Thanks man! I used this to charge my son's batteries for his arrma. I bought this same charger, and got the 2 pack of Hoovo batteries (same spec as yours) and they work great!
Thank 🎉you I’m an old dude . Needed this . Upgraded my Arrma 1/8th mega to brushless bought the limited edition copper head Castle also a speed remote but scary charging very cool thanks . Learned a lot. 😅
Hey man thanks for making this video, i just bought Zeee 4S Lipo Battery 5200mAh 14.8V 120C Hard Case for the first time. Can I use the same charger with 5.2 Amps setting for 4S.
Can i charge that same zeee battery on a non balance charger with out using that safety battery bag because wanna give my kids some rc cars the rc cars will be running those batterys will it be safe battery charger i have takes 5 to 6 hours to charge a lipo battery from flat to full
I would error on the side of caution, especially when it come to lipo batteries. Use a quality charger, follow the directions and use a safety charging bag. cheers!
Hello, can this charger still be recommended? My son got an RC model for Christmas and I need to look for a good and inexpensive charger. Will this purchase be a good one or should I look for something else?
It’s important to match the correct type of connector on the battery to match type of charger port you have… they make different types / configurations of batteries.
Hey man I'm looking into getting these battery's for my trx 4 blazer and I was wondering what connector you used to be able to run these battery's. Thanks again
I ordered my zeee batteries with the Deans connectors then I got some Deans to Traxxas adapters... they kind of suck but I didn't really want to chop my factory wires and void my warranty. Cheers.
@@crazyartistic Right on. FYI I've had a few issues with the adapters making a good connection but that was on my MAXX doing some jumps. To fix it I just tweaked the copper parts so the plug stayed snug and its been all good after that. Cheers.
The HTRC B6 v2 charger is limited on the Cell size / Number. That is what the "2s" means in my video 2 cells. The charger is capable of charging up to 6 cells. The mAh size of your batter shouldn't be an issue, it will just take a bit long to charge.
How many amps are you charging yours at cause i just got some new 5200 sokokin lipo batterys and i got a slash running on a 175 justock brushless combo and im not getting any punch or speed and its still a brand new brushless and batterys idk why i dont have any power??
@@Elveshelves well mine is the same charger I'm running on 1 to 2 amps maybe I should put mine on 6 amps cause my battery's are 80 cell but the justock speed controller is brand new idk.
Thanks man! I had absolutely no idea how to use this charger until I watched this video.
@@homquist have fun and stay safe!
I have been using Zeee batteries for over 2 years now they work just fine for any type of driving !!!
I like mine. Cheers!
Thanks man! I used this to charge my son's batteries for his arrma. I bought this same charger, and got the 2 pack of Hoovo batteries (same spec as yours) and they work great!
That is awesome!
Great batteries, I get 30 mins run times minimum, I bought 2 tht were 5200 mah 50 c and they send me 4 5200 mah 80 c
nice. I'm happy with mine.
Thank 🎉you I’m an old dude . Needed this . Upgraded my Arrma 1/8th mega to brushless bought the limited edition copper head Castle also a speed remote but scary charging very cool thanks . Learned a lot. 😅
No Problem. Have fun!
Hey man thanks for making this video, i just bought Zeee 4S Lipo Battery 5200mAh 14.8V 120C Hard Case for the first time. Can I use the same charger with 5.2 Amps setting for 4S.
Thanks! Went with this charger and 4 of the Zeee 6200 packs. Also a GoPro mount for the top of his car.
Awesome!
Can i charge that same zeee battery on a non balance charger with out using that safety battery bag because wanna give my kids some rc cars the rc cars will be running those batterys will it be safe battery charger i have takes 5 to 6 hours to charge a lipo battery from flat to full
I would error on the side of caution, especially when it come to lipo batteries. Use a quality charger, follow the directions and use a safety charging bag. cheers!
Just got this charger! Do you still use yours? If yes, hows it holding up? (You got a new Sub by the way👍🏾)
I got two on this new i charged them up and they wont work
contact zee and let them know... they should help you out. I got one battery replaced due to being out of balance. good luck.
@@Elveshelves thanks bro I'm going to do you know if they have to be at 4.2 to be full charged
@@nandoscustomdiecast368 I can remember off the top of my head, sorry.
@@Elveshelves No worries bro thanks for the reply 🙏
Hello, can this charger still be recommended? My son got an RC model for Christmas and I need to look for a good and inexpensive charger.
Will this purchase be a good one or should I look for something else?
Hi how long does the battery last for from fully charged to going flat when running it
I have the blue thing on my battery and it won’t go in with the charger what do I do
It’s important to match the correct type of connector on the battery to match type of charger port you have… they make different types / configurations of batteries.
If it's the blue ec3 connector they are REALLY snug and have to firmly plug in.
I have a 4s 5000 so.... 5.0A for charge. for storage A?
Will it remind me to unplug it ? I need sleep . Not suppose to leave unattended 😅
It beeps when its done.
Hey man I'm looking into getting these battery's for my trx 4 blazer and I was wondering what connector you used to be able to run these battery's. Thanks again
I ordered my zeee batteries with the Deans connectors then I got some Deans to Traxxas adapters... they kind of suck but I didn't really want to chop my factory wires and void my warranty. Cheers.
@@Elveshelves oh ok thanks again man I appreciate the help. Definitely gave you a sub 💯
@@crazyartistic Right on. FYI I've had a few issues with the adapters making a good connection but that was on my MAXX doing some jumps. To fix it I just tweaked the copper parts so the plug stayed snug and its been all good after that. Cheers.
@@Elveshelves nice ok I'll make sure I get good connections and if not I will try that out as well thanks again!
Hi I have the 9000mah zee lipo will that charger work for it as well or do I need a different one please help
The HTRC B6 v2 charger is limited on the Cell size / Number. That is what the "2s" means in my video 2 cells. The charger is capable of charging up to 6 cells. The mAh size of your batter shouldn't be an issue, it will just take a bit long to charge.
Ok thanks for the feed back
Hey boss can you show how to charge the 5200mAh battery on tenergy?
How many amps are you charging yours at cause i just got some new 5200 sokokin lipo batterys and i got a slash running on a 175 justock brushless combo and im not getting any punch or speed and its still a brand new brushless and batterys idk why i dont have any power??
I have a 6 amp charger. U might be in a "training" mode. I'd check to see if ur ESC is the kind with different settings. Cheers!
@@Elveshelves well mine is the same charger I'm running on 1 to 2 amps maybe I should put mine on 6 amps cause my battery's are 80 cell but the justock speed controller is brand new idk.
@@GearWorksRc A safe setting for a 5200 mAh battery is 5.2 amps. Take some time to read the owners manual. There is good info in there. Cheers.
Just plugged in a couple of these how long do they take to charge ?
Charge time would prolly vary depending on the chargers amperage...
@@Elveshelves 4 amps, charge time was around 55mins ish.. batteries lasted nearly 3 hours each so I’m thrilled! I’ll be ordering more for sure.
@@swashbuckler5539 Nice!!!
Meaning I bought the same charger cause the one that came with it started to age me lol