I absolutely love your videos! So easy to follow and you explain everything so well! I have only recently started decoupage and love it! I’ve made a few coasters and they have been successful, however, I’m struggling with painting the edges? I have tried using the sponges like you suggested, but it ends up going onto the front of the coaster and ruining them :( any suggestions? What am I doing wrong xxx
Thank you so much! Maybe try applying less paint, get your brush almost dry, but if you look on my coasters, I also have paint that goes over the front, it overlaps paper and creates this faded edge. Hope this helps xx
Absolutely marvellous idea, exactly what I was looking for.🎉 This pouring water on napkin instead of spraying makes big difference. I even didn't need to brush it, just moving was enough to make napkin perfectly flat - no bubbles, no wrinkles. I like this idea not using any decoupage glue on coaster/ tile surface. I was worried that even if this is sealed, glue may become sticky under varnish when used for hot drink. I also love Polyvine products, they are the winners, include crackling mediums. Also is important that this company is UK brand, this helps cut delivery expenses as most products are USA brands, expensive in UK + delivery cost. Thank you so much for sharing this technique, I always watch your videos 😂 Agata from UK
I've just received my coasters from you! They are absolutely beautiful. Amazing quality... I can see you take the time with your work and that you pay attention to detail. I would recommend you without any hesitation. Thanks xx
Hello! First time viewer… love your video and coasters. Question, please: Do you let your napkin dry before applying the Polyvine varnish? Also, I purchased the Polyvine that has 1 shell on the front. I noticed the formula you are using has 3 shells. The formula I bought is still heat resistant, but is very thick. Do you think I can use it? Could I maybe thin it with water? So sorry for so many questions. It’s very hard when first getting started. Thank you so much 💕
Can you use mod podge instead of the varnish? I’m sorry if you mentioned this already. Also michaels sells gloss polyurethane varnish from deco art. I know if I use Porcelain maybe I could try?
I have tried your wet method of decoupaging napkins and have had positive results on the whole. I used Wilco matt varnish which says it is heat resistant but a hot drink still sticks to it even after a few days drying. Do you find the Polyvine varnish does this? You are very talented and I have enjoyed your demos and learnt a lot.
I found that all of the varnishes that I've tried so far still stick no matter what it says on the tin, the only one that doesn't or hasn't so far is Polyvine heavy duty one (the one with shells on it) that I use in the video. So I now use it very sparingly as it is pricey but definitely a good investment if you do a lot of placemats and coasters. And thank you for your kind words
These coasters are so lovely! I’ve wanted to make my own for some time now, but just haven’t taken time to do it. Do you have any suggestions as to how I could use some of my leftover wallpaper used on a feature wall in my home, to make matching coasters for my bar cart? Thank you in advance, your work is so lovely. Any suggestions would be so appreciated! Hope you have a brilliant 2022! 🥰
A video I just got done watching shows that you could get blank square coasters from the dollar tree. Cut the wall paper slightly smaller than the coaster. Use decoupage to glue it down, use decoupage on top of it and then coat it with acrylic spray paint.
Love your videos. Can you please advise me what brushes to buy? There are so many out there and I want to be sure I'm getting the right sizes for my projects. Are flat brushes in different sizes the best? Thank you so much x
Thank you for this amazing video. Do you know if i can use the polyvine wood varnish on slate coasters? Will it still protect and seal it even though its a wood varnish? Thank you
Hi great video have made a few of these before seeing your tutorial but used mod podge for sealing which is rubbish just ordered your varnish but are you coating the backside with varnish too once painted x
OMG these are absolutely stunning! I know what my family are getting for Christmas gifts this year! 🤣. Thank you for taking the time to make this video. x
Greetings from NC ! I will give it a try and added to my next curriculum. I just taught a Mod Podge on a small canvas today to my students. I also just finished did a video for MP on a wood slices. So this coaster should be fun to add into another new project esp. the non wrinkles techniques, for sure the students will be excited. Thanks for sharing your beautiful coasters! Happy Holidays! ♥
Hello there, oh that’s wonderful! It makes me really happy to know that people all across the world are learning this technique and will be able to finally get their napkins wrinkle free 😄 happy holidays to you too and sending you lots of love from my house to yours! ☺️🌟
Love your videos - Can't wait to get started myself - I have some old place mats and coasters - could do with a revamp - I've ordered some Polyvine from amazon - thanks for your tips
Thanks for all your videos and sharing your ideas. I sure this is a learning curve but this is so cool, like the finish better then modpodge. Mod podge and me dont get along. It streaks or stay sticky I am not a big fan. I tired to do a plate with napkin and fabric and it left white streaks that still was there after 3 days. Question can these be washed with a damp cloth?
