I Put Mickey Thompson ET Street SS 305/35/20 Drag Radials On My Challenger SRT Hellcat 0-60 Times
Вставка
- Опубліковано 7 тра 2019
- 0-60 runs and times with Mickey Thompson drag radials on my Hellcat. B5 Blue 2016 Dodge Challenger SRT Hellcat
instagram - _b5beast - Авто та транспорт
That looked like fun! That's a nice drop in times compared to the stock tires, I think you can improve the times more also.
Daytona 5.7 1.2 seconds better than the stock tire best. The way the 3.7 felt I know I can improve 👍
@@b5beast611 Awesome!
B5 BEAST do you have a before and after for the quarter? That would be great to see!
Cheers mate
@@b5beast611 a aaa aa
Aaa
Minute 4.00 , he has the rotation backwards towards the back of the car. Like so he can see
Great video 3.7 back to back!! With that beast is all about the take off that this just lights those tires .
Mike L The takeoff is a major challenge. I felt pretty good hitting those 3.7’s. Thanks! 👍👍
Nice runs man. What a crazy difference with the 2 tires next to one another. Nice man
Thankyou! 👊 Yeah, the Mickeys are just a little meatier👍
Gotta love that B5 blue
For Sure! 👍
keep up the content man, 1k subs is approaching 🙏🏻
stealthcoyote Thankyou! 🤙🤙
I would be happy with a 3.7sec. That goods.
I was pretty excited. I was giggling a little inside. Haha👍👍
My best is 3.2 on nitto nt05rs
That’s awesome! My Whippled 5.7 R/T pulled a 3.4 on Mickey Thompson Street R’s 17s
Awesome man!👍 Did you do that on the street? I will run 17's when I get it on the track. I'm seriously considering a 17" street setup as well.
B5 BEAST 3.4 was on track, street was 3.6-4.0
@@slowguyrico5819 NICE👍👍 You've got that 5.7 working💪💪
What kind of upgrades you got brother? I'm trying to make my 5.7 run low 4s high 3s. I know LSD and Drag radials are coming first. But after that with the engine mods I'm not sure what else to do other then a supercharger
@@MLProductions.1 well my Whipple setup blew up on me after barely a year because tuning but I would recommend building the motor for sure before adding boost
Mastering the take off is key in these cars. I stil can't figure out a consistent way to get off without spinning. 4.3 is still my best.
Mr. Anderson is Fully Auto I hear you man. I’m going to try launching in 2nd gear next time. Should be a lot less spin.
You need to spin those tires more than that to generate adequate heat dude!!! U gotta get em sticky!!!
LSX KING I going to do another video on this soon. I’ll get them good and hot 👍
Drop your pressures down to 18-20.
Good times!
Thanks man! I like them sub 4's!
Badass car, looks like MT's hook up pretty good too. I'm still planning to do a "badass" vid with the Satellite but I've been having brake problems with it and just got it fixed the other day after sitting on a jack for a couple weeks.
Thanks! 👊 Yeah, I'm pretty happy with them. Yeah man, brakes are a necessity. Look forward to seeing that Satellite in action👍👍
@@b5beast611 Absolutely, I was also putting solid steel engine mounts and a red poly. transmission mount on it while I was on the ground and it's really putting the torque to the tires now. Should be able to do a decent little burnout for you without stopping first LoL
@@Impactjunky Awesome! 💪
Nicely done .
I’m getting 18x10 bravados and a pair of 305/40/18 Mickey Thompson streets for my Charger scatpack
👍👍 That set up will hook up big time. Thanks man!👊
Do you recommend getting a differential brace ? Or do us scat pack owners not have to worry about that as much as the hellcats
@@SK-qg1ln If you decide to start adding hp I would definitely get one.
How did you like that setup ?
That's awesome man. I have yet to get below 4 and not sure if I will without drags. I still have way to much spinning, but it hasn't gotten that warm here yet either.
CTHellcat 👍👍💪💪 Yeah man, you’ll nail sub 4’s with some drag radials easy
That viewpoint will be perfect.
👍 Thanks!
@@b5beast611 I'll be looking forward to seeing the finished video when it's finished. Will you be able to make it about 10 minutes long or longer, the longer the better, about as long as this video would be good.
@@GoPro._Musica For sure! 👍👍
Great times there, I’ve heard people having success starting off in second gear and then popping back into drive, otherwise it’s all about throttle manipulation.
Yeah, it's a touchy game with the throttle. I'm planning on doing some 2nd gear launches when the rain goes away. 1st gear is pretty useless. Thanks man!👍
B5 Beast, Any rubbing issues ? I have stock wheels 20 x 9.5 on my 2020 Challenger 50 Shaker standard body. Getting ready to upgrade my tires. I was going to get the 275/40 until I ran into your video. Also looks like the 35 profile on these particular tiers,barent super low profile. Actual in your side by side comparison they look taller. Which in my opinion is a good thing. I don't like that super low profile look on Challengers. I prefer the more old school look. Also how is the ride ? Do you notice I rides harsher compared to the stock tiers ?
Thx in advance Eric
No rubbing issues and they ride great. The only bad thing about the Mickeys is they aren't safe if you get caught in the rain. These are on a 10.5" wheel. I wouldn't recommend going wider than 275's on a 20x9.5 wheel.
@@b5beast611 Thank you brother
What a difference in tire size the 305 looks a lot better also.
