Hi there I realise this in an old video but what did you use on the vinyl round the front door windows and rubbers ? Mines look tired and need restoration
It comes as standard with the M-Sport model. Not sure if it can be purchased separately or if another company products something similar sorry. Thanks for watching. Alan 😎👍🔔
Very impressive. I think now would be a good time to put out a comprehensive car washing video. I have used rain x on my Windows before but I have no idea what you used on yours. And I have tried treating my plastics and side molding with armorall.
hello great video.. i have few quest..why clean wheels before body...and when you apply product on car and then you washe it wouldnt that like cancel it if you know what i mean,i dont know nothing about this so..peace..
If I was in the UK I'd definitely swing by. Which pads did you use as I need to pick up some new ones. Rupes pads look nice but not sure which ones I need. My paintwork is comparable to this car. Thanks for your input.
Hi, Grant. That's Gtechniq C4. Their long life Plastic Coating. You can grab some here - amzn.to/2j84gMj Great product. Just make sure you remove all residue. If using on really, textured plastics use a thick pile Microfibre cloth to help in removal. Alan 😎 👍🔔
awesome video out of interest when you jacked the car up did you put the chocks on the front of the tyres also how many jacks did you use to Jack the car up and what was used on top of the jack above the jack like a black square thing
Hi Chris, Thanks for the feedback 😎👍🔔 At AMDetails we have a slope outside. Sloping away from the unit. So we chock the wheels on the opposite side to prevent the car rolling down the hill when not on the jack, and the hand break is off. I do hope the description makes sense. Alan
Hello Charlie, Just one jack used. You can jack the heaviest end ( most cars the front but Porsche etc. its the rear) til the opposite end lifts "cocks its leg) if you wish to returning the wheel as a cleaning technique. If not then just jack enough so that both arches raise to give better access for arch cleaning. Alan
I have the same car in the same colour. Had it a few months from new. Despite careful washing techniques I've noticed a few random fine scratches here and there. You think a once over with Scholl S30+ on an orange Scholl pad with a DAS 6 Pro would take care of it?
+Richard Hurr hi Richard. Weirdly I'm not actually that clued up on the Scholl range. Ford paint can be a funny one. Light hazing, wash marring and basic swirls are easy enough to remove with finishing to polishing stages. But the deeper stuff can be funny and that's when you need to get creative with what you have on the shelf. Such a rewarding colour though Sir so I'm sure you will have fun. Alan 😎👍🔔
AMDetails I ended up correcting it with Meguiars 205 on a finishing pad. Came out easily enough. This paint is rather easy to marr though, no matter how careful you are. Thinking of getting it ceramic coated, hence why I'm watching this again lol.
Hello, Daniel. I believe the technique heps you to reduce waste, on application, and the rinse from bottom up more effective. Getting you more from your chosen snow foam. We explain it here. A more in-depth video follows in 2017. ua-cam.com/video/70oDKVe2Sa8/v-deo.html Thanks Alan
+LazyOldWoman its something we demo at every openday. Quite a simple technique all about lance control. But since puttinf the videos up and reaching a wider audiance we have had this question a few times. So it's on the list to cteate a 'how to' on using the pressure washer for door shuts. So keep an eye out for it 😎👍 - Alan
+AMDetails nice I'll be sure to keep an eye out. I want my car detailed but I think the swirls may be too much 😩 got some nasty stone chips on the front end too. The spirit blue paint on these STs are super thin!
what product are you using on the door shits, my z4 has pretty deep gullys for water removal in the trunk area and id like to find a suitable product and also for the door shuts too, you guys use a green spray and brush it on with a detail brush, any info on this please?? lovely car, i have a normal ST
+Bee W its our AM APC. Http://www.amdetails.co.uk/am-apc For greasy stains you can also use our tar remover. Http://www.amdetails.co.uk/am-tar Hope this helps. Alan
AMDetails thank you, also i saw a video where someone was visiting your site for detailing training, is this available to anyone? i am looking into starting i mobile valeting service with plans to add detailing services afterwards and the nearest i can find is coventry and since i live in scotland its a fair journey
Hallo Alan ! Kan I apply a carnubawax on my car a day after Crystal serum black ! I just want to protected even more since I did not afford an EXO coating. If I do apply it a day after my self with a rupes and a soft foam pad ! Will it work greit ? Or I shouldn't do that ?
