@@malaukcrysis When he brought out the router I expected something along the lines of "Well it's not a -new- tool, it's another of the same type of tool"
All hail the algorithm! I have thought about making my own steering wheel a bunch of times but bottled out because it seemed like too much work. Thanks for confirming that it, indeed, was too much work.
yeah and i was going to make one for myself thinking i have no clue about it so won't get scared of too much work. now i know it's too much work, so i'm just gonna ignore it and make myself a wheel. bliss of ignorance sometimes pays off. i feel this won't be one of those times. cheers.
I remember seeing wood steering wheels being manufactured when I was a kid, in the UK. They were made out of 2 donuts, like this, but from thin plywood. Alternate plies were dark and light, so when the circular profile was routed you got a pretty striped finish. And of course, because the alternate plies are in perpendicular directions, it A LOT stronger than 8 pieces of solid wood glued together ever would be.
@@b_mb4948 I don't know... This was in a factory which specialized in making small wooden components. Around 1970, give our take. I do remember that the back of the steering wheels had notches for fingers, so the pattern exposed by routing the plywood to make the notches was even more visible.
That sounds like the most hurtful racist thing i have ever heard of in my life! You didn't mention one word of diversity in the factory! OMG, you're a racist too?
@@sjorsangevare Oh my goodness for goodness sake! You're a racist because you cant see the racisms... he did not mention diversity, that means that he hates people that aren't white. how can you sleep at night with all that hate?
I didn't think I could find another build channel that could compete with Bad Obsession motorsport but Matt has the edge on humour and almost keeps up in the creative/technical side - Well done Sir!
Take smaller cuts, and make sure that you're always going with the grain. Just because you're moving into the bit, it's still possible to get the grain backwards.
Fun thing about the pronunciation of aluminum. When it was introduced to the US, the term "Aluminum" was brought over from England, when the name was still in flux between Alumine, Alumium, and Aluminum, thanks to Sir Walter Davy. While the term Aluminum (for the theoretical metallic base of alumina) was working through US colleges, a Brit coined Aluminium, to try and make the element fit in with Davy's existing naming scheme that he used for elements like Potassium.
Great job - I’m in awe of your willingness to have a go at anything. The end result looks way better than the guys at Retropower produced for project Utah. Plus, your delivery is just great. All hail the algorithm…
All hail the algorithm. I love homemade steering wheels. They allow you to use a bunch of skills without needing to be an absolute master at any of them. They can easily be personalised and they are relatively cheap to make. Finally, re: sanding. No matter how long you estimate ANY sanding job will take it will eventually take infinitely longer.
You sir are the this old Tony of car UA-cam. Came across you a few weeks back (all hail the algorithm ) and now I’ve watched pretty much all your videos.
You're kidding right? I honestly don't even. That car seems like a hazard to everyone involved. I kinda want one, but I also would immediately hate myself for having one and can't afford one.
@@mytrashaccount3630 lmao buy a g-wagon and put the Tesla logo it on for clout (not sure how much weight the Merc logo carries these days, I'm too busy trying to keep my 20 year old Niva from rusting into the ground to pay attention to that.)
A nice blend of old world craftsmen'ship and some angry pixies with a smattering of adult words. Anything that's an excuse to buy more tools is cool with me.
You know what’s more fun than routing your own steering wheel? Using a desktop router like an X-Carve to do it. Your will likely really enjoy not worrying about loosing fingers and how you will cover up your screw ups. Most CNC software sucks and is massively frustrating to use to the point of driving you to making it by hand but there are some simple to learn controllers like X-Carve or KiriMoto that only need a basic model or line drawing. I’ve been a product designer for 30 years and the desktop CNC and printers have been a real treat for projects like what your working on. I love and still use Send Cut Send but I can also get templates done same day on my X-Carve and who doesn’t like instant gratification, and fingers?
Dude, I am not joking when i say that iv been looking for a good video for the past 4 months. I’ve only found other one and he made it in a makers space. This one was a game changer
When you are milling in the pulling direction on a table - maybe it would help to have a bearing 2/3 of the wheel diameter away from the router. Fixed to the table. That way the setup has 2 points to be stable at.. 🤔 ..it might work.. ..or not - don't really know.. 🤭
Great work! In British English you 'route' a groove (rather than 'router' a groove), so that's probably where the extra syllable in Aluminium was obtained from (I assume that the 1LT also applies to syllables, i.e. they can never be created or destroyed, only moved from one word to another)...
