Replacement arrived!By the way, I did forget to mention that the original lure did have a decent strike however as most anglers will attest you can get a hit ua-cam.com/users/postUgkxCbNOWAGmn6nfbCbJDmasvBq7J38KZNw2 and fish will hang on and release lure. I used the replacement lure yesterday and ran thru a Shimano Waxwing, Kastmaster, Bobber (set to sink). I found the does run deep (I casting on the flats 3.5'). Make sure you adjust your rate of retrieve and rod tip angle (up) to prevent getting snagged on bottom. Used it a couple of times and action was very lifelike (looked like local bait fish for trevally), craftsmanship very good....however eyeball fell out. I asked for replacement and it is on it's way! It was very easy to change out treble to single inline hook.
If you use 2 pound test, no higher than 4, then you can cast a decent way. I too use the snap beans or peas wtf ever their called. I’ve caught native brook trout on them.
@@xjunkxyrdxdog89 oh i thought it would be like 500+. Lol. I have seen those scanners online and the desktop ones are exspensive so i thought it would scale with size
@@charadremur333 buying the equipment himself would be more expensive. It would be more practical to have one made for him. That said, a 3d scanner ranges from a few hundred to tens of thousands. 3d printers have a similar price range. He would also need software and filiment. All together it would cost about $1,000 to do it all himself using the bare minimum tools. Given the success of this channel, the views would likely outweigh the cost.
Dude, micro cranks are da bomb!! There are actually many different kinds of largemouth and smallmouth. The weird bass you caught looked something like a Coosa bass. Mass produce those lures. I'm glad you understood that you needed a treble and actually changed it and saw how it changed.
Awesome, that tiny crank bait is a beautiful lure, I made one in dark brown and grey with a slight gold wash, a killie , a common live bait around here in Jersey and i was hammering trout and walleye. Beautiful work, thanks for this video.
@strange ghost I meant that 618 almost always fishes with microbait, so if he wants to se more fishing with that stuff, he should check out his channel but that idea of marlingbaits making lures and then some kind of several youtubers challenge like "who can catch more with this bait" sounds interesting
Ok BAIT IDEA 💡, I mentioned a chip lure in the past but I got a better idea how about a jointed bait chip being the back half and a strawberry up front. Chip chasing a strawberry?????
Awesome job making the smallest “micro” crank bait ever and thanks for leaving the creek a little cleaner than you arrived, most of us fishermen do that here in Hawaii.
As much as I love the little crank bait and the skill you have in designing and building something so small, I do have one major complaint. Take my word for it, wear safety glasses when using your tools, especially power tools. Close one eye and try do everyday stuff and you will get my drift. I lost the use of my left eye about 6 years ago and I still struggle with lots of things. Aside from that complaint I love your video's and also love that K-9!
Yo-zuri makes the little snap bean crankbaits, which are just a bit bigger than this. Put them on a leader with a swivel or on a bfs reel and they're awesome for panfish like this. I've had rock bass smoke them too
i made this with no power tools. i used a small peice of wood, small hook, and a small piece of plastic for the lip and i’ve caught some really nice fish!!👍👍
I bought a pack of similarly sized micro crankbaits a couple years ago & the bluegills could not get enough of it. They’re so small, the splash doesn’t really scare the fish away but you can easily get a panfish of any size to chase it.
Just saw this and subscribed immediately. I love how you can make such an effective bait in your own workshop, and how thoroughly you cover every step from the design to the actual catch. Great channel, man!
Ive been making my own for a year or so now. I only use a drill and a Dremel tool and exacto knife. O get cheap dowls from Walmart craft department. I use a aluminum can to make lips and sometimes tails and fins. Paint all by brush. None look as good as yours but they keep me busy and i have fun doing it. I just learned about your channel about a month ago and im hooked. I got out my old airbrushes and cleaned them up and ordered some stencils. Now waiting on a compressor. Thanks for teaching me some new tricks to up my game.
Years ago, I had a tackle box stolen full of collectible Little Rocky jointed minnows which were 1.5" in length. These crank baits were variably painted and were very effective for UL fishing. I have not seen any wooden baits like them in over 40 years and yet they were real fish catchers on ultra-light spin tackle. Have you ever seen them? I love small lures and your video is amazing!
