How To Attach Blade to Black & Decker power handsaw

Поділитися
Вставка
  • Опубліковано 29 жов 2024

КОМЕНТАРІ • 244

  • @edshannon4426
    @edshannon4426 2 роки тому +15

    Excellent presentation. If only other instructional videos on YT were half as good as this one it would be a blessing. Thank you.

    • @charlenearsenault2807
      @charlenearsenault2807 8 місяців тому

      Agreed! Most don't show it close enough and just "assume" you can see what's happening. This is PERFECT. Especially the repeat of it and how to disengage. how did we ever do this stuff before instructional videos!?

  • @TstormVA2012
    @TstormVA2012 7 років тому +25

    Thank you! I purchased the saw on Amazon and many of the complaints were about installing the blade. I came here first and I had no problems.

    • @dranes99
      @dranes99 4 роки тому +2

      Yes, thank you. Instructions did not make this clear at all.

    • @vianeyhernandez7538
      @vianeyhernandez7538 2 місяці тому

      donde consigo las cuchilla

  • @froregon1
    @froregon1 Рік тому +2

    I've owned this saw forever, and every time I try to use it, I forget what I had to do the previous time. Thanks for making this video!

  • @geoffreyboardman4873
    @geoffreyboardman4873 5 років тому +17

    Fantastic video! 10 second job. Sooo easy. Many people had written in on Amazon saying that it took them forever to figure it out. Many thanks.

  • @Nice475
    @Nice475 7 років тому +27

    Thanks for this video how to install the saw blade to B&D Model PHS550G reciprocating saw. I have been trying for several years. This video show the Key location. The oval key was turned 90degree in my saw somehow. I used small flat head screw driver to turn the oval key while pressing the button on the back. Once the oval key turned 90 degree, the hole in the saw lined up and snapped right in. Great! I am now able to use my saw again after several years.

    • @NerdDrops
      @NerdDrops 6 років тому +1

      Thanks, I was wondering WTF was going on with mine.

    • @ZixXxy
      @ZixXxy 6 років тому

      Thank You! MVP comment!!

    • @jeromesutter7262
      @jeromesutter7262 6 років тому +1

      Thank you for the video. My saw also came with the screw facing up. After turned the screw with a screwdriver, my saw is finally working right.

    • @ironsandputts
      @ironsandputts 6 років тому +3

      Than you. No wonder companies go under. Because they have shitty design and even shittier documentation. Been struggling to get this blade fitted in and could not. I would fire the designer, the QA person and the documentation guy!!

    • @ac.7724
      @ac.7724 5 років тому +1

      Omg, you're my hero too!

  • @kimberlyguimond4186
    @kimberlyguimond4186 5 років тому +8

    Thanks for this video. It literally took me ten seconds to put the blade in! I read the reviews of how difficult the process was and so I searched UA-cam and found your video. Got the saw out this morning and put it right in.

  • @lindaphifer3015
    @lindaphifer3015 3 роки тому +2

    I tried and tried to attach the blade. The instructions are unclear. This video helped me attach the blade and now it works great!!!

  • @fblairmd66
    @fblairmd66 5 років тому +7

    Thank you so much for this video! My husband spent about 40 mins trying to figure it out, and then I spent another 30 mins! The problem was that little nob thing on the inside was turned 90 degrees, and we just didn’t realize it until I saw how it was supposed to be on your video. I was able to turn it into the right position and the blade attached perfectly! Thanks again!

    • @pacer293
      @pacer293 4 роки тому +2

      mine is 90 degree too,how did you manage to turn it?

    • @booboowhite1
      @booboowhite1 2 роки тому +6

      @@pacer293 This was my struggle too. Turns out you have to push the black release button at the same time as inserting a screw driver into the little hole, to make the turn.

    • @timhegarty621
      @timhegarty621 2 роки тому +1

      @@booboowhite1 Same! Was concerned I might break it if I tried to turn it 90 w/ screwdriver. Thanks for the excellent tip!

  • @kmiller28
    @kmiller28 5 років тому +35

    Thanks for this. I never would have gotten the blade on with the terribly written instructions by B & D.

    • @willcbrownj
      @willcbrownj 3 роки тому +2

      Thanks so much i spent 20 minutes trying to install blade. The directions sure didn't help. Your video was great!

    • @3Dhyana
      @3Dhyana 3 роки тому +1

      I went on UA-cam because the directions are awful. Thank you!

