Audi C7 A6 Stock v. Stage 1 vs Stage 2 W/ Single pulley Install - Dyno
Вставка
- Опубліковано 24 тра 2021
- How's it going, guys?
Today we had @raudia6 's beautiful 2013 Audi C7 A6 in the shop today for a Dyno Day!
We put this car through the paces starting out with a stock pull to get the base numbers, moving on to our Stage 1 Tune, and then installing an upgraded pulley to document our Stage 2 Tune!
Stay tuned until the end of the video to see a draggy run with BDT's Stage 1 Tune!
Let us know what you think down below!
Until next time, #StayTUNED
Software Information:
C7 A6 Stage 1 Software - boostdynamictuning.com/2012-2...
C7 A6 Stage 2 Software - boostdynamictuning.com/2012-2...
TCU Software - boostdynamictuning.com/2010-2...
___________________________________________________________
🏁Check Us Out!🏎💨
🚨 Website: boostdynamictuning.com/
🚨 Facebook: / boostdynamictuning
🚨 Facebook Group: / boostdynamic
🚨 Instagram: @BoostDynamicTuning
____________________________________________________________ - Авто та транспорт
This is the exact type of video I was looking for. No fluff, just what is on the car and dynos.
Facts!
Stage 1 is the sweet spot
400whp is nuts
Yeah I personally got mine at stage 1 and I still pull a lot of power, enough to have some fun.
This car is such a sleeper I’m looking for one 😮💨
Great video straight-to-the-point thank you👍
Impressive! I’m 034 dual pulley e40 on my C7 A6, but those are goood numbers 👍👍
I’m glad I found you guys
I'm glad we can connect with new members! This video is okd and we have a ton more revisions after that dyno run :)
@@boostdynamictuning soon I’m going to try out your tune on my 2014 A6
@@geramane5184 glad to read! Hopefully post up some after math videos!
Where did Mitch get his grille?! Been looking for a the black one with the chrome Audi emblem
Wily indicações? I love it
What ECU tuning software were you guys using?
What happened to torque on stage one ?
Air Intake? exhaust work?
Besides a smaller pulley and stg 2 tune, does this car have upgraded hx, exhaust, spark plugs?
None of those modifications were performed sadly
Hey man im looking to get stage 1 tune with boost dynamic! ECU TCU. Does the single pulley work with the stage 1 tune file or do I need to upgrade to stage 2 and get a heat exchanger? It’s for my 2013 A6 3.0t Also do you sell that pulley on your website or do I need to get one from a different tuner?
How's it going? Being dual pulley you'll want to go with my stage 2 tune. I do sell CTS 187/57 pullies on my website. I believe I have a package deal as well. Let me know if you have any other questions.
@@boostdynamictuning I was hoping to do just stage 1 and feel it out. What do you recommend for stage 1+? I already have exhausted modification and CTS cold air intake but with stock cats. Am just looking for maximum power gain with stage 1. It will all be order from your website. Also need some pops and bang lool
@@Konah we can make it happen, I personally say stage 1 is the best bang for the buck, but Tcu tune required
@@boostdynamictuningamazing! Also I know most tuners have different lunch control settings, does your tune have those options as well? Also last question, I see you have option for pops and bangs, would that be safe with my stock cats at medium level?
Such a great motor that's detuned from factory.
I have the same car with stage 1 and thinking of installing upper pulley also but the increase in hp is only aprox 5hp?? I thought the gains were much higher.
This is my car! We believe that the car won’t adapt to the pulley/new tune on the dyno, so we got accurate tq numbers from the ground on the coil, but it should definitely make more like 420-430 hp.
What Mitch said is correct, the car couldn't properly adapt on the dyno. If you take a look at our single pulley upgrade video for the s4, those are more accurate gains. Only because the car had the time to adapt.
Link to video:
ua-cam.com/video/4sKBEk92BwU/v-deo.html
I recently got an a6 how would I go about getting a stage 1 tune from you is there a way to remote tune since I'm in texas
Yes, I can send yoy ca cable and flash remotely. Just need windows laptop and wifi
@@boostdynamictuning is there a link to where I can order it from or how does getting it work. I have a 2012 audi a6 with 77000 miles
@@boostdynamictuning also do I have to put just car in service mode and take off the whole bumper to install the new pulley or would I be able to do it without most videos I see are for the s4
@@torqueypunisher5743 boostdynamictuning.com/2009-2018-audi-a6-stage-1-supercharged-engine-remote-tune/
Promocode BOOSTLOVE
@@torqueypunisher5743 ua-cam.com/video/sqKXhub7-JM/v-deo.html
s4 and a6 are the same. This video is the quickest way to install a single pulley. No front bumper removal.
Hi I'm interested in the remote tuning how does that works?
Morning! Here is a link to the product. boostdynamictuning.com/2009-2018-audi-a6-stage-1-supercharged-engine-remote-tune/
As soon as you place an order, I ship a cable to you. Here's a video of the next steps, for flashing my tune :)
ua-cam.com/video/ZIc_bLmJBf4/v-deo.html
How much does something like this cost? I would love to do this to mine
Check our website out at boostdynamictuning.com 😎 promo code BOOSTLOVE takes $100 off
Was the car 100% stock before the tune? kinda hard to believe 100 horsepower gain from a tune alone
around 100 is perfectly normal for this engine on stage 1
@@TehsheeeepI second this
Yes, it was 100% stock. A performance tune is the best power gain per dollar.
have any specials going for an A6? 2013 3.0 T?
Hmm, pm me. Let's see what we can work out.
Not much difference from stage 1 or 2? Wasn't worth upgrading the pulley???
It's more tq gain really
I want my s4 tune by you
Let me know! I can take care of you!
Was this done on a stock ecu
Yes the oem ecu. Flashed with our tune.
Good by warranty
I can keep warranty actually
@@boostdynamictuning please elaborate. Typically with a TD1 flag your warranty is voided.
@mhaas281 taking a bench read with zero flash counters set. Then, loading the tune. If you need warranty work. flashing it to stock, they will never see a flash.
Why don’t they like rain and humidity
Air density is bad with humidity.
The sc cars seem to really lose hp on humid days
Are those numbers to the wheels or to the crank ?
To the wheels