+Jorge Villegas indeed. Apply Crystal Serum Light. Then instead of EXO you can use your favourite wax. Applied by its instructions 😎👍🔔. Hope this helps
Hey- great video man. Love the attention. Can you tell me if you guys sell the brushes that were used on the wheel spokes and then around the gas cap area? Many thanks
Just use hogs hair brushes. Should be able to find some for much less than £25, which seems to be the going rate on most detailing supply sites. I've seen sets for £7-10.
AMDetails Hi Alan, in the description for this video you refer to the work being carried out as a 'Single Stage' Detail. Is this the same as, what some people call, a 'Correction' Detail?
+David Marshall potentialy David. It's all different depending on what the company calls "their service" Our single stage is a single pass with a abrasive compound to refine the finish of the car as much as possible with this one Individual pass. Our enhancement is a two stage service. Correction 3 passes plus. Possible vague but I hope it helps. Alan
Thanks for the quick reply Alan. I thought that's what it might be but thank you for the explanation of your process. Is it possible to go further than this if a customer asked you to?
Hello there. In this video im using a lot of adapted things to try to see why people do it. It was a period where I was investigating why people change machines and did it, in fact, make any improvement to the finish on the cars or was it just adjusting tools to suit the user's style. So i will explain what im using in this video. BUT it's not what i would advise haha. Rupes LHR12 with an LHR15 Cap for my left hand. A kamikaze backing plate version 1 i think where the velcro glue would always overheat and come off. AGAIN WOULD NOT ADVISE ANY OF THIS IT WAS A NIGHTMARE But the pad and polish combination used on this vehicle im 99% sure would have been menzerna 2500 - amzn.to/34EacFp and Rupes yellow foam pad - amzn.to/2XywYNr Hope this helps Alan
Hi Nick. I like to pressure wash from the bottom up and it helps to use the foam of a visual indicator of where your pressure washer lance has touche the car. I try to explain it in this Snow foam demo guide. - ua-cam.com/video/70oDKVe2Sa8/v-deo.html Enjoy - Alan
Hi guys, I use a G7X for vlogging amzn.to/2mJvXN1 canon 6 D for pictures/feature videos amzn.to/2lSrppJ Premier Pro for editing sir. Hope this helps Alan
Hello Sean. Our services can be found at www.amdetailscarcare.co.uk - Also a good site to eastimate Gtechniq Services is www.gtechniq.com/service Thanks - Alan
Thanks Dale. There are many professional guys around. Do a quick google and read the reviews im sure you will find a detailer that suits your needs. - Alan
AMDetails lol, I was just trying to say that you can never make a white car pop like a dark coloured car. Wash my car and it _looks_ nice, detail my car and it _feels_ nice. :(
Single stage is one single machine sessio to remove as much as possible but the main focus is on getting the most from the paint rather than defect removal. Rupes Yellow pad - Menzerna 2500. Alan
Hi Jordan, A Medium vehicle with all the bolt on and Gtechniq Crystal Serum Black (7 Year Guarantee) is £797.00 the Gtechniq estimator can be found here - www.gtechniq.com/service. Hope this helps Alan
Hey Kagan, Great questions. We like to clean up the arches and wheels as far as possible on the car first. One it keeps inside the bay nice and clean. But also means when we are man handling the wheels we are not rubbing dirt into them with our hands etc potentially causing more damage than required ( Gloss Black Wheels). I can see how people would think .."how un-efficient" But we allow for everything in our pricing so the extra step we can take for the customer the better. Thanks for checking us out. Hope this helps. Alan 😎👍🔔
Fair enough, it makes the job of cleaning them off the car less nasty if they aren't filthy. Each to their own of course, if I was doing a wheels off job, the most I'd do before they come off is maybe throw a little dragon's breath on to get the absolute worst off, pressure wash that off and do the main clean off the car.