    • @stephenwilson1797
      @stephenwilson1797 2 роки тому

      Hello, thank you very much indeed for your help. I've also bought a black and decker scorpion saw, Reading "the instructions", and the drawing, mentioned on figure 3????, and it's not shown. Much better with the video. Thanks again. 😊

  • @santamonicababygirl6453
    @santamonicababygirl6453 6 років тому +12

    You’ll never know how your simple instructions have helped me! I am tying to get my Christmas tree up and every guy in the house is sick so it’s all me 😂😂😂. THANK YOU

  • @nestorlima9836
    @nestorlima9836 2 роки тому +3

    If the piece inside doesn’t match the blade, you can turn it with a small flat screw driver through the middle opening. Thank you for your video!

    • @warrenmorphis4208
      @warrenmorphis4208 2 роки тому +1

      Nestor Lima and thank you for the screw driver tip! I had to turn the piece to fit the blade.

    • @nestorlima9836
      @nestorlima9836 2 роки тому

      @@warrenmorphis4208 glad it worked out for you!

  • @sherrysuleyman6072
    @sherrysuleyman6072 2 місяці тому

    Thank you. The written instructions were not very clear and your video made a lot more sense.

  • @Ashtarot77
    @Ashtarot77 4 роки тому

    Wish the instructions that came in the box were as clear. You saved me a headache and a half. Thank you! 😊

  • @susanpadilla6969
    @susanpadilla6969 2 роки тому

    B&D made the instructions as difficult as possible. Thanks for this clear tutorial!

  • @LynSmithmusic
    @LynSmithmusic 6 років тому +3

    Thank you!!! You saved me so much time staring at unfathomable diagrams! I did it in two seconds after watching. Appreciate your video

  • @garym.freedman2847
    @garym.freedman2847 2 роки тому

    Your video was a lifesaver I couldn’t figure out why my blade was not going on I even tried turning the little thing inside but until I saw your video I couldn’t figure out how to do it. Thank you

  • @cacocorlino3666
    @cacocorlino3666 2 роки тому

    My unit was in the locked position with no blade in it. Could figure out how the hell to connect the blade. I saw your video and realized I needed to rotate the lock with a flathead screwdriver. It works now. Thank you

  • @apolloobserved
    @apolloobserved 4 роки тому

    Thanks so much! I read the instructions and found it confusing. Your description was better than manufacturer!

  • @keithconner6495
    @keithconner6495 Рік тому

    Excellent explanation. Thank you for sharing. A different video had me failing miserably

  • @zeestark753
    @zeestark753 4 роки тому +3

    Wouldn't have known what to do without this video. Thank you!

  • @yolandagunselman7639
    @yolandagunselman7639 3 роки тому +1

    Thank you sooo much I’m too old 68 and I have some problems… but with your video I do !♥️♥️♥️

  • @jasilbar
    @jasilbar 10 місяців тому

    Thank you! The instructions with the saw were not clear at all. Much appreciated.

  • @bluejoy8869
    @bluejoy8869 Рік тому

    Thank you so much for putting this video on UA-cam! I was able to replace my blade without too much problem. That shape that’s inside was going up and down instead of sideways so I figured out I had to turn that part in order to get the blade in. Which took a screwdriver into that slot and turn in it. Bingo! Thank you again!

  • @lindatomaselli7013
    @lindatomaselli7013 4 роки тому

    As someone else commented, my oval shaped pin was not pointing horizontally; it was vertical. I had to take the saw apart by removing all of the screws, pushing in the black button on the other side to get it to protrude out from the metal housing, and then turn it.It took a few tries, but it now works. This was an old saw that my husband adored. He even gave it a name: Andre'. We had just bought a new one, and it came with the same defect: the pin pointed in the wrong direction. We bought online it from Home Depot, but when we brought it back to the store, even the "pros" could not figure out what was wrong. thank you so much for leading us in the right direction!

    • @lisamoran7234
      @lisamoran7234 2 роки тому

      Thanks so much, the oval pin was turned vertical on mine too; this really helped.

    • @mjh5437
      @mjh5437 2 роки тому +2

      @@lisamoran7234 You don`t need to take the unit apart,you just press the black button on the other side and poke a screwdriver in to turn the pin.

  • @mgee8545
    @mgee8545 3 роки тому +1

    Thank you for this. After reading the reviews on Amazon I was really dreading having to get the blade in. But, I really needed a little saw like this. Also, like many others, I not only have trouble understanding written instructions but also reading the tiny print they use to save money. This goes for almost anything any more.

  • @LorileiSuesHonestReviews
    @LorileiSuesHonestReviews Рік тому +2

    What if the little black knob thing is faced the other direction and isn't lining up with the saw hole? I tried sticking a screw driver in there to turn it and I seemed to have pushed it farther up.

