Clear Stamper Not Working/How to Prime Clear Stamper/BeautyBeam86
Вставка
- Опубліковано 20 сер 2024
- #beautybeam86 #beautybigbang #howtoprimestamper #clearstamper
Hi guys
Today Iam going to share with you guys : Clear Stamping not working/how to prime clear stamper video
I did try couple of methods and shared a fool proof method that works perfectly for me, I purchased a clear stamper head on www.BEAUTYBIGBANG.com and when I tried it did not stamp or pick up the images properly, so I decided I will make this video as it will be helpful for many out there who has the same issue, because when I was new to clear stampers I did buff them watching few videos and my clear stamper was ruined, and another sticky stamper was also damaged due to bugging. And also using acetone on stamper heads will damage them as well.
If your newly purchased clear stamper is not working it means that the stamper need to be primed or prepped
What is priming/preparing a stamper???
Stampers have a shining layer on top which needs to be removed in order to work properly, this shiny layer is also known as sticky or oily layer.
Not all stampers need priming, always clean the stamper head with lint roller or scotch tape , stamp and check, if u are not happy with the pickup then follow the 👇🏻 steps for priming the stamper
Clear stamper not working? How to prime a clear stamper:
1. Take a bowl of like warm water and another bowl of water in room temperature
2. In like warm water add 1/2 to 1 teaspoon of any liquid dish wash soap and mix
3. Put the clear stamper in the Luke warm water , let it sit for 10secs then gently rub with your fingers and clean.
4. Then put the stamper head in room temperature water and wash to get rid of the soap.
5. Wipe of the water with paper towel or tissue
6. Stamp and check , few stampers work after this itself
7. If they are still not picking perfectly then..,,,,
8. Take a small piece of cotton , wet it with acetone thinner/nail polish remover and wipe gently couple of times
9. Clean the stamper head with scotch tape/lint roller and then start using . It should work great ....
DONOT DO THIS:
1. DONOT use acetone thinner/nail polish remover as it damages the stamper head
2. DONOT BUFF the stamper head as it tears up or loses its transparency and becomes blurry and cloudy, then it’s no more a clear stamper
3. DONOT use regular polishes as it stains the clear stampers
Hope these steps are helpful if your clear stamper is not working or if you want to prime your clear stamper
If you have any questions please feel free to ask in the comments section below and I will be glad to answer them.
Hope you guys like this Clear stamper not working/how to prime clear stamper video
Please like and subscribe
Also share it with your friends and family.
You might also like :
• Dry Marble Nail Art Tu...
• Easy Leaves Nail Art/N...
• Forest Nail Art Tutori...
• Owl Nail Art Tutorial/...
• Colorful Fall Leaves n...
If you want to purchase the stamper head :
Direct website: www. Beaitybigbang.com
Link to clear jelly stamper head :
bit.ly/2EtkX3K
Link to gold stamping plate from amazon:
amzn.to/2nSXWfO
Disclaimer: all products are purchased with my own money and it’s not a sponsored video/review unless mentioned so.
You can also find me on
Instagram: @beautybeam86
Facebook: m.facebook.com...
PR: if u want me to review/swatch your products , you can contact me at BeautyBeam86@gmail.com or dm me on Instagram : @beautybeam86
![АЛАУДИНОВ у Скабеевой: эти их ВСУ нас НЕ ДОГОНЯТ 😁 [Пародия]](http://i.ytimg.com/vi/an0anqU4WGQ/mqdefault.jpg)
Thank you for this tip! Here's another tip for anyone still struggling. When I started stamping, I couldn't pick up an image to save my life! Blue film was off, I was sure I was woking very fast, I tried different scraping directions, rolling vs straight up and down techniques with the stamper, primed the stamper, and tried all different amounts of pressure. Nothing worked! As a last resort, I tried priming my plates! I figured the blue film could be leaving a residue. I used dish soap and a nylon bristled scrub brush and went over the plates for a few seconds each, then rinsed and dried them very well. Shockingly, I could pick up an image the first time and every time after that! Now it's the first thing I do with all my plates. I've never had any damage or scratching from the nylon brush. You only have to do it once if you're struggling to pick up an image. Just clean the polish off the plate with acetone after that. Hope this helps someone else!