Exactly Sir, This is why when I teach people or give out our guides I mention this is the AMDetails Way. Take from it what you like and apply this to your wash technique. For example. We would not use an Iron Fallout based chemical on a wheel without first using a normal wheel cleaner. So as to reduce the amount of reaction that happens. Firstly we would rinse with water to get the loose brake dust off. Use a wheel cleaner to remove brake dust. Then only use an iron fall out remover if.... *Carrying out protection, so we want to remove all contamination before applying protection. *We find staining or signs of contamination then we would use the Fallout Remover to eliminate this. This then helps to reduce the reaction, and it only happens where required instead of being used to clean general road film and brake dust. Depending on the chemical used, the reaction can be quite intense and to be used as a general cleaner could cause damage if repeatedly done over time. I hope this helps Sir, I look forward to creating the How to series and showing you all how we do things here + our tips and tricks. Alan
Exactly right! Anything I've learned about detailing, I've learned from your channel or others like it. It's great that you and others are sharing your skills and knowledge rather than trying to fence it off. Looking forward to your next video.
Phenominal attention to detail! Best in the business!!!! Loved this style of video too, showing each stage of the process! Keep up the good work!
Thanks Chrissuvy!
Amazingly detailed detail! I loved that you jacked the car to clean the wheels and the arches!
Looks mint Alan. Cheers for the snow foam today, I'll give it a whirl next weekend - "cool guy with beard"
Hey Cool guys with beard!
Great meeting you. So glad you enjoy the content. Have fun with the Foam.
Alan
This is totally amazing...You guys are doing a great job.
Thank you so much - +oftentse pheto
Alan
Unreal.. Keep up the awesome work guys!, I'm a keen amateur valeter, hoping to soon venture into detailing. Love seeing videos like this 😊
+Scott Miller thanks Scott. Hopefully it's feeding your drive. We are here to help with your transition with tips, products and training
Loved this one!!! Great job!
Thanks Detailgirl7
Hi there I realise this in an old video but what did you use on the vinyl round the front door windows and rubbers ? Mines look tired and need restoration
Great video. What kind of steering wheel?
It comes as standard with the M-Sport model. Not sure if it can be purchased separately or if another company products something similar sorry.
Thanks for watching.
Alan 😎👍🔔
Awesome video man. Came from Jimbos podcast, can't wait for more!
Welcome, Tony!,
Great having you here. The Team and I are on a small break. Be back soooooooon
Very good video, the first I've seen that does it correct and with a whole lot of common sense! Excellent work.. keep it up.
Thanks SYO! Really appreciate it - Alan
Very impressive. I think now would be a good time to put out a comprehensive car washing video. I have used rain x on my Windows before but I have no idea what you used on yours. And I have tried treating my plastics and side molding with armorall.
+Cohunnamatta its coming sir. Once show season is over we will have more filming time.
hello great video..
i have few quest..why clean wheels before body...and when you apply product on car and then you washe it wouldnt that like cancel it if you know what i mean,i dont know nothing about this so..peace..
Stunning work as always
+manxox Thank you 😎👍🔔
Hope I can get mine to look half as good as this, great result.
+Jokebre here for any advice / training if required 😎👍🔔
If I was in the UK I'd definitely swing by. Which pads did you use as I need to pick up some new ones. Rupes pads look nice but not sure which ones I need. My paintwork is comparable to this car. Thanks for your input.
What did they use on the black trim around the door windows?
Hi, Grant.
That's Gtechniq C4. Their long life Plastic Coating.
You can grab some here - amzn.to/2j84gMj
Great product. Just make sure you remove all residue. If using on really, textured plastics use a thick pile Microfibre cloth to help in removal.
Alan 😎 👍🔔
awesome video
out of interest when you jacked the car up did you put the chocks on the front of the tyres
also how many jacks did you use to Jack the car up and what was used on top of the jack above the jack like a black square thing
Hi Chris,
Thanks for the feedback 😎👍🔔
At AMDetails we have a slope outside. Sloping away from the unit.
So we chock the wheels on the opposite side to prevent the car rolling down the hill when not on the jack, and the hand break is off.
I do hope the description makes sense.
Alan
thanks is there only one jack used?
Hello Charlie,
Just one jack used. You can jack the heaviest end ( most cars the front but Porsche etc. its the rear) til the opposite end lifts "cocks its leg) if you wish to returning the wheel as a cleaning technique.
If not then just jack enough so that both arches raise to give better access for arch cleaning.
Alan
I like the brushes you use for the wheel wells. Where can I find that to purchase?
Indeed Sir the EZ Brush range. get in touch via email and we can calculate postage for you sir.
