I agree, this is 1000x better than the stupid manual!!! I was getting so frustrated until I found this video so thank you bro I really appreciate you sharing your knowledge 👍🏻
This was super helpful! I suck at reading instructions and this step by step tutorial cleared up any confusion I had to charging my lipo batteries. Thank you sir
Thank you very much for the very informative and excellent instructions on how to use this battery charger. The manual is absolutely confusing 😕. Once again, thank you for taking the time to do this excellent video
Good video. I am building an RC battleship and I have the exact batteries you have w/ the same charger. I am at the part of installing motors and servos and want to use the battery off and on to test functionality and such. My question is, would it be best to do the "storage charge" function so that I can mess around with testing while keeping up the integrity of the battery? Lastly, how long will the battery last in "storage charge"? If fully "storage charged", A week, month or more? Thanks
Yes you can keep it at storage charge which is about 40% charged. Just be sure to check it every now and then while using it so that you don't drain it below it's charging threshold which I belive is 3.2v i never personally let mine get below 3.4 ever. They will last on the shelf not being used at storage charge for about 2 months before you need to re check the storage charge levels.
Thank you so much.. I have several of these batteries. What I really need is a discharge video I'm having a hard time with the settings.. if you would I would appreciate. Do you have a battery u can use. When I goto the screen I'm looking for the 5.0A but it only goes to 2.0A. What does the cycles mean? I'm wanting to discharge my battery as low as I can go then charge them back. How would u do this. Thanks. I understand the charging part ok it's the discharge I'm having trouble with. Thanks again
Very nice video!! I just got mine! And I have a 3s zeee lipo battery connected and the voltage is a 11.1v and when I charge it the display is showing 12.13v should I be concerned or I’m I doing something wrong? Thanks
hey josh! this was really helpful. I still have a problem I think you know the answer to. I just got the fms fcx18 k10. what adapter do I need to buy for the little plug. the big plug fits in the balance part just fine but I need your help please if you have time. thanks!! John H.
You just need an adapter from your molex connector to the deans on the charger so would be I believe a male molex to female deans adapter. You might have to double check that though.
Does the charger shut off on its own when the battery is fully charged. Bought my son a RC car for Christmas with this charger. Car is nothing special just a cheap o. If he stays interested then we’ll upgrade to the higher priced stuff. That being said I have li-Po and li-ion batteries 1600 and 2000mah. Don’t want to blow anything up. Have the setting on 2.0a 7.4v 2s when charging the li-ion but seems like the charger pushes past the 7.4v when charging. Is it supposed to shut down automatically when fully charged. Thanks in advance
What does the 38.48wh mean? Also how long does a balance charge take? I know it could vary depending on how dead it is but just in general how long? Thanks bud.
Not sure about the 38.48wh haven't seen that on my charger settings. As far as balance charge depends on how large the lips and how many MAH it is typically my 4s 6000mah lipos take about 2hrs from drained or about 1 hour from storage charge level. I recommend always storage charging when not using for a while and always balance charge or at least every 3 charges.
What is the capacity cutoff for? Any reason to change it if I’m only running 6200 mAh batteries? Also, any reason to reduce the safety time from the default 240 minutes? Is that how much it charges AFTER the battery is fully balanced charged?
Cutoff is so the battery doesn't drain below it's threshold if it goes below 3.4v the lipo will be trash! The safety time should be how long the charger will run before it auto shuts off.
@@austinprickett7443 no I had to remove one of the other connections with thick wiring that I wasn't going to use and solder on an ec5 connector myself.
Mine didn’t come with the ec5 connector, only ec3. Do you NEED to plug the discharge connection coming from the battery pack to the charger to charge ? Thought that was just for discharging a pack..
Mine did not come with an ec5 either I had to solder it on myself Also yes you always have to connect the 2345 or 6 pen connector as that monitors each cell in your LiPo battery it is for balance charging or charging in general so it can make sure that your cells are even
I have the 2s LiPo at 7.4volts but on the charger it comes up like 8.2v. Capacity cut off is 8000 mah but my bat is only a 5200 dose that also matter or do I have to change something .
So when you charge your 2s lipo make sure 2S which should show 7.4v is selected then make sure you A is set to 5.2A which is 5200mah for every 1000mah it's equivalent to 1A.
I set the mAh and V correctly, but when I am charging my lipo Zeee battery, I notice that the V reading is exceeding the 7.4V that I set it to. When I check the status though, it is still less than 100% charged. Is it ok that while charging the V exceeds the 7.4 I set it to, and can I just leave it charging until it auto stops?
