I know this is an older video video but I've had a Behringer xenyx mixer for years and just found out about this product, it will be awesome to get another color for guitar tracks with the comparatively warmer sound it has compared to my basic interface. Now most importantly, nice choice on having some X play for this demo video, f**ckin righteous!
something that I want is you can compare the quality of uca202 and without it, you just record the audio waves both. so we can take a conclusion which better of them. thx
WHY IS NOBODY USING THIS THE OTHER WAY ROUND??? I want to know if I can record with this FROM my computer and not INTO my computer. Reason: my laptop doesn´t have a line level output option, but I want to record music from UA-cam or Spotify onto my tapedeck. DOES THIS DEVICE MAKE THAT POSSIBLE?!?
Can I convert digital to analogue? I would like to connect it to my pc with optical cable and convert sound for analogue recording, is it possible with this sound card? Thanks in advance.
Stupid question from someone with little audio-tech knowledge, if I use this to connect a small gaming-oriented MIDI module (3,5mm line output), can I just plug the module into this card with rca cable adapter and set it to listen in windows? I dont need any output, just the input. Line in on onboard audio is unsuprisingly noisy AF.
I want to use my rekordbox dj controller in ableton to add scratching to my music. Would this be a good audio interface for me? Or what would you recommend?
Is it possible? That thisparticular unit Behringer UFO202 U-PHONO Audio Turntable Interface work a basic regular record turntable with RCA Red & White Audio Cables by using with Audacity? Thanks.
I tried this interface with an amped turntable (which I know are underpowered, in general.) I found that, with my particular laptop - all experiences will be different - it did not receive enough power from USB to run properly. It constantly cut out, and when switching from phono to PC it would have to be powered off and back on (I have a Sabrent, powered USB hub) every single time. I switched to the Stellar Labs 555-30420 USB PHONO PREAMP (which is DC powered) and have not had a hitch since. This, as I said, is only my experience. If the Behringer works for you, wonderful. However, there are other fish in the sea if you find that it has power issues.
Hi! Are you still using this device today? I am eying for this device as my mobile interface. Would you still recommed it? I also have some questions: 1. Will it still produce output in RCA when headphone is connected? 2. Would a built-in pre-amp from an acoustic guitar be enough for input? 3. Can I use the left channel input for guitar and the right for a preamped mic? Nice video btw. =)
Mine records for about 10 or so seconds and then I can see on Audacity that the sound is dropping off. With the headphones I don't hear the sound drop. I think it is a defective unit or a windows 11 problem.
Hi, Can I get good quality vocal(songs) recordings if I pair this device with Behringer Xenyx 502 audio mixer?? If not u may suggest a budget mixer. I am using nuendo recording software.
Borderline noob here: On the amazon website it says that has digital mono output. Would that mean the same thing is coming out of both speakers? Say if in the DAW, certain things were panned or something like a ping-pong delay occurred. Would you be able to hear that?
Hi. Great video! I have a Yamaha keyboard with red and white composite outputs. Can I plug these into red/white input sockets of the Behringer and record onto computer using Audacity? I'm guessing yes, but never used one of these devices before so not certain.
hey man, great video!!I have a question regarding this interface. I have the exact one for a long time and it's usually connected to my laptop and a couple of krk speakers just to listen to some music. Not long ago I received a technics turntable and the issue I have is that, when I connect the turntable to it as well, I'm not able to control the volume. It doesn't work via the laptop or the interface, only from the back of the speakers..why??:)
inshectorgadget hi mate regarding about this same situation. I have my Technics turntables and a Numark mixer. I want to transfer my record my vinyls to a digital format. Do you know if I can record them with this device without controlling the volume from the back or it’s better to get a two input phono audio interface instead!?