Thank you for your kind words and chiming in comments it really helps! Yes they can be wiped with damp cloth, I wouldn’t recommend any kind of cleaning chemicals just in case but water is fine 🤗
Did you put your varnish on when the napkin was still a bit wet. I waited till it dried and when I put mod podge on it wrinkled..I tried the varnish when the napkin was damp and that seemed better. I love this idea .
I realize you’re using unfinished wood coasters that you seal and sand before using. Have you tried an MDF product that already has a slick white finish? I’m wondering if I’d need to lightly sand it before applying the napkin in order to assure it adheres well.
Yeah I've bought pre-primed mdf coasters before and decoupaged straight on to them, depending on how slick the surface is of course you might have to give it a light sand if its very glossy or something but for the most part I think you should be ok :)
Thanks for all the great information and tips! You’ve done all the hard work to make it easy for those of us who haven’t experimented with using napkins. Inspiring to say the least!
Love your videos ❤️ You make such beautiful things and are so talented and artistic. On top of that you have a very nice voice and a lovely personality and explain everything so well. My favourites so far was the ”bookshelf” and the tin with a lid! Oh and the Christmas baubles 😊Looking forward to your next video!
Just a tip (it might help). I bought some small screw top plastic containers...I put my paint in them, then when finished with it - I just screw the lid on and there's no waste or pots to wash afterwards 😉 x
Thank you! I've tried that with little jam jars before but I think I might have to get some bigger ones so I can wash them out afterwards. I always wash stuff out anyways, I can't bare the thought of little containers going in to the bin :D:D
Hi thank you for your great video. Please may I ask for the link to the Wilco paint and also the silicone feet you use. Is this still your preferred paint and varnish. Thank you X
Hi! Thank you for your kind words! this is the paint - www.wilko.com/en-uk/wilko-chalky-finish-furniture-paint-white-750ml/p/0478352 silicone feet - www.ebay.co.uk/itm/Clear-3M-RUBBER-FEET-10mm-x-4mm-Small-SELF-ADHESIVE-Stops-Silicone-BUMPONS/193253344719?hash=item2cfecc05cf:m:m8xIjaNv9rN1UU5j4EhtgTg Wilkos is still my preferred one, I'm just trying out the Rustoleum one and Wilkos has been better so far. Preffered varnish is still Polvine :)
Thank you so much! I buy mine from EBay usually, some of them have websites too, google these ones, napkin shop, Kay art gallery, aggiescraft, Eden’s craft creations
If you put varnish or modpod down on the coaster it would have wrinkles. So she puts the napkin down with no glue then varnish on top which glues it down. Plush she add 3 to 4 layers of varnish
Wrapping paper will definitely work, just make sure you soak it in water before you apply it on top so that it soaks up the glue or varnish That you use. So apply 1 layer of glue, then put on your soaked wrapping paper on and using a foam roller or a plastic card through a plastic wallet get all the bubbles out. Then apply another layer of glue on top and let dry ☺️
@@IvetaZiedina Thank you for such a speedy reply. I love your coasters and I'm definitely giving them a try! Where do you get the coaster bases you use?
I absolutely love your videos! So easy to follow and you explain everything so well!