Yes it should be higher the battery is 7.4v but it has to use higher V to charge the battery faster. Mine typically runs between 7.5-8.0v while charging when it's done it should sit around 7.4v maybe a little higher or a little lower but should be by much. Same as when your alternator in your car in running to charge your battery it will run at around 14v but your car battery is only 12-12.5v it has to put out more cureent than the battery holds to charge it. You should be fine. Both Your cells should be right about 4.2 when charged so make sure your balance charging every time you charge so your cells match up or within 10 thousands of each other. Mine usually sit at 4190 and 4200mv on the lipo cells.
Those are ec5 connectors I soldered on so it would charge. You can buy an adapter so you don't have to do any modification. You could get a (female deans) to (male whatever you have) example.. If I have a battery with a ec5.. I would get a female deans to male ec5 adapter. So one end plugs into the deans on the charger and the other end plugs into your female plug on your battery type.
Thanks , i set up as lipo , 4.6, once i press to start charging says batt check beeps and says lower cell volt but cant seem no options after that any help appreciated
Super easy to do...press the + button until you see Nimh press play button. It will say charge on the screen. when you see the. A on the screen with a number in front flashing, press the + or - button again until you have that set to 5.0A that's your mah. Then press play again and then hold play button down to start charging. I will try to do a video and post it later today also. So keep an eye out for it!! Please follow me if you haven't so you'll see the video when I post it. Thanks!
@@elidobbs5876 not sure what your asking. There isn't a specific 3s plug you just need to make sure your plug matches one of the plug types on the charger!
@@jdrcchanneltexas5497 I just bought brand new 3s batteries like the ones shown in video but the 10-1 charger doesn’t allow the plug to fit into the charging hole
Are you referring to a liHv battery? If so I'm not sure as I don't run those. I'm not sure if there is 4.35v lipo battery's as I've always ran the standard lipo in all my rc's. You might have to look up the manual and see if it has the settings for that function. Sorry I couldn't help.
Yes if you have set it to the correct battery amp and cell it will stop when it reaches that amp. So a 4s lipo that is 6000mah will be set to 6.0amp and will stop when it's fully charged.
I mean if you set the settings right technically yes. I wouldn't recommend it. Depending on what your charging. If your wanting to charge 2 seperate lipos faster I would just get the dual charger version. If your meaning an already set up parallel set of batteries I'm not sure on that would depend on what the voltage and amperage mah would all be.
If you have it all set up correctly it will beep and say done. If you don't hear the beeping just look at it every 10-15 minutes and it should show done or full.
If that's what your referring to... This charger doesn't come with an xt90 only an Xt60. So you'd either need an adapter or need to unsolder or take off the Xt60 and solder an xt90 onto those wires. I actually took off one of the plugs I wasn't using and soldered a Ec5 connector on and converted all my cars and lipos to ec5 so I could charge them all the same connection. And interchange them in different cars
If your talking about a completely dead lipo battery most of the time you cant bring them back. They are trash at that point. Never let them get too low or they will be useless. You can somtimes set the charger to nimh and charge it for about 10 minutes to bring it back up high enough that the charger will recognize it's a lipo again and then you can start the lipo balance charge selection again. But be careful!! (I don't advise doing this if your not familiar with lipo batteries)
They sell adapters from one type of plug to the other on amazon so you can go from the deans to ec5. Search male deans to male ec5 adapter. If that's what your needing. That's should work I purchased actual ec5 male and female ends and cut off the banana plug and soldered the ec5 on those wires. But the adapters are an easy solution
JESUS! Why must this be so darn difficult?? My son has no clue how to charge his RC since I got him one of these machines, so he's depending on me to do it, but the more I read the manual and watch these videos, the more I become confused.. what happened to just Plug it and Forget it??? 😠 😡
@@kraziezombie yeah unfortunately with the new lipo batteries they put out more power so they are a little more difficult to charge. Once you understand how they work and how to charge them it's a piece of cake. These types of RCs and batteries are not really for beginner's that don't have any experience with them. Some of my RCs do 100mph
Plug and forget it is when you're using basic NiMH where you can discharge it as much as you want or charge it to its full unbalanced cell capacity. With lipo batteries you're basically stacking phone batteries which is why it's slightly hurt more advanced to recharge it. Just like a phone. This is just like any 4 button charger and if you only have the same batteries you don't even need to change any settings. Just set it up once and leave it be.