  • @philmarsh5593
    @philmarsh5593 5 років тому

    Just bought one and the instructions made no sense - and yet this is so easy! Thanks for demo'ing that.

  • @samboreham1788
    @samboreham1788 2 роки тому

    Thank you! Got it from Amazon and all the reviewers moaning about how bad the instructions are…well they are t that clear. Just have to Google for a tutorial and I can across yours. Excellent instruction, thank you ⭐️⭐️⭐️⭐️⭐️

  • @lynn7633
    @lynn7633 Рік тому

    Thank you for being precise and to the point, I just watched a video and they guy doing it couldn't even get the blade on, he fastforwarded to having in it and at a pile of limbs, waste of my time. Thank you! Got it the first time after watching your video.

  • @ealingbroadway2000
    @ealingbroadway2000 6 років тому

    Great help this video was, given an old used one with no blades, bought a 3 pack and didn’t know how to fit. Working brilliant now 👍

  • @connection6338
    @connection6338 3 роки тому

    I watched a few videos before and couldn’t do it! 😂😂😂
    Watched yours, did it straight the way!
    Thank you! ❤️‍🔥❤️‍🔥❤️‍🔥

  • @Linda-lo6sh
    @Linda-lo6sh 3 роки тому +1

    Thanks for the video.. still the problem is whta do i do when that little black metal piece inside doesn't turn with the saw? or doesn't pop up & stay up? Love the saw as long as it keeps working for me!

  • @Lisa-hm5gy
    @Lisa-hm5gy Рік тому

    Thank you for this video, it’s the only one I refer to each time I need to change the blade and can’t remember how. 😁

  • @T-Square
    @T-Square Рік тому

    Thanks a million for the video That is a change from a previous instrument by Black& Decker to get a screwdriver and turn the screw to double-lock the blade in position. Your video is very clear thank you.

  • @fredendres6779
    @fredendres6779 2 роки тому

    Thank you, thank you, thank you. Clear, precise, short.

  • @karenhendricks2956
    @karenhendricks2956 5 років тому

    Thank you, thank you, thank you. I needed this last year and didn't think about looking for an instructional video. I thought this was broken until I viewed your video. I really really appreciate you doing your video. Again thank you very much

  • @lisainnewarknj8313
    @lisainnewarknj8313 3 роки тому

    Thank you, friend! This video is still relevant in 2021. Happy Summer!

  • @desmondjones2422
    @desmondjones2422 4 роки тому +4

    Thank you for this very helpful video. Arriving yesterday, I had my suspicions that the box my saw was in had been re-purposed, perhaps from a return by a previous owner. As I struggled with the blade installation, I thought the worst. Thanks also to Nice475, below, for the important part of how to get the locking pin back to parallel,to the bottom of the saw. Having put a lot of torque left and right on my vertical locking pin, the information, "while pressing the button on the back", was a savior.

  • @shanghai264359
    @shanghai264359 4 роки тому +4

    Mystery solved! Thank you so much for posting this.

  • @kgogolewski
    @kgogolewski 3 роки тому

    thanks from a lady who couldn't figure it out. I thought I'd gotten a broken one until I watched your video, lol

  • @gillevans9883
    @gillevans9883 2 роки тому

    So glad I looked at this video, the instructions seem to imply the pin has to be in the other position and I’ve spent ages trying to turn it to lock the pin in position!!

  • @jedionboard1233
    @jedionboard1233 3 місяці тому

    Thank you, this video makes more sense than the instruction leaflet.

  • @JaeGravley
    @JaeGravley Рік тому +1

    I went to use my saw again and couldn't get the blade on. I rewatched this video and realized the locking pin was turned 90 degrees and that's why I couldn't get the blade to fit on it. The saw instructions say to take a flathead screwdriver to rotate it. Hint: press the blade release button if you can't get it to turn.

  • @rockeysingh8841
    @rockeysingh8841 2 роки тому +1

    Most excellent demonstrations.All others should emulate you.

  • @mwhittaker9159
    @mwhittaker9159 Рік тому

    Thanks very much for posting this instructional vid - super helpful which the printed directions weren’t

  • @ingridblohm-hyde805
    @ingridblohm-hyde805 Рік тому

    Excellent presentation. Thank you so much, I was not able to figure this out without this video.

  • @tonywhetton9015
    @tonywhetton9015 3 роки тому

    Thanks, good instructions. Like as others say, instructions in manual are very vague!

  • @aleksandrpipchenko426
    @aleksandrpipchenko426 Рік тому

    The video hits the spot )) So many people on Amazon are actually talking about this one.

