Not to be a hater or anything as this is an incredible build few people dream of building, but torx head screws would of been way cleaner on the subs. As they say it’s the small things. Again not hating on anything amazing build troughout
If there is room for an 8” in the door. Why not fit one? I also have an A4 and am looking for an upgrade for my front speakers. Great build, love the car. Keep the posts coming.
The thing that stopped me upgrading my S3 was the fact it had a "high spec" factory sound system.. the thought of ripping out the amps and trying to fit a compatible head unit and component speakers just put me off... it's a no brainer if your car has the standard four door speakers though, fair play to your man going all-in Alpine!
No sound treatment on the outside of the doors/door cards or fast rings around the speakers? Also, epoxy on the tweeter instead of making an abs tweeter ring/bracket?
How big is the sub box for this subwoofer ? The weird thing with this subwoofer is that alpine doesn't recommend a volume enclosure for this subwoofer on the manual
Awesome clean build. So 1 HDA-M80 mono amp is enough to power 2 x HDZ-110 status subs ? How did you mount subwoofer box to the car trunk floor so it would not fly around in that fast rs4?
How did you do this for 8k pounds? I have installers here in the states asking for 35 to 45k USD for just the Status line AND NOT F#1 Status Line. Btw, Im doing the install myself.
@CASS TV amazing build 🤩 The surrounds on the Alpine Subs look fantastic, and i'm guessing their design may improve xmax control and increase longevity against deterioration. One question in relation to placement of the 12 channel amp & processor in between the 2 Alpine Subs : In Quality Home Audio, acoustic isolation, such as Acoustic Feet, are fitted to Amplifiers and especially sensitive equipment such as DACs & Streamers. Acoustic Feet are designed & used to reduce vibrations to electronic components in the Audio Equipment. This helps to reduce any loss in sound quality. One of the slightly noticeable improvements, which are very minimal, is seperation of frequencies, in regards to instrumentsq, which creates air and space. Do you think by placing the 12 Channel Amp & Processor further away from the Alpine Subs to reduce vibrating may provide an ever slight improvemmet in sound clarity ?
I can imagine this is great kit, but 8k - no! I'd rather spend that on a system for home (including acoustic treatment) and get a sound an audiophile would actually appreciate. Even for a cal, I'd rather have a system with better balance rather than "doush doush" bass.
Those subs look gorgeous. I used to prefer sbl but these days prefer sq bass
SQ is the way to go (although SPL sometimes is also cool 🔊🔊)!
@@CarAudioSecurityUK I'm done with I feel too old at 37
💯 Hard to find that balance 😂
Not to be a hater or anything as this is an incredible build few people dream of building, but torx head screws would of been way cleaner on the subs. As they say it’s the small things. Again not hating on anything amazing build troughout
If there is room for an 8” in the door. Why not fit one? I also have an A4 and am looking for an upgrade for my front speakers.
Great build, love the car.
Keep the posts coming.
That car looks so good with those wheels, the nardo grey and the overall looks of it is sexy❤
Thorough explanation. 👍🙏.
Installing a 8k Alpine System and using a 576kbits Bluetooth source 😅
11s? abit of a weird size. I used to have Alpine Type-X in my old E36 love them. Status is different level.
Better than focal utopia and JL audio c7 ? ( rookie)
The thing that stopped me upgrading my S3 was the fact it had a "high spec" factory sound system.. the thought of ripping out the amps and trying to fit a compatible head unit and component speakers just put me off... it's a no brainer if your car has the standard four door speakers though, fair play to your man going all-in Alpine!
It would be nice to share how you adjusted the equalizer slopes from Hu
Some shots sub flexing 😊
Hope he's changing the number plate. Can't have a jbl plate on a alpine car haha
Lol😅
💀💀
00:21
No sound treatment on the outside of the doors/door cards or fast rings around the speakers? Also, epoxy on the tweeter instead of making an abs tweeter ring/bracket?
You can feel 40khz? I doubt that very much, it's far too high a frequency to move any air.
How big is the sub box for this subwoofer ? The weird thing with this subwoofer is that alpine doesn't recommend a volume enclosure for this subwoofer on the manual
Very nice. What crossover points did you end with?
@Blade... Ur sound knowledge it's on... Wow
can customers get the software to tune it for themselves?
The one thing that i have doubts about on those subs is the surround design, it looks like it would tear much quicker than a normal design.
What about scratched right door grille? Did you replace customer door?
Awesome clean build.
So 1 HDA-M80 mono amp is enough to power 2 x HDZ-110
status subs ?
How did you mount subwoofer box to the car trunk floor so it would not fly around in that fast rs4?
Hi, is the factory amp in this build dormant once the Alpine Status amplifiers are dropped in?
40khz = hi res certified?
How did you do this for 8k pounds? I have installers here in the states asking for 35 to 45k USD for just the Status line AND NOT F#1 Status Line. Btw, Im doing the install myself.
I had a single JL Audio W6 10 in my golf and I can guarantee 2 of them will destroy those Alpines
Why have you skipped the door sound deadening? It is a huge mistake.
круто!🤗👍
Bien 👍
Perfecto
@CASS TV amazing build 🤩
The surrounds on the Alpine Subs look fantastic, and i'm guessing their design may improve xmax control and increase longevity against deterioration.
One question in relation to placement of the 12 channel amp & processor in between the 2 Alpine Subs :
In Quality Home Audio, acoustic isolation, such as Acoustic Feet, are fitted to Amplifiers and especially sensitive equipment such as DACs & Streamers.
Acoustic Feet are designed & used to reduce vibrations to electronic components in the Audio Equipment. This helps to reduce any loss in sound quality.
One of the slightly noticeable improvements, which are very minimal, is seperation of frequencies, in regards to instrumentsq, which creates air and space.
Do you think by placing the 12 Channel Amp & Processor further away from the Alpine Subs to reduce vibrating may provide an ever slight improvemmet in sound clarity ?
👍
Test?
This is the system I wanted. But I won’t go for the subs.
8k for alpine😳 that's mental 😂
I can imagine this is great kit, but 8k - no! I'd rather spend that on a system for home (including acoustic treatment) and get a sound an audiophile would actually appreciate. Even for a cal, I'd rather have a system with better balance rather than "doush doush" bass.
Audio system is awesome, but the car is very problematic.
modified sound systems in cars are utter 💩💩💩