Here it is! 🤣
Thank you sooo much for this. Had no idea what I was doing wrong!
I tried this and what the video said, it still doesn’t work, I’ve tried stamping polish regular polish different plates different stampers I’ve now spent well over hundreds of hours and dollars and this doesn’t work
I've been struggling with my stamper . Like nobody ever explained it needs to be primed thanks so much for this video x
My pleasure dear 🤗, tfw and have a fabulous day ahead hon ❤️
@@BeautyBeam86 do you think hand soap would work too ? X
Dish wash soap works the best dear, cos silicon stampers have sticky oily residue on surface, hence Liquid dish wash soap completely removes the oil from the stamper head 💜
Thank you stamping God.
I was having such a horrendous time trying to pickup my design. After priming, my shit stamper now stamps.
This video is a mental life saver. Thanks.
Ha ha ha 😂 glad it worked and saved ur mental health lol 😉
I would be glad if u hit that sub button 😍
I don't know how many videos I watched, trying to figure out how to get my stamper to pick up. Yours worked for me! Thank you so much!
So glad to hear it worked for you dear ☺️
Fabulous explanation, I wish I had seen it before I ruined some of my first clear stampers with buffing😩😩💋💋
Thank u so much sweetie, glad u found it helpful hon, TFW and have a fantastic day ahead hon 💕
I used acetone years ago because another blogger said to use it... ugh
Can I reverse it if I’ve made it sticky @@BeautyBeam86
S u can
S u can
This video is soo helpful!! Straight to the point and well explained!😊
Thanks a tonn sweetie 😘 glad it was helpful ❤️
Thanks so much for this video. My clear stamper doesn't work. I didn't know what to do. After looking your video it works. You saved my day.
Aww glad to know that it worked for u too 😍💜 have a beautiful weekend ahead swthrt 😍
Thanks for this video because I have been trying to figure out what I was doing wrong
Glad it is useful for u hon😍😍, tfw 😘💜
me too
My jelly stamper isn’t working at all and I’m a bit worried, it’s not picking anything up...
Have u primed it according to the video
If u have already primed, may I know whether u r using a stamping polish r regular polish to stamp? And wt brand spanking plate r u using? Cos few Aliexpress stamping plates have etching issues, do try with a different plate and a stamping polish and let me know pls
Thank you so much for this. I do not like the results of buffing and I was having issues with my stampers. This fixed things and I was soooo happy with the after results
So glad to hear that sweetie ❤️ buffing effects the transparency of the clear stamper and that's a bigggg no , hence this is the best way to prime the clear stampers ❤️❤️
I bought a stamping set today and I was struggling, it did worked! Thank you so much!
Awww so glad to hear that dear ❤️ have fun with ur stamping set and have a fab day ahead
I did the cleaning with soap water and that works great, but there are some parts where it doesn’t pick up great. I skipped the acetone step, I’m also new to stamping so still learning xD. Great video btw
I'm glad it worked for u too dear, as some parts are not picking I would suggest to wipe it with acetone dipped cotton pad just once slightly, I'm sure it won't spoil the stamper head, 💟, tfw dear
Beauty Beam86 ok will do that. Ty for your help :)
My pleasure dear 💟
I washed mine with dawn dish soap And warm water it works now yay!!! THanks for this video!!! ❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
Glad to know that it works dear ☺️
Have a beautiful day ahead ❤️
This worked great! I was able to get 3 clear stampers to work for me.