Hi there, thanks for the video. I have UCA202 too and want to record my serato SL2 mixes onto my Macbook Pro.. Just so that I'm clear, I connect my RCA's from my mixer Booth Out to the Input on the UCA, then play in the USB and this will act as a line in to record..? One question, How do I still achieve sound via my amp as my booth out normally connects straight to my amp in...? Do I need to run a separate RCA from mixer Master Out to Amp in..? Apologies for simple questions - I'm new to this
@@MJZPro how do you connect 1/8 to RCA cable from headphone out of Behringer to the monitors ? I mean the cinches split is quite short, how do they reach both monitors ? Are using some kind of extension ? Maybe it's basic stuff but I can't figure it out :) !
Can you use this to output sound from the laptop going to a 5.1 home theater system using its optical connection? I'm watching movies on our hd tv through my laptop and an hdmi connection but I can't find any other way to connect the sound to my home theater system. Will this be the solution?
Hey, quick question. I noticed, well at least on the mac, that i cannot increase the input levels like i can with other devices. I find my recordings a bit low when the mixer that I have (soundbarrier my16U). It says it has mic preamps (did research and i guy mentioned the xlr inputs having mic preamps) and using the xlr did make it better but thing is, where I am, not much xlr cables and not too much channels on the mixer. What can I do to boost up signals through the TRS? Marks Line next to all ports but it is REALLY LOW x.x Thanks
Yes that's what I am using. The REC out rca. I have to almost max gain to get something decent. Using vocopro mics and they are near, foreclosed to max.I don't like maxing out e everything like that. No pro but to me i don't think it should be. If i use xlr, will be better cause I t think that's where the pre amp is but we have trs mostly
hello djco ! i wanna learn how how to dj but i dont have money to buy a controller. can the uca 202 help me play sound from my laptop and monitor another deck with headphones ? if not what do you recommend ? thanks alot (i usually connect the heaphone jack to the amplifier which is connected to the woofers and that doesnt allow me to monitor headphones)
Hi quick question. Can I connect two mics to it and then to my mac? Could you please help? I don't want to purchase it without genuine advice. I'd like to connect two separate mics and than to my mac
Would I be able to connect this to my Android Stylo 4 smartphone, maybe with an OTG ADAPTER, & basically use my smartphone as the computer, so I can try this Mixfader, Mixfader Prolink SoundCard set up with my Reloop Spin Portable Turntable, & my JBL Charge 4 speaker? Thanx man, great video bro..... 👍💪🙏🔥💯🎄😎🤔
What up, unfortunately I've never used an android phone, but I would imagine that it would work similar to the iOS devices. This is a very simple non-driver unit, so it might work...
Would this work for live streaming through OBS .... I have video etc set up but want the sound from my Controller going into laptop for streaming , or would i need a Audio interface
Great video! Could this also work with my Kaossilator Pro + into this UCA202 into PC (a DAW software - Propellerhead Reason, recording as external MIDI instrument audio)? I've been trying to sync it because i want some of the scratching/effects and beats that are on Kaossilator. Thanks in advance!
Just some info: Directly plugging the KP+ into PC (via the USB) makes Reason/Ableton recognise it as a MIDI controller. The KP+ has cinch output/input lines, MIDI output/input and 6.3 jack for headphones and one for mic. I tried to plug the cinch output KP+ into my PC (my PC has a separate 3.5 mm jack audio input) using a adapter, but the record quality was terrible. From what I understand, the PC audiocard is not suitable for recording analog audio, therefore it sounds horrible. A USB Soundcard should solve this, right?
What is the ouput from usb in the pc ? .wav ? I hope not .mp3 ? (I just buyed one for 22 euro new on ebay, i hope It 'll work on my old laptop and Audacity)
.wav is lossles, I know. But the input from the usb is digital or 1-0-0-1-0-...... But my old usb-turntable gives .wav in my laptop, explained by the manual ,or is this is false ? -Thnxs again .
okay, i bought a uc a 202 control audio interface so i can connect from my controller to pc, because ther is a high frequency sound that sound on my recording, after the interface, it still has the same noise, like a beep, anyone know how i fix that? my controller is the pioneer ddj sb2;.
