How To Replace Front Lower Control Arm 2007-12 Dodge Caliber
Вставка
- Опубліковано 27 жов 2021
- Buy Now!
New Control Arm with Ball Joint from 1AAuto.com 1aau.to/ia/1ASLF00232
Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear. This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2007-2012 Dodge Caliber.
• Check here for more videos on the 2007-2012 Dodge Caliber • Dodger Caliber 2007-20...
This process should be similar on the following vehicles:
2007 Dodge Caliber
2008 Dodge Caliber
2009 Dodge Caliber
2010 Dodge Caliber
2011 Dodge Caliber
2012 Dodge Caliber
Tools you will need:
• Pry Bar 1aau.to/oa/1AXAA00020
• 18mm Wrench
• 21mm wrench
• 18mm Socket 1aau.to/oa/1AXAA00043
• 19mm Socket 1aau.to/oa/1AXAA00043
• 21mm Socket 1aau.to/oa/1AXAA00043
• 32mm Socket 1aau.to/oa/1AAST00003
• Straight Cutters
• 3/8 Inch Air Impact Gun
• Ratchet 1aau.to/oa/1AXAA00016
• Socket Driver
• Swivel
• Torque Wrench 1aau.to/oa/1AXAA00044
• Brake Parts Cleaner
• Copper Anti-Seize
• Rust Penetrant
• Center Punch 1aau.to/oa/1AXAA00055
• Floor Jack 1aau.to/oa/1AXAA00068
• Hammer 1aau.to/oa/1AXAA00091
• Jack Stands 1aau.to/oa/1AXAA00065
• Rubber Mallet 1aau.to/oa/1AXAA00413
• Wire Brush 1aau.to/oa/1AXAA00079
Subscribe: / @trq
Check out our playlist:
Dodger Caliber 2007-2012 1st Generation: • Dodger Caliber 2007-20...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Superb !!! Another excellent video by TRQ. Thanks.
Very good video and how you explain it in detail, thank you, your video will help me a lot
Thank you for the video!!!
This is asmr
Not sure if you happen to know, but would a 2008 Dodge Nitro be similar?
What was the purpose in removing the axle?
I didn’t take it out and I broke the transmission seal
It's never that easy lol ..
best video right here
I have a 07 caliber and I’m having a hard time removing the lower ball joint from the steering knuckle I took all of the bolts out used the pickle fork and I have no luck at all
What size sockets and wrenches please
How do you change camshaft synchronize
I'm doing this on the driver side now... so far the nut on the front is spinning and looking like I will have to cut a hole in the frame to get to it soon as how there is no access to the nut....🤣😂oh the joys of being a mechanic
1 1/4 socket fits the axel nut better
Guessing this is basically the same for the 12 avenger?
Seems like extra work removing the axle.
Yeah but it could break your transmission seal if you dont