I have only recently started decoupage and love it! I’ve made a few coasters and they have been successful, however, I’m struggling with painting the edges? I have tried using the sponges like you suggested, but it ends up going onto the front of the coaster and ruining them :( any suggestions? What am I doing wrong xxx
Thank you so much! Maybe try applying less paint, get your brush almost dry, but if you look on my coasters, I also have paint that goes over the front, it overlaps paper and creates this faded edge. Hope this helps xx
Absolutely marvellous idea, exactly what I was looking for.🎉 This pouring water on napkin instead of spraying makes big difference. I even didn't need to brush it, just moving was enough to make napkin perfectly flat - no bubbles, no wrinkles. I like this idea not using any decoupage glue on coaster/ tile surface. I was worried that even if this is sealed, glue may become sticky under varnish when used for hot drink. I also love Polyvine products, they are the winners, include crackling mediums. Also is important that this company is UK brand, this helps cut delivery expenses as most products are USA brands, expensive in UK + delivery cost. Thank you so much for sharing this technique, I always watch your videos 😂 Agata from UK
I've just received my coasters from you! They are absolutely beautiful. Amazing quality... I can see you take the time with your work and that you pay attention to detail. I would recommend you without any hesitation. Thanks xx
Great video. No links tho? Thx. I can buy from Amazon, but would rather you get the credit? Also, where can I get these napkins? Love!!!
Hello! First time viewer… love your video and coasters. Question, please: Do you let your napkin dry before applying the Polyvine varnish?
Also, I purchased the Polyvine that has 1 shell on the front. I noticed the formula you are using has 3 shells. The formula I bought is still heat resistant, but is very thick. Do you think I can use it? Could I maybe thin it with water? So sorry for so many questions. It’s very hard when first getting started. Thank you so much 💕
Exact same questions here.
Can you use mod podge instead of the varnish? I’m sorry if you mentioned this already. Also michaels sells gloss polyurethane varnish from deco art. I know if I use Porcelain maybe I could try?
Looked like you used a whole napkin, was it 1 layer or 2 or 3? I guess I'll watch the 2nd video
Where do you buy your coasters from and is it necessary to put little anti slip things on the back..thank you
Could I possibly coat them with resin
I love your videos. Do you add the varnish while it’s still wet? You never said to leave it to dry. Also is one layer of varnish enough?
where do you purchase you supplies such as coasters and boxes and paints varish
I have napkins with words can I still use them, if so do I turn them around?
Would you recommend the same varnish for slate coasters?
Thank you so much. They’re really really stunning and gorgeous. I really really love 💕 this. Your napkins are really really stunning. xxx Mags
Thank you so much lovely ❤️
Please explain colour Blanding process
Where do you buy coaster blanks in bulk?
Thanks! Enjoyed watching and easy to follow 😁
I have tried your wet method of decoupaging napkins and have had positive results on the whole. I used Wilco matt varnish which says it is heat resistant but a hot drink still sticks to it even after a few days drying. Do you find the Polyvine varnish does this? You are very talented and I have enjoyed your demos and learnt a lot.
I found that all of the varnishes that I've tried so far still stick no matter what it says on the tin, the only one that doesn't or hasn't so far is Polyvine heavy duty one (the one with shells on it) that I use in the video. So I now use it very sparingly as it is pricey but definitely a good investment if you do a lot of placemats and coasters. And thank you for your kind words
These coasters are so lovely! I’ve wanted to make my own for some time now, but just haven’t taken time to do it.
Do you have any suggestions as to how I could use some of my leftover wallpaper used on a feature wall in my home, to make matching coasters for my bar cart?
Thank you in advance, your work is so lovely. Any suggestions would be so appreciated!
Hope you have a brilliant 2022! 🥰
A video I just got done watching shows that you could get blank square coasters from the dollar tree. Cut the wall paper slightly smaller than the coaster. Use decoupage to glue it down, use decoupage on top of it and then coat it with acrylic spray paint.
Are you waiting for the napkin to dry before you put on the varnish? Initially I mean, when you first put the napkin on the block.
No, I apply the varnish as soon as I’ve applied the napkin ☺️
Brilliant! Glad I found it, this explains my questions in another video that I had. Such a wonderful creative gift this will make!
Beautiful work! Quick question? Can I first put a coat of modge podge on coaster than napkin than the polyvine?
Great video, may give t his a try only discovered decoupage this weekend. lol Subscribed to you.
Where can you get the varnish
Beautiful coasters. Subscribed to your channel.Would this wet method word for fabrics and rice papers?