Marling Baits, The fish you caught in this video that you thought was a hybrid is called a Mean Mouth Bass. It could be a Largemouth- Smallmouth hybrid or a Smallmouth-Spotted Bass hybrid. I have caught a few Smallmouth-Spotted Bass hybrids in a creek very similar to the one in this video. I think they got the name 'Mean Mouth' because they fight very hard. This is a great video and congrats on the successful lure you made.
This is my first time watching your videos and I must say: "I AM TRULY IMPRESSED!" GREAT JOB MAN! I am subscribed now for sure. Look forward to my "GREAT JOB MAN" comments.
Yaptıklarınızı hayranlıkla izliyor ve takip ediyorum. Olta balıkçılığına olan merakım yüzünden, böyle videoları izlemekten alıkoyamıyorum kendimi. Tebrik ederim...
I am really interested in what you do. Can you possibly do a how to on the easiest bait you know? Would really be cool and something my fiancè and I would try. Ik u kind of do step by step now but you know what I mean. Keep up the good stuff man thanks.
yay first seruiosly man i think the 10 inch soft plastic trout swimbait would be a good challenge it doesnt have to be a one day build just take your time with it
What he said about having more lip then not enough.. that's true. I was working in a bait and cut the bill down until my home made swim bait wouldn't swim. So I redesigned it in cad and gave it just enough lip to make it swim 👌 awesome
24:38 "Decent release." I laughed. your release style: just let it flop out of your hand into the water.. i'll give you that, it did hit the water.. after a double tap mid air
The man's basically a master-baiter at this point.
U nasty.
Oof
OwO
Jack Stevens lol
owo
I can’t express it enough about how much I enjoy your videos. Try an make a catfish
Daniel Kintigh facts
@Daniel Kintigh hes the reason I'm designing and making my own musky lure
Bru that is so cool and would be so good with catching small bass at the bond I fish
Replacement arrived!By the way, I did forget to mention that the original lure did have a decent strike however as most anglers will attest you can get a hit ua-cam.com/users/postUgkxCbNOWAGmn6nfbCbJDmasvBq7J38KZNw2 and fish will hang on and release lure. I used the replacement lure yesterday and ran thru a Shimano Waxwing, Kastmaster, Bobber (set to sink). I found the does run deep (I casting on the flats 3.5'). Make sure you adjust your rate of retrieve and rod tip angle (up) to prevent getting snagged on bottom. Used it a couple of times and action was very lifelike (looked like local bait fish for trevally), craftsmanship very good....however eyeball fell out. I asked for replacement and it is on it's way! It was very easy to change out treble to single inline hook.
I would honestly buy one of these
Yo zuri snap peas are similar
ultralite fishing and cast two feet
If you use 2 pound test, no higher than 4, then you can cast a decent way. I too use the snap beans or peas wtf ever their called.
I’ve caught native brook trout on them.
I think wish has a deal of like 10 small ones like that for super cheap
Strike King makes a tiny lil crank bait thats about this size...
3d printer scan yourself make a bait of yourself and see if the bass officially like you?
I support this.
Do iiit
Supper exspencive
@@xjunkxyrdxdog89 oh i thought it would be like 500+. Lol. I have seen those scanners online and the desktop ones are exspensive so i thought it would scale with size
@@charadremur333 buying the equipment himself would be more expensive. It would be more practical to have one made for him.
That said, a 3d scanner ranges from a few hundred to tens of thousands. 3d printers have a similar price range. He would also need software and filiment. All together it would cost about $1,000 to do it all himself using the bare minimum tools.
Given the success of this channel, the views would likely outweigh the cost.
Dude, micro cranks are da bomb!! There are actually many different kinds of largemouth and smallmouth. The weird bass you caught looked something like a Coosa bass. Mass produce those lures. I'm glad you understood that you needed a treble and actually changed it and saw how it changed.
I love how happy you were that you started at 10:30am. You didn’t say “this is early for me” but we all knew you were thinking it.
We were all thinking it ourselves
Small/large mouth hybrid, introducing the medium mouth bass.
Or just the mouth bass
Bass.
This comment and its replies are hilarious 😂😂😂
@@MarkJennings1. do you think it comes a men and women's sizes?