Fantastic video need to get my Fiesta it to yous to get it done keep up the good work
Thanks Callum,
Hope you enjoyed the feature video. We look forward to hearing from you. Alan 😎👍🔔
I have the same car in the same colour. Had it a few months from new. Despite careful washing techniques I've noticed a few random fine scratches here and there. You think a once over with Scholl S30+ on an orange Scholl pad with a DAS 6 Pro would take care of it?
+Richard Hurr hi Richard. Weirdly I'm not actually that clued up on the Scholl range.
Ford paint can be a funny one. Light hazing, wash marring and basic swirls are easy enough to remove with finishing to polishing stages.
But the deeper stuff can be funny and that's when you need to get creative with what you have on the shelf.
Such a rewarding colour though Sir so I'm sure you will have fun.
Alan 😎👍🔔
AMDetails I ended up correcting it with Meguiars 205 on a finishing pad. Came out easily enough. This paint is rather easy to marr though, no matter how careful you are. Thinking of getting it ceramic coated, hence why I'm watching this again lol.
What product are you using on the door cards at 6:11 ? Mine on my focus are faded with white marks all over them
Hi Wildman thats Gtechniq C4.
amzn.to/2bXxlex
Hope this helps
Alan
Why are you jet washing the foam of from the bottom upwards??
Hello, Daniel.
I believe the technique heps you to reduce waste, on application, and the rinse from bottom up more effective. Getting you more from your chosen snow foam.
We explain it here. A more in-depth video follows in 2017.
ua-cam.com/video/70oDKVe2Sa8/v-deo.html
Thanks
Alan
Do you not worry about getting the interior real wet when jetting with the doors open?
+LazyOldWoman its something we demo at every openday. Quite a simple technique all about lance control.
But since puttinf the videos up and reaching a wider audiance we have had this question a few times.
So it's on the list to cteate a 'how to' on using the pressure washer for door shuts.
So keep an eye out for it 😎👍 - Alan
+AMDetails nice I'll be sure to keep an eye out. I want my car detailed but I think the swirls may be too much 😩 got some nasty stone chips on the front end too. The spirit blue paint on these STs are super thin!
Great Video!!! Love The Ford Power!!!
Thanks guys
what product are you using on the door shits, my z4 has pretty deep gullys for water removal in the trunk area and id like to find a suitable product and also for the door shuts too, you guys use a green spray and brush it on with a detail brush, any info on this please?? lovely car, i have a normal ST
+Bee W its our AM APC.
Http://www.amdetails.co.uk/am-apc
For greasy stains you can also use our tar remover.
Http://www.amdetails.co.uk/am-tar
Hope this helps.
Alan
Do you sell the brush that was used to clean the wheel barrels?
Indeed paul. the EZ GO Brush
www.amdetails.co.uk/ez-detail-brush-go-brush
Many Thanks
Alan 😎👍🔔
AMDetails thank you, also i saw a video where someone was visiting your site for detailing training, is this available to anyone? i am looking into starting i mobile valeting service with plans to add detailing services afterwards and the nearest i can find is coventry and since i live in scotland its a fair journey
Of course Paul,
Drop us an email or get intouch via our facebook page
facebook.com/amdetails
Alan
Nice car. Even better swirls
Hallo Alan ! Kan I apply a carnubawax on my car a day after Crystal serum black ! I just want to protected even more since I did not afford an EXO coating. If I do apply it a day after my self with a rupes and a soft foam pad ! Will it work greit ? Or I shouldn't do that ?
+Jorge Villegas indeed. Apply Crystal Serum Light. Then instead of EXO you can use your favourite wax. Applied by its instructions 😎👍🔔.
Hope this helps
What foam cannon was used? Thanks!
Hello Nicholas, Either one we bought online or our old PA Snow Foam Lance. We are looking in to suppliers of lances as we speak. Many Thanks - Alan
Hey- great video man. Love the attention. Can you tell me if you guys sell the brushes that were used on the wheel spokes and then around the gas cap area? Many thanks
Hey Marko,
Indeed we do!
www.amdetails.co.uk/detailing-and-wheel-brush
Enjoy
Just use hogs hair brushes. Should be able to find some for much less than £25, which seems to be the going rate on most detailing supply sites. I've seen sets for £7-10.
AMDetails Hi Alan, in the description for this video you refer to the work being carried out as a 'Single Stage' Detail. Is this the same as, what some people call, a 'Correction' Detail?