*i bought the audio interface to connect to my pioneer Dj sb2 só I can record it on audacity, however the high frequency sound that it had before(like a beep)(and I thought it was because of the analog signal) kept on, why is that ? Is what I meant
So basically this is a better "sounding" solution than using the RCA to Mini Jack into your macbook pro? Also I allready have a Scarlet focus rite 2I2, and have been trying to use it to record my mixes..by going RCA from Mixer to quarter inch jack adapter into Focusrite single quart inch jack, hoping it would work..but I only get one channel in Audacity..is is becaue these units are basically made for Mics and insruments? Nice Video thanks in advance!
I see you're using serato dj or scratch live. I wanted to know if you're also able to record in scratch live or serato without going to audacity or other daws?
DJ Phil Gilmore I know about that I'm using turntables, mixer and a denon ds1 box. My mixer does not have a used port so I have to use another soundcard
@@TheQuietMan83 correct but the sound is not as clear nor loud. I have made many dj mixes and always wondered why they sound so low in my car when i play them back.
djco1music yeah but the problem is i live in the uae and it's hard to find ddj's that ship here, so I might have to buy the numark and im wondering if this audio interface would do the job
Great idea, that solves the problem of the recording output level.
I know this is an older video video but I've had a Behringer xenyx mixer for years and just found out about this product, it will be awesome to get another color for guitar tracks with the comparatively warmer sound it has compared to my basic interface. Now most importantly, nice choice on having some X play for this demo video, f**ckin righteous!
something that I want is you can compare the quality of uca202 and without it, you just record the audio waves both. so we can take a conclusion which better of them. thx
WHY IS NOBODY USING THIS THE OTHER WAY ROUND??? I want to know if I can record with this FROM my computer and not INTO my computer. Reason: my laptop doesn´t have a line level output option, but I want to record music from UA-cam or Spotify onto my tapedeck. DOES THIS DEVICE MAKE THAT POSSIBLE?!?
Can I convert digital to analogue? I would like to connect it to my pc with optical cable and convert sound for analogue recording, is it possible with this sound card? Thanks in advance.
I was looking for the latency test. like drumbeat/metronome to see if it exactly matches the one playing when you are recording some instruments..
I wanna use this soundcard for simple listening with my headphones. Is it really worth the money spent?
how is the bass? does it lose anything in the lower/upper frequencies during ad conversion?
Stupid question from someone with little audio-tech knowledge, if I use this to connect a small gaming-oriented MIDI module (3,5mm line output), can I just plug the module into this card with rca cable adapter and set it to listen in windows? I dont need any output, just the input. Line in on onboard audio is unsuprisingly noisy AF.
Can u do a video of how 2 wire this up 2 my decks and mixer pls
I want to use my rekordbox dj controller in ableton to add scratching to my music. Would this be a good audio interface for me? Or what would you recommend?
best video on this device. Thanks!
Is it possible? That thisparticular unit Behringer UFO202 U-PHONO Audio Turntable Interface work a basic regular record turntable with RCA Red & White Audio Cables by using with Audacity? Thanks.
Okay thanks for that great info @djco1music. Take Care, Phil
I tried this interface with an amped turntable (which I know are underpowered, in general.) I found that, with my particular laptop - all experiences will be different - it did not receive enough power from USB to run properly. It constantly cut out, and when switching from phono to PC it would have to be powered off and back on (I have a Sabrent, powered USB hub) every single time. I switched to the Stellar Labs 555-30420 USB PHONO PREAMP (which is DC powered) and have not had a hitch since. This, as I said, is only my experience. If the Behringer works for you, wonderful. However, there are other fish in the sea if you find that it has power issues.
are you using a usb 3.0 port? both 2.0 and 3.0 are 5v ports but 3.0 allows more current.
