the rip fence parallel would be to make the end blocks say 3 inches long, this would prevent the "cross tracking". Keep up the good work.
3:20 Another option for you to explore would be to cut a scrap piece of wood to the exact length of the distance required between your front and rear fences. Secure one of the fences so it's flush with the edge of the plywood, then use your piece of "scrap" to make your two fences as close to parallel as possible. 19:30 To avoid this issue, cut the t-track to length, minus the length of a t-nut. This will allow you the ability to add, or remove clamps, and other hardware as needed for the life of the jig.
I built this and it works great. However, I have a suggestion for the fence. Put the T Track on the top of the rail, not the side. Then one does not need the side block. I find the thing drags and is hard to square unless the bolts are dead square. This would seem to solve this issue. When I get around to it, I will make this change. I really like the 45° angle feature. I saw a table with a variable angle feature but my skills are such that simple is better. Thanks for the video and plans.
What about using drawer guides? I see your hold down as basically a drawer. AND drawer guides prevent the drawer from racking. Just a thought. Hey great build. Thanks for your time and for sharing your talent/creation. Keep the faith.
You could also Just add marks on top of where the slide sits on each side so that you can just line up the slide with those. There are a lot of ways to "fix" that but really its up to the user I think. Great video btw !!
A couple of blocks glued to the away side of the adjustable fence, and fitting snug to the front and back fixed fence will increase the contact length of the fence, and all but eliminate the racking you have.. Also the blue angle clamps are fine for most instances, but some cheap right angle shelf brackets (modified accordingly to fit the task and installed pointing down) could also be used to pin a workpiece close to the fence.. Would also suggest taking a half inch off one end of the T-track in the adjustable fence to allow the easy removal of T-bolts/clamps..
always like looking for double duty jig concept ideas, for small shop. one accurately made prototype makes it automatic for trick out ideas to play with. Forward T track could be a T square head French cleat edge runner thing, no racking . drill hole in end to slip in/out buried track. plenty of do-dads and thingies can be mounted on the fence ideas to play with. Little longer circular saw sled to allow blade to clear, only cutting ply and small stock could down size the saw and dedicate it to the sled. short landing extension for beginning the saw motion. Plenty to play with.
Hi Tommy Fantastic Videos Very Good Precise Explanations. THANK YOU Good to see someone else cutting wood the wrong sizes As I Do Frequently STAY SAFE Best Wishes From the UK Steve B
Lots of lessons here in building from scratch. Kudo's for taking an existing tool and making it multitask! For accuracy, I still think a table saw is the ticket. I think I'd find an older one that needed a little restoration that could be had for $75 or $100. A little work cleaning things up can get some of these older (and decent quality) table saws working great and is worth the effort. Some of the older stuff is better quality than mid quality new.
You always provide concise detailed information and easy to follow directions. Thank you 😊. Peace and good fortune and good health to you and your family.
Here I am, focusing on the project steps, getting ready to take note and maybe customize to fit my needs... and I hear the muzak version of "We Got The Funk" in the background? Thank you, Tommy. LOL
I have a table saw, circular saw and a track saw. Nonetheless this is phenomenal and I can use a cutting station. I can bring this to a project and not have to wait to go back to the shop to cut small pieces. Sometimes I end up cutting oversized pieces and have to either route or sand down to get the proper fit. This can cut time. Thank you. FYI You can also fit this with speed blocks. Sometimes all you need to cut is small pieces that doesn't need to reference square to the entire length of the station. Remove the fence and make some speed blocks you can attach to the t-track, similar to a miter saw station.
Great timing I need to build a Crosscut Jig for my Circular Saw. My 1st one has a lot of mistakes. Also I'm not sure if it is really square. Thank you very much and hope you have a great new year.
You could use a dovetail joint on the ends of the fence. That way when you tighten the clamping bolts you are pulling against the strength of the joint.
I just read Ryan's fix on the rip fence. Another quick method would be get a couple of small metal rulers from Harbor Freight and cut a groove on the top and bottom fence and screw them in, this way you won't have to measure anything but line up the fence according to the ruler marks.
