FastLab Maintenance: Can-Am X3 Less Mess Oil Change
Вставка
- Опубліковано 5 жов 2024
- Are you tired of a messy oil change on your X3? Check out the less mess oil drain funnel for the Can-Am X3. Just reach in and drop the funnel into the hole in the skid plate and work from below. Once the funnel is in place you can get your tools up through the funnel to remove the two drain plugs. The drain funnel cups around the cross member to make sure it catches all the oil as it drips from sump.
This video would have been a lot better if you showed the funnel from the side once it was in place.
Agreed, we have a new design that fits with the Turbo RR subframe, so I think this is due for an update anyway. Also we loosen from the bottom but remove the plugs by hand from the side. It is much cleaner that way.
Just got one for my 2020 X3 XRC RR. Doesn't really fit. The funnel is at such an angle that the oil just runs to the front of the funnel and spills over onto the inside of the skid plate. The stem of the funnel barely fits into the hole, it's not long enough to extend thru the skid plate like the video show, and allows the oil to run along the underside as well.
Hello, there was an additional subframe added in the newer models but we did take that into consideration with the most recent update. It does require a little push to get it to pop into place in the cutout of the skid plate. For it to function properly, it does have to be fully protruding through the skid plate which then allows no oil to hit the skid. I'm guessing it did not get fully pushed into place.
Is there any Canadian dealers available for this funnel? Shipping says US only, but ill gladly pay the shipping charges to get something that works
Not sure if anyone got back to you, but email us at hello@fastlabco.com and we can get a shipped quote for you
Do you recommend rotella t6 for can am x3?
I recommend the can-am oil. I have used rotella t6, but feel it is best to stick with the manufacturers recommendation.
Nice to avoid a shiny skidplate