  • @druidriley3163
    @druidriley3163 5 років тому +1

    Thank you so much for the easy and clear instructions!

  • @DreadyheadGreiSkies
    @DreadyheadGreiSkies 5 років тому

    Thank you as I was having the hardest damn time getting the blade on until I saw your video, I had to push the lever and rotate it and then it popped right on . Thanks again

  • @SuperKomedyKing
    @SuperKomedyKing 5 років тому

    Thanks for this, I'm usually fairly perceptive with these little latches and attachments, but this one I could NOT figure out. Until watching!

  • @noam6249
    @noam6249 2 роки тому

    Dear Lord! Thank you so much because I could not understand the printed instruction diagram. Thank so much for this!!! 🙂🙂🙂🙂

  • @geraldharper330
    @geraldharper330 5 років тому +1

    Thank you, Awesome demo...worked like a charm. would never have figured it out without this video

  • @leehogg4624
    @leehogg4624 2 місяці тому

    Thanks for explaining this. The manual was rubbish with just ztupid pictures and other people can't explain it.

  • @ronaldbond1471
    @ronaldbond1471 2 роки тому +1

    The problem I had was the mounting post was out of position... with the close up view of the slot in the mounting post position as seen in the video, I thought a screwdriver blade might help me turn it to the mounting position..... it worked. Turned it to the mounting position, inserted the blade, place it on the post, pushed it up to the cutting position and click, locked in the cutting position..... poor pre-shipping inspection. What a pain and a lot of miles driven to two closed repair centers after being referred to them.

  • @adelinedoyle6603
    @adelinedoyle6603 5 місяців тому

    Perfect presentation, helped me 💯 thank you

  • @Birdman23i
    @Birdman23i 2 роки тому

    films128 > Black and Decker instructions. Thank you sir!

  • @Felixsusan
    @Felixsusan 5 років тому +1

    Thanks, mate! Just unboxed mine and was trying for ages. The instructions say to make sure that thing is pointing downwards, but says nothing about where the blade locks in! Was looking in totally the wrong place, would never have figured out it goes in underneath

  • @angelasmith8384
    @angelasmith8384 3 роки тому

    The instructions that came with the saw are useless. Thank you so much for this!

  • @89geo437
    @89geo437 6 років тому

    mine was turned also. your solution worked for me too. Thanks!

  • @RAJRaj-cn8mh
    @RAJRaj-cn8mh 4 роки тому +2

    If the metal piece inside does not match, just keep the release button pressed and align the piece/pin with the shape of the blade-hole.

  • @craigmaclaren7635
    @craigmaclaren7635 4 роки тому

    Great video. Thanks for the commentS as well. I had to use a screwdriver to rotate the piece the blade fits on

  • @leoheuzen5521
    @leoheuzen5521 Місяць тому

    Thank you very much, I'm glad I found this video, it helped me a lot XXX

  • @paulvenables5432
    @paulvenables5432 3 роки тому

    Thank you. That is really clearly explained!

  • @CHENPEGGY199
    @CHENPEGGY199 6 років тому

    Thank you for the video
    It makes the installation of blade much easy

  • @MsDebster68
    @MsDebster68 4 роки тому

    Many thanks for this video you have helped tremendously I’ve stopped ending up in a & e regards London 🇬🇧 medic 👍

  • @shirleyvoss2572
    @shirleyvoss2572 4 роки тому

    Thank you very much as I am a novice never had to do pruning before ....

  • @cycaster
    @cycaster 4 роки тому +1

    Thanks, you most likely saved me hours! :)

  • @sundance1865
    @sundance1865 4 роки тому

    You are awesome! Thank you for taking the time to make this video! It made a difference.

    • @PoohBeer6342
      @PoohBeer6342 3 роки тому

      Why is little object that the blade goes over is in the other direction

  • @jeiger
    @jeiger 3 роки тому

    Lifesaver. Thanks for uploading!

  • @THEVOICEOFTHECHOSENONE
    @THEVOICEOFTHECHOSENONE Рік тому

    Thanks for sharing! Great video! Safe me time and a lot of stress

  • @222Gai
    @222Gai 6 років тому

    Thank you for such a clear, instructional video. I was not looking forward to changing the blade, remembering how very complicated it seemed when I last did it, many moons ago. Thank you too, to Nice475, for the tip on adjusting the socket into which the blade must go, when it is out of alignment.

  • @steelwind345
    @steelwind345 4 роки тому +3

    Crazy how long I spent on their dumb instructions. Thank you!