Love this plan. I'm going to make it for my Dewalt & Ryobi cordless saws. and just a thought, have you thought of applying paste wax to the track for the saw? Would help it to slide easier. And possible the rip fence as well. Thank you for the plans, too. Great job
A saw guide with only wood is cheap, but when you add T track, it will become much more expensive. You can add or remove ruler, lock stoppers, clamps, and protractor to the T track, so you don’t need a piece of popup bar for 45 and 90 degree angle. Instead, you can adjust the lock stopper or protector for angle cut.
Wonderful design and execution! I wonder if this would still work well if it's built taler to take more advantage of the saw's depth of cut? Right now the cut height is 2" max I believe, which can be limiting
Thanks! Yes, you could absolutely make it taller. With a 2x2 fence you're limited to 1 1/2" of height. You could stack a 1x2 and add about 3/4" or, if you have a planer, plane something down to the thickness that will fit the depth of your saw.
This is an amazing video! You do a great job on your instruction and explanation. One thing... I can't get the free plan sent to me. I've tried twice and it's not showing up in spam or any other folder... is it still available?
Great jig and explanation, thanks for the great video. If you wanted to make longer rip cuts than the 2ft base, can you modify this and build it longer between the front and back fences? Any safety issues with ripping longer pieces that way? Thanks
Tommy, I'm pretty sure we have the same circular saw. I think I have a better blade installed, though. I've been using a Spyder TCG combination blade. Eats through anything, keeps my edges smooth and, cuts without tearout.
@Out of the Woodwork - I didn't see any video on restoring the table saw - do you have any videos that discuss it at all? Looks like you did a pretty awesome job.
@@OutoftheWoodwork I have gone to my local rockler store once to grab a shelving jig guess i have a reason to go back again sweet my wife loves rockler
Wonder if this will work with my truhvl cordless wormdrive skilsaw or my Milwaukee m18 worm style rear handle circular saw or even my dewalt 60v flexvolt circular saw
Great job and I am on my way to get the supplies to build this out. Quick question - did you get chance to fix or find better solution for the fence and keeping it square ?
I likely won't try to improve upon the fence since it's glued in place, but I do have a video about to release on better T track clamps for the fence. I would encourage you to work on a solution because it would be much more convenient. Let us know if you design something that keeps it square!
Thank you for the plan. These are area gold mine for any wood worker. At 83, I really need safer and easier tools. By having these jigs, there should also be savings by reducing waste. Finaly please send me instructions where to send a gift to support your channel. . .
Any thoughts on other cheaper woods that could be used in this project? A 1 x 8 x 8 piece of red oak in canada at home depot costs over 60 bucks making thus a pricey project with everything else involved.
You can even use construction grade lumber if you want to. I would try to find some more affordable hardwood as it will last longer and I find it more enjoyable to work with.
I keep thinking how important a Table Saw is. Honestly not that much. If you mainly build Office Furniture and work with Melamine covered Particle Board like I did, you use mostly a Plate Saw to cut each piece into size and then use a Biscuit Joiner to create the connections. In a home workshop setup, you are allot better served with a good Track Saw which helps you in combo with a big working table to break down sheet plywood plates. Yeah you can do allot cuts on a table saw... like the ones for connections you see allot done here on UA-cam Woodworking channels... however often times that is not the most economical way to connect wood. It might be a very sturdy connection... but another one would have served as good. And a Table Saw can be pretty dangerous too.... especially in untrained hands. Some jig like this is perfect for any cut that might be pretty risky to do on a Table Saw. And you could also work it into a 45degree one.
Get the Free plan: www.outoftheww.com/project-plans
Stick around for the overly dramatic montage at the end to see it in action!
On behalf of all weekend woodworkers, thank you for leaving in the mistakes and the commentary that all of us have but doubt that any UA-camr would have.
I came to the comments to say the same thing. How many times have we forgotten to measure twice, cut once, and immediately regretted it!
Thanks for leaving the mistakes in. We learn a lot from them too. It also makes me feel a little more normal.
I love jigs, you can never have enough of them. I share my workshop with a car, so a jig like this means you can do some jobs without having to back the car out of the garage and put the table saw out. Nice work!
thanks for the design, its nice and simple. I would probably just delete the fence all together and make my blade gap big enough so I could see my board that I am cutting clearly from the top (like a chop saw), I would also elevate the saw track as high as the blade allows me to cut a 2" thick material if I need to (at least a 2x4 or 6).
