Це відео не доступне.
Перепрошуємо.
Will It Run? £100 Chinese Scooter Not Starting What To Do!
Вставка
- Опубліковано 25 чер 2021
- This Chinese scooter hasn’t been started for god knows how long it’s full of spiders and I manage to get it going more videos coming soon on this bike servicing it and doing brakes etc don’t forget to like, share and SUBSCRIBE 👊🏻👊🏻💯💯❤️❤️
Well done bud , i've got 3 to work on so lets see if it can sort out my ones like you did
Yeah I noticed ya got the bikes In mate looking forward for the next videos 👌🏻
Good result quick fix well done Danny.
Cheers buddy that bike is still going strong 👌🏻👌🏻
Pro tip: always drain the fluids,esp. The gas . Ethanol will always clog the carburetor if scoot sits more than 2 months. Also deep clean the carb. Cheers
Tip check the tappets you will be surprised how many times I've come across it makes a big difference to the running and cdi box.
Thanks for the great advice budsy
Can I just say that when testing a spark-plug 1. it needs to go against a bare metal area - not painted like the frame, and 2. you need to make contact with the outer part of the plug ( outer electrode) and not the inner electrode.
Hey man, nice video. I have a 150cc gy6 2 years parked on a storage, now is not starting. Im going to see your channel
Good luck with ur project mate 👌🏻💯
We had one back in the day it stayed in my garage filthy with spider webs and rust and all sort of dirt I cleaned it yesterday and made it look new tomorrow am going to get in some gas and it’s ready to go it hasn’t been on for 2 years and I turned on as soon as I tried to turn on
Yeah there good little bikes to be fair don’t forget there’s a cut of switch on the side stand if the side stand is down u won’t get a spark ⚡️
Good video mate🙌
Plz help... scooter sat for awhile. Cleaned carb it looks spotless...it idles fine...give it any throttle at all it dies right away...fuel bowl is full... if i detach vacuum line idle goes way up... im lost
Nice buy that Danny, looks tidy too.
Cheers Carl yeah it’s in good kick to be fair just need to give it a jet wash and get rid of all the spiders 🤭🤣👊🏻
Nice work Danny, might be worth blanking off the egr valve just to give it a little bit more power👍
Yeah was thinking about that to but as I’m gonna sell it on I’m gonna leave it for the new owner to decide but if I was gonna keep it I would defo blank it of thanks a lot Dan 👊🏻💯❤️
Ps I just watch you check the oil and you don't screw it in to check it you just stick the stick in and don't screw it . This will give you the true oil check.
hey mate, When you were using the electrical contact cleaner what exactly did you clean? and how did you do it, Also is snipping a bit off the end of the spark plug safe?
I unplugged all the connector blocks and cleaned them with the contact cleaner and shipping a bit of the spark plug wire is safe make sure ignition is of the
Quick question pal.....what plugs did you clean we've the same problem no spark
Hey help m my
Hond today difficult kick start
But fire is coming spuk plug ,coil and CDI are good
In case of fuel is good supplies
Can you point me in the direction please , I'm after a cheap chinese exhaust that will fit my lexmoto titan 125 (2019) I've got somebody that's going to weld me a bung and tap a lambda sensor on . Just cannot afford the ridiculous prices of a new one , so an eBay special that will fit with some modification required . Keep up the good videos and if you can help it'd be much appreciated
Yo bro I use that oil in my 2 stroke rc motor good stuff hope ya all good bro
Yeah all good Brother hope ur well to my guy 💯👊🏻❤️
Fire 🙈🙈🔥🔥
🤷♂️😂💯💯👊🏻👊🏻❤️
Good helpful video.
Thanks buddy 👊🏻👌🏻❤️
Come on be honest, the reason you sprayed penetrating oil in that black hole was to drown the spiders waiting to jump you 😱😱🤣
GUILLTTYY 😂😂
I have a gator 50 f3 it getting air gas and fire turns over won't start what's it's problem
Nice one
I've got the same one I believe and it doesn't have power when it goes up the hill would be nice if u know what the problem ?
A phew things I would check personally is your rollers and belt maybe the carb needs cleaning when was the last time you changed oil spark plug and air filter could be something so simple like air filter little bit clogged
@@DTMotorcyclesEssex
👍
Good info 👍👍
Hi there I was wondering if you knew roughly were abouts my headlight relay might be located on my Sinnis shuttle 125cc I watch your videos an noticed you have basically the same bike the red and black £100 one thanks mate
No probs buddy 💪🏻
Thanks mate I just dont no where it is located
New throttle cable and its profit time.
Absolutely thanks Martin 👊🏻👌🏻
First clear cobwebs
Yo g I got a fmr 50 it’s got spark it’s got fuel to the carb it’s spotless before you ask lol but just won’t fire I’m thinking timing cos I’ve put fuel in the bore and still nothing just coughed and smoked like yours did When it died but it just won’t run
Have a vid on my Chanel bro
Give me a shout bro
Yo tiz get a compression tester on it and check what it son
@@DTMotorcyclesEssex I ain’t got one bro see it feels like it’s weak but not bad ya get what I mean it turns over okay with the plug out I can feel compression and it’s either valves or timing and tbh I ain’t got the Interest or the motivations on it to bother looking I’m gonna swap it with a mate of mine who’s got a 250 quad road legal just used off road needs a lower wishbone nut that’s all so fuck it this owes me 55 quid and that’s gotta be worth more than this lol
@@DTMotorcyclesEssex if you get time have a look at the vid I put up bro
cash in the bank on that one .....nice
Just gotta wait for bloody logbook lol 😂
Air hose to get them off