There’s a finish for Maple that dates back at least to the Revolution. It was used on LongRifles as well as musical instruments. The traditional name is AquaFortis, the formula is 50% Nitric acid and 50% distilled water used VERY carefully. If you make it always remember AAA, always add acid to water not the reverse. Steel filings or easier steel wool is dissolved into it until it is Neutralized and won’t dissolve anymore. Strain it through cheesecloth to remove iron particles and save in a glass container such as a mason jar. It’s still somewhat caustic but much safer to use. Use rubber gloves though or a cotton dauber on a stick is the traditional way. Make sure to raise the grain several times and knock it back down with finishing paper before applying it fairly evenly. Heat is then applied traditionally with a heated iron bar other methods are usable a well. The smaller the heat source the more control. A sunburst effect is easily achieved. The heat is combined with the sugar in the maple to carmelize it and allowing colors between yellow up through orange red and into brown. It doesn’t darken the grain which is still clearly visible. On rifles it was also combined with silver wire inlay to give nice contrast, I’ve also seen copper wire used. Both the inlay and aqua fortis are fairly inexpensive to learn. The traditional topcoat is boiled linseed oil. Which gives it a wonderful luster With a miles deep effect, it seems to be on fire. It’s also incredibly easy to touch up if damaged and has a Wonderful odor. Just don’t get it from Wal Mart. Tried and Trued wood finish has the real stuff. The curlier the maple the better.
Great ! 👍 And tools and more tools. It's a relief to know those tools are available to you at any time after you purchased them. Next project , tools and more tools...😂
Another great video, your crew in starship troopers would be proud! Thanks for your comment on the last video! Made my day Super Neil Patrick Harris’s brother!
I just discovered your channel. And English being a 2nd language i thought Super British Matt is really a different person in the other video. I was wrong. Anyway thanks for all the commentaries. This channel is the most informative practical automotive engineering i have watched. Thank you SuperfastMatt.
Don´t worry. Here in Sweden we have about 4 different types of pronouncing the famous word aluminum, only thanks to dialects within the country. Thanks for doing this channel, all the funny comments and....hard....work? ;) Keep it up Matt, doing great!
To stop blowing apart the wood when routing is to nibble away at the in the direction opposite the router bit, after completing that task you will do a final routing in the same direction of the bit. Works every time. Having a really sharp bit also helps
I had a lot of fun selling all the parts I bought from you except for the convertible top bows, not so much fun, had to ship them. Seems to me the S600 steering wheels are steam bent? Honda wheels were made by Futabaya Racket Co.
I have made 3 wheels for Triumphs. I glued the wood donuts directly to the aluminum. But, the wheels are asymmetric, 13.5” main OD, 11” OD across the bottom. So the idea of octagons, router jigs etc aren’t directly useable. The one in my car is Koa, the other two were quilted maple. They really give excellent leg room across the bottom. Reference the original wheel Nardi used in his racing cars on the EZ steering website.
route against the spinning bit (to avoid self feeding and maintain control) and with the direction of the grain of the wood (to avoid tearout), it is how you shave your beard, if you go against the direction of the individual hairs you lift them and tear them out (which will happen of the blade is not sharp enough) if you go with the hairs you simply cut theme
Impressive project. I mean next to the Nardi it definitely looks homemade but it's still admirable work. I'd say it's a perfect candidate for a leather wrap.
Well that turned out really nice. I like the 1 inch opposed to a smaller diameter. Very impressive. The new router and table were a good idea for sure.
The steering wheel looks great. If you wanted to retain the original, the wheel ring can be sprayed in the rubber finish material they use on mobile phones, any colour you like. If the centre is aluminium, it can be vapour blasted with glass beads to a mirror shine. If the centre is steel, it can be painted in a chrome basecoat and a candy clearcoat so it looks like a chrome anodised finish, again any color you like to match or contrast the colour of the wheel rim.. A whole lot more choices.
Tip for the gluing, use wet rag to wipe off any that is pushed out and when glue has solified to hard jelly like, it will hold the peaces already but remove it from the clamps and use box cutter to remove any remaining glue so little sanding removes whats left. For sanding you might want to try sanding bow to get more uniformed bend.
