Badger Workshop Tour 2023
Вставка
- Опубліковано 1 жов 2024
- It has been a busy year for me. Last time I did this I was in a tent. Now I have a workshop, a shed and a third workspace.
Tools I use
www.badgerwork...
As an Amazon Associate I earn from qualifying purchases
Support me on Patreon
/ badgerworkshop
Support me with PayPal
paypal.me/badgerworkshop
My Cookery Channel
@KitchenRamblings-in5py
🎧 WORKSHOP BANTER PODCAST 🎧
/ workshopbanter
Also available on Spotify, Apple, Google and most other podcast platforms
Social Media
/ badgerworkshop
/ badgerworkshop
www.badgerworks...
My cooking channel
...
Music from Uppbeat (free for Creators!):
uppbeat.io/t/s...
My Cookery Channel
@KitchenRamblings-in5py
Thanks Matt! I love your cozy workspace. I have enjoyed your Kitchen Ramblings as well! May 2024 be a happy year with continued growth.
Thank you very much
I really enjoy your videos Mr B. Regarding your (now side mounted) air filter: My workshop is approximately twice the size of yours - do you think the one you have would be sufficient? What’s the model? Too blurred to see. Thanks again.
It’s made by record power. It should have the specs of what size space it can handle
Didn't you previously have an Axminster table saw? Did you change because you were dissatisfied with it?
Almost at 50k mate! Merry Christmas and a happy new year. Cheers.
Enjoyed your tour thank you. Happy New Year. Just one project idea for ‘24 fit a workshop bench vice and bench retractable plane stop. Have fun.
I see you are not using the plastic bucket cyclone Badger, any reasons why? I was looking at building the same version of cyclone but if any problems whilst in use I may look at another option. Your advice would be much appreciated. To be a little cheeky, any stickers available to send. Cheers and have a great 2024. Mick
😊 matt how effective is your Record air filter when using power tools.What set up is your extractor for bench saw etc. Regards Doug.
Why does everyone make these complicated clamp holders? I just have a few (say 25x45mm) battens screwed to the workshop wall and clamp the clamps as guess what, clamps! Even the parallel jaw stuff like my Bessy clamps have a back shoulder that allows them to be clamped to the batten securely.
It is at least, or more efficient, a method of stowing all of your clamps, I've yet to have one become detached from the batten and it works for all of them including my old cast iron sash cramps.
I’ve seen you keep going back to your mixed woodpile can you tell us where you can get them from ?
This prompted me to go back and watch all your other tours from previous years, beats rubbish Xmas repeats on the TV, I'm new to your channel I didn't know you were near Peterborough as am I 👍
Thank you for this. I’m about to embark on building my first ever workshop so have watched the builds you have done for inspiration and seeing this tour has given me food for thought. Fairly new having come over from Kieth and your joint podcast. In true lazy internet person is there a video for that Christmas tree build. Couldn’t see it well enough to be certain of some detail. I will try to look for it but a link would be great 😊
You should to the Badger tour of Mr Matt so we can get to know you a bit better….
great to see your setup, 2023 was a busy year!
Some great work last year.
Looking forward to another fun packed year Matt all the very best for 2024
Thank you
Great tour, I’m about to move house and will have roughly the same size workshop as you have. Also where did you get the name Badger Workshop from?
Thank you. Badgers are my favourite animal
Matt what a great space you got and I love the cooking channel as well you have given me so many different idea and way to use my work space so a big thank you to that I watch a lot of people on UA-cam about woodwork but you my friend are up there in the top 5 that I enjoy watching and one I would enjoy working with if ever had a opportunity to do so I hope you have had a great Christmas and I wish you a happy new year I look forward to seeing what you do in 2024
Thank you. Happy new year
Thanks for the tour, Matt! 😊
I just subscribed to the other ch!!!
Happy new year! And stay safe there with your family! 🖖😊
Thank you
Thank you!
Like your workshop and storage shows, you can in small space..... plus a kitchen show lol I'm not a big fan of cooking shows, but I'll give it a look. Thanks for 2023. aww the best for 2024 😁👍🏴
Merry Christmas and a happy New Year.!! I always look forward to your videos, please keep them coming. Good luck with your new Lucullian adventure!
Looking good Matt. One thing I've got for my shop it's bit bigger than yours but its an industrial unit and freezing with no insulation a got electric space heater off eBay 3kw was 40 quid and it heats whole shop very quickly could be better than desiel heater. 👍🏴
Sounds a good heater
@@Badgerworkshop kept me from freezing that's for sure. 👍🏴
Hey Matt, I'm hoping to build a similar sized workshop/shed soon and must have watched your build videos a dozen times for inspiration. Have you had any problems with condensation in there through the winter?
Hj Matt, that was a great workshop tour, I remember when you built your first shop, you just seem to go from strength to strength, and now you have the second channel, congratulations on the great effort this year, I would like to wish you and your family AVery Happy New Year, best regards from a Kiwi living in Australia, Les
Thanks for this Matt, great to get an update on your year ! I' impressed how you adapt and adjust to your changing circumstances whilst turning out reliably interesting content !
Thanks for all you've posted during 2023 !
How is your power cube with the startup surge?
Handles it fine
Great to see how things have progressed Matt, wishing you all the best for the New Year and can’t wait to see what 2024 brings with you!
A great 2023, here's to 2024. All the best.
Thank you. Happy New year
The workshop looks great, Matt, but I love seeing the junk too cos it makes me feel right at home 😊
For an insulated shed that size, you might want to research heating units that are either greenhouse or caravan style
Have a very Happy New Year Matt.
Happy new year
I've really enjoyed following along on your builds Matt. You've definitely been busy but at least it's kept you out of mischief. 🤣
Looking forward to all the new videos on both of your channels in 2024
Thank you very much
Great year for you. Looking forward to your exploits in 2024. HYN to you!
Happy new year
Hi Matt, you do have a great workshop every thing to hand and mobile and plenty of storage as well as a storage shed, you have got a good set up. I hope you had a nice Christmas and I wish you the best for 2024, Take care👍
Thank you. Happy new year.
Hi Matt, Best wishes for all your projects in 2024.
Thank you
Wow! You made a giant leap from the tent setup with your kitchen as storage area for most equipment to these fine workspaces. Thank you for another year of inspiration. Always looking forward to your videos and podcast! Best wishes for 2024.
Thank you
Seasons Blessings to you & yours Matt. Thanks for all you do here. Take care & stay safe.
Thank you. Happy new year
Happy New year, both channels are great
Thank you.
You appear to be running out of ideas. A workshop tour? Really?
Pretty standard fare for such channels. Everyone likes to see other people's spaces
You appear to be running out of charisma. A comment like that? Really?