I appreciate that you're willing to show your screwups that we all also have instead of just "now that we cut that piece perfectly" like a lot of channels do.
There are plenty to show!
my partner loves watching ur videos . in fact thats what he does ALL the time ..EVERY ONE of them !!! Thank u for the free plans. u have provided the motivation for him to rekindle his hobby after 40 years!
I love hearing this! Thanks for sharing this and making my day!
I like the unfiltered footage of your mistakes, the humor you've added, and the terminology that is newbie friendly. I knew what "square" meant, but it's great that you explained what most people would overlook. All this AND free plans?! I can't wait for your channel to get the recognition it deserves!
Very kind of you...thanks so much!
Not only sharing your wood working skill, but I know how hard it is to make a good video. Must be pretty good to watch to the end. Thanks.
Thanks for showing errors as well as providing the plans for free. Good human!
The router tone at 2:50 matches the music soundtrack. (lifts glass a la DiCaprio) Well done, brother.
Thanks. I made a similar jig, crosscut only, though smaller. Now I'd like it to do miters. Your instructions for how to make the miter part will likely work on my jig. Great video!
I’ve watched probably 20 of builds similar to this to find one that really stands out and this is probably my favorite design so far
This is truly beautiful. I've decided that the best thing about a crosscut jig is that it's inherently 1000 million times safer than a tablesaw, with almost no safety risk at all with basic crosscuts. On a table saw, or radial arm saw, the blade faces upwards, is exposed, and has no retractable guard. Circular saws have a strong retractable guard that only exposes the blade once the saw is making a cut.
best video with all of the action; thanks for keeping the mistakes in, your plain and simple explanation and design is fantastic, I am building this now for use in my shop; retired now and looking to expand upon my woodworking skills and abilities, I don't have extensive woodworking tools, just a couple of skill saws and such so this tool will help me out tremendously! Thanks😶
Best video I've seen in years for this jig. Thank you for your free plans and sharing. Very much appreciated!
I'm glad to see directions for how to make this using only the circular saw itself.
and it's interesting to see how you could rip a piece of wood with the circular saw when it's too narrow to clamp..
I made a ripping jig for a circular saw which is just a very long crosscut jig (big enough for a 24" board), but I use wedges at one end to hold the narrow board under the slide. To keep the board from slipping sideways as the wedges go in, I position it, then clamp a block of wood snug on each side to keep the board in position. Then I slide a pair of wedges in (and a spacer board if necessary) until the board I'm cutting is snug. Triple check the distance at each end of the board, pegging off the edge of the slide.
It's also interesting to me that you put the board at the far side of the jig; I've seen ones with the jig at the near side, which of course means you must clamp so it doesn't slide away from the saw. I'm going to have to go look at all the other videos I saw earlier.
You have a new subscriber.. I like the way you explain and do things and of course I love that you include the out-takes. Thanks Dude!
Enjoyed your video and appreciate your efforts. Still chuckling over " that was educational". I'm always adjusting design for something I missed.
Hello Fellow Wood Worker! I applaud you because not only do you explain well. You are human. A mistake was made and not edited out. Great Job & Project
very good jig save a lot of time and cuts down having to bring out a mitersaw for small cuts thank you
I really liked the fact that you show what worked, why it worked and why it didn't and provided a suggested alternate fix for the problem. Great job. Well done.
Thanks!
I've watched this video several times over few months. I love the jokes, especially at 13:53 it makes me laugh every time. Thank you for informative video, nice plans and with a good humor.
Amazing restoration of the table saw. Love the tutorials.❤
I like it! Good video... nice to see something that isn't silent perfection but an evolving idea that already awesome
Until now I have seen your video 10 times to understand all the steps and have not started making it yet --- lol. I think by the time I finishing making it I would have watched it may be 20 times🤣. The main reason I choose your design over others is because you gave free plan that makes its easy to make. GOOD JOB
😂. 👍
Grove a channel on top of the rails and put a tape measure in it, will help to ,make sure your square each time. This is good shop addition-Thank you looking forward for more ideas.
using a tailor's tape glued and shellacked would work too. could even inlay it.
two triangle blocks on the outside of the fence would alose do the trick.