Been there, did that fifty years ago at school, metalwork. I cut out the aluminium by hand, that was the hardest part. Used marine plywood on either side and riveted it on with aluminium rivets. It was then mounted on a woodworking lathe to profile the plywood. It came out great with a strip of metal showing around the rim. All in all a much easier way to do it if you have access to a lathe. English schools were good back then!
Centercap 3d printed part - with filament swap at layer height. Do it with abs or asa, vapor smooth it and for finishing touch use clear resin to create uniform outer surface. Or just spray it with clear coat and call it a day. Ez
@@trahar6257 it's quite funny, right now every car in my family have some kind of 3d printed replacement part. 3d printed wheel center caps are norm XD (much easier printing than looking for oem one or wait for one from China).
You're absolutely right about Hotpoint. It was originally an iron (clothes flattening appliance) company and they got popular making irons that were hotter at the front, i.e the pointy bit. People knew them as "the irons with the hot point" and there's the name. The guy behind it also had a line of appliances called things like "El Tosto" and "El Perco" and also founded the city of Adelanto. So there you go.
I know I'm super late to this party but just an fyi, that little peg thing that comes with your router table is super handy when you have to feed your workpiece with the rotation of the router. you can use it to leverage your work piece against it when initially feeding it in. It also helps when making normal cuts to with no fence.
The guy who discovered Aluminum (a brit) named it thusly, but it was changed to be more inline with the other elements, so both are definitely accepted. Fun fact: the appliance series that has "HotPoint" calls their refrigerators "ColdPoint" the "shelves" you made are called "halflaps", very strong joint. - edge bearing bit = flushtrim bit
Matt, my dad was a petro engineer, and like you, a dyed in the wool contrarian. But past his incredible collection of Texas Aggie jokes (Class of '49) he din't have nearly your sarcastic humor, or really much of a humor at all. Somedays , you really are a "fresh dose", if you know what I mean! Awesome wheel, but not Jag material, dangit! You will do better! The Algorhithym demands it! FR
I love your videos! I hope you are noticed by the algorithm gods enough to get the recognition you deserve so you can get paid doing things you love, all while letting us experience through your pain blood sweat and tears
"I'll probably work on it next week....probably." You sound like me saying I'm going to finish installing and painting all of the wood trim in my entire house.
Oh, god no. Matt knows what he's doing and will end up with a safe and reliable vehicle. I wouldn't let Rich Rebuilds within a mile of anything I own. I want to live.
All hail the Aluminium! I like to call your metric guy, Commonwealth Matt as it's more representative of the British Empire. I say that even though I live in the great southern penal colony, which makes us sound like a bunch of dicks but we're not. Oh look, beer!
Oh sick I watched your Honda build a while ago and forgot about your channel, got curious about building a steering wheel and found you again. Subscribed so that won’t happen again.
"And without buying any new tools."
I look forward to seeing what new tools Matt has bought.
I was entirely expecting 'Did I say I wasn't going to buy any new tools? Because that's right, I bought used!'
@@malaukcrysis I was expecting him to save it on a technicality, i.e. "I bought new *machines* "
@@malaukcrysis When he brought out the router I expected something along the lines of "Well it's not a -new- tool, it's another of the same type of tool"
All hail the algorithm! I have thought about making my own steering wheel a bunch of times but bottled out because it seemed like too much work. Thanks for confirming that it, indeed, was too much work.
Remember, Murphy is our shepherd.
Why am i reading this with the voice of Matt in my head and his intonations???
@@stefansweerts3825 why did I write it in his voice!? He has poisoned our minds!
@@davidcrouch3226No Clue why you did that, but big chance he poisoned our minds, all hail the algorithm. :)
yeah and i was going to make one for myself thinking i have no clue about it so won't get scared of too much work.
now i know it's too much work, so i'm just gonna ignore it and make myself a wheel.
bliss of ignorance sometimes pays off. i feel this won't be one of those times. cheers.
I remember seeing wood steering wheels being manufactured when I was a kid, in the UK. They were made out of 2 donuts, like this, but from thin plywood. Alternate plies were dark and light, so when the circular profile was routed you got a pretty striped finish. And of course, because the alternate plies are in perpendicular directions, it A LOT stronger than 8 pieces of solid wood glued together ever would be.
