Helpful video bud. Restoring my 88 gt and wanted to change my grey interior to black but really didn't want to pull the dash for spraying. Seeing this gives me the confidence to do it myself. Great tips and really appreciate the modest and very honest approach to how you present yourself on your channel. Keep the content coming!
This is exactly what I’m doing with my 1990 GT! Bought the satin black for everything and was worried about the dash as well. Glad to see that it’s doable
Just put a little tree over here, maybe a little bird over there..... oh oh and some big blocks of aluminum riiiiiight here. Lol good video man! Love to see the humor between Andrew and yourself.
Man! Brew2l I just dyed a good set of grey tweed seats with the satin black that you recommended in another video! I am surprised how the seats turned out money staying in my pocket as I am already in it for way more than I ever imagined. Thanks to your recommendation on the color! Thank you
Loving the outcome. A heat gun after all is prepped for spray with melt and blend in deep scratches! Scratch up again and clean and spray away! Unless the wife watches your channel she'll never know that 2days after buying her new truck that I tore up the cargo area with a fender! Lol
Looks great. I’m actually in the middle of doing a black interior dye job on my coupe using your old video of spraying interior parts as a reference. Man people just don’t understand what a diff the fresh interior paint makes!!!!
Dude stays dropping knowledge. I had no idea that all dashes were dyed. Makes me feel a little better about my cracked one. I can just find a new one I'm better condition and dye it.
8:33 whats that black towel looking thing Andrew is painting on? i've seen it before in your videos but never knew what it was. what else do you use it for?
I love the adhesion promoter. It made the SEM stick to my boat seats like glue. The finish was very tough. I've tried SEM without using the adhesion promoter before, and the paint flaked off. This stuff is all paint NOT a dye. The trick with the adhesion promoter, is you have to get the timing right. If it says wait 10 minutes, wait exactly 10 minutes. Follow the instructions to the letter. The adhesion promoter must contain some form of acid... it will burn your skin. I noticed it also "burned" into the surface of the boat seats. But this makes sense because when they're slightly "melted" on the surface, they're ready to bond with any paint that is sprayed on them. Because the adhesion promoter is a glue that is also going to "melt" into the paint as well. So you essentially have the paint gluing itself to the surface. That kind of bond is much tougher than just letting the paint lay down on top of the surface, and hoping it sticks and doesn't flake. For me, without the promoter, it flaked. With the adhesion promoter, it was tough as nails. Just my experience. I'd never use SEM without the adhesion promoter.
2?... 1) what did you use to paint the vent dots 2) did you use the same black on the top part of the dash on the quarter panels. Taking notes thanks for your videos
Lookin good. My buddies laugh cause I refer to my 89 grey interior as 18 shades of grey from the factory lmao it drives me NUTS. I wanted to dye it all black but scared of how it would turn out or if it will wear off
BREW2L well I’ve got it ALL out of the car right now so I may go ahead and pull the trigger then lol Thanks for all the videos they are more help to us viewers than you’ll ever know 👍
Jamey Richardson The SEM dye holds up well I've used it on a Crown Vic door panel have daily drove it and it's still there , I was skeptical at first but I'm a believer now I'd recommend the SEM . And it looks even better over time .
I absolutely love watching your channel! So much information, yet you simplify it. Anyway, I have a 1992 LX 5.0 Deep Emarald Green exterior with grey interior. I bought her brand new in Tustin, California, and absolute love this car. It's time to refresh her and get it back on the road. The heads it turned when I drove it regularly several years ago, was amazing. Anyway, to my question..... I found a few cracks near the screw heads in the interior, particularly in the back on the large panels you show in this video. Do you have any recommedations on repairing these? Thanks in advance from Savannah, Georgia!
Bru2le l, Gear head was right, the speed you guys out that car together is amazing. I been trying to get my quack together for about three years. And still it's only about half the car yours is. Life's ruff over here man, time only allows two or three days out the month. I don't know what gear heads complaining about.
Love your videos. So true with interior grey, nothing matches. LOL!!! 😂 I thought I was buying the wrong color. Now thanks to you I’m getting it done to all match!👍
Man I love watching the dye transformation. Ok, I’ve been wanting to ask you for a while but what are those red shoes you are wearing. I need a pair, of course I’d call them Bama red not Georgia red. Lol.