Awww that’s awesome hon, glad it worked for you too ❤️❤️, tfw 😘
I love you dear for this video 😘 I have been struggling with stamps for a long time because my stamp did not want to work, I followed your advice and now everything is great 😍 thank you thank you thank you thank you 😘😘😘👍
My pleasure swthrt, so glad it worked for u ❤️
Very nice information....i am watching videos from 5 years about stamping...but never heard that clear jelly stamper does not need to be buff....and I have buff that🤦♀️ it is cloudy now really
Tfw hon 💗, glad u found the info helpful, always try the clear stampers first, if u have any pickup issues, only then u need to wash them with liquid dish soap & Luke warm water, never buff the clear stampers,
My Beautybigbang, ejiubas, & bornpretty clear stampers worked perfectly without priming or buffing them, tfw hon 💗😘
Always love watching your videos buddy 😁 keep rocking
Thank you…. Thank you… thank you! Clean stamp every time now.
My pleasure dear 🤗, so glad to know that it worked ❤️
Just got my new jelly stamper and watched a different tutorial and that one said to lightly buff. Did that and it didn’t work. Bought a new one and found yours and it works like a charm 🤗. Time to stamp. Thank you for video!
Iam so glad this method works for u dear, it’s a fool proof method, buffing the clear stamper ruins the stamper head as it’s flimsy, but this method gently removes the tacky layer without damaging the stamper head, thank u so much for leaving ur feedback,😍😘
This is really the best way.
Thanks dear ☺️
cool cool cool. Pretty clear difference n noice instructions. Hopefully mine works now
It should dear , glad u find it helpful, have a beautiful day dear 👍🏻😍💖
Did everything you shown even changing Polish but its still not working, and I cleaned the stamp tray with hot water and washing up liquid..
U need to clean it thoroughly with pure acetone and cotton... And don't scrape more than twice once u apply the polish on the image, roll ur stamper gently from side to side r up to down... Donot press the stamper too much it will not pick the image... try these tips that should fix the issue
Thank you for Ur valuable information
My pleasure 😇, tfw dear ❤️💜
to the point and well explained!
ohmigosh i am soooo thankful I wanted this soo badly...
thankyou a lot.... btw you got a new subscriber 👌(●'◡'●)(❁´◡`❁)
Awwww thanks a tonn swthrt 😘 glad it was helpful for you ❤️❤️
Gotta try this
Mine still doesn’t work please help 😭 i have a clear one from born pretty from aliexpress
May I know whether u followed all the steps in priming? And finally did u wipe it with cotton pad dipped in acetone thinner?
Beauty Beam86 I tried washing it with some luke warm water and soap, i have not yet tried it with dish soap. Do you think that makes the difference? I will use the acetone
Yes dear dish wash soap works better than the normal soap, as its best in removing oil & grease, please try that and the acetone as well im sure that has to work
Beauty Beam86 thank you, i will try it with the dish soap tomorrow. I already tried a little acetone and it kinda picked up but still very bad. Thanks for the help
Try and let me know, how it went and also may I know whether u r using a stamping polish? Or a regular polish? Few stampers don't work with regular polish
This is very helpful. Thank you.
My pleasure dear ☺️
Thanks a lot sissy🙏
God Bless You😍
My pleasure dear 🤗 tfw 😍
thank you I really appreciate this info
My pleasure dear ❤️ have a beautiful day ahead
I was be crazy thank u a lot l wilk try tomorrow
My pleasure dear ❤️
Great information 👍🏻 great video .. I just back in to stamping so this will come in handy x
Thanks a tonn hon, glad it’s useful for u 😍❤️, tfw ❤️💜😘
So I've tried stamping a few times over the years and it might come out good for the first two nails and then gives trouble after. Initially I didn't know about priming until I checked UA-cam. So I decided to try again with new stampers, did what the instructions said and had the same issues, first one was good and then problems after.. I was wondering if it was due to cleaning the stamping plate with nail polish remover not acetone between uses(no one really mentions what they do in their vids).. Tape won't get into the grooves of the plate. I even tried waiting for the plate to dry from the nail polish remover but didn't help. So I've put away my stampers and plates for years now but I wish someone could help me figure out the problem because seems like a waste to have them there doing nothing. Thanks for the vid btw
Okay I figured out the issue dear , u have to clean the Stamping plate with pure acetone , as nail polish removers have moisturizing oils in them, they hinder the stamping , and few stamping plates are etched deeply, and the Mimute cotton threads get stuck in them at times, so once u finish wiping it with cotton dipped in acetone, use ur finger and gently rub the plate where u wiped in circular motions, this removes all those cotton threads that got stuck in the plate , and Iam sure this should fix the issue, try and let me know
@@BeautyBeam86 ok thanks alot, I will try it when I have time and see. I will let you know how it came out when I do.