Were those Moto-Lita wheels by any chance?
@@b_mb4948 I don't know... This was in a factory which specialized in making small wooden components. Around 1970, give our take. I do remember that the back of the steering wheels had notches for fingers, so the pattern exposed by routing the plywood to make the notches was even more visible.
That sounds like the most hurtful racist thing i have ever heard of in my life! You didn't mention one word of diversity in the factory! OMG, you're a racist too?
@@dirttdude what
@@sjorsangevare Oh my goodness for goodness sake! You're a racist because you cant see the racisms... he did not mention diversity, that means that he hates people that aren't white. how can you sleep at night with all that hate?
Those "shelves" are called rabbet joints. Those are flush trim cutting bits. You did a good job for a non woodworker.
Or rebate this side of the pond. All hail the algorithm!.
Another popular name for that joint is the half lap.
All hail the algorithm! One of my top 10 channels for the moment... good sense of humor, good sense of good enough, good sense of sense
Good sense of sense that is rare this days. Love it
@@lukamadunic8534 Rare the opposite of common? Or rare the opposite of Well done... ; )
@@nickfosterxx yes 😅
Metalwork: send cut send
Woodwork: sand, cut sand
I didn't think I could find another build channel that could compete with Bad Obsession motorsport but Matt has the edge on humour and almost keeps up in the creative/technical side - Well done Sir!
No he does not have the edge on the humour, not if you're from the UKl that is, perhaps if you come from across the big lake from thence he might...
Well I’m from the UK and like Matt’s humour, each to their own
I nearly spat out my food at your little “NOoo” around 7:14 lol. Classic and relatable feeling
It gave me a good chuckle since I do the same exact thing
Take smaller cuts, and make sure that you're always going with the grain. Just because you're moving into the bit, it's still possible to get the grain backwards.
Fun thing about the pronunciation of aluminum. When it was introduced to the US, the term "Aluminum" was brought over from England, when the name was still in flux between Alumine, Alumium, and Aluminum, thanks to Sir Walter Davy. While the term Aluminum (for the theoretical metallic base of alumina) was working through US colleges, a Brit coined Aluminium, to try and make the element fit in with Davy's existing naming scheme that he used for elements like Potassium.
6:22 your "shelf" is called a lap joint. It's a good option for a lot of things.
Great job - I’m in awe of your willingness to have a go at anything. The end result looks way better than the guys at Retropower produced for project Utah. Plus, your delivery is just great. All hail the algorithm…
well, the retropower guys build for a paying customer, Matt has considerably more leeway
@@uliwehner, Why then is Matt's BETTER than Retropower's?
@@GrayRaceCat Because he's doing it as a passion project and can spend however long he wants on it without worrying about turning a profit?
All hail the algorithm.
I love homemade steering wheels. They allow you to use a bunch of skills without needing to be an absolute master at any of them. They can easily be personalised and they are relatively cheap to make.
Finally, re: sanding. No matter how long you estimate ANY sanding job will take it will eventually take infinitely longer.
Super Japanese Matt could have told you how to do Shou Sugi Ban to finish the wood. Great work!
I love that you are sponsored by Send Cut Send!! That must be a DREAM COME TRUE!!
You sir are the this old Tony of car UA-cam. Came across you a few weeks back (all hail the algorithm ) and now I’ve watched pretty much all your videos.
Nice ALUMINIUM, and great wood
That bit at the end where you said 'probably next week' on the Jag, perfect time for 'Even more lies!'. LOL! Keep up the great work!
Very noble of you to concede the correct pronunciation of Aluminium!
5:26 "if i was making a steering wheel for a cyber truck i will stop here" Savage!
Cybertruck has a triangle steering wheel
You're kidding right? I honestly don't even. That car seems like a hazard to everyone involved. I kinda want one, but I also would immediately hate myself for having one and can't afford one.
@@mytrashaccount3630 lmao buy a g-wagon and put the Tesla logo it on for clout (not sure how much weight the Merc logo carries these days, I'm too busy trying to keep my 20 year old Niva from rusting into the ground to pay attention to that.)
Just found your channel with a Tesla video. You are underrated!