Was really stressing about my sun baked panels but seeing how you made this look so simple a caveman could do it I can be more overwhelmed to start refinishing my interior thanks all the informative videos keep up the good work!!
Really looks great on video the panels look like new learned alot about foxbodies you're doing a great job even new vehicles have flaws keep the video's coming great job
Badass video man love the attitude positive and making it seem easy as it is. “Don’t Over Think It, Just Do It” Totally seem like a fun Dad man Huge Props God Bless Your Family Brotha 🙏🙌 Just Earned A New Sub 🤙
Not related to this video but what size spacers did you use for front and back on your red gt I bought the same set because I liked yours please answer first time responding to any video mitch texas
What are the odds that you’ll do a video on restoring quarter windows? I recall seeing something in your channel before but can’t find it. Thanks, keep up the awesome work!
Is that Presideo the same color used on the carpet? I used the Presideo on my plastic it looks great, but the carpet looks a little darker. Any suggestions?
Hi Mr BREW2L Do you have a good videos for the Ford Mustang Fox body 1993 also you’ll make a lot of solution for myself to repair my car thank you go ahead I have a one question ؟ How I can found a wire line for the harness dashboard to Sensor temperature . I’m musabbeh from United Arab Emirates thank you
That’s extra time we can’t afford to take at the moment. I’ll come back to it at some point.. we have to finish this interior so we can move on to what’s in that box... 💪😎
@@BREW2LFOXBODY In pictures it looks like it goes between the accumulator lines but not sure. I'm trying to figure out where to put it through the fire wall.
@@BREW2LFOXBODY Thanks buddy. I'm rebyikding this with my son and you are an inspiration. Ive had it as a daily driver for 26 years. Want to get it on the road with him 100% ac/heat. Thanks again. Your vids are great. We watch them all. Long live the foxs!
I just did my 89 gt vert the nappa red /porno worked out beautifully as long as you prep it right and the humidity is low and take your time . Thanks for the tip love your videos !
Hell yeah brother! Great and informative video. I'm about to Dye the interior of my Datsun, and have bought the SEM Dye due to great videos like yours. Its a bit hard to get here in Australia unfortunately! Your interior came out great. Good info about not worrying with the adhesion promoter, i forgot to buy that and was stressing, but ill take your word it will all be ok. Rudi.
SEM isn't a dye, it's elastomeric paint. it's better to coat it on with several layers rather than mist it on, it'll last longer that way. it's meant to go on thick
Love this thanks for uploading this video :) Im a car girl from the UK I imported my Mustang 3 years ago from California so it was rust free but the interior was trash with a lot of the interior plastics crumbling like cookies :( A Pillar,B Pillar and C pillar covers its taken me up to know to find good replacements and my dash was very badly damaged. i now have all the bits I need but they are all different colours and shades some Green, some Blue,some Tan my interior should be Blue! You cannot get SEM here in the UK well you can you can get the prep products and very basic colours but I ordered mine from USA came over in a shipping container of parts. I was about to buy SEM adhesion promoter when I saw your video so now not too sure? I am guessing now i just need to scrub the hell out of the parts then grey scotchbrite with alcohol? I was worried about Blue going over Tan and Green but guessing it will cover it ok? My rear cards have had some work to repair and custom work so are sanded smooth now so planning on using Sem Texture to get the texture back not sure if I need to do anything special with that or just use alcohol and scotchbrite Sem texture and them SEM Blue over the top? Was worried as the SEM texture is black only but guessing watching this the blue will cover it well? Thanks Jo
Great video. I am doing the same on my '90 LX that is titanium gray interior. Does the SEM grey your using for the titanium interior? I was getting ready to order some, thanks.
Curious how well I can redye my blue interior to black including the door panels. My interior pieces are pretty mint though so I dont want to destroy anything
That shit is Gangsta ninja!!!!! I had no idea thats how factory did it and how u could re-spray it just like dat broski! If u get a chance send me a shout out for distributor boot. And i do know its a small piece 💪😎
would this dye work to change colors? for example i have grey and black interior but i want it all black. ford no longer makes these pieces and ebay parts are ridiculously expensive, lmk sir!!
