Thanks, guys. You inspired me to take advantage of the recent good weather here in Virginia and paint correct my 2014 Silverado using TW1&done. I used a medium-cut Hexlogic pad, 50-50 microfiber cutting pad with an inexpensive DA polisher. I followed up with some Griot's Garage wax applicator red pads and the results were stunning. No dust, no sour smell, just a deep base coat (Tungsten Metallic) shine. Following up with a "glass bottle" ceramic coating this weekend to show off that newfound metal flake. Kudos guys. You got me off my arse and that's no mean feat on a Sunday.
I used the One and Done yesterday on my car; using the 50/50 microfiber pad first (4 dots on the pad) and then used the black foam pad (4 dots on the pad). I tapped the pad over the area to be done, started the machine out at a 1 speed (using a Porter Cable machine) and then switched to 4 speed in a cross hatch; doing this way with the 50/50 pad. Then when using the black foam pad, I also tapped the pad over the area, started out with a 1 speed to spread, then changed to a 3 speed in a cross hatch. I noticed that with each pad and application, it was harder and longer to remove the compound; I had to use all three microfiber towels; and it wasn’t very translucent. What did I do wrong?
Hi Paul. It sounds like you might have too much product built up on the pad. Not sure of course, since we aren’t there, HaHa! Everything you’re doing sounds correct. Let us know if you figure it out. Thanks for watching!
Want to finish with Ceramic for UV. Can Pro 1 & Done be topped or should a different process be used to have the UV of Ceramic? Also, no machine; by hand - any tips?
Thanks for the question 6atlantis. By hand, you are right on with a medium density pad. We would have a lighter dense pad (usually more for polishing/not cutting) on hand as well, depending on your paint.
Hi Lisa. This Turtle Wax product will actually cut and correct. No fillers here. This note is directly from Turtle Wax: "Proprietary blend of high-quality precision platelet abrasives, removes up to 1000 grit paint imperfections for heavy-duty surface restoration" You can use this by hand or machine, the correcting ability will be much less by hand though. Thanks for watching!
Great question. There is no mention in the directions of an ipa wipe before moving onto your Last Step Protection, but are in the habit of always performing an ipa wipedown just to make sure we got every last bit of compound/polish off the paint. Thanks for watching!
Hi 09ThunderOne. We used the Adam's Polishes Swirl Killer 15mm to apply and work this product. The instructions don't mention hand application. (although this is a great idea for a quick video trial) Thanks for the question and watching!
Have great new year Humberto.just finished the passenger side of the black ram with 303 graphene yesterday.raining now,watching the rain just sheet right off.we both beat Shelly.🤣
@@keithknechg3217 that's great news. You must be really happy and satisfied because you have it well protected now. Just a matter of maintenance now. Happy Holidays and Happy New Year for your family, stay safe and healthy! 🥳👍🇵🇷
@@1stfrompuertorico568 yep thrilled.full prep 3 weeks ago,tw blackpolish with a da.24 hrs later tw black ceramic.24 hrs later 303 on 1/2 truck.2 weeks later303 on the passenger side.obviously washed between the delayed applications.no garage,my boat is better protected with a steel building. 😂
@@keithknechg3217 303 Graphene! Yes! We have a great short clip of the water sheeting action with the Adam's Spray Graphene when giving the Charger it's 1st bath after application. We'll be sure to share it!
That's not a microfiber cutting pad fellas, they sent you a 50/50 pad. Which is only half microfiber, so it's still a step below a cutting microfiber. Nice video keep them coming!
Hi Royalty. Thank you for the kind words and clearing up that microfiber (50/50)pad for us. (still new to those pads) Appreciate your help and support! Take care!
Thanks, guys. You inspired me to take advantage of the recent good weather here in Virginia and paint correct my 2014 Silverado using TW1&done. I used a medium-cut Hexlogic pad, 50-50 microfiber cutting pad with an inexpensive DA polisher. I followed up with some Griot's Garage wax applicator red pads and the results were stunning. No dust, no sour smell, just a deep base coat (Tungsten Metallic) shine. Following up with a "glass bottle" ceramic coating this weekend to show off that newfound metal flake. Kudos guys. You got me off my arse and that's no mean feat on a Sunday.
Appreciate your response and great job getting out there and detailing your ride! Sounds like it should be looking pristine!!
I used the One and Done yesterday on my car; using the 50/50 microfiber pad first (4 dots on the pad) and then used the black foam pad (4 dots on the pad). I tapped the pad over the area to be done, started the machine out at a 1 speed (using a Porter Cable machine) and then switched to 4 speed in a cross hatch; doing this way with the 50/50 pad. Then when using the black foam pad, I also tapped the pad over the area, started out with a 1 speed to spread, then changed to a 3 speed in a cross hatch. I noticed that with each pad and application, it was harder and longer to remove the compound; I had to use all three microfiber towels; and it wasn’t very translucent. What did I do wrong?