That was a rock bass, technically it's a large mouth bass, however has traits of the small mouth
I've crushed all of your videos in the past week, absolutely love how dry your humor is and the lures you make! Cheers
I love how he is *"cranking"* out all of these videos lately 👌🏼
crank baiting them so too speak.
Well he is the master baiter.
Indeed he is
You’re like the Bob Ross of bait making.
with "work sharp :D"
He's got to paint a "happy tree" on a lure. I'm fairly convinced he already has the weed part down.
Facts
So he’s going to die???
Being likable doesn’t make him Bob Ross.
I have been watching this man for 1 minute and 9 seconds and I'm already loving it. I think its the way he talks, he's just a funny dude.
im lookin at this guy calling fish their names and im over here calling everything a bluegill unless it has legs
boringrelic, same bro
boringrelic it’s ight dude 😂to check if it’s a bass or not hold it in the water if it turns black or a grayish color it’s a bass 😂
Otto Cornett same for u dude just do wat I said to check
Tru
What do you call handicaps 😳
The small profile of that lure is perfect for the clear water you're fishing and doesn't spook the fish. Very nice. Patent it!
Yes ! I'd definitely buy one.
I need some for the creek I fish.
Awesome, that tiny crank bait is a beautiful lure, I made one in dark brown and grey with a slight gold wash, a killie , a common live bait around here in Jersey and i was hammering trout and walleye. Beautiful work, thanks for this video.
You guys using killies as live bait?
Is it bad that I watch these for Bedtime instead of “oddly Satisfying” or ASMR”???? Helps me have dreams of catching fish 👍🤠
Same, nothing more soothing than fine craftsmanship!
that cowboy emoji made me happy
Will East same right now
Carlton Wexler it’s every night I work! Helps with the separation anxiety from the ponds and lakes
I’m disappointed that you called yourself a bait maker and not a masterbaiter
leetlebob right! Man... opportunity missed!
Bofl
69 likes XD
you have to apprentice for ten thousand hours to hold the ranks of masterbaiter
Millennial jerks.
Thank you for cleaning up after others. Keep it going guys.
Aww it's so freaking cute!
I'd love to see more microbaits, like a shrimp, mosquito larvae or an itty bitty frog!
L. Wren I second the tiny frog!
Then go to 618fishing channel
@strange ghost I meant that 618 almost always fishes with microbait, so if he wants to se more fishing with that stuff, he should check out his channel
but that idea of marlingbaits making lures and then some kind of several youtubers challenge like "who can catch more with this bait" sounds interesting
i'd love to see a jumbo shrimp
i agree!
Ok BAIT IDEA 💡, I mentioned a chip lure in the past but I got a better idea how about a jointed bait chip being the back half and a strawberry up front. Chip chasing a strawberry?????
Eddie Lindsay everybody like this
Awesome idea
A chip with a strawberry lip
Lit dude
Why have I not stumbled across your channel before... One video and you're already on my top 5 content creator list.
Awesome job making the smallest “micro” crank bait ever and thanks for leaving the creek a little cleaner than you arrived, most of us fishermen do that here in Hawaii.
I have to clean up after others here in Maine as well. Annoying but what can you do?
If most of you fisherman clean up how can it be littered?
@@JohannFreytagvonLoringhovenCS because some people suck, we just have to deal with it tbh
As much as I love the little crank bait and the skill you have in designing and building something so small, I do have one major complaint. Take my word for it, wear safety glasses when using your tools, especially power tools. Close one eye and try do everyday stuff and you will get my drift. I lost the use of my left eye about 6 years ago and I still struggle with lots of things. Aside from that complaint I love your video's and also love that K-9!
Yes
I love it great work
What happened?
I got a medal shaving in my eye once and now i wear safety glasses allthe time!
What happened to your eye john?
That actually looks really fun catching little fish like that
Yo-zuri makes the little snap bean crankbaits, which are just a bit bigger than this. Put them on a leader with a swivel or on a bfs reel and they're awesome for panfish like this. I've had rock bass smoke them too
Please never stop making these videos me and my partner really enjoy them and she hates fishing but enjoys watching your videos
Who TF calls their girlfriend or wife their partner?
2fastHarley 😂😂 millions of people
@@korpa12 Thank you korpa yes millions of people :)
"man what a small lure!" *Fly fisherman laugh in a corner*
I'm just surprised you didn't lop a finger off with all those saws! Solid work.