This is 1000 x easier than the manual. Thanks for clearly explaining it 👍
Thanks bro I was stressing out until I seen your video
I agree, this is 1000x better than the stupid manual!!! I was getting so frustrated until I found this video so thank you bro I really appreciate you sharing your knowledge 👍🏻
No problem! Glad it helped!
Thank you. I'm new to the RC world and LiPo batteries so I appreciate the video.
This was super helpful! I suck at reading instructions and this step by step tutorial cleared up any confusion I had to charging my lipo batteries. Thank you sir
Thank you very much for the very informative and excellent instructions on how to use this battery charger. The manual is absolutely confusing 😕. Once again, thank you for taking the time to do this excellent video
My pleasure. Glad it could help!
Just got this same charger today. Thanks for the full explanation 👍🏽
Your videos saved me! Subscribed
Thank you for sharing this. I just got this same charger and a 3 S battery. I am new to this hobby and need to learn many things. 🙏🏼🤙🏽
This video is exactly what I was looking for. Thanks!!
Thank you, of all the videos I've sent on this, this is the first that I could make any sence of, thank you!
No problem! Thanks
Really helpful, thank you....even though I'm not a "guy," I appreciate your well-done tutorial. Thanks!
Thanks! Hey girls can drive rc's too sometimes better than guys 😂😂
Lol lost the manual. This was a massive save. Thanks!
Really helpful, very thorough thnx
Thanks, I was unsure if I need to manually change the voltage down for storage
Good video. I am building an RC battleship and I have the exact batteries you have w/ the same charger. I am at the part of installing motors and servos and want to use the battery off and on to test functionality and such. My question is, would it be best to do the "storage charge" function so that I can mess around with testing while keeping up the integrity of the battery? Lastly, how long will the battery last in "storage charge"? If fully "storage charged", A week, month or more? Thanks
Yes you can keep it at storage charge which is about 40% charged. Just be sure to check it every now and then while using it so that you don't drain it below it's charging threshold which I belive is 3.2v i never personally let mine get below 3.4 ever. They will last on the shelf not being used at storage charge for about 2 months before you need to re check the storage charge levels.
The manual with the battery and charger were zero help but this cleared the air really good
Thank you so much.. I have several of these batteries. What I really need is a discharge video I'm having a hard time with the settings.. if you would I would appreciate. Do you have a battery u can use. When I goto the screen I'm looking for the 5.0A but it only goes to 2.0A. What does the cycles mean? I'm wanting to discharge my battery as low as I can go then charge them back. How would u do this. Thanks. I understand the charging part ok it's the discharge I'm having trouble with. Thanks again
THANKS DUDE!
Very nice video!! I just got mine! And I have a 3s zeee lipo battery connected and the voltage is a 11.1v and when I charge it the display is showing 12.13v should I be concerned or I’m I doing something wrong? Thanks
hey josh! this was really helpful. I still have a problem I think you know the answer to. I just got the fms fcx18 k10. what adapter do I need to buy for the little plug. the big plug fits in the balance part just fine but I need your help please if you have time. thanks!! John H.
You just need an adapter from your molex connector to the deans on the charger so would be I believe a male molex to female deans adapter. You might have to double check that though.
Thanks man!! @@jdrcchanneltexas5497
I have a 2S 4800mah LiIon. How do i find out the right balance charge?. Is there anything that i need to be more aware of when using Liion? Cheers
Thanks this helped
Thanks, good tutorial 👍
Does the charger shut off on its own when the battery is fully charged. Bought my son a RC car for Christmas with this charger. Car is nothing special just a cheap o. If he stays interested then we’ll upgrade to the higher priced stuff. That being said I have li-Po and li-ion batteries 1600 and 2000mah. Don’t want to blow anything up. Have the setting on 2.0a 7.4v 2s when charging the li-ion but seems like the charger pushes past the 7.4v when charging. Is it supposed to shut down automatically when fully charged. Thanks in advance
Yes it's normal for it to charge above 7.4 while charging. It will stop on its own when it's fully charged.
Is it better than Gens ace IMARS III Pro Balance Charger ??
What does the 38.48wh mean? Also how long does a balance charge take? I know it could vary depending on how dead it is but just in general how long? Thanks bud.
Not sure about the 38.48wh haven't seen that on my charger settings. As far as balance charge depends on how large the lips and how many MAH it is typically my 4s 6000mah lipos take about 2hrs from drained or about 1 hour from storage charge level. I recommend always storage charging when not using for a while and always balance charge or at least every 3 charges.
@@jdrcchanneltexas5497 Can Lipo batteries be fast charged safely with this charger?