  • @iandenyer7450
    @iandenyer7450 6 місяців тому

    Thanks...
    It took me longer trying to figure out how to get the blade in place (only succeeded after watching your video) than to do the job I bought it for.....
    The instruction image was hopeless. One paragraph of instructions (rather than four pages of "Do not use the saw while in the bath", "Do not operate with the saw blade in your mouth", "Do not give to a three year old to play with" guff) from the manufacturers would have be useful...

  • @adriennekennedy7172
    @adriennekennedy7172 9 місяців тому

    Thank you, your video is very helpful.

  • @cherie5649
    @cherie5649 3 роки тому

    THANKS!!!! You made is so easy for me.

  • @e16006
    @e16006 8 років тому +1

    Great. This is the only tutorial on this. Thank you.

  • @BG-dz6ri
    @BG-dz6ri 3 роки тому

    Thanks so much. I had to rotate the gizmo before the blade would fit.

  • @josephmarr1664
    @josephmarr1664 2 роки тому

    Black & Decker should revise their instructions by simply providing a link to this UA-cam video.

  • @honeydelapa8266
    @honeydelapa8266 Рік тому

    Thank you! I got the blade on. 😊

  • @JayW256
    @JayW256 4 роки тому

    You're a lifesaver. This is so easy but their instructions are so terrible. Thank you.

  • @michaelblackwell9447
    @michaelblackwell9447 2 роки тому

    Thank you!!!!! Great instructions!

  • @josephhanley668
    @josephhanley668 3 роки тому

    Thank you your video was very helpful

  • @jeanettesilhouette5678
    @jeanettesilhouette5678 4 роки тому +1

    You, my friend, are the bomb!

  • @loishastings9098
    @loishastings9098 6 місяців тому

    Thank you! The instruction booklet wasn't this helpful.

  • @CynthiaAAzzam
    @CynthiaAAzzam 5 років тому

    That was a great informative video. Thank you so much.

  • @lisalisa4182
    @lisalisa4182 Рік тому

    You are doing God's work!😂
    Thank you so much!👍🏽😁

  • @nyeirish2673
    @nyeirish2673 2 роки тому

    Thanks! This really helped!!

  • @LuvBlues64
    @LuvBlues64 3 роки тому

    Excellent instructions,thank you very much...

  • @lindacollins3881
    @lindacollins3881 7 років тому +7

    the piece is not parallel and we have tried using a flat head screwdriver and it absolutely will not move. what do i do now

    • @robertalberti490
      @robertalberti490 6 років тому +8

      Press blade release button while turning with screwdriver. Drove me nuts till I saw second UA-cam video on this.

    • @marybethg5505
      @marybethg5505 5 років тому

      Omg thank you so much this seemed Possible to get back on due to the alignment thank you think you thank you

  • @alanhesketh9265
    @alanhesketh9265 10 місяців тому

    Easy when you know how, but I find you have to use a fair bit of pressure to push that blak button in. It's a great saw otherwise.

  • @josephelibert2464
    @josephelibert2464 3 роки тому

    The instructions that came with the product is horrible....thank you for making it easier.

  • @darrenskidmore230
    @darrenskidmore230 3 роки тому

    Fantastic and Brilliant very helpful video.

  • @bb1111116
    @bb1111116 4 роки тому

    Video was helpful. Much better than the instructions in the box. But this was not easy to do.

  • @jamilachowdhury7278
    @jamilachowdhury7278 4 роки тому

    what is major difference between it and Black & Decker KS890ECN Scorpion Saw ?

  • @JaeGravley
    @JaeGravley Рік тому

    You're awesome! Thank you!

  • @christopherminor3231
    @christopherminor3231 3 роки тому

    Super helpful. Thank you!

  • @mrcyflft
    @mrcyflft 7 років тому +1

    Should have just come to your tutorial video before bothering to attempt what the instruction manual has written in it...(thanks, got the blade in, safely locked for use & will be demolishing many things today in the kitchen...) ✨🤙🏼✨

    • @bonnieplumer4590
      @bonnieplumer4590 6 років тому

      My saw's manual has NO instructions for removing or replacing blades, except to tell you to unplug it!

  • @joywilliams9099
    @joywilliams9099 6 років тому

    Just received my saw. This video and the comments below are very helpful. However, that oval key on my unit is not centered in the access area and is at an angle as others stated. The notch for the screwdriver is blocked by the plastic guard on the unit so I can't access it to try to turn the key around. This is probably why the release button doesn't seem to work at all. Guess I'll have to drive 14 miles to Home Depot and have one of them adjust it for me or replace it. Too bad I needed to use it today.

  • @trishkristek7484
    @trishkristek7484 2 роки тому

    Awesome thank you! Great instructions!