Ouzo Lou Garage Yeah, the drag radial looks a lot better on it. The 1.2 second improvement on the 0-60 time says a lot about the Mickeys 👍👍
When You mix the predator with the beast you get a 3.7💪🏽
Hell Yeah! 👊
I know I'm 2 years late but DA, humidity, and heat can make or break your timing by ALOT. Redeyes do 0-60 in 3.2 seconds with stock tires but with good drag radials using launch control you can get high 2s out of them and the 3.09 gears help pull much better
I have 17" wheels on it now so I have a lot more sidewall to work with. There's different factors in the time as you mentioned also. I think I can get a better 0-60 with the new wheel and tire set up but haven't had the time. I'll definitely be testing them when it warms up next year.
How much hp had in this video?
You have to heat your tires up a little more than that and 25 psi is to much try it around 14-18 psi
Ernest Major Thanks for the advice! 👍
@@b5beast611 no problem get back at me let me know how it works out
Has anyone commented that the tires are on the wrong side lol. Got them spinning the wrong way
Yep. Gotta try not to do that again! LOL
I get consistent 4.1 in track mode just rolling into the throttle with the stock all season pirellis(275)
WOW. That pretty good throttle work!
Lie!
Silly question but when using the black 500hp key can you still light the tires up or do the tires handle 500hp well? Thanks
Matthew Jones Oh yeah. You can still light em up. Just not nearly as violent. Haha 👍
@@b5beast611 thank you
thats much better.
You got that right. Huge difference.
Hey bro you might get a little better times if you rotate those rear tires. The rotation directional is backwards on the passenger side
Zach Ruiz Yeah, I realized that afterwards. I’ll be trying this again when I get a new set. 👍
Is it just me or are those tires on the wrong side? Wrong tread direction...
Lee Dennis Yeah. I definitely wasn’t paying attention and put them on backwards. When I get a permanent set up for this car they will be right. LOL 👌
@@b5beast611 lol... just wanted to make sure I didnt see that wrong.
god dam, need even more stickier tires, still spinning, pretty sure it can get to 3s to 60
Pao Xiong Yeah, all hell breaks loose when you hit the pedal. 👍
@@b5beast611 lol that's why it's called a Hellcat 👍🏼
Tires were installed wrong. Rotation direction is backwards
You're right! Good eye!
24 should be a good psi without doing a decent burnout of the tires. Ha e you tried letting the engine cool down like at a drag strip to get rid of the heat soak?
I haven't tried that yet. I do them one after the other and vacate the area. Haha. People say they can hear me from a mile away at wide open throttle.
3.9 in my stock Charger scatpack on stock wheels
NICE! 👍👍
What was the DA ?, that always makes a difference
@@independent2368 I'm guessing around 1300
I was talking about scat mods comment of doing close to the same time, and the DA makes all the difference in the world. Plus you were spinning, and should be able to do better than that if you were hooking good
Same here. 2020 Charger Daytona 392, stock tires 3.9 sec 0-60
Mate, do a decent skid first to get them sticky. Chirpn those bad boys win gonna do anything. Love from Australia
Slug Worth I’ve got a new set now. I’ll be giving it another try. Thanks!
@@b5beast611 awesome bud. 😎🤙
60 FT
I'll make sure to get that when I do this again.
Did you improved time in drag race ?
I haven't got it on the track yet. I plan to though.
Concerned about how the tires are not wearing evenly???
I borrowed therm from another car for this test. I bought new ones after this for the Hellcat. 👍👍
3.7 is good ... have you tried the launch control ?
Violent HEMI Not yet. I plan on doing a launch control video though.
What is your normal street driving psi with those tires?
32-34 psi
B5 BEAST awesome! Just bought these for my ‘16 hellcat.
@@MrCorgitalks You're really going to like them👍👍
So what every day pressures u run on the 305s
Warren Waymack 32-34 psi
@@b5beast611 thanks 4 reply i also switched from 9.5 stock ATWA to 10.5 9.5 awesome cat, mine sp
@@warrenwaymack7366 Awesome! Thanks man!
What size are your wheels?
20x10.5
Are those the stock 9.5 rims
Replica 9.5 in front and 10.5 in the back.
Nice! GBR! I just picked up a 17’ T/A 392. Thinking about getting some 305s but wasn’t sure if they fit on a 9.5” wide wheel. They look like they fit fine! Hope to see ya around Lincoln.
I have 10.5" wheels in this video. I wouldn't recommend putting 305's on a 9.5" wheel unless they are 17x9.5.
@@b5beast611 they are the 20x 9.5”.. so maybe? lol
Stock rear rims?
Ethanol Hound I have 10.5” replicas in back and 9.5” in front.
Did they spin??
DevilSRT They did. I think they will always spin unless I’m on a prepped track.
What size rim is that is it a 9.5 what width size
CLIMON 392 10.5” Hellcat Replicas
B5 BEAST I have these exact rims from factory but they’re 9.5 where did you happen to find the 10.5 reps
CLIMON 392 I found them on eBay
I see there’s different offsets what offset did you go with to not have any rubbing
CLIMON 392 Yeah, I forgot about that. I went with the +25
Pretty sure you're rotation is backwards lol
LOL. It is. Didn't realize it until after I posted the video.
I use the same pressure gauge lmao. That Lowe’s special
Jordan Wilson Lol. Got mine at Oriellys. 👍👍
Why does it say predator?
Brad Bohen I took the wheel and tire combo off my Daytona to see how I liked the setup on the Hellcat 👍👍
@@b5beast611 I'm confused as to you glued letters on or what? My tires don't say predator.
Brad Bohen Yes. They are tire stickers that I put on. They were on my Daytona which I call PREDATOR
Damn trim your video lolol