Super helpful man thanks
Super! Thanks!!
What is the capacity cutoff for? Any reason to change it if I’m only running 6200 mAh batteries?
Also, any reason to reduce the safety time from the default 240 minutes? Is that how much it charges AFTER the battery is fully balanced charged?
Cutoff is so the battery doesn't drain below it's threshold if it goes below 3.4v the lipo will be trash! The safety time should be how long the charger will run before it auto shuts off.
Did yours come with thr EC5 connector? Mine only has the EC3
@@austinprickett7443 no I had to remove one of the other connections with thick wiring that I wasn't going to use and solder on an ec5 connector myself.
@jdrcchanneltexas5497 okay thanks I was confused for a minute. I just ordered an EC3 TO EC5 adapter
Yeah how do you use the external temperature sensor settings
I've never used that feature. Not sure if this model has that. If so it might require additional parts to be purchased
Mine didn’t come with the ec5 connector, only ec3.
Do you NEED to plug the discharge connection coming from the battery pack to the charger to charge ? Thought that was just for discharging a pack..
Mine did not come with an ec5 either I had to solder it on myself Also yes you always have to connect the 2345 or 6 pen connector as that monitors each cell in your LiPo battery it is for balance charging or charging in general so it can make sure that your cells are even
@@jdrcchanneltexas5497 👍
I have the 2s LiPo at 7.4volts but on the charger it comes up like 8.2v. Capacity cut off is 8000 mah but my bat is only a 5200 dose that also matter or do I have to change something .
So when you charge your 2s lipo make sure 2S which should show 7.4v is selected then make sure you A is set to 5.2A which is 5200mah for every 1000mah it's equivalent to 1A.
It doesn’t come with an EC5 connector, can you use the negative and positive clamps it comes with
No those are for running it to your car battery to power the charger
@@jdrcchanneltexas5497 so they give u all those connectors but not a EC5 one
I set the mAh and V correctly, but when I am charging my lipo Zeee battery, I notice that the V reading is exceeding the 7.4V that I set it to. When I check the status though, it is still less than 100% charged. Is it ok that while charging the V exceeds the 7.4 I set it to, and can I just leave it charging until it auto stops?
Yes it should be higher the battery is 7.4v but it has to use higher V to charge the battery faster. Mine typically runs between 7.5-8.0v while charging when it's done it should sit around 7.4v maybe a little higher or a little lower but should be by much. Same as when your alternator in your car in running to charge your battery it will run at around 14v but your car battery is only 12-12.5v it has to put out more cureent than the battery holds to charge it. You should be fine. Both Your cells should be right about 4.2 when charged so make sure your balance charging every time you charge so your cells match up or within 10 thousands of each other. Mine usually sit at 4190 and 4200mv on the lipo cells.
I got the zeee batteries just like yours but the adapter will not fit in the battery plug ???
Those are ec5 connectors I soldered on so it would charge. You can buy an adapter so you don't have to do any modification. You could get a (female deans) to (male whatever you have) example.. If I have a battery with a ec5.. I would get a female deans to male ec5 adapter. So one end plugs into the deans on the charger and the other end plugs into your female plug on your battery type.
Thanks , i set up as lipo , 4.6, once i press to start charging says batt check beeps and says lower cell volt but cant seem no options after that any help appreciated
Most likely the lipo is drained too low if it's giving you a low cell error.
Hello,, can you do a video on charging and discharging a 5000mAH 7.2v nimh battery. I bought this charger but I'm to dumb to figure it out.. thanks..
Super easy to do...press the + button until you see Nimh press play button. It will say charge on the screen. when you see the. A on the screen with a number in front flashing, press the + or - button again until you have that set to 5.0A that's your mah. Then press play again and then hold play button down to start charging. I will try to do a video and post it later today also. So keep an eye out for it!! Please follow me if you haven't so you'll see the video when I post it. Thanks!
Heres the video you requested hope it helps! ua-cam.com/video/dT-vEMEFQF4/v-deo.html
The 3s plug is the same size as my battery plug?
@@elidobbs5876 not sure what your asking. There isn't a specific 3s plug you just need to make sure your plug matches one of the plug types on the charger!
@@jdrcchanneltexas5497 I just bought brand new 3s batteries like the ones shown in video but the 10-1 charger doesn’t allow the plug to fit into the charging hole
Like they just butt up to each other. plastic ends only touch.doesn’t allow the female and male to connect.
Nice bro... Thanks
No problem! Glad the video helped!