@@Ballacha 3.1 - it's an idiosyncratic issue, I guess.
Two week in with the Stellar Labs and still no problems.
Hi! Are you still using this device today? I am eying for this device as my mobile interface. Would you still recommed it?
I also have some questions:
1. Will it still produce output in RCA when headphone is connected?
2. Would a built-in pre-amp from an acoustic guitar be enough for input?
3. Can I use the left channel input for guitar and the right for a preamped mic?
Nice video btw. =)
Mine records for about 10 or so seconds and then I can see on Audacity that the sound is dropping off. With the headphones I don't hear the sound drop. I think it is a defective unit or a windows 11 problem.
Hi, Can I get good quality vocal(songs) recordings if I pair this device with Behringer Xenyx 502 audio mixer?? If not u may suggest a budget mixer. I am using nuendo recording software.
djco1music ,Okey, thnx...for replying.
can i use time code vinyl with this. for 2 turntables
How much better is this uca202 than an onboard computer soundcard in terms of recording sound quality?
This Behringer work in virtual dj? Thanks
Borderline noob here: On the amazon website it says that has digital mono output. Would that mean the same thing is coming out of both speakers? Say if in the DAW, certain things were panned or something like a ping-pong delay occurred. Would you be able to hear that?
hi can i use this to copy my cd collection from cd player into laptop too ? beside vinyl & tape ?
Hello! I want to talk to you about a collaboration! How do we proceed?
I got one and its great.
Hi. Great video! I have a Yamaha keyboard with red and white composite outputs. Can I plug these into red/white input sockets of the Behringer and record onto computer using Audacity? I'm guessing yes, but never used one of these devices before so not certain.
Cheers!
Thank you very much for the titurial
How to connect 5.1 surround speakers to this sound card?
hey man, great video!!I have a question regarding this interface.
I have the exact one for a long time and it's usually connected to my laptop and a couple of krk speakers just to listen to some music.
Not long ago I received a technics turntable and the issue I have is that, when I connect the turntable to it as well, I'm not able to control the volume.
It doesn't work via the laptop or the interface, only from the back of the speakers..why??:)
inshectorgadget hi mate regarding about this same situation. I have my Technics turntables and a Numark mixer. I want to transfer my record my vinyls to a digital format. Do you know if I can record them with this device without controlling the volume from the back or it’s better to get a two input phono audio interface instead!?
as an audio interface should is use it on ableton as an asio driver? or wav output or dx im confused I use ableton
Which one is better ? This Behringer UFO202 audio interface USB or this Behringer UCA222 USB interface ?
I think it's more on preference.
Hi there, thanks for the video. I have UCA202 too and want to record my serato SL2 mixes onto my Macbook Pro.. Just so that I'm clear, I connect my RCA's from my mixer Booth Out to the Input on the UCA, then play in the USB and this will act as a line in to record..? One question, How do I still achieve sound via my amp as my booth out normally connects straight to my amp in...? Do I need to run a separate RCA from mixer Master Out to Amp in..?
Apologies for simple questions - I'm new to this
@@MJZPro how do you connect 1/8 to RCA cable from headphone out of Behringer to the monitors ?
I mean the cinches split is quite short, how do they reach both monitors ? Are using some kind of extension ? Maybe it's basic stuff but I can't figure it out :) !
Can I connect a cassette player? Thanks☺️
Yes, but I'm not finding a good Win 8+ driver.
Can you use this to output sound from the laptop going to a 5.1 home theater system using its optical connection? I'm watching movies on our hd tv through my laptop and an hdmi connection but I can't find any other way to connect the sound to my home theater system. Will this be the solution?