+David Marshall potentialy David. It's all different depending on what the company calls "their service"
Our single stage is a single pass with a abrasive compound to refine the finish of the car as much as possible with this one Individual pass.
Our enhancement is a two stage service. Correction 3 passes plus.
Possible vague but I hope it helps.
Alan
Thanks for the quick reply Alan. I thought that's what it might be but thank you for the explanation of your process. Is it possible to go further than this if a customer asked you to?
Looked cracking alan and team
Thanks Graham
Wow, what a beautiful car! I like the blue and the smoke alloys very much. What is the exact name of this color blue by the way?
blue
Spirit Blue
Fairly sure its Spirit Blue Metallic Painton the M Sports. Thanks Sergio - Alan
What compound & pad did you use please? Thanks
Hello there. In this video im using a lot of adapted things to try to see why people do it. It was a period where I was investigating why people change machines and did it, in fact, make any improvement to the finish on the cars or was it just adjusting tools to suit the user's style. So i will explain what im using in this video. BUT it's not what i would advise haha.
Rupes LHR12 with an LHR15 Cap for my left hand.
A kamikaze backing plate version 1 i think where the velcro glue would always overheat and come off.
AGAIN WOULD NOT ADVISE ANY OF THIS IT WAS A NIGHTMARE
But the pad and polish combination used on this vehicle im 99% sure would have been menzerna 2500 - amzn.to/34EacFp and Rupes yellow foam pad - amzn.to/2XywYNr
Hope this helps
Alan
why did you jet wash it from bottom up ?
Hi Nick. I like to pressure wash from the bottom up and it helps to use the foam of a visual indicator of where your pressure washer lance has touche the car.
I try to explain it in this Snow foam demo guide. - ua-cam.com/video/70oDKVe2Sa8/v-deo.html
Enjoy - Alan
hey Alan what kind of camera and editing software are you using. thanks. and awsome work .
Hi guys,
I use a G7X for vlogging
amzn.to/2mJvXN1
canon 6 D for pictures/feature videos
amzn.to/2lSrppJ
Premier Pro for editing sir.
Hope this helps
Alan
AMDetails thanks Alan!!!
I'd like to see more of the correcting part of this detail. But good job, and good video.
Thanks Austin. More dedicated filming of correctional work is on route. - Alan
Awesome work guys. 👍🏼
Awesome job on a cracking little car. Hoping to get one of these soon! Also what is the song you used if you don't mind me asking?
Thanks Greg,
The song is a free one through UA-cam so we meet the regulations sorry.
Alan
Oh right okay. Do you have a link or name you can give me at all? Thanks
Wich is the brand of pressure washer?
The one in this video is a Kranzel Ultras. But we also run a Nilfisk Neptune. The Kranzel was just a loan machine.
Hope this helps
Alan
kränzle ?
Good camera work man, how long did this take to shoot?
We just shoot as we work .. The big time is in the Editing. Hope this helps - Alan
Mad Respect for you Guys
Thank you, +GJ Auto Detailing
How much is it to get this done?
Hello Sean. Our services can be found at www.amdetailscarcare.co.uk - Also a good site to eastimate Gtechniq Services is www.gtechniq.com/service
Thanks - Alan
I always give my cars the same detail attention but the next day it rains🤔
Everytime Roy. Every time. We feel your pain!
you guys are the best !! are you located in new jersey ???
Scotland. Not quite NJ.
Looks awesome
Thank you Buss
Good step by step presentation, awsome results as usual, its a shame your 500 miles from me.
Thanks Dale. There are many professional guys around. Do a quick google and read the reviews im sure you will find a detailer that suits your needs. - Alan
Brilliant video mate love the detail. Where can your products be found??
+lee munro thanks Lee. Http://www.amdetails.co.uk when the new site lau ches it will also show our detailers and resellers.
what do you charge for that kind of detail?
Hey Jeff.
Depending on your country the Gtechniq website is best for quotations.
www.gtechniq.com/service
Hope this helps
Alan
How do you detail a white car?
+AzNightmare exactly the same techniques. Polish may change but thats only due to paint type not paint colour 👍
AMDetails lol, I was just trying to say that you can never make a white car pop like a dark coloured car. Wash my car and it _looks_ nice, detail my car and it _feels_ nice. :(
Nice job
Thank you 👍🔔
Loving the videos. Was this a single stage machine polish and what pad/polish combo did you use?