I am a fly fisherman
I’m a bass angler and definitely not professional
i made this with no power tools. i used a small peice of wood, small hook, and a small piece of plastic for the lip and i’ve caught some really nice fish!!👍👍
Here's an idea, for 200K subs, let your wife make a lure and you have to fish it...
Definitely
Yes
I agree
It's official, subscribers like to see that happening.
Wow his wife is not an "it"
You are a Bob Ross of making lures
Mazurełe lure making is an art🙏🏽
I bought a pack of similarly sized micro crankbaits a couple years ago & the bluegills could not get enough of it. They’re so small, the splash doesn’t really scare the fish away but you can easily get a panfish of any size to chase it.
What a great notification to get just seconds after coming home from fishing. Excellent work, and keep it up!
I also like the idea of having your wife make a lure and you fishing with it. Or make a carp Swimbait.
I fly fish and some of my flies are unrealistic small, smaller than that jerk bait and walleye and pike love it
I don’t fish but I love your videos. The creativity and skill is just pure fun to watch!
You should go to like a dollar store and grab some random stuff and try to make a lure out of it. Great video by the way!
This for sure!
The running commentary while doing the steps is very satisfying. The geeking out is amazing :D
"Bluegill hybrid thing..."
LOL!
Cool video. Thanks for the laughs.
As always... great work.
You should make a topwater spook that looks like a hotdog. I bet that would slay the fishes!
If he made a corndog bait he could fish for dork fish....& hang with Bill Engvall.....LOL ...🤣😂😅
I died at 27:35 . I don't know why but your humor is so perfect for these kind of videos. You got a new subscriber :)
Dude, the amount of talent you possess.... Absolutely amazing.
Why am I only discovering you now? You're awesome 😆
"It counts" you're awesome. Love it, the personality was my favorite 👍
Just discovered your channel. I really like your personality and your talent. It must be super rewarding to make a bait and have it work.
Oh my ! If it was walleye season all those chubs would be worth gold ! And that bait worth platinum!
Thank you for thinking of it. LOVE the single hook crank idea.
My favorite video of yours. make more ultra light lures!!!
I agree a nice catfish swimbait one day would be incredible for you to pull off
I have no idea how this came up in my feed but I'm hooked! I don't have the skills to do something like this but I think I'm gonna try!
so good at makin baits he’s a professional master baiter
Just saw this and subscribed immediately. I love how you can make such an effective bait in your own workshop, and how thoroughly you cover every step from the design to the actual catch. Great channel, man!
I'm jealous; The fish in the ponds I go to won't ever hit the small crankbaits and the like, and yet you got a few in this video.
Make a lure out of ramen noodles! you can do it if you seal it with super glue! It would be a challenge but it would be cool
Somewhere there's a shop teacher watching your videos and having a heart attack when you're using the band saw and sander lol
Ive been making my own for a year or so now. I only use a drill and a Dremel tool and exacto knife. O get cheap dowls from Walmart craft department. I use a aluminum can to make lips and sometimes tails and fins. Paint all by brush. None look as good as yours but they keep me busy and i have fun doing it. I just learned about your channel about a month ago and im hooked. I got out my old airbrushes and cleaned them up and ordered some stencils. Now waiting on a compressor. Thanks for teaching me some new tricks to up my game.
Awesome man love your diy bait videos love learning something new!!
This guy makes such cool BaitsI hope he keeps doing what he’s doing for a while
Years ago, I had a tackle box stolen full of collectible Little Rocky jointed minnows which were 1.5" in length. These crank baits were variably painted and were very effective for UL fishing. I have not seen any wooden baits like them in over 40 years and yet they were real fish catchers on ultra-light spin tackle. Have you ever seen them? I love small lures and your video is amazing!
Marling Baits, The fish you caught in this video that you thought was a hybrid is called a Mean Mouth Bass. It could be a Largemouth- Smallmouth hybrid or a Smallmouth-Spotted Bass hybrid. I have caught a few Smallmouth-Spotted Bass hybrids in a creek very similar to the one in this video. I think they got the name 'Mean Mouth' because they fight very hard. This is a great video and congrats on the successful lure you made.
This is my first time watching your videos and I must say: "I AM TRULY IMPRESSED!" GREAT JOB MAN! I am subscribed now for sure. Look forward to my "GREAT JOB MAN" comments.