Love that you provide free plans for people to make these jigs and helpful tools and the guide is awesome thanks Tommy
One problem I see is that the forward rail should have a small chamfer on the bottom edge that the board butts up against so that sawdust doesn't affect the alignment to square. I never worried out it until the day it happened to me. Since then I always plane this chamfer and have had no problems since. Good video production, thanks.
Awesome! Extremely easy-to-follow presentation.
Amazing video! love how you stuck with what you making the jig for and did not make a jig using miter saws and table saws that most people don't have:) All other videos say simple jigs for common tools yet use uncommon power tools XD
Thank You!!!!!
I had a kickback with a table saw and will not use one anymore. This is great for me. Thank you.
I had the same experience when I was starting out...it can be pretty scary. All power tools are dangerous, but beginners have no business with a table saw.
This is an absolutely killer piece of gear! A guy I used to know built pool tables with a similar rig and a circular saw. He sold them to pool halls, and at least one to a very fussy player of my acquaintance, and he LOVES it.
If you can make a perfect pool table, you can make an awful lot of other things, to..
Fabulous I can't wait to start work. Thanks
Regards the racking of the fence... I used to use a Triton saw table with a similar issue (actually each end referenced independent of the other).
My solution was to build a story stick with a movable slide. That way I could independently reference each end from the edge of the the saw table. Of course I've long since graduated to a proper saw table so this fix is a thing of the past but it got me through many a project.
Great video and great jig. Thanks!!
Thanks for the time and effort you put in this video it was really awesome and explain a lot of details etc and thanks for the free plans !
Hi, fascinating build and I'll certainly try it myself. One idea to keep the rip fence parallel would be to make the end blocks say 3 inches long, this would prevent the "cross tracking". Keep up the good work.
THanks for the build.
Framing squares aren't always square... need to check and calibrate it :) (can adjust its angle with a punch)
Thank you for this great contribution. Why not glue down a ruler on the top of both sides, so you see the difference as you adjust?
This is really useful, thanks for the content 👍
Great video and nice to see someone helping others with free plans. Thanks 👍
gr eat project and thanks for the free plan.
3:20 Another option for you to explore would be to cut a scrap piece of wood to the exact length of the distance required between your front and rear fences. Secure one of the fences so it's flush with the edge of the plywood, then use your piece of "scrap" to make your two fences as close to parallel as possible. 19:30 To avoid this issue, cut the t-track to length, minus the length of a t-nut. This will allow you the ability to add, or remove clamps, and other hardware as needed for the life of the jig.
thx for the free plans Tommy -- will let you know how it goes
I built this and it works great. However, I have a suggestion for the fence. Put the T Track on the top of the rail, not the side. Then one does not need the side block. I find the thing drags and is hard to square unless the bolts are dead square. This would seem to solve this issue. When I get around to it, I will make this change. I really like the 45° angle feature. I saw a table with a variable angle feature but my skills are such that simple is better. Thanks for the video and plans.
great job man.. Really lke this idea
Thank you for the plans
What about using drawer guides? I see your hold down as basically a drawer. AND drawer guides prevent the drawer from racking. Just a thought.
Hey great build. Thanks for your time and for sharing your talent/creation. Keep the faith.
You could also Just add marks on top of where the slide sits on each side so that you can just line up the slide with those. There are a lot of ways to "fix" that but really its up to the user I think. Great video btw !!
A couple of blocks glued to the away side of the adjustable fence, and fitting snug to the front and back fixed fence will increase the contact length of the fence, and all but eliminate the racking you have..
Also the blue angle clamps are fine for most instances, but some cheap right angle shelf brackets (modified accordingly to fit the task and installed pointing down) could also be used to pin a workpiece close to the fence..
Would also suggest taking a half inch off one end of the T-track in the adjustable fence to allow the easy removal of T-bolts/clamps..
This is one of the best crosscut jig designs I’ve seen but I do worry about visablity - might try using angle iron for the slide.
