This is the most detailed video of path memorizing bot over youtube. Thanks TEG!!!!! When can we expect a face reveal..... Fans really want to see who is behind TEG and its success!!!!
Thank you friend for your video and your code ,helped me a lot I searched for the way to make this project for a while , but with all the imperfection in motors and so , it's difficult to repeat précisely the desired path ,
At 15:16 instead of pressing ir remote button to run the copied path in eeprom when it is power on . Is there any other way to run the copied path as soon as it is powered on without pressing any button from ir remote? Please reply it's very urgent and very important for me😅
Great explanation! My movements are working perfectly when I used the Remote Control IR code. However, when I uploaded the path memorizing code, the forwards and backwards don't work(only one wheel rotates). Any idea why?
This will not work if you move the vehicle to a new position. It will still follow the old path that is in it s memory. How about using a high precision GPS module
Great work dude. Hard to find these type of authentic work on this platform these days. Can you please tell me that how much the total project will cost?
@@THEELECTRONICGUY Well in the video when you show a top view of the car the wiring looks different then on the circuit diagram, also the HEX codes my IR remote gives are 7 to 8 characters long and not always consistent in bringing out the same code. How can I fix this.
Your explainantion is amazing.. You must explain with you being infront of the camera.. In that way, it will create audience retention. Keep up the good work
OK, Silly me! Solved the voltage problem!!!, But still experiencing the need to push the stop button numerous times. Also with the left and right turn, can only be made when car is stationary, is it possible to operate it as a continuous movement, that is, going forward turn left, continuing in a forward motion then turning left etc, or does it have to be in steps? Thanks G
@@THEELECTRONICGUY thanks, still wondering about continuous operation! That is going forward and turning left and right without stopping? Cheers and merry Christmas
@@georgeb9256 just to be clear, you mean: “While bot is moving forward, if left button is pressed, it will rotate to left(suppose 45 degree, depends on the delay). Now without any button pressed the bot should keep moving in this 45 degree direction” Right?
@@THEELECTRONICGUY thanks for response and hope you had an enjoyable Christmas! And, no, I mean whilst button is pressed say, it turns left, when button released carries on straight then when other button pressed and held, turns to the right until button is released then continues on, all without stopping! Cheers G
Bro we tried it but the code is not working properly And we are adding time lag to the every action in a single attempt only one particular motion is working and which is not chenging its direction even it will not stop also it is just move in a single direction while we are trying for different directions.
plz reply Bhai ye btaiye ki electrical aur Machatronics engineering difference kya hum machatronics engineering krne ki soch rhe abhi hm 10th me hai plz bhi aap humko thoda guide krdijiye jaise ki engineering me sabse zada important kya hkta hai physics, chemistry and maths waise inme se sabse zada easy aur mera favourite maths bs thoda algebra difficult lgta hai lekin hum usko bhi theek krle gen hai aur phir physics 🤩♥️ phir chemistry Bhai plz es question ka reply zaroor dijiye ga electrical aur Machatronics me Computer subject lgta hai KYA jaise humko computer me zada kuch bhi nhi ata kyo ki mere school me Computer subject itna ache se nhi pdhate the blki hum ko interest hi nhi tha bhot darr lgti thi computer se long long answers lekin ab humko programming me interest bhot zada ho rha hai aur hum Arduino ki programming seekh rhe hai aur python start krne ki soch rhe
Excellent video! finally managed to get mine to operate but having spasmodic operation of the "STYOP" button! any suggestions? Also, once disconnected to the computer there is no power to the UNO. where does the power come from for the board thanks G
Want to learn electronics the fun way?
Checkout my course: bit.ly/3E4qKt0 👈
Use discount code - ⭐ET20⭐ and get upto 20% off!👈
This is the most detailed video of path memorizing bot over youtube. Thanks TEG!!!!! When can we expect a face reveal..... Fans really want to see who is behind TEG and its success!!!!
This is a truly amazing underrated video. The idea of storing path details is insane. I will incorporate it in my own bot.
Glad you enjoyed it!
can we add two path ? a to b and b to c and back to a ?
i recommend using a motor shield instead of an l293d ic if possible
why?
@@tusheyy6033 less wires involved, easier to code
Great work
But can we teach to memorize more path
Hi Deepu, what do you mean by more path?
Can you do this for the robot to memorize its way around a specific building?
Hey Great work BTW what can be the maximum size of the array of movements??
Thank you friend for your video and your code ,helped me a lot I searched for the way to make this project for a while , but with all the imperfection in motors and so , it's difficult to repeat précisely the desired path ,
Use rotary encoders that directly attach with the motors and add a feed back system
At 15:16 instead of pressing ir remote button to run the copied path in eeprom when it is power on . Is there any other way to run the copied path as soon as it is powered on without pressing any button from ir remote?
Please reply it's very urgent and very important for me😅
Great explanation! My movements are working perfectly when I used the Remote Control IR code. However, when I uploaded the path memorizing code, the forwards and backwards don't work(only one wheel rotates). Any idea why?
This will not work if you move the vehicle to a new position. It will still follow the old path that is in it s memory.
How about using a high precision GPS module
You have to delete the last stored path first by pressing the del button
Great work dude. Hard to find these type of authentic work on this platform these days. Can you please tell me that how much the total project will cost?
Hey, thanks for the compliment man!