The C150 charger doesn't have the right end to connect to the 5200 Z battery. I don't know if its defective or I'm missing something
What type of connector does it have? You might have to purchase an adapter from one of the other type of plug to whatever your battery has.
hey what about those new batteris that goes up to 4.35 volts, how do I usi this charger on those? thx
Are you referring to a liHv battery? If so I'm not sure as I don't run those. I'm not sure if there is 4.35v lipo battery's as I've always ran the standard lipo in all my rc's. You might have to look up the manual and see if it has the settings for that function. Sorry I couldn't help.
@@jdrcchanneltexas5497 I ended learning that you just need to put the charger on the LIHV mode instead of LIPO
Does it turn off when it’s done charging?
Yes if you have set it to the correct battery amp and cell it will stop when it reaches that amp. So a 4s lipo that is 6000mah will be set to 6.0amp and will stop when it's fully charged.
What attachment do you use for the EC5 adapter
I don't use an adapter I cut off the xt60 and soldered an ec5 on!! But they do make adapters your just have to find one from deans or xt60 to ec5
@@jdrcchanneltexas5497 thank you!!
Sorry for the dumb question but can you parallel charge on this charger?
I mean if you set the settings right technically yes. I wouldn't recommend it. Depending on what your charging. If your wanting to charge 2 seperate lipos faster I would just get the dual charger version. If your meaning an already set up parallel set of batteries I'm not sure on that would depend on what the voltage and amperage mah would all be.
@@jdrcchanneltexas5497 thanks man! You got a new sub
Thank you
What if i got a 450 battery should i put .5 a ?????????
Yes if your battery is 450mah.. .5 should be fine.
Thanks so much
Mine is the same as yours but it says 11.1V instead of 7.4 and it keeps on telling me to disconnect how do I fixit
Before starting the charge you press the arrow up or down to change from 11.1 to 7.4 or whatever size your battery is
How it won’t let me
It’s on 3s
It’s the same exact one as yours
It only lets me change the volts on every other one besides balance chagre
When do you know you are done charging
If you have it all set up correctly it will beep and say done. If you don't hear the beeping just look at it every 10-15 minutes and it should show done or full.
How do I know when it's done?
It will beep and automatically stop and say END on the screen
@@jdrcchanneltexas5497 ok thank you
Can you show us how to do it with a XT 90
Not sure what your meaning? How to use the charger with a xt90 plug on the lipo?
@@jdrcchanneltexas5497 yeah but on a c150 because my XT90 will not fit in the plug that comes with the c150
If that's what your referring to... This charger doesn't come with an xt90 only an Xt60. So you'd either need an adapter or need to unsolder or take off the Xt60 and solder an xt90 onto those wires. I actually took off one of the plugs I wasn't using and soldered a Ec5 connector on and converted all my cars and lipos to ec5 so I could charge them all the same connection. And interchange them in different cars
@@jdrcchanneltexas5497 do you think I can use my negative and positive Cable
Does anyone know how to charge a dead battery on this specific charger?
If your talking about a completely dead lipo battery most of the time you cant bring them back. They are trash at that point. Never let them get too low or they will be useless. You can somtimes set the charger to nimh and charge it for about 10 minutes to bring it back up high enough that the charger will recognize it's a lipo again and then you can start the lipo balance charge selection again. But be careful!! (I don't advise doing this if your not familiar with lipo batteries)
Thanks…
Mine doesn't came with e05 what can I do
They sell adapters from one type of plug to the other on amazon so you can go from the deans to ec5. Search male deans to male ec5 adapter. If that's what your needing. That's should work I purchased actual ec5 male and female ends and cut off the banana plug and soldered the ec5 on those wires. But the adapters are an easy solution
JESUS! Why must this be so darn difficult?? My son has no clue how to charge his RC since I got him one of these machines, so he's depending on me to do it, but the more I read the manual and watch these videos, the more I become confused.. what happened to just Plug it and Forget it??? 😠 😡
@@kraziezombie yeah unfortunately with the new lipo batteries they put out more power so they are a little more difficult to charge. Once you understand how they work and how to charge them it's a piece of cake. These types of RCs and batteries are not really for beginner's that don't have any experience with them. Some of my RCs do 100mph
Plug and forget it is when you're using basic NiMH where you can discharge it as much as you want or charge it to its full unbalanced cell capacity. With lipo batteries you're basically stacking phone batteries which is why it's slightly hurt more advanced to recharge it. Just like a phone.
This is just like any 4 button charger and if you only have the same batteries you don't even need to change any settings. Just set it up once and leave it be.