My container of the clear stamper suddenly turned Matte. How do I fix it? I am very very upset rn pls reply me fast...
Did u clean it with acetone.?? If yes dry to say u won't get the transparency back dear, try cleaning it with dish wash soap in luke warm water and towel dry it
Thank u so much.
@@o.o.679 is it fix?
@@Auxiliawack I mean it did get some what clean but it won’t come back entirely..
Try applying a little oil with a cotton pad, it will help a little, but not entirely
I don't have liquid dishwash what to use then
Try a mild face wash / hand wash dear
Very grateful tip!! It helped a lot 🙏
Glad to hear that dear, 💜💜
I tried everything even priming both the plates and stamper but still the stamper didn’t work help me!!! I really wanna stamp my nails
May i know whether u r using stamping polish r regular polish to stamp ?
And if u r using a non stamping polish the polish need to be a bit thick in consistency and not too runny
And once u apply the polish on the plate scrape it only twice , then try loving it up with stamper
Donot press the stamper too hard, a gently rolling motion is enough to pick the image , if u press the stamper too hard it will not pick the image
And once u scrape , be as quick as possible to pick the image else the polish dries on the stamping plate
Finally once u pick the image clean theplate with cotton and pure acetone, acetone with moisturizing properties should not be used for cleaning stamping plates as the moisture will make it slippery
Some times the cotton threads might get stuck in the stamping plate, so once u clean with acetone and cotton, just wipe the plate with bare fingers to take off the fine cotton strands that get caught in the plate
Hope these points will be helpful in trouble shooting the issues u r facing with stamping,
Try these and still if it doesn't work out pls let me know
How do you clean stamping plates?
Use pure acetone dipped in cotton and u can clean the stamping plate
How to use jelly stamper with gel polish kindly guide me plzz
Sure... Apply the stamping gel polish on the image of the stamping plate and scrape with the scraper for 4 to 5 times then press the stamper head gently, like feather touch and pick the image,
If u put too much pressure in picking the image, the image becomes blurry, as gel polish doesn't set thik u cure it
.
.
If u have any doubts pls ask, will be glad to clarify 😍
My stamper doesn't work is it because I'm using regular mail varnish and not stamper nail polish
Have u primed the stamper as shown and even after that it doesn't work?
If yes try a regular polish that's a bit thick in consistency and
Once u apply polish on the Stamping plate only scrape the polish twice, as regular polishes dry pretty quick
Donot press the stamper too hard on the plate, just roll the stamper head gently from top to bottom r from side to side , this helps in picking the image
Try these steps and lete know dear
Like 24, its cool and informative video, well explained, great upload, i traveling these days so i late dear, full.watched💐💐💐💐💐💐💐💐💐💐👌
Thanks a lot jee, no probs I know u will watch the video for sure, tfw 😍😘😘💜❤️
Very. Very helpful video thanx for sharing 😘😘😘
😍 thanks for watching hon,💜❤️
thank you for sharing.. it really works...
Glad it worked & was useful for u dear 😍😍💜
Thank you for your helpful video 😊😊😊
My pleasure dear, glad it was helpful for u, have a beautiful day ahead 💜💙
s my stamper not working because im pressing too hard to lift the images? I've watched 13 videos and still cant do it right. so frustrated >.