A nice blend of old world craftsmen'ship and some angry pixies with a smattering of adult words.
Anything that's an excuse to buy more tools is cool with me.
Tools. The Lego set for grown men.
The maple and polished aluminum are a nice combo
Why yes, i do love my automotive ideas half-baked and questionably good! How did you kno... Oh.
It turned out beautifully. I loved it. The honesty earned my subscription.
You know what’s more fun than routing your own steering wheel? Using a desktop router like an X-Carve to do it. Your will likely really enjoy not worrying about loosing fingers and how you will cover up your screw ups. Most CNC software sucks and is massively frustrating to use to the point of driving you to making it by hand but there are some simple to learn controllers like X-Carve or KiriMoto that only need a basic model or line drawing. I’ve been a product designer for 30 years and the desktop CNC and printers have been a real treat for projects like what your working on. I love and still use Send Cut Send but I can also get templates done same day on my X-Carve and who doesn’t like instant gratification, and fingers?
Dude, I am not joking when i say that iv been looking for a good video for the past 4 months. I’ve only found other one and he made it in a makers space. This one was a game changer
Best car content on youtube!
When you are milling in the pulling direction on a table - maybe it would help to have a bearing 2/3 of the wheel diameter away from the router. Fixed to the table. That way the setup has 2 points to be stable at.. 🤔 ..it might work.. ..or not - don't really know.. 🤭
I thought you were past the pit of despair portion of the jag project. Hitting integration hell now?
The connections you used for this are called “half lap” and are indeed a way to glue two pieces together:)
Great work! In British English you 'route' a groove (rather than 'router' a groove), so that's probably where the extra syllable in Aluminium was obtained from (I assume that the 1LT also applies to syllables, i.e. they can never be created or destroyed, only moved from one word to another)...
Man I really want to make a steering wheel for my 69 mustang and my 68 C10 now. Yours turned out awesome!
There’s a finish for Maple that dates back at least to the Revolution. It was used on LongRifles as well as musical instruments. The traditional name is AquaFortis, the formula is 50% Nitric acid and 50% distilled water used VERY carefully. If you make it always remember AAA, always add acid to water not the reverse. Steel filings or easier steel wool is dissolved into it until it is Neutralized and won’t dissolve anymore. Strain it through cheesecloth to remove iron particles and save in a glass container such as a mason jar. It’s still somewhat caustic but much safer to use. Use rubber gloves though or a cotton dauber on a stick is the traditional way. Make sure to raise the grain several times and knock it back down with finishing paper before applying it fairly evenly. Heat is then applied traditionally with a heated iron bar other methods are usable a well. The smaller the heat source the more control. A sunburst effect is easily achieved. The heat is combined with the sugar in the maple to carmelize it and allowing colors between yellow up through orange red and into brown. It doesn’t darken the grain which is still clearly visible. On rifles it was also combined with silver wire inlay to give nice contrast, I’ve also seen copper wire used. Both the inlay and aqua fortis are fairly inexpensive to learn. The traditional topcoat is boiled linseed oil. Which gives it a wonderful luster With a miles deep effect, it seems to be on fire. It’s also incredibly easy to touch up if damaged and has a Wonderful odor. Just don’t get it from Wal Mart. Tried and Trued wood finish has the real stuff. The curlier the maple the better.
came out pretty good. Another thing I'd suggest is doweling the wood, so it can't fall off. Also the dowels look cool
Great ! 👍 And tools and more tools. It's a relief to know those tools are available to you at any time after you purchased them. Next project , tools and more tools...😂
Another great video, your crew in starship troopers would be proud! Thanks for your comment on the last video! Made my day Super Neil Patrick Harris’s brother!
“Wood shelf”? In some alternate universe there is “SuperfastMatt - Woodworking edition” calling screws “corkscrew thingys”
Nails are "those really heavy duty thumb tacks."
I just discovered your channel. And English being a 2nd language i thought Super British Matt is really a different person in the other video. I was wrong. Anyway thanks for all the commentaries. This channel is the most informative practical automotive engineering i have watched. Thank you SuperfastMatt.
I love my Nardi steering wheels...I've fitted them to several cars over the years.
Don´t worry. Here in Sweden we have about 4 different types of pronouncing the famous word aluminum, only thanks to dialects within the country. Thanks for doing this channel, all the funny comments and....hard....work? ;) Keep it up Matt, doing great!