Thanks for the info! I already purchase one from ebay. I hope it works as expected or else I'll end up looking for buyers
Hey, quick question. I noticed, well at least on the mac, that i cannot increase the input levels like i can with other devices. I find my recordings a bit low when the mixer that I have (soundbarrier my16U). It says it has mic preamps (did research and i guy mentioned the xlr inputs having mic preamps) and using the xlr did make it better but thing is, where I am, not much xlr cables and not too much channels on the mixer. What can I do to boost up signals through the TRS? Marks Line next to all ports but it is REALLY LOW x.x
Thanks
Yes that's what I am using. The REC out rca. I have to almost max gain to get something decent. Using vocopro mics and they are near, foreclosed to max.I don't like maxing out e everything like that. No pro but to me i don't think it should be. If i use xlr, will be better cause I t think that's where the pre amp is but we have trs mostly
Sorry, but what kind of cable do I need to connect my jbl lsr 305s like you did for your Krk rokit 5s?
djco1music thanks!
hello djco ! i wanna learn how how to dj but i dont have money to buy a controller. can the uca 202 help me play sound from my laptop and monitor another deck with headphones ? if not what do you recommend ? thanks alot (i usually connect the heaphone jack to the amplifier which is connected to the woofers and that doesnt allow me to monitor headphones)
Can i use it as my PC's default soundcard or does it only work with selected softwares like ableton?
Hi quick question. Can I connect two mics to it and then to my mac? Could you please help? I don't want to purchase it without genuine advice. I'd like to connect two separate mics and than to my mac
thank you so much. I'm thinking about purchasing U-Phoria UM2 instead
Would using this with an xm8500 to stream work?
Can I use any microphone
Would I be able to connect this to my Android Stylo 4 smartphone, maybe with an OTG ADAPTER, & basically use my smartphone as the computer, so I can try this Mixfader, Mixfader Prolink SoundCard set up with my Reloop Spin Portable Turntable, & my JBL Charge 4 speaker? Thanx man, great video bro..... 👍💪🙏🔥💯🎄😎🤔
What up, unfortunately I've never used an android phone, but I would imagine that it would work similar to the iOS devices. This is a very simple non-driver unit, so it might work...
Okay cool, much appreciated, thanx a bunch my friend..... 🔥💯👍🙏😎
Hi, thanks for the great review. do you know what is the max smaple rate of this card and the bit rate? and where is the Behringer UCA202 is made?
10x
Can you give me some info about the latency?
Would this work for live streaming through OBS .... I have video etc set up but want the sound from my Controller going into laptop for streaming , or would i need a Audio interface
im currently running out of my booth into my ipad with a ttrs micro adapter (rode sc4 ) and the quality is good but sounds really flat with no bass
Big Thanks!!!!
Great video!
Could this also work with my Kaossilator Pro + into this UCA202 into PC (a DAW software - Propellerhead Reason, recording as external MIDI instrument audio)? I've been trying to sync it because i want some of the scratching/effects and beats that are on Kaossilator.
Thanks in advance!
Just some info: Directly plugging the KP+ into PC (via the USB) makes Reason/Ableton recognise it as a MIDI controller. The KP+ has cinch output/input lines, MIDI output/input and 6.3 jack for headphones and one for mic. I tried to plug the cinch output KP+ into my PC (my PC has a separate 3.5 mm jack audio input) using a adapter, but the record quality was terrible. From what I understand, the PC audiocard is not suitable for recording analog audio, therefore it sounds horrible. A USB Soundcard should solve this, right?
Is this good enough as a audio interface for voice over, podcast, etc?
can i use this to connect my instruments to my pc?
Good video thumbs up.. and also have you tried it setting up on traktor for headphone previewing and main outs
You can use the PC to send out the Cue signal, then the interface to send audio to speakers separately.
What is the ouput from usb in the pc ? .wav ? I hope not .mp3 ? (I just buyed one for 22 euro new on ebay, i hope It 'll work on my old laptop and Audacity)
.wav is lossles, I know. But the input from the usb is digital or 1-0-0-1-0-...... But my old usb-turntable gives .wav in my laptop, explained by the manual ,or is this is false ? -Thnxs again .