So sorry to hear that , just follow these steps dear
Apply adequate polish on the image , and scrape only twice
Donot take too much time once u scrape it, keep ur stamper handy and be as gently as u can and try rolling technique
Ex : from left to right / or from up to down like that
U just need to make sure the stamper head touches the stamping plate , donot put much force
Hope this helps
If that doesn't work , help me with ur other ig r email so that I can send a short video
What we do when my clear stamper is loss his transparency pls reply me fast.😔😔
Sorry dear once the transparency is gone u cant get it back, u can just use it as a normal stamper ☹️
I did as the same as you said but still its not working. Do you have any other methods.
May i know what is the issue u r facing after priming the Stamper,?
Any improvement r it's just the same
What to use in place of acetone
Thanks akka helps alot
My pleasure dear 🤗
Thanks for the video, can I know from where did u buy the stamp polish ?
Stamping polish is from www.bornprettystore.com dear, tfw
amazing. thank you!
Glad you liked it!TFW and have a fabulous day ahead
Great video, nice tips!
Awww thanks a lot sweetie, tfw😍❤️😘💜
What if you used acetone or nail polish will it not work?
If u use acetone or nail polish remover too much on the silicon Stamper head, it will become blur and loose its transparency, and the Stamper head also tears off because of acetone
Thank you!
My pleasure 💖tfw
Omg, When will the tutorial begin? Finally. And thank u
Great tips!
Thanks dear, tfw😍❤️👍
Good tips Hun! Tfs! 😍💖
Thanks a lot dear, tfw😍😘❤️💜
Thank you for sharing this is a very informative video🙏🏾🥰🥰🥰
Subscribed👍🏾😊
Awwwwww thank u so much sweetie 💕💕, glad it was useful for u
Beauty Beam86 much appreciated and well explained, looking forward to your next video have a wonderful evening🙏🏾🥰🥰🥰
hiii does this work with gel polished cause it can’t pick up :(
Yes it will work, pls give a try 💚
I have a CLEAR stamper BUT my stamper is have blur, I try dishwashing soap and water BUT its be again have blur how I be this again clear?
Please helppp
Sorry dear, I think u have buffed ur stamper with a buffer, or upon regular usage the clear stamper becomes blur.
once it's blur u cannot make it clear again 😔
@@BeautyBeam86 😔☹
Great tips... Thank you for sharing 😘😘
Thank u so much for watching dear, 😍❤️😘💜
wow very nice upload...........your way of talking is so impressive full watch
Awww thank u so much frnd, tysmfw 😍
Thanks for helping
My pleasure dear , tfw and have a beautiful day ahead dear 👍💜💙
What else can use instead of dish washing liquid ? Can i use washing powder
No o don't recommend that dear, hmmm try hand wash r any liquid soap
Dish wash powder will scratch ur stamper head badly, try getting a small sachet of dish wash liquid as that works wonders in removing the sticky layer/oils on the stamper Head
@@BeautyBeam86 ok thnks for reply 💖
Should we can do stamping with regular polish I am from Pakistan and I have ordered stamping kit from Ali express and I have tried with regular polish so its not picking the image
In Pakistan stamping polishes r not available
U can use regular polish but it should be a bit thick in consistency
Not too runny, and fast dry r quick dry nail polishes don't work
Later U can buy the stamping polishes from Ali express too dear
Prime the stamper as in the video and try it should pick up
Try different brand nail polishes few work few don't
Great video!
Thanks a tonn hon 😍❤️👍
Lovely review hun. TFS 😁🙋🏻💕
Thank u so much love, tfw😍❤️
Will it really work?? I think so!! Please tell me so that we can stamp beautifully btw nice tips
It will certainly work hon, give it a try , thank u so much for watching 😘🥰
I did this just now
Hope it works ☺️
R u using regular polish r stamping polish ?
@@BeautyBeam86 I watched another video
It was because Im a new user and I didn't peel off my stamping plate blue peel 🤡
Sorry I'll edit or delete my comment
That's fine dear , not an issue , as long as it worked for u, iam 😊
Sorry for the late reply,
Where I can buy acetone ?
U can buy it at ur local fancy stores , r u can also get them online from Amazon r Flipkart
Do you think this would work for a clear stamper head that used to pick up beautifully but now does not?