Yeah it does I just painted my interior witch is red but I needed some plastic trim pieces a junk yard had a gray fox interior I painted it came out sweet! Most important thing is you have to clean very good and no humidity
Hey brew the car is really coming together man and it's great to see you and Andrew working together!! Working on hot rods can really bring family together! And want to give you👍👍👍👍👍👍👍 You always go into detail about everything. You seem to know a lot about a fox body
Helpful video bud. Restoring my 88 gt and wanted to change my grey interior to black but really didn't want to pull the dash for spraying. Seeing this gives me the confidence to do it myself. Great tips and really appreciate the modest and very honest approach to how you present yourself on your channel. Keep the content coming!
This is exactly what I’m doing with my 1990 GT! Bought the satin black for everything and was worried about the dash as well. Glad to see that it’s doable
Which SEM color was the gray spray? Thinking of redoing mine. Ty in advance.
Just put a little tree over here, maybe a little bird over there..... oh oh and some big blocks of aluminum riiiiiight here. Lol good video man! Love to see the humor between Andrew and yourself.
Lmao, thanks Jeffry😂
And don't forget it has to be a v8
Man! Brew2l I just dyed a good set of grey tweed seats with the satin black that you recommended in another video! I am surprised how the seats turned out money staying in my pocket as I am already in it for way more than I ever imagined. Thanks to your recommendation on the color! Thank you
Loving the outcome. A heat gun after all is prepped for spray with melt and blend in deep scratches! Scratch up again and clean and spray away! Unless the wife watches your channel she'll never know that 2days after buying her new truck that I tore up the cargo area with a fender! Lol
Lmao! I use that trick sometimes, actually I just did that on a rear panel earlier
This video gives me so much motivation to get mine done! Love this stuff.
You got this brother! 💯🔥
I am trying to do the same on my Jeep YJ watching this video gave me motivation
Panels came out super fresh!! Nice work
Looks great. I’m actually in the middle of doing a black interior dye job on my coupe using your old video of spraying interior parts as a reference. Man people just don’t understand what a diff the fresh interior paint makes!!!!
Dude stays dropping knowledge. I had no idea that all dashes were dyed. Makes me feel a little better about my cracked one. I can just find a new one I'm better condition and dye it.
8:33 whats that black towel looking thing Andrew is painting on? i've seen it before in your videos but never knew what it was. what else do you use it for?
It’s just a harbor Freight blanket. We use them for everything
@@BREW2LFOXBODY Nifty!
I love the adhesion promoter. It made the SEM stick to my boat seats like glue. The finish was very tough. I've tried SEM without using the adhesion promoter before, and the paint flaked off. This stuff is all paint NOT a dye. The trick with the adhesion promoter, is you have to get the timing right. If it says wait 10 minutes, wait exactly 10 minutes. Follow the instructions to the letter. The adhesion promoter must contain some form of acid... it will burn your skin. I noticed it also "burned" into the surface of the boat seats. But this makes sense because when they're slightly "melted" on the surface, they're ready to bond with any paint that is sprayed on them. Because the adhesion promoter is a glue that is also going to "melt" into the paint as well. So you essentially have the paint gluing itself to the surface. That kind of bond is much tougher than just letting the paint lay down on top of the surface, and hoping it sticks and doesn't flake. For me, without the promoter, it flaked. With the adhesion promoter, it was tough as nails. Just my experience. I'd never use SEM without the adhesion promoter.
With steering wheel you like best the one with the air bag or the tilt non air bad
Actually I like the non air bag best, but for the look I’m going for I’ll be switching to the air bag steering wheel.
2?...
1) what did you use to paint the vent dots
2) did you use the same black on the top part of the dash on the quarter panels.
Taking notes
thanks for your videos
Great job Brew2l, that dash and panel looks amazing. You sure have skills.
Thanks brother, anyone can do it 🤟
looks great brother. i wonder how that paint you used holds up against the duplicolor interior paint?
I would venture to say the SEM would hold up better, their products are second to none.. but I’ve honestly not tested them side by side.
Awesome! How do the door panels turn out tho.... mine is perfect just really faded! And it's the titanium color
I haven’t gotten to them yet... coming soon though
Great video.