Hi Paul. It sounds like you might have too much product built up on the pad. Not sure of course, since we aren’t there, HaHa! Everything you’re doing sounds correct. Let us know if you figure it out. Thanks for watching!
Want to finish with Ceramic for UV. Can Pro 1 & Done be topped or should a different process be used to have the UV of Ceramic? Also, no machine; by hand - any tips?
After using that buff and shine pad take a polishing pAd and go over it again will get a way better shine
I just did the exact thing.....
Good vídeo guys and happy new year !!!
Thanks Rafael! Happy 2021 to you as well!
Great video already have the compound i liked a lot
Happy new year guys
Hi Bill. Glad to hear you like it as well. Pretty impressive stuff! Happy 2021 to you as well!
Should I get this or the Ceramic Acrylic Black Polish?
We would go with this one. It has more correcting ability! Thanks for watching!
@@PureOctaneGarage thank you so much! 🙌🏾
You’re welcome!
I know it’s hard but if I want to use the one and done by hand what kind of pad should I use? Medium heavy cutting pad?
Thanks for the question 6atlantis. By hand, you are right on with a medium density pad. We would have a lighter dense pad (usually more for polishing/not cutting) on hand as well, depending on your paint.
Is this product a temporary remover of scratches and they come back eventually? Also can you use a micro cloth and do it by hand
Hi Lisa. This Turtle Wax product will actually cut and correct. No fillers here. This note is directly from Turtle Wax: "Proprietary blend of high-quality precision platelet abrasives, removes up to 1000 grit paint imperfections for heavy-duty surface restoration"
You can use this by hand or machine, the correcting ability will be much less by hand though. Thanks for watching!
@@PureOctaneGarage Thank you for taking the time to send me this message
Quick question for this product there is no need to use an ipa after polishing/compounding correct?
Great question. There is no mention in the directions of an ipa wipe before moving onto your Last Step Protection, but are in the habit of always performing an ipa wipedown just to make sure we got every last bit of compound/polish off the paint. Thanks for watching!
great video and product review. happy New Year guys..
As always, appreciate you Richard! Happy 2021 to you as well!
What's the Grit on this?
Apparently I am late to the party - #563 🤦♀️
Love you the turtle wax!
It's never too late to this party! We love you and the Turtle Wax too!
Non foam pads like the uro fibre or wool or microfibre pads need to be primed , Need to cover all the fibres with polish
What machine did you use? I'm assuming you can't hand work this.
Hi 09ThunderOne. We used the Adam's Polishes Swirl Killer 15mm to apply and work this product. The instructions don't mention hand application. (although this is a great idea for a quick video trial) Thanks for the question and watching!
2nd from Puerto Rico 👍🇵🇷
Happy Holidays and have a Happy New Year 2021. Let's rock and roll with new reviews!
Have great new year Humberto.just finished the passenger side of the black ram with 303 graphene yesterday.raining now,watching the rain just sheet right off.we both beat Shelly.🤣
@@keithknechg3217 that's great news. You must be really happy and satisfied because you have it well protected now. Just a matter of maintenance now. Happy Holidays and Happy New Year for your family, stay safe and healthy! 🥳👍🇵🇷
@@1stfrompuertorico568 yep thrilled.full prep 3 weeks ago,tw blackpolish with a da.24 hrs later tw black ceramic.24 hrs later 303 on 1/2 truck.2 weeks later303 on the passenger side.obviously washed between the delayed applications.no garage,my boat is better protected with a steel building. 😂
Happy 2021 to you too, Humberto! You got it on the reviews, more to come😀
@@keithknechg3217 303 Graphene! Yes! We have a great short clip of the water sheeting action with the Adam's Spray Graphene when giving the Charger it's 1st bath after application. We'll be sure to share it!
Can this be applied by hand?
I wouldn’t
Happy new yrs boys....1ST...👏fun vid.usual TW ease of use.
Happy 2021 to you Keith! Turtle Wax is killing it, right!?
That's not a microfiber cutting pad fellas, they sent you a 50/50 pad. Which is only half microfiber, so it's still a step below a cutting microfiber. Nice video keep them coming!
Hi Royalty. Thank you for the kind words and clearing up that microfiber (50/50)pad for us. (still new to those pads) Appreciate your help and support! Take care!
Seems like my cars paint will need the orange cutting pad, do I must use a polish pad afterwards?
It’s a buff and shine uro fibre 50/50 microfibre pad, uses 2 types of microfibre fibres so it can cut and finish , it is a microfibre pad
It’s literally 2 types of microfiber homie.
Cool bananas..where can I get those same pads?...many thanks.
Hi Jeremy. Pretty sure these are Lake Country pads produced for Turtle Wax. Hope that helps. Thanks for the question and watching!
@@PureOctaneGarage thank you so much..Have a great year. best wishes