I love my table saws but you right where there's a will there's a way. nice project.
always like looking for double duty jig concept ideas, for small shop. one accurately made prototype makes it automatic for trick out ideas to play with. Forward T track could be a T square head French cleat edge runner thing, no racking . drill hole in end to slip in/out buried track. plenty of do-dads and thingies can be mounted on the fence ideas to play with. Little longer circular saw sled to allow blade to clear, only cutting ply and small stock could down size the saw and dedicate it to the sled. short landing extension for beginning the saw motion. Plenty to play with.
Thanks a lot for sharing your job. I really liked how it was finished. Greetings from Mendoza, Argentina
Cheers man, in the UK, got the plans and going to give this a go!
Only thing that'd be easier would be to stick the metric on the plans too.
Hi Tommy
Fantastic Videos
Very Good Precise Explanations. THANK YOU
Good to see someone else cutting wood the wrong sizes As I Do Frequently
STAY SAFE Best Wishes From the UK
Steve B
Thanks 👍
excellent work mate, clearly explained and perfect for just the home stuff i want to do
cheers
Lots of lessons here in building from scratch. Kudo's for taking an existing tool and making it multitask! For accuracy, I still think a table saw is the ticket. I think I'd find an older one that needed a little restoration that could be had for $75 or $100. A little work cleaning things up can get some of these older (and decent quality) table saws working great and is worth the effort. Some of the older stuff is better quality than mid quality new.
some of us don't have a place to put a table saw--but we can put a jig somewhere!
You always provide concise detailed information and easy to follow directions. Thank you 😊. Peace and good fortune and good health to you and your family.
I always appreciate your encouraging comments!
@@OutoftheWoodwork 😀
Superbe projet, réalisé avec soins et qualités des matériaux employés.
GOOD JOB!
Thank you for the plans much appreciated take care and stay safe
see past the plans, plenty of opportunities to trick out.
These type of jigs are great when money & space are at a premium. Thanks 👍
Here I am, focusing on the project steps, getting ready to take note and maybe customize to fit my needs... and I hear the muzak version of "We Got The Funk" in the background?
Thank you, Tommy. LOL
😂 It sounds like it, but that would definitely get me a copy write strike
You are so informative tommy been digging your channel bro thanks for all the hard work and informational content
Great video, really good explanations thank you for sharing your talents
Great review
I have a table saw, circular saw and a track saw. Nonetheless this is phenomenal and I can use a cutting station. I can bring this to a project and not have to wait to go back to the shop to cut small pieces. Sometimes I end up cutting oversized pieces and have to either route or sand down to get the proper fit. This can cut time. Thank you.
FYI You can also fit this with speed blocks. Sometimes all you need to cut is small pieces that doesn't need to reference square to the entire length of the station. Remove the fence and make some speed blocks you can attach to the t-track, similar to a miter saw station.
I like that t track looks very nice 👌
Educational!😁
Great timing I need to build a Crosscut Jig for my Circular Saw. My 1st one has a lot of mistakes. Also I'm not sure if it is really square. Thank you very much and hope you have a great new year.
You too, Tony! Let me know how it turns out
You could use a dovetail joint on the ends of the fence. That way when you tighten the clamping bolts you are pulling against the strength of the joint.
I am coming back to my DIY hobby I started 2 years ago
Thank you.
Wonderful job!
I downloaded the plans. But living in Europe, I wonder if anyone has translated the measurements to dimensions you can find here?
I just read Ryan's fix on the rip fence. Another quick method would be get a couple of small metal rulers from Harbor Freight and cut a groove on the top and bottom fence and screw them in, this way you won't have to measure anything but line up the fence according to the ruler marks.
Great idea...I thought about putting one on the front fence to do quick measurements but it would be even better to have one at each end
@@OutoftheWoodwork 90 degree extensions on each end of the fence would prevent racking.
Nice looking jig...you ever try running a bevel cut (angle the baseplate and saw blade, not the wood) on this?
I haven't but I think it would work fine.
Love this plan. I'm going to make it for my Dewalt & Ryobi cordless saws. and just a thought, have you thought of applying paste wax to the track for the saw? Would help it to slide easier. And possible the rip fence as well. Thank you for the plans, too. Great job
Wax would work great!
Thanks for the plans.
A saw guide with only wood is cheap, but when you add T track, it will become much more expensive.
You can add or remove ruler, lock stoppers, clamps, and protractor to the T track, so you don’t need a piece of popup bar for 45 and 90 degree angle. Instead, you can adjust the lock stopper or protector for angle cut.