It's nice to see it's not too tough to dye parts to switch color. Thanks for sharing this.
Does the dye come off the painted areas easy? The interior is looking as good as the outside.
Wow before and after looking good. Will you be upgrading the motor? Blower or Turbo?
Lookin good. My buddies laugh cause I refer to my 89 grey interior as 18 shades of grey from the factory lmao it drives me NUTS. I wanted to dye it all black but scared of how it would turn out or if it will wear off
I promise, if you prep it correctly it will last as well as factory
BREW2L well I’ve got it ALL out of the car right now so I may go ahead and pull the trigger then lol Thanks for all the videos they are more help to us viewers than you’ll ever know 👍
That’s funny and know what you mean. My 89 LX 5.0 needs grey interior done too. When I get done it will all match finally.
Jamey Richardson The SEM dye holds up well I've used it on a Crown Vic door panel have daily drove it and it's still there , I was skeptical at first but I'm a believer now I'd recommend the SEM . And it looks even better over time .
I absolutely love watching your channel! So much information, yet you simplify it. Anyway, I have a 1992 LX 5.0 Deep Emarald Green exterior with grey interior. I bought her brand new in Tustin, California, and absolute love this car. It's time to refresh her and get it back on the road. The heads it turned when I drove it regularly several years ago, was amazing. Anyway, to my question..... I found a few cracks near the screw heads in the interior, particularly in the back on the large panels you show in this video. Do you have any recommedations on repairing these? Thanks in advance from Savannah, Georgia!
Hey man love the work just have to know why didn’t u get the pull the dash to paint it and do the evap while it was out.
No need to brother, the evaporator is fine in the car.
That’s great man we’ll keep up the good work look forward to your videos every week.
man can you please do a video about vacuum lines 😞 where they go from the vacuum tree and if possible where to get them
If we get time I’ll look into it 👍
Bru2le l, Gear head was right, the speed you guys out that car together is amazing.
I been trying to get my quack together for about three years.
And still it's only about half the car yours is.
Life's ruff over here man, time only allows two or three days out the month. I don't know what gear heads complaining about.
Love your videos. So true with interior grey, nothing matches. LOL!!! 😂 I thought I was buying the wrong color. Now thanks to you I’m getting it done to all match!👍
Love it! Make it happen brother!
Man I love watching the dye transformation. Ok, I’ve been wanting to ask you for a while but what are those red shoes you are wearing. I need a pair, of course I’d call them Bama red not Georgia red. Lol.
Lol, they are Hey Dude shoes. They come in a ton of different colors👌
Was really stressing about my sun baked panels but seeing how you made this look so simple a caveman could do it I can be more overwhelmed to start refinishing my interior thanks all the informative videos keep up the good work!!
Great video man, about to do mine. Just wanted to know what's the closest white paint is for Oxford white. Seems like sem doesn't have Oxford white.
Put a Cobra Emblem on the Dash instead of the Running horse. Make it your own personal Calypso Cobra Clone.
Not a bad idea... 🤔
Really looks great on video the panels look like new learned alot about foxbodies you're doing a great job even new vehicles have flaws keep the video's coming great job
Badass video man love the attitude positive and making it seem easy as it is. “Don’t Over Think It, Just Do It” Totally seem like a fun Dad man Huge Props God Bless Your Family Brotha 🙏🙌 Just Earned A New Sub 🤙
Not related to this video but what size spacers did you use for front and back on your red gt I bought the same set because I liked yours please answer first time responding to any video mitch texas
I don’t run spacers on the retro fox. But you can run a 5/16 on the rear if you want.
Awesome
Your the man love this channel! You inspired me to make my own channel on a sn95 build! Thanks for the vids
HorseRacing4.6 awesome 👏 that’s what I’m talking about! Get out there and get after it!
What are the odds that you’ll do a video on restoring quarter windows? I recall seeing something in your channel before but can’t find it. Thanks, keep up the awesome work!
thanks I need too do mine also. SO I need to match up my red in my 82 hatchback.
Please do a detailed Vid on the Door trim panel restorations.
Is that Presideo the same color used on the carpet? I used the Presideo on my plastic it looks great, but the carpet looks a little darker. Any suggestions?