It should! Silicone releases a sort of oil as it ages which can require re-priming to remove
Yes dear it will work, 😍
please answer me because i have an important qwestion ( so my stamper isnt picking at all and how can i fix it please answer because i have switched like 4 clear stampers and they are all like that one
Sorry to hear that but first may I know whether you followed the Instructions in the video? Pls answer this so that I can suggest accordingly 💗💗
Really helpful video
Glad u find it helpful hon, tfw😍❤️😘
By mistake I had cleaned my stamper with nail polish remover now it is not working what to do pls tell me a humble request
Try priming it as shown in the video , may be it might work
If u clean it with nail polish remover once that won't be a problem, try washing with soap water in luke warm water & then with normal water as shown in video
Sorry I forgot to tell you there was paper which has written if your stemp is not working than buff it and I buffed it a few times will this idea you have gave will work
Clear stamper loses its transparency if u buff it, however it should help in picking the image, try the method suggested in my video dear, it should work
Yeh it worked di thank you so much
K thank you
i want to know something that is i hv regular polishes nd my stamper is not pickng up them shuld i prep my stamper or i hv to buy samping nail polish.... but i dont want to buy nail stamping polish... i also preped my stamper still its no working only one tym its worked
If u r using regular polish make sure it's a bit thick in consistency, if it's tin it won't pick up well, once u prime the stamper it has to work well, don't use fast dry nail polishes for stamping, stamping polishes work best , but few normal polishes work too
Can i use dehydrated instead of primer
No use pure acetone to wipe the stamper head
❤️
I know this video is old but what do I do if I stamp with a stamper, it works fine, then I go to stamp the other nail with the same stamp and the second time around it won't work. It suddenly won't pick up any polish so I tried my other three stampers and nothing. So I cleaned the plate and tried again and still nothing.
as it was fine the first time i guess u need to clean up the plate well, few design etchings are so deep they need to be cleaned properly, also use 100% acetone thinner to clean the plates as the acetone free nail polish removers have moisture it hinders the pickup of the stamper , hope this helps ;)
@@BeautyBeam86 thanx for trying to help but I did that with cotton and then with a toothbrush with pure acetone and still nothing. And to b totally honest it happened with every design on the plate. They worked perfect one time then never again. I even cleaned the stamper in warm water with soap. The plates themselves r so clean they almost look brand new. I've tried it with a light touch, a heavier touch, rolling the stamper over the image, putting the stamper straight down on the image, different stamping polishes, regular polish, nothing works. I literally sat for almost 6 hours yesterday doing everything I could think of. Nothing. I have 4 different stampers and none of them worked but the stampers worked on other plates.
Karen Salveson may I know whether they are branded plates or did u buy them from aliexpress ? Cos few non branded plates from aliexpress do have this problem as the etching was not so good on the plates, only Normal squishy old stampers work , try them out , cos as u r cleaning the plate thoroughly & the stampers work with other plates , issue must b with the plate
Karen Salveson also if u can send a pic of the plate & the way the stampers pick, to beautybeam86@gmail.com , may be I might figure out the issue
I washed and do all what you have told but still my stamp not transfer design
May u know whether u r using stamping polish ? R regular polish?
And have u tried it on a different stamping plate , few stamping plates if the etching is not properly done u will have issues in picking up no matter how good the stamper is
Beauty Beam86 I am using simple polish I tried each and everything but no work kindly guide me personally I am so much depressed I send a lot or money on it 😥😓😓😓
Sorry to hear that dear, stamping polish will be a better option, or try using a nail polish which is a bit thick in consistency, also may I know whether it's picking a little r not picking at all ?