Love your videos. Can you please advise me what brushes to buy? There are so many out there and I want to be sure I'm getting the right sizes for my projects. Are flat brushes in different sizes the best? Thank you so much x
Great to know not to bother buying Mod Podge - apart from the cost, Brexit seems to have made it slow to get in the UK. Cool accent!
Hi you make these look so easy, really enjoyed watching you make these. Could I just stick wallpaper onto the coasters, would this work? Many thanks x
Beautiful napkins. Where do you get all of your napkins from? Thank you.
That technique saturating the napkin with water looks a little tricky but I will give it a crack. Lovely lovely work!
Loves your video♥️...Please tell me do you remove layers of tissue from napkins before applying water over it?
Hello! Do you varnish the back of the coasters as well? With polyvine?
Thank you for this amazing video. Do you know if i can use the polyvine wood varnish on slate coasters? Will it still protect and seal it even though its a wood varnish? Thank you
Loved your video. Very self explanatory. Thank you.
Hi great video have made a few of these before seeing your tutorial but used mod podge for sealing which is rubbish just ordered your varnish but are you coating the backside with varnish too once painted x
Superb video great information best one I've seen. Thank you
I just ordered this varnish off of etsy. I'm so stoked to use it on my coasters. Did you sand in between the coats?
OMG these are absolutely stunning! I know what my family are getting for Christmas gifts this year! 🤣. Thank you for taking the time to make this video. x
Greetings from NC ! I will give it a try and added to my next curriculum. I just taught a Mod Podge on a small canvas today to my students. I also just finished did a video for MP on a wood slices. So this coaster should be fun to add into another new project esp. the non wrinkles techniques, for sure the students will be excited. Thanks for sharing your beautiful coasters! Happy Holidays! ♥
Hello there, oh that’s wonderful! It makes me really happy to know that people all across the world are learning this technique and will be able to finally get their napkins wrinkle free 😄 happy holidays to you too and sending you lots of love from my house to yours! ☺️🌟
Hi love this video can I ask the varnish you use is it the
dead flat or the satin? Thank you
Love your videos - Can't wait to get started myself - I have some old place mats and coasters - could do with a revamp - I've ordered some Polyvine from amazon - thanks for your tips
Hello. Thank you for this brilliant video! Do you know if this technique would work with slate coasters?
Yes, absolutely!
عمل فني مميز وجميل ،وفكرة جميلة جدا
Thank you! Can’t wait to try!
just tried this. looking ok so far.
Can you use resin instead of varnish?
Wow! Very pretty, thank you Soo much for sharing
Thanks for all your videos and sharing your ideas. I sure this is a learning curve but this is so cool, like the finish better then modpodge. Mod podge and me dont get along. It streaks or stay sticky I am not a big fan. I tired to do a plate with napkin and fabric and it left white streaks that still was there after 3 days. Question can these be washed with a damp cloth?
Thank you for your kind words and chiming in comments it really helps!
Yes they can be wiped with damp cloth, I wouldn’t recommend any kind of cleaning chemicals just in case but water is fine 🤗
Very nice and easy to follow
Did you put your varnish on when the napkin was still a bit wet. I waited till it dried and when I put mod podge on it wrinkled..I tried the varnish when the napkin was damp and that seemed better. I love this idea .
Yep, usually varnish on the napkin while still wet otherwise mine also wrinkles up!
Could you please tell me what kind of products you use to seal to protect from water and heat? Thank you.
I usually use Polyvine Heavy duty wood varnish ☺️
Hello. These are lovely but wanted to ask if this method would work on slate. I use glue at the moment.
Hello, thank you! It should definitely work on slate :)
They are absolutely gorgeous. Thanks for sharing this.
Very interesting! You gave good explanations on why you use particular products.
Thank you lovely ❤️❤️❤️
Do u have to wait for it to dry first x
I realize you’re using unfinished wood coasters that you seal and sand before using. Have you tried an MDF product that already has a slick white finish? I’m wondering if I’d need to lightly sand it before applying the napkin in order to assure it adheres well.
Yeah I've bought pre-primed mdf coasters before and decoupaged straight on to them, depending on how slick the surface is of course you might have to give it a light sand if its very glossy or something but for the most part I think you should be ok :)
Thanks for all the great information and tips! You’ve done all the hard work to make it easy for those of us who haven’t experimented with using napkins. Inspiring to say the least!