By far my favorite channel thanks for all that you do sir
Super interested in how this turned out after months of use?
Any updates?
Hi Mr BREW2L Do you have a good videos for the Ford Mustang Fox body 1993 also you’ll make a lot of solution for myself to repair my car thank you go ahead
I have a one question ؟ How I can found a wire line for the harness dashboard to Sensor temperature .
I’m musabbeh from United Arab Emirates thank you
eBay is your best option. But you’ll probably have to buy the entire harness if you find one.
Which is a close enough gray code for titanium gray?
Yeah, I wonder what the package is too 🤔
All I think about looking at this stripped interior is...Heater Core.
That’s extra time we can’t afford to take at the moment. I’ll come back to it at some point.. we have to finish this interior so we can move on to what’s in that box... 💪😎
@@BREW2LFOXBODY I hear ya, looking forward to it! 🤜💥🤛
I just replaced my heater core and evaporator. Where does the vacuum line go through the fire wall? Can't figure it out thanks buddy
It goes into your vacuum tree under the dash and out to the intake under the hood.
@@BREW2LFOXBODY I know that buddy but where does it come through the fire wall? Thanks for answering.
@@BREW2LFOXBODY In pictures it looks like it goes between the accumulator lines but not sure. I'm trying to figure out where to put it through the fire wall.
Dan Coover it comes out of the foam surrounding the heater core inlets
@@BREW2LFOXBODY Thanks buddy. I'm rebyikding this with my son and you are an inspiration. Ive had it as a daily driver for 26 years. Want to get it on the road with him 100% ac/heat. Thanks again. Your vids are great. We watch them all. Long live the foxs!
Where did u buy that paint spray?? Need sum for my new edge my interior looks like shit.. car looks awesome bro
Thanks, I bought mine from our local paint store. But amazon sells it I believe.
Thanks man yeah I was able to find one at my local parts store👍🏻
What do you use on the trim around windows ext the black? Mine is so worn it showing the metal color
SEM trim black on the outside
What's the paint code to the greY??
Just pulled everything out of my 79, definitely going to use this. Thanks.
I just did my 89 gt vert the nappa red /porno worked out beautifully as long as you prep it right and the humidity is low and take your time . Thanks for the tip love your videos !
Did you use adhesive promoter? And how many cans does it take to do a dash
@@jasonbuben2708 I used promoter I used 1 can of paint but if your changing colors you might need 2
🤣😂 yes BREW2L. 9:24 love the quote!
Thanks for this video, im gonna have a go at fixing mine before i buy new parts.
i want to make fox's interior all black, should i just buy the black Dye or something else with it ? right now it's same interior as you.
Hell yeah brother! Great and informative video. I'm about to Dye the interior of my Datsun, and have bought the SEM Dye due to great videos like yours. Its a bit hard to get here in Australia unfortunately! Your interior came out great. Good info about not worrying with the adhesion promoter, i forgot to buy that and was stressing, but ill take your word it will all be ok.
Rudi.
After being painted does it feel like the original part surface or different?
How is the durability on plastic and does it scratch or chip with your finger nail?
How to overspray everything around your dash.
I've got to give the SEM paint a 5 star rating it holds up well and has good coverage and looks right after it dries .
SEM isn't a dye, it's elastomeric paint. it's better to coat it on with several layers rather than mist it on, it'll last longer that way. it's meant to go on thick
the flag blowing in the breeze is so beautiful
Car looks amazing! Question about the prep spray. Is it straight rubbing alcohol or is it diluted at all?
I was curious on that too .. did you ever find out ?
How many cans do you think I would need to do the c panels, trunk panels and kick panels on my hatchback?
Love this thanks for uploading this video :)
Im a car girl from the UK I imported my Mustang 3 years ago from California so it was rust free but the interior was trash with a lot of the interior plastics crumbling like cookies :(
A Pillar,B Pillar and C pillar covers its taken me up to know to find good replacements and my dash was very badly damaged.
i now have all the bits I need but they are all different colours and shades some Green, some Blue,some Tan my interior should be Blue!
You cannot get SEM here in the UK well you can you can get the prep products and very basic colours but I ordered mine from USA came over in a shipping container of parts.