Beauty Beam86 picking very little or picked some times but not to clear
Nail stamp polish is not available in my area and it’s quiet expensive 😓
1.Try with polish that is a bit thick
2. If the polish dries too quick it won't pick up
3. Clean the stamping plate well , so that the dried up polish doesn't get struck in the design
4. Finally try wiping the stamper head with the acetone dipped cotton/wipe with 3-4 wipes
It didn’t work for me, but thanks for the advice 😕
Sorry to hear that hon, it works 90% of times 🙄
Thank you works perfekt
Glad to hear that hon, have a fabulous day ahead ❤️😘
Can you pls make vedio how to make stamper at home or just anybody has suggestions
Oh dear I'm sry to say that it's not easy to make a stamper at home, rather I would suggest to buy one, now a days stampers even clear stamper is cheap ,
If u r from india u can get it for 150 to 200 rupees, if u r from any other place I can give u links to buy one at a cheaper price
do you have to wash in dish soap each time you use ? sometimes it works other it does not pick up image
Not necessary dear, once u prime it that would be enough .
May I know whether u r using stamping polish ? R regular polish ?
Cos regular polishes won't work of they are too runny in consistency, it has to be a bit thick in consistency to stamp
@@BeautyBeam86 thanks for response. i am using staping polish from ebay. sometime the images pick sometimes they dont
Okay few polishes dry quick before u pick up , try with a regular polish and check whether the stamper picks dear , and try a different stamping plate too , as it's pocking at times I guess the issue must be with the stamping polish r ,
Few tips:
1.After applying the polish on the image swipe only twice ,
2.Try different techniques to pick up , one is rolling technique and the other is a quick press with slight pressure on the image
3.also few stamping plates while u clean them with acetone and cotton the cotton gets stuck in the images,so clean the plate properly ,I had this issues with AliExpress stamping plates
Try and let me know dear
@@BeautyBeam86 thanks dear. will try
my stamper picks some designs but not detailed ones.what to do please help .
Try a different scraper, a flimsy one, and scrape in slanting position , it helps with the intricate designs, hope it helps 😍
I hv used acetone now wt can i do
Even after using acetone it's not picking up?
@@BeautyBeam86 no.....
Kindly tell me what to do now 😔
Acetone is the only option dear
So did u use na gel polish instead to stamp?
I used a regular nail polish and also showed u by using a stamping polish too ..
@@BeautyBeam86 oh, I thought ur using uv nail gels.. Thanks for replying. 💖💖💖💖
🤩 my pleasure dear
Question... At the beginning of the video you said not to use acetone to clean it but then you used acetone after you cleaned it... Why? Will the acetone not ruin the Stamper? Thanks!
S acetone tends to break the silicon stamper head, most of the stamper heads work after priming as shown in the video , if it's still not picking up perfectly, then used a quick wipe with acetone & lint free wipe r cotton, so that it takes out the oil residue on the stamper head .
Regular usage of acetone on clear r silicon stampers definetly ruin it
@@BeautyBeam86 Okay!! Thank you!! Do you have to do all these steps in between every stamp? Or do you just wipe the stamper off on paper towel?
All the steps necessary dear, the dish wash soap and Luke warm water really helps in removing the oils on the stamper head
@@BeautyBeam86 okay thank you! What about the stamper plate? How do you clean that ?
U can clean that with pure acetone, don't use moisture based acetone as it will hinder your stamping process , pure acetone for cleaning the stamping plate is best
Wow this is great 😘😘😘
Tfw hon 😍😘💜❤️
Où puis je l’acheter ??
u can buy from www.beautybigbang.com r www.bornpretty.com
their stampers are awesome
vous pouvez acheter sur www.beautybigbang.com r www.bornpretty.com
leurs tampons sont géniaux
D’accord merci beaucoup
Thank you mam🥰🥰
My pleasure dear, glad the video was helpful 😍
How would you clear up the foggy if u used acetone
Once the stamper head is blurred after usage , we cannot reverse it dear ❤️
I watched one video where they turned it over and used other side. Another video a lady sliced it to make it fresh again
If u slice it the surface will not be smooth, and hence u will not be able to pick up the image properly.. even if u turn it and use it as the other side will be flat it will be a bit hard to pick the images, and even from the other side it will still be blurry ...