More tools is always good.
You will NEVER have too many tools. It is a mathematical impossibility.
Wonderfully amusing and informative.
I was missing the Jag videos.
climb routing, finger joints and pattern bits
Man, those tiny Hondas are beautiful. I bet they're super fun to drive too.
I couldn't care less about cars, but here I am watching your videos. You're a great presenter, very entertaining.
Wow, Matt, that steering wheel looks amazing, you are a talented man, I think that’s why I love your channel. All hail the algorithm! 😎
5:15 what a coincidence: just watched this movie (again) last night 😊
Wow - your videos just bring me unbridled hilarious nerdy joy. Thank you :)
To stop blowing apart the wood when routing is to nibble away at the in the direction opposite the router bit, after completing that task you will do a final routing in the same direction of the bit. Works every time. Having a really sharp bit also helps
I had a lot of fun selling all the parts I bought from you except for the convertible top bows, not so much fun, had to ship them. Seems to me the S600 steering wheels are steam bent? Honda wheels were made by Futabaya Racket Co.
I have made 3 wheels for Triumphs. I glued the wood donuts directly to the aluminum. But, the wheels are asymmetric, 13.5” main OD, 11” OD across the bottom. So the idea of octagons, router jigs etc aren’t directly useable. The one in my car is Koa, the other two were quilted maple. They really give excellent leg room across the bottom. Reference the original wheel Nardi used in his racing cars on the EZ steering website.
It’s round! Kudos to you sir!
route against the spinning bit (to avoid self feeding and maintain control) and with the direction of the grain of the wood (to avoid tearout),
it is how you shave your beard, if you go against the direction of the individual hairs you lift them and tear them out (which will happen of the blade is not sharp enough) if you go with the hairs you simply cut theme
Impressive project. I mean next to the Nardi it definitely looks homemade but it's still admirable work. I'd say it's a perfect candidate for a leather wrap.
For the cap maybe 3d printing, molding + epoxy for the actual part
This is such a fantastic channel. Thank you for the honesty and sincerity, it's like a beacon in a bottomless ocean of crap
Well that turned out really nice. I like the 1 inch opposed to a smaller diameter. Very impressive. The new router and table were a good idea for sure.
The steering wheel looks great. If you wanted to retain the original, the wheel ring can be sprayed in the rubber finish material they use on mobile phones, any colour you like. If the centre is aluminium, it can be vapour blasted with glass beads to a mirror shine. If the centre is steel, it can be painted in a chrome basecoat and a candy clearcoat so it looks like a chrome anodised finish, again any color you like to match or contrast the colour of the wheel rim.. A whole lot more choices.
Tip for the gluing, use wet rag to wipe off any that is pushed out and when glue has solified to hard jelly like, it will hold the peaces already but remove it from the clamps and use box cutter to remove any remaining glue so little sanding removes whats left. For sanding you might want to try sanding bow to get more uniformed bend.
Been there, did that fifty years ago at school, metalwork. I cut out the aluminium by hand, that was the hardest part. Used marine plywood on either side and riveted it on with aluminium rivets. It was then mounted on a woodworking lathe to profile the plywood. It came out great with a strip of metal showing around the rim. All in all a much easier way to do it if you have access to a lathe. English schools were good back then!
Oh my! NICE GUITAR, MATT! 😲👌👍
Awesome...Extactly what I am trying to do. Hope I can get at least half the result you got. Thank you for sharing.
Your woodglue shelf is fine, the glue joint will be stronger than the original wood fibers were. Surprising but true.
You NEVER cease to amaze me you glorious barsteward
I appreciate that you have two pairs of glasses. It means you're cool.
1st time viewer and I can't even count how many times you had me laughing out loud. Thanks!
Centercap
3d printed part - with filament swap at layer height.
Do it with abs or asa, vapor smooth it and for finishing touch use clear resin to create uniform outer surface. Or just spray it with clear coat and call it a day. Ez
I scrolled a long way for a 3d printer comment. Useful for so many custom templates and jigs also
@@trahar6257 it's quite funny, right now every car in my family have some kind of 3d printed replacement part. 3d printed wheel center caps are norm XD (much easier printing than looking for oem one or wait for one from China).