Love your videos ❤️ You make such beautiful things and are so talented and artistic. On top of that you have a very nice voice and a lovely personality and explain everything so well. My favourites so far was the ”bookshelf” and the tin with a lid! Oh and the Christmas baubles 😊Looking forward to your next video!
Thank you so much for your kind words! There will be more coming for sure! ❤️❤️❤️🌸
Just a tip (it might help). I bought some small screw top plastic containers...I put my paint in them, then when finished with it - I just screw the lid on and there's no waste or pots to wash afterwards 😉 x
Thank you! I've tried that with little jam jars before but I think I might have to get some bigger ones so I can wash them out afterwards. I always wash stuff out anyways, I can't bare the thought of little containers going in to the bin :D:D
Baby food jars work great and are so easy to find.
these are so nice, you sure have beautiful napkins that you use !
Hi thank you for your great video. Please may I ask for the link to the Wilco paint and also the silicone feet you use.
Is this still your preferred paint and varnish. Thank you X
Hi! Thank you for your kind words!
this is the paint - www.wilko.com/en-uk/wilko-chalky-finish-furniture-paint-white-750ml/p/0478352
silicone feet - www.ebay.co.uk/itm/Clear-3M-RUBBER-FEET-10mm-x-4mm-Small-SELF-ADHESIVE-Stops-Silicone-BUMPONS/193253344719?hash=item2cfecc05cf:m:m8xIjaNv9rN1UU5j4EhtgTg
Wilkos is still my preferred one, I'm just trying out the Rustoleum one and Wilkos has been better so far.
Preffered varnish is still Polvine :)
Thank you for your reply, I tried gesso hated it. I now have the Wilkes much better. 😊 x
Very nice ❤ thank you
the varnish you use to put the napkin on is the same to seal it after painted its the same varnish?
That’s right, I use the same varnish throughout the process ☺️
How many coats of varnish are required ?
for coasters 3-4 to make sure they're protected well, anything else, depending on the use of the item :)
Where did you get the polyvine water and heat resistant varnish
I usually get it from wood finishes direct on eBay ☺️
Beautiful
Lovely ✨
Enjoyed the video. Thank you
These are so lovely!!!
TYFS -🥰 please stay safe 😷
So gorgeous
I just discovered your channel today and I love your projects. Should I put cork on the bottom of the coasters?
You can that up to you. That or felt if your worrying if it will scratch your table or what you have it setting on
You could yes, I usually put little silicone legs on if I want them to sit on something for me it’s the most cost effective way
Such beautiful designs / work x
Thank you! x
Love all your napkin choices. Where do you find the best selection?
By the way, your videos are the best. I’ve watched so many, but find that your explanations of the methods used, are the best for me. ♥️
Thank you so much! I buy mine from EBay usually, some of them have websites too, google these ones, napkin shop, Kay art gallery, aggiescraft, Eden’s craft creations
Beautiful 😍
So just a damp napkin to stick no glue. I'm guessing the varnish will make it stick.
That is correct.
If you put varnish or modpod down on the coaster it would have wrinkles. So she puts the napkin down with no glue then varnish on top which glues it down. Plush she add 3 to 4 layers of varnish
Exactly what the person below said,- napkins are so thin that varnish goes straight through it once it’s on so makes no differnce
These are gorgeous. Great tutorial. Thank you for sharing :)
Thank you!
This is brilliant! I love it!!
Hi where did you purchase these beautiful vintage napkins, and coasters?
Will wrapping paper work or will it wrinkle?
I would like to know about fabric with the varnish if so there be so many options.
Wrapping paper will definitely work, just make sure you soak it in water before you apply it on top so that it soaks up the glue or varnish That you use. So apply 1 layer of glue, then put on your soaked wrapping paper on and using a foam roller or a plastic card through a plastic wallet get all the bubbles out. Then apply another layer of glue on top and let dry ☺️
I havent tried fabric yet
@@IvetaZiedina Thank you for such a speedy reply. I love your coasters and I'm definitely giving them a try! Where do you get the coaster bases you use?
@@RainorShine1 I have wondered about that too. Will the varnish yellow over time?