You saved our lifes
I'm glad the video is helpful hon, have a fantastic day ahead 😘 ❤️ 💜 and happy & prosperous new year 💖💚😍
@@BeautyBeam86 gosh u are so kind, thank u soso much. And very happy new ear for you too. Love❤✨
Great tip.. TFS☺️☺️☺️
😍😘 Tfw hon
why doesn't my black polish work when stamping?
May I know which black polish are u using dear? Is it a stamping polish? Or a regular polish? If it is a regular polish it has to be a bit thick in consistency, so that it stamps well and shows up.
@@BeautyBeam86 it's a regular polish. D.R.L. brand
U from India? If s u can try camera, the essence nail polish for stamping they work great, essence is the best I would recommend 💟, hope it helps
@@BeautyBeam86am from india but i actually live in zambia and unfortunately we dont have many brands of nail polish here :(
@@BeautyBeam86 will D.R.L brand not work? because i have it in white as well. i was thinking all black polishes would work because they're opaque?
Do we have to clean it after every in the water?
No dear, priming is done only for the new stamper heads when they don't pick up properly, u can clean it by using long roller r sticky tape
@@BeautyBeam86 thank you
Does it work on rubber stamps too?
It will dear ❣️
@@BeautyBeam86 thank you
They have stamping polish???
Yes they do
@@BeautyBeam86 does it say it on the bottle? Omg, this is new to me..😆, imma have to find some.
Yes it's mentioned on the bottle and here is the link for the born pretty stamping polishes : bit.ly/2Kgxg79
Hope this helps, and u can also use my code DVSH10 for extra 10% off on ur purchases 😍
@@BeautyBeam86 wow, never knew, thank u...
My pleasure dear 🤗
It's not working even after priming
Do NOT use acetone on the stamper! If just soap and water isn't doing the trick apply a coat of nailpolish to the stamper, let it dry and then peel it off.
Only try with a clear nail polish, if u use color nail polishes it will attain ur stamper head,
And more over the damage with giving a quick while with acetone & cotton pad is much less than applying the nail polish on the stamper and letting it dry
@@BeautyBeam86 Not my experience. Acetone is way more agressive than nailpolish (which only contains a small amount of Ethylacetate/Butylacetate) . So one wipe with acetone does more harm than using the nailpolish method 10 times.
Which ever works best viewers can use that, iam not saying that's the only method u can do it, I'm just sharing a method that worked perfectly for me and dint damage my stamper in the mean time, if a clear nail polish works well, y not use it ,
However i did not try that method, so not sure abt it
Wowwww nice one 👍👍👍
Tfw dear 😍😘💜
Do I have to do this every time I want to use my stamper?
No dear only once for the first time r of u have issues with ur stamper, rest of the Times, u can clean ur stamper with sticky tape r lint roller
@@BeautyBeam86 Okay, because I already did it and it works only sometimes. So I do it like in the video and then stamp the thing on my nail...what do I do next if it's dirty? Clean it with tape and then it still should work?
S it will work, just use the sticky side of the tape and press the stamper head on it, that will take away the remaining print on it and u can use it for the next use
@@BeautyBeam86 it doesn't work 100% every time but it's better, thank you
My pleasure dear, also try these tips
1. If u are using a regular polish, scrape only twice after applying polish on stamping image,
2. Donot press the stamper head hardly on the image to pick up,
U need to gently / or very lightly press it on the image r try rolling it gentle from top to bottom r from left to right and so on
This method helps in picking the image flawlessly
3. Once u scrape the excess polish from the image , immediately use the stamper to pick the image, if u r doing slowly there is a chance the polish dries up in the image and ur stamper doesn't pick it
4. Clean the Stamping plate thoroughly after every use with acetone and a piece of cotton r cotton pad,
After u wipe it clean, also use ur fingers and gently rub in circular motion on the cleant image, at times the cotton gets stuck in the image , so there are chances u will get thin threads of remaining cotton that stuck in the image , which prevents u get crisp image
Iam sure these tips will be helpful
And last but not least , stamping polishes work better than regular ones
Donot use quick dry r fast drying polishes for stamping, they donot work