VIEWER SENT A MOTHERBOARD FROM THE UK FOR REPAIR || MSI B450 TOMAHAWK MAX AM4
Вставка
- Опубліковано 20 сер 2024
- My Tools:
DDR3 and DDR4 Post code tester (white ddr card): s.click.aliexp.... *
Tweezers: de.aliexpress.....
Soldering Station AIXUN T3A T245 B Set: de.aliexpress.....
JBC tips that i use: C245-906 (bought of a german retailer) , C245-030 (bought of a german retailer) , C245-908 amzn.to/47eHP05 * , C245-752 amzn.to/47BqxtO *
PCIE Post Card: s.click.aliexp.... *
Side Cutters: de.aliexpress.....
DDR3 DDR4 Data line Tester: s.click.aliexp.... *
Pre heater: s.click.aliexp.... *
Reball jig: s.click.aliexp.... *
needle probes: s.click.aliexp.... *
CH341A Bios chip programmer: s.click.aliexp.... *
Soder Wick: s.click.aliexp.... *
Microscope: s.click.aliexp.... *
Microscope Ringlight: s.click.aliexp.... *
Microscope Arm (used 3D printing to make it work, can provide an STL if needed): amzn.to/3R1hn48 *
Power supply: s.click.aliexp.... *
12V to 24pin ATX adapter: s.click.aliexp.... *
Components Tester: s.click.aliexp.... *
Hot Air: Some Quick 861DW counterfeit
The Flux i use sucks, so dont buy it lol
The Copper wire i use is 0.1mm Enameld wire, link is dead, but the wire wasnt great anyways
Oscilloscope RIGOL DS1054Z amzn.to/3R2aDmE *
Thermal Camera Seek Compact amzn.to/47hGeX6 * (I would check out the infiray P2 Thermal cameras to be honest if i wouldnt have already bought this one!)
Multimeter (cheap one for beginners, that i still use): UEZNIRN IEC61010-1 multimeter
UV light: amzn.to/40L0fD1 *
/ mainboard_m. .
Links marked with * are affiliated links and i get a small comission from them without you paying extra. (The * is not part of the link)
For any business inquiry :
Xorat.business@hotmail.com
I'm the guy that sent in the board :) Wow it never ceases to amaze me just how easy Mainboard Medic is able to find out what the issue is, A true professional ;)
Its crazy that one tiny little part would render the whole board not working, I'm unsure where those marks came from which looked like water marks, as i didn't notice it before, I'm wondering if during the flight condensation formed maybe?...Who knows! I'm just super happy that its fixed and wont become E-waste, Thank you very much Mainboard medic was a pleasure to watch and you're amazing!
One tiny part of a living organism - a tiny part of the bio-chemical and Bio-mechanical part of your body can fail and - and your life is over. CORPUS.
To understand it - you have to discipline yourself and read BOOKS for two
hours every day.
Read books by accomplished authors.
Read books on many subjects - even those subjects that are outside
of your sphere of interest.
Learn to focus and pay attention to detail.
Take notes of what you read - and where you read it - so you can return
to the source material and read more
Surround yourself with people who know more than you - and let them teach you
And be teachable.
Study to become a leader - set examples - instead of being a sheeple follower
led by the ignorant masses
Good luck and Good bye
No point in replying as I am seriously busy with more important matters to read replies. My time is valuable and NOT recoverable.
@@andrew_koala2974wtf man
Thanks UA-cam suggestion , send me to a very informative guy and pro guy ❤ keep up the good work
Yes audio! Thanks bro
Still an error in my editing in this Video, so dont mind the gap 10:45-11:30 . But i wont pull the video a second time!
Sorry guys!
Good job on the repair.
прикольный ремонт.лови лайк.напишу длинный коментарий пусть канал развивается
Еще как вариант я искал такую материнку потому что в борде не всегда есть эти обвязки микросхемы иногда по другому расположены или на борде все посадочные места заполнены резисторами а по факту надо 2 резистора.
ну както так\
удачи Вам и много много подписциков
Мира всем и мирного неба.Боже вразуми всех
Back in the days of Super Socket 7. I was upgrading the CPU Cooler, and with all my weight on the final screw, thud.!