Approx. Cost: 1000 or $13
But you can cut this cost to half by using a nano or mini
Hello how can i connect the motor driver l298n with this setup
Hi, I noticed that the circuit diagram in tykner cad is different from the one in the video could you please make one the same as the one in the video
Hi, It's the same as far as I remember. What's odd in the give circuit diagram?
@@THEELECTRONICGUY Well in the video when you show a top view of the car the wiring looks different then on the circuit diagram, also the HEX codes my IR remote gives are 7 to 8 characters long and not always consistent in bringing out the same code. How can I fix this.
@@Poncki Are you using the proper delay? And check for the wiring. Maybe IR is not inserted properly thus giving random values
Awesome project , Do u have GPS based navigation robot codes
Hey man You got a new Subscriber
Your explainantion is amazing.. You must explain with you being infront of the camera.. In that way, it will create audience retention. Keep up the good work
Thankyou for the valuable suggestion☺️
How to change it to Bluetooth controlled car
I mean you controlled with ir remote without using that
How to use Bluetooth module hc 06
I cannot see your course on graphy, it just goes to the main website page- can you please supply a new link?
This is good stuff!! God bless
can we use full-bread board instead of mini
is the schematic correct because, the enable 3/4 pin should also be connected to vcc
in the video you also used several capacitors but in schematic they are not present.
Very good
OK, Silly me! Solved the voltage problem!!!, But still experiencing the need to push the stop button numerous times. Also with the left and right turn, can only be made when car is stationary, is it possible to operate it as a continuous movement, that is, going forward turn left, continuing in a forward motion then turning left etc, or does it have to be in steps? Thanks G
Hi George, sorry for such a late response. Is your issue resolved now?
@@THEELECTRONICGUY thanks, still wondering about continuous operation! That is going forward and turning left and right without stopping?
Cheers and merry Christmas
@@georgeb9256 just to be clear, you mean:
“While bot is moving forward, if left button is pressed, it will rotate to left(suppose 45 degree, depends on the delay). Now without any button pressed the bot should keep moving in this 45 degree direction”
Right?
@@THEELECTRONICGUY thanks for response and hope you had an enjoyable Christmas!
And, no, I mean whilst button is pressed say, it turns left, when button released carries on straight then when other button pressed and held, turns to the right until button is released then continues on, all without stopping!
Cheers
G
Great work. Can I use GUI I set on my computer to control instead of Remote?
Yes if you have like a arduino with wifi like a r4
Bro we tried it but the code is not working properly
And we are adding time lag to the every action in a single attempt only one particular motion is working and which is not chenging its direction even it will not stop also it is just move in a single direction while we are trying for different directions.
plz reply
Bhai ye btaiye ki electrical aur Machatronics engineering difference kya hum machatronics engineering krne ki soch rhe abhi hm 10th me hai plz bhi aap humko thoda guide krdijiye jaise ki engineering me sabse zada important kya hkta hai physics, chemistry and maths waise inme se sabse zada easy aur mera favourite maths bs thoda algebra difficult lgta hai lekin hum usko bhi theek krle gen hai aur phir physics 🤩♥️ phir chemistry
Bhai plz es question ka reply zaroor dijiye ga electrical aur Machatronics me Computer subject lgta hai KYA
jaise humko computer me zada kuch bhi nhi ata kyo ki mere school me Computer subject itna ache se nhi pdhate the blki hum ko interest hi nhi tha bhot darr lgti thi computer se long long answers lekin ab humko programming me interest bhot zada ho rha hai aur hum Arduino ki programming seekh rhe hai aur python start krne ki soch rhe
Hey Zoha, I am also in 10th class. I have the same question. Plz TEG bro, give us some explanation and guidance!!!
To thik hai fir agle video me pocha jaye ga ok😀
Will this work for a bigger chassis if I use a stronger motor and bigger wheels ?
Yes. Speed should be slow
How can I make this Bluetooth controlled instead of ir . Please reply 🙏
How to make this all work using Bluetooth Module or just joystick
Same principel so the joystick need a IR transmitter like the Remote controll and send diffrent hex values based about the joystick moment
Sir
my remote is giving me different numbers each time.please guide.
Random Hex codes or some gibberish?
How many array paths can be saved
How can we make the same path memorizing robot with Bluetooth module it's very important and urgent...
plzzzz reply and tell how can we make it !!!
Hey abdullah! Have you done the path memorization using bluetooth?
@@ruchi9898 yes I have done it
@@abdullahzakir4065 hey bro can i email you or something i need some help with this
@@abdullahzakir4065 can you please provide me the source code for better understanding😊
It's easy
Just replace/use and operations with Bluetooth module
Great video
Can we add two path
Can you send this program with four motors
Bro How can I able to build such projects I mean what courses are best in order to take in Btech?.. Please help me brother
Bro tell me something about Electronic engineering plzz
Can we use L298 motor driver module instead ??
Yes you can
13:13 Path memorizing permanente
why -1 int fwd_Counter = -1;?
Excellent video! finally managed to get mine to operate but having spasmodic operation of the "STYOP" button! any suggestions?
Also, once disconnected to the computer there is no power to the UNO. where does the power come from for the board
thanks
G
Are you from gbpec ??
Yes
Nice
How can I contact you?
THANKS HE MUCH
Please add gps in this robot so, I can give targets location to robot through mobile. Please make this video
i want use L293D module to run four motors plz tell me changes i need to do in the codes . will humbly for your kind reply
Buen vídeo
Boliye bhi
Well bro…..
Bro i want the same model can u share ur contact
Nice