Can I connect my xlr microphone to this sound card with xlr to 3.5 mm jack converter?
djco1music Thanks for the suggestion, but I think that I'll prefer behringer um2, umc202 is a bit overpriced me
Should it has to be +48v? I'm gonna use with bm 800. For bm800 can I use behringer pp4400 too? It has +12v preamp
so you connect the headphone output to the line in of your amp or you have active speakers and connect directly to them?
thanks a lot. and something more, can you use it simply as an external sound card?
can you record multiple instruments on different channels with this?please reply..thabk you
what if i use a mixer and plug it in input? is it compatible?
djco1music nice...thank you bro
What is the price?
i got it for $18
the scratching man 👌
Can this be used as a pre-amp for vinyl transfers ?
No, you should use the 222 and not the 202, research it.
Does the audio goes into the pc via Usb?
Yes correct. The Mac or Windows machine will read it as a USB component.
@@MJZPro thanks a lot sir
okay, i bought a uc a 202 control audio interface so i can connect from my controller to pc, because ther is a high frequency sound that sound on my recording, after the interface, it still has the same noise, like a beep, anyone know how i fix that? my controller is the pioneer ddj sb2;.
*i bought the audio interface to connect to my pioneer Dj sb2 só I can record it on audacity, however the high frequency sound that it had before(like a beep)(and I thought it was because of the analog signal) kept on, why is that ?
Is what I meant
djco1music but I’ll try that
You familiar with the mixars duo?
i just got them thinking the numark v7's were compatible with them... but nope there not.do you know any tricks around them?
Well done. Real heads make great videos. #studio life
So basically this is a better "sounding" solution than using the RCA to Mini Jack into your macbook pro? Also I allready have a Scarlet focus rite 2I2, and have been trying to use it to record my mixes..by going RCA from Mixer to quarter inch jack adapter into Focusrite single quart inch jack, hoping it would work..but I only get one channel in Audacity..is is becaue these units are basically made for Mics and insruments? Nice Video thanks in advance!
djco1music Thanks I appreciate it
Does it support asio?
can i record or play my electric guitar with that?
Not really, it'd be best to go into a mixer then into this unit
I see you're using serato dj or scratch live. I wanted to know if you're also able to record in scratch live or serato without going to audacity or other daws?
I was hoping so because I use a denon ds1 box where you can't record internally.
Serato has a REC option that records straight to your laptop ... Its only with the full version though, serato intro hasnt got the option
DJ Phil Gilmore I know about that I'm using turntables, mixer and a denon ds1 box. My mixer does not have a used port so I have to use another soundcard
@@TheQuietMan83 correct but the sound is not as clear nor loud. I have made many dj mixes and always wondered why they sound so low in my car when i play them back.
How could i connect to mine AV Amplifier
You probably need an RCA to 1/4 adaptor, but I'd need details to provide more feedback.
Can you use it on Audacity?
Absolutely
Hey.. can I use it for simple home recording purpose.. something like guitar and bass recording?
Can I use with virtual dj
djco1music how many inputs do I need
Does this work on windows 7??
Yes, this works with Windows 7, no specific driver is required.
can you connect your headphone to this ?
yes, definitely.
Very good video btw.
nice tutorial!!!
They're nearly $100 now.
You can buy the same one with only 30 bucks on guitar center or sweetwater
Is that have latecy?
djco1music can asioforall work on it? To reduce the latency?
Bless for the info bruv
Stupid advice at the start!!!
The phonejack is the weakpoint of the device!
There several mods for the phonejack out there.
Windows 10 doesn't recognize it.
It sure does, how are you trying to use it? With a DAW?
Im looking to buy my first controller( most likely numark mixtrack 3) but it doesn't have an audio interface, would this be good enough?
djco1music yeah but the problem is i live in the uae and it's hard to find ddj's that ship here, so I might have to buy the numark and im wondering if this audio interface would do the job