Yes, I punched a 6mm (1/4") hole thru board and some smd components also.
Just out of curiosity, I thought lets see if it will turn on.
Don't ask me how, but it is still running perfect today as my nas, and it is overclocked.
There must be a Computer God or something...
That is close to a miracle!
Nice! Thank you 😊😍
Now is perfect✌️
NOTHING in existence on this earth is perfect.
Perfection CANNOT be achieved
We can ONLY strive for excellence in everything we do.
Make sure you learn that and teach it to others.
It will be ' wirth ' your time and effort Mr. Wirth
Now explain where the name benjamin comes from
and what it means
Note that benjamin is a combination of TWO words
explain what bin laden means.
The clue for you is - that there is a linguistic Semitic
connection between the two.
That is your homework for this week
Great insight I'm running into an issue with my asus z170 programing board, when I plug in the psu to it there's an led called "sb_pwr" it flickers / blinks,
I searched online people theorized it's the psu so I got a new one and it's still dose the same I tested with another psu the lights stay on but still when I try to jump start it nothing happens, also when I plug the psu in the board is oddly shocking hopefully that'll give you additional clue, my last hope now is to get a new cmos battery and hope it runs
That is the Standby voltage off the powersupply. Probably the 5VSB is shorted. Most commenly its either the SIO or the PCH. On off both should be getting hot on your board!
@@MainboardMedic much appreciated, do you recon it's fixable?
@@1JAKY If its the SIO yes, if its the PCH it doesnt make sense to do!
i had a dell laptop that was sent for repair at two places but unfortunately they disappointed me and i had to sell it for parts.
i have a rog strix board here and the pins in the sock has been damaged it needs to be replaced i understand the concept. but no way of getting the part, id love to send it it but the cost of repairing it was rediculas
Sadly i still cant repair that, i dont have the tools for it and also not the knowledge yet!
Many of the Aliexpress don't seem to be working for me. I'm from Europe, too, so there shouldn't be any issue.
Where are you located? Ive had that for multiple people, but i cant figure out what the problem is. Very sorry!
@@MainboardMedicI'm from Portugal 🇵🇹 🌟 and all the Links won't work for me to...
@@skysurfhf very sorry! I might inlcude the actual name off the product next to it, so you could google that, but it will take some time!
your link to the microscope on the description is not working. can you double-check? also what is the board viewer software and how did you get the file for it?
Will double check that, thank you! Its called Boardview.exe . I get most off my files from Discords like learn electronics repair or electronics repair school!
Nice video it really motivates me to do repair on my own. Do you have boardviews/schematic diagrams for MSI B450m Pro Max II? please 🙏
MS-7C52 VER 2.1
I always use the Learn electronics repair discord or electronic repair school discords!
Fixed
How so you tell what is popuplated in boardview
At the end of the description there is an x, that means it is not populated!
Audio!! :)
Where do you get your motherboard schematics for your boardview?
I either google them or discords from Learn electronics repair and also Electronics repair school!
Hey, How can I contact you directly?
E-mail in my description!
I have a Asus X670E-F that powers the RGB lights, but won't power up when the power pins are shorted. Don't know if you are interested in trying to fix an AM5 motherboard. If you would be interested trying to fix it for me, drop a message. Cheers.
Hey there, i sadly still dont won a AM5 CPU, because the chepest one is like 150€, so i sadly cant fix those yet!
@@MainboardMedic No problem. I'll keep fiddling with it. Keep up the informative videos.
what country are you in and how much do you charge please to repair amd motherboards
Contact me via my email adress in the description!
5 gig ram sticks?
Dont mind me talking out off my arse! I am using 3x 4GB and one 8GB stick!
@@MainboardMedic Typically ram be equal size pairs for peak performance. User should read the manual.
@@duotronic6451 Obviously i just use them to test that all the slots are working.
@@MainboardMedic For some reason I thought the customer sent the ram with the motherboard.
First of all….take of that ring when work with ac or dc powered circuit boards! Jeez