Wow this guys a really good bait maker, maybe even a master baiter
I have some GIANT Bluegills that would love that little bait! It runs amazing for its size!
"You guys probably can't see that at all... But I can and I'm amazed" favorite line to date
Yaptıklarınızı hayranlıkla izliyor ve takip ediyorum. Olta balıkçılığına olan merakım yüzünden, böyle videoları izlemekten alıkoyamıyorum kendimi.
Tebrik ederim...
I could sure use a Work Sharp ™️ product in my work shop. Thanks for the advice and link kind stranger.
dude, you are HILARIOUS! I would love to go fishing with you.
His humor is so dry but it's great! Lol
Dude, your dry humor is on point. Great video!
2:10 you got a star in your beard bro thats dope
Top 10 times *WoRk ShArP!* Was the best tool to sharpen ur knives
I respect the right reel handle cast. Great vid
I yelled "chub" at my computer while you were trying to remember what you had caught... my girlfriend was concerned
Cameron Geller 69th like 👌
I would tie a few of Chip's guard hairs around the base of the treble
I would also add a a small dry fly type tail, try to match the color pattern of the body
WOW, nice little hand made lure.
Ok, Chip wins. I say hr. Long Chip video. ✌🏻🇺🇸🎗🐠🐾
I waited a whole minute and eighteen seconds for the iconic ONE DAY! 😐😂
Love this one my uce I have to watch it every other week great mini lure
that would be an excellent lure for a small survival kit
Next video I think you should try hydro dipping a lure like a crank bait like if you want him to see👍🏻
So thankful that the algorithm put this vid in my feed. You're funny.. continue to be You. Your great. I shall be following you.
I am really interested in what you do. Can you possibly do a how to on the easiest bait you know? Would really be cool and something my fiancè and I would try. Ik u kind of do step by step now but you know what I mean. Keep up the good stuff man thanks.
yay first seruiosly man i think the 10 inch soft plastic trout swimbait would be a good challenge it doesnt have to be a one day build just take your time with it
That would be insane. Do it you won't
I have a hole mess of those little thangs and they work well in the creeks around mid TN. Thank you for the vid.
The smallmouth/largemouth hybrid gets caught is in fact a hybrid known appropriately as “meanmouth” bass. Have a good day knowing a new fish :)
Thanks
idk if that actually was a meanmouth thougg
@@BobbyGloBeatz I’m not 100% sure either but it looks like a few I’ve caught that I’m certain we’re meanmouth
For the 200k lure try a multi minnow bait like a Alabama rig.
Dude, that Work Sharp ad got you my subscription lol. Priceless, I'll probably buy one.
make a lure that looks exactly like chip, with jointed limbs and tail for 200k
This!
yes this
That would be cool!
Yeah. This is definitely a winner .
THIS!!! see how many fish Chip can catch.
For 200k you could make a Chip lure! I'm imagining like a 7 piece deal :] keep up the awesome work man!
I love tiny fishing, mini lures and mini rods!
When you're that small, everyone's after you - also true for fish.
wow that little lure has got a good action to it.
Nice man more ultralight videos! Maybe som trout fishing with them also?
I want the hour long Chip video, whether or not it’s the 200k special...
Nice love that bait. Love creek fishing as well
Me: Spends hours making this lure trying to make it look as good as him.
First Cast: Hung up.
ua-cam.com/video/67O7tQw3hHw/v-deo.html
Fax
Same
Sus
He actually makes crankbait to lure live bait
Nice warmouth! I rarely get to catch them myself.
Give away 200 lures? Maybe hard plastics or something that can be cranked out fast? Also, I heard a strawberry popper would make a good tiny lure.
Marlin baits should come out with a line of these in a little deeper diving and in a little square bill
What he said about having more lip then not enough.. that's true. I was working in a bait and cut the bill down until my home made swim bait wouldn't swim. So I redesigned it in cad and gave it just enough lip to make it swim 👌 awesome
Put the go-pro on Chip, and let him run about for a while.
A friend of mine did that. ua-cam.com/video/Pf29hfoirYY/v-deo.html
24:38 "Decent release." I laughed. your release style: just let it flop out of your hand into the water.. i'll give you that, it did hit the water.. after a double tap mid air
😂