Single stage is one single machine sessio to remove as much as possible but the main focus is on getting the most from the paint rather than defect removal. Rupes Yellow pad - Menzerna 2500. Alan
What a beauty
Thanks Klaas
Surely when you pressure wash inside the door shuts it's just going to creat a ton of overspray over the interior..
Great Question Scott. This is one of the most popular tips i show at our open days also. Will make a guide for it soon ;)
Many Thanks
Alan
Awesome ! Thank you soooo much
+Jorge Villegas no problem...Enjoy
😎👍🔔
whats the song name?
Sorry for the delay Danny.
Its available in the free music section of youtube and its called.
DJ Kimera - Cloud Up
Many Thanks
Alan
Awesome
Thanks 😎👍🔔
Can anybody give me the code of that blue - purple color?
Its Fords Spirit Blue
Tanks Joshua - Yes I'm lead to believe its Ford Sprint Blue. - Alan
Nice Ford. I think the odd color decals kind of ruin it... but that's just my opinion. Beautiful car regardless. Love that deep blue color!
mighty car mods music?
Generic free music from UA-cam gallery many channels will use it.
Thanks for watching.
Alan 😎👍🔔
haha ok, good video, i should really wash mine..
Drop us a line of you need any tips or advice. - Alan
If I got my car this clean I wouldn’t want to drive it.😄
Didn't show a walk round of the car after all ur work .
Yeah sorry Scotty. Early AMDetails before wheelie stool or walk around videos. ☹👍🔔
hi mate, excellent work never seen a m sport St before but looks sweet! you reckon you could message me regarding something business terms?
Sure just get intouch James - Alan
2:35 dogs like wtf ....LOL
Ha Ha Peppa is a bit Camera shy.
and his tuning, Rain 😎
M-Sport for the Win!
Really great attention to detail, fantastic finish! my question is how much does this package cost
thanks Jordan
Hi Jordan,
A Medium vehicle with all the bolt on and Gtechniq Crystal Serum Black (7 Year Guarantee) is £797.00
the Gtechniq estimator can be found here - www.gtechniq.com/service.
Hope this helps
Alan
super
+Nino Kinwurashvili thank you 😎👍🔔
Love the song 🤥
Why clean the wheels when you are going to be taking them off anyway? Why not just clean them off the car?
Hey Kagan,
Great questions. We like to clean up the arches and wheels as far as possible on the car first.
One it keeps inside the bay nice and clean. But also means when we are man handling the wheels we are not rubbing dirt into them with our hands etc potentially causing more damage than required ( Gloss Black Wheels).
I can see how people would think .."how un-efficient" But we allow for everything in our pricing so the extra step we can take for the customer the better.
Thanks for checking us out. Hope this helps.
Alan 😎👍🔔
Fair enough, it makes the job of cleaning them off the car less nasty if they aren't filthy. Each to their own of course, if I was doing a wheels off job, the most I'd do before they come off is maybe throw a little dragon's breath on to get the absolute worst off, pressure wash that off and do the main clean off the car.
Exactly Sir,
This is why when I teach people or give out our guides I mention this is the AMDetails Way. Take from it what you like and apply this to your wash technique.
For example. We would not use an Iron Fallout based chemical on a wheel without first using a normal wheel cleaner. So as to reduce the amount of reaction that happens. Firstly we would rinse with water to get the loose brake dust off. Use a wheel cleaner to remove brake dust. Then only use an iron fall out remover if....
*Carrying out protection, so we want to remove all contamination before applying protection.
*We find staining or signs of contamination then we would use the Fallout Remover to eliminate this.
This then helps to reduce the reaction, and it only happens where required instead of being used to clean general road film and brake dust. Depending on the chemical used, the reaction can be quite intense and to be used as a general cleaner could cause damage if repeatedly done over time.
I hope this helps Sir,
I look forward to creating the How to series and showing you all how we do things here + our tips and tricks.
Alan
Either way, can't argue with the results! Looks pristine! Keep up the good work.
Exactly right!
Anything I've learned about detailing, I've learned from your channel or others like it. It's great that you and others are sharing your skills and knowledge rather than trying to fence it off.
Looking forward to your next video.
Mate. You missed a spot
WHeeeeeeeeeeyyyy - Alan ;)
But it's a Fiesta?
A very unique Fiesta. Whats your passion Steven?