1967 Ford Mustang - Front Disc Brake Conversion - Time-lapse

Check out Alf's Mustang Parts on Amazon www.amazon.com/shops/mustangalf
Things I used in this video.
Basic mechanics tool set amzn.to/3ob7q2B
GoPro Camera & accessories amzn.to/2NwysVu
Lighting set up amzn.to/3ph54R2
As an Amazon Associate I earn from qualifying purchases
National Parts Depot List
2B134-1B BRACKET, Caliper, LH, to spindle
2B135-1B BRACKET, Caliper, RH
2B134-2AK MOUNTING KIT, CALIPER BRACKET
2B120-2AK MOUNTING KIT, CALIPER
2078-4B HOSE, FRONT DISC BRAKE
353390-SA ADAPTER, BRAKE FITTING, BRASS
Today at Alf's Mustang Garage, we swap the front drum brake for discs on the front of this 1967 Ford Mustang. This is a time lapse video meant for entertainment and will only display the drum removal and rotor and caliper installation.
Subscribe to the channel and click on the notification bell. / @alfsmustanggarage
We want your thoughts and comments. What kind of project are you working on? What Mustang are you daily driving?
Alf's Mustang Garage is not responsible for any mechanical or technical error that you may encounter when working on your own car. You are responsible for your own quality control and your own proper repairs.

[@blbenson8548]

Hey! Nicely done as usual!

[@AlfsMustangGarage]

Thank you!

[@EnthusiastCarHangar]

Great to watch!

[@AlfsMustangGarage]

Thank you!

[@Elevation_unknown81]

Should be done to all cars with front drums, love the way those pads change out without removing calipers.

[@AlfsMustangGarage]

Oh absolutely! Makes it very nice.

[@robertclymer6948]

Hello hello! Did you go with the Kelsey-Hayes 4 piston type? They look excellent. Thanks for sharing and Blessings from Motown.

[@AlfsMustangGarage]

Yes! I love converting to these factory style. Converts very easily, clears 14" wheels, has plenty of stopping power, can get replacement parts at my local auto parts store.

[@markhooper6674]

Hey Alf.. on the front disc brakes i see how to change pads but how do you push back the piston?? I can't find a video on changing pads ..

[@AlfsMustangGarage]

Aww there is a special tool for pressing the pistons back in their bores. I'm guessing most people just use a couple pry bars to push them back in.

[@dantehooks1603]

If you dont mind me asking, what's the cost?

[@AlfsMustangGarage]

for parts, you're about $1,300 USD for power disc brakes. For manual disc brakes, you're about $1050 USD.

[@dantehooks1603]

@@AlfsMustangGarage would it be worth it to just get the wilwood kit?

[@AlfsMustangGarage]

In my opinion, unless you're building a performance car, no. Those factory Kelsey Hayes 4 piston calipers are going to give you all the stopping power you need for a cruiser/daily driver. Plus when you need replacement pads, walk into any local part store for replacements.

[@Craspan]

👍

[@AlfsMustangGarage]

👍

[@TheRareCriticalThinker]

Where can I get the kit?

[@TheRareCriticalThinker]

Nvm. Read desc. Thanks!

[@FRestoMod]

I reallky like your videos...Will you please get a microphone.