Nice job with the bunch of old tools laying around 😁
That came out fantastic!! Super entertaining and informative. Thanks, Matt!
You're absolutely right about Hotpoint. It was originally an iron (clothes flattening appliance) company and they got popular making irons that were hotter at the front, i.e the pointy bit. People knew them as "the irons with the hot point" and there's the name. The guy behind it also had a line of appliances called things like "El Tosto" and "El Perco" and also founded the city of Adelanto. So there you go.
"Half Baked" 🤣😂🤣😂 sounds like a lot of my rc ideas 👍
Another way to prevent tear out is to not take so much off on the first pass. Lower the bit take half off then set to finish depth.
Those other bits are top bearing flush cut bits. They also make bottom bearings too. Depends on how the pattern is set up.
*NEVER SEEN A MAPLE* steering wheel - think it looks AMAZING - love the very pale colour.
Does NOT go in the Honda like - but the wheel is great.
Great job. I like the new steering wheel.
10:31 What kind of craziness is on the Honda's shifter?!!!
The clutch. It has a motorcycle clutch.
Beautiful job Matt!
Automotive ideas got FULLY Baked in this episode 😊
I wish I had 1/16th of your wit.
Re: Color. It's not too late, if you used an oil finish. An oil based wood stain, can get you darker shades from lighter woods.
or he can go back to wrapping with hockey tape :)
I know I'm super late to this party but just an fyi, that little peg thing that comes with your router table is super handy when you have to feed your workpiece with the rotation of the router. you can use it to leverage your work piece against it when initially feeding it in. It also helps when making normal cuts to with no fence.
If you make more you might try Elm wood . It is used for Windsor chair seat's and arm's because handling progressively polish's it .
I love your humor. I especially enjoyed the "hefty" and "wimpy"
Another great video, Matt. Your simple shelf joint looks a great deal like a lap joint, btw.
The guy who discovered Aluminum (a brit) named it thusly, but it was changed to be more inline with the other elements, so both are definitely accepted.
Fun fact: the appliance series that has "HotPoint" calls their refrigerators "ColdPoint"
the "shelves" you made are called "halflaps", very strong joint. - edge bearing bit = flushtrim bit
Hmmm. I have a Hotpoint fridge…🤔
Oh my gosh, cracked me up @ 7:20. That's me on every project ever.
Sarcastic enough. Eyes on the upper right corner.. Perfect. And I need more space in my garage.
Matt, my dad was a petro engineer, and like you, a dyed in the wool contrarian. But past his incredible collection of Texas Aggie jokes (Class of '49) he din't have nearly your sarcastic humor, or really much of a humor at all. Somedays , you really are a "fresh dose", if you know what I mean! Awesome wheel, but not Jag material, dangit! You will do better! The Algorhithym demands it! FR
I love your videos! I hope you are noticed by the algorithm gods enough to get the recognition you deserve so you can get paid doing things you love, all while letting us experience through your pain blood sweat and tears
"I'll probably work on it next week....probably." You sound like me saying I'm going to finish installing and painting all of the wood trim in my entire house.
I love watching mechanical engineers do any woodworking. it's like watching a fawn take it's first steps.
Beautiful steering wheel 👍👍👍, looks good in the Honda.
Roasted Maple? AWESOME!
gotta love that super japanese matt was super sayian.
Nice Wheel!
You need to do a cross over with Rich Rebuilds.
Oh, god no. Matt knows what he's doing and will end up with a safe and reliable vehicle. I wouldn't let Rich Rebuilds within a mile of anything I own. I want to live.
@@awo1fman and on top off that, he has no sense of humour …..
All hail the Aluminium! I like to call your metric guy, Commonwealth Matt as it's more representative of the British Empire. I say that even though I live in the great southern penal colony, which makes us sound like a bunch of dicks but we're not. Oh look, beer!
Not to worry! After you get those nuke subs no one will be looking 'down' on you any longer
Did someone said “beer”?
@@helgaschmiedtmarcelofalcao2246 YES, XXXX Gold!!
@@randyfleet9968 2040 is a long time away.
G'day M8 ;-)
Oh sick I watched your Honda build a while ago and forgot about your channel, got curious about building a steering wheel and found you again. Subscribed so that won’t happen again.