Wonderful design and execution! I wonder if this would still work well if it's built taler to take more advantage of the saw's depth of cut? Right now the cut height is 2" max I believe, which can be limiting
Thanks! Yes, you could absolutely make it taller. With a 2x2 fence you're limited to 1 1/2" of height. You could stack a 1x2 and add about 3/4" or, if you have a planer, plane something down to the thickness that will fit the depth of your saw.
Amazing
This thing is great. Nice job.
awesome!!!!!!!!!!!!!!!!
This is an amazing video! You do a great job on your instruction and explanation.
One thing... I can't get the free plan sent to me. I've tried twice and it's not showing up in spam or any other folder... is it still available?
Never mind!!! Found it!!!
Great! I was trying to see if I could tell what was going on. Glad you found it
Oh Thanks for the Plans of to timber store now
Have fun!
Great jig and explanation, thanks for the great video. If you wanted to make longer rip cuts than the 2ft base, can you modify this and build it longer between the front and back fences? Any safety issues with ripping longer pieces that way? Thanks
Yeah, you can just make it longer. At some point the slide will sag, but it's fine until that point.
@@OutoftheWoodwork Cheers, thanks
Será posible reproducir los vídeos en idioma español?
es posible en el futuro
Tommy, I'm pretty sure we have the same circular saw. I think I have a better blade installed, though. I've been using a Spyder TCG combination blade. Eats through anything, keeps my edges smooth and, cuts without tearout.
I definitely need a new blade
Sub'd bc I support the smaller channels who are grinding their way. Good work man. I'll get started on mine soon. 🤙🤙
@Out of the Woodwork - I didn't see any video on restoring the table saw - do you have any videos that discuss it at all? Looks like you did a pretty awesome job.
Thanks Jeff! I restored my table saw several years before I started my channel so no video, unfortunately. I wish I would have been able to!
We're did you get the clamps on the t track ?
You can find them on Amazon or at Rockler. Search T Track hold down clamps
@@OutoftheWoodwork I have gone to my local rockler store once to grab a shelving jig guess i have a reason to go back again sweet my wife loves rockler
Wonder if this will work with my truhvl cordless wormdrive skilsaw or my Milwaukee m18 worm style rear handle circular saw or even my dewalt 60v flexvolt circular saw
I LOVE YOU IDEA!
Instead of t- channel what about using drawer slides, the have bearings and set mount points.
Can you cut a 2x4 with that?
Great job and I am on my way to get the supplies to build this out. Quick question - did you get chance to fix or find better solution for the fence and keeping it square ?
I likely won't try to improve upon the fence since it's glued in place, but I do have a video about to release on better T track clamps for the fence. I would encourage you to work on a solution because it would be much more convenient. Let us know if you design something that keeps it square!
@@OutoftheWoodwork Thank you :)
Thank you for the plan. These are area gold mine for any wood worker. At 83, I really need safer and easier tools. By having these jigs, there should also be savings by reducing waste. Finaly please send me instructions where to send a gift to support your channel. . .
Any thoughts on other cheaper woods that could be used in this project? A 1 x 8 x 8 piece of red oak in canada at home depot costs over 60 bucks making thus a pricey project with everything else involved.
You can even use construction grade lumber if you want to. I would try to find some more affordable hardwood as it will last longer and I find it more enjoyable to work with.
maybe u can replace the side rails to extension drawer rails to reduce the wobbling.
I keep thinking how important a Table Saw is. Honestly not that much.
If you mainly build Office Furniture and work with Melamine covered Particle Board like I did, you use mostly a Plate Saw to cut each piece into size and then use a Biscuit Joiner to create the connections.
In a home workshop setup, you are allot better served with a good Track Saw which helps you in combo with a big working table to break down sheet plywood plates.
Yeah you can do allot cuts on a table saw... like the ones for connections you see allot done here on UA-cam Woodworking channels... however often times that is not the most economical way to connect wood. It might be a very sturdy connection... but another one would have served as good. And a Table Saw can be pretty dangerous too.... especially in untrained hands.
Some jig like this is perfect for any cut that might be pretty risky to do on a Table Saw. And you could also work it into a 45degree one.