I was about to buy SEM adhesion promoter when I saw your video so now not too sure?
I am guessing now i just need to scrub the hell out of the parts then grey scotchbrite with alcohol?
I was worried about Blue going over Tan and Green but guessing it will cover it ok?
My rear cards have had some work to repair and custom work so are sanded smooth now so planning on using Sem Texture to get the texture back not sure if I need to do anything special with that or just use alcohol and scotchbrite Sem texture and them SEM Blue over the top?
Was worried as the SEM texture is black only but guessing watching this the blue will cover it well?
Thanks
Jo
Great video! Thanks to you I have the balls to work on my own notchback
What color? Where did you get the SEM paint? I have a 91 with titanium
What colour/type is the grey?
Hey is that N-41 is it a sealer or just paint??
After 2 years is it holding on?
Great video. I am doing the same on my '90 LX that is titanium gray interior. Does the SEM grey your using for the titanium interior? I was getting ready to order some, thanks.
Sweet!! I'll be doing mine black soon. Came out great
Hey BREW2L Where Do You Get The SEM Dye At I Need To Do My Foxbody Interior That Looks Damn Good
what percentage is the Isopropyl Alcohol ?????
Could i use this on my trucks interior its a 91 c1500 and i want to restore the interior color on the truck since its a light color and didnt age well
Curious how well I can redye my blue interior to black including the door panels. My interior pieces are pretty mint though so I dont want to destroy anything
You ever try this yet? I was wondering the same
@@keepitlive7098 No sir, I decided to keep it blue. My door panels are in to great of a shape besides the cardboard backing
@@4eyefox yeah i probably wouldnt of messed with it either thanks for the quick reply tho
That shit is Gangsta ninja!!!!! I had no idea thats how factory did it and how u could re-spray it just like dat broski! If u get a chance send me a shout out for distributor boot. And i do know its a small piece 💪😎
I’m sorry Jody.. Musta slipped my mind. I’ll be sure sure to get you squared away in an upcoming video 💪
Thanks brother! Ur a celebrity around my house. So, that would be pretty awesome!
would this dye work to change colors? for example i have grey and black interior but i want it all black. ford no longer makes these pieces and ebay parts are ridiculously expensive, lmk sir!!
Yeah it does I just painted my interior witch is red but I needed some plastic trim pieces a junk yard had a gray fox interior I painted it came out sweet! Most important thing is you have to clean very good and no humidity
Looking really good!!
Great video BREW2L & Andrew, Thank you!
The # 2 is its place! Comes right after chevy!!#1
What color is that ?
whats the spray mixed with?
At 11:35 what's in the box?!? LOL
What color is the gray
Smoke grey paint code??
Just plum sexy!!!! Andrew you remember what I said about those automatic cars!!!! Hahahahaha
When you shipping out his man card? I need to make sure he’s home to sign for it.
Hahaha
Looks great. I'll be doing this on the FHP soon!
I done a car panel it came off just as easy as Walmart paint scratch right off. 😢
Hey brew the car is really coming together man and it's great to see you and Andrew working together!! Working on hot rods can really bring family together! And want to give you👍👍👍👍👍👍👍 You always go into detail about everything. You seem to know a lot about a fox body
I wouldn’t trade it for anything brother!
Just started this on my svo and remembered your video. Great content and glad I didn’t use the adhesion promoter...Always felt like a waste to me.
Anybody try this, but went 2 tone with color? How did it come out?
Love your videos!
would you recommend adding a clear coat after putting the base coat?
I did on mine I used sem satin gloss clear coat it came out mint !
nice job as always
Why not use the adhesion promoter
It doesn’t dry good sometimes and then your left with a mess. Besides never needed it honestly.
Cool I can’t wait to do my interior over the winter just subbed I love your vids!
Looking good brother 🤜🤛
I cant get over this lol!
Pro trick : watch series at flixzone. Been using them for watching lots of of movies recently.
@Cash Colby Yea, I've been watching on Flixzone} for since november myself :D
@Cash Colby yea, have been watching on flixzone} for years myself :D
I know my next project!!
great work
Isn't SEM a paint and not a dye?
thank you for the video
$ Motivated. Good Luck Pimp
Damn looks good