Thanks, at the track my friends n I always say Tires,tires,tires. It's so important. Past weekend I set my first TQ in 2wd SC. And it felt good having other driver stopping in my pits asking what tires I was running.
Jason, Ryan Lutz and I talked for a good 20+ mins at my local track on what tires to run on a muddy surface when outdoor races and mother nature don't get along. He said to always watch the tires on the cars before you coming off the track. If a large pin tire is caking up with mud then you need to go to a smaller pin tire. If a very small pin tire ( like ions ) are coming off the track clean then a slightly larger pin ( hole shot ) should be your best friend. But like you said there is no science to selecting the best one, that's what makes racing fun, am I right?? Great video! I think you did a great job explaining one of the hardest topics in RC racing in under 5 minutes. Keep them coming!!!!! - Ryan
This is great advice. Our track is often muddy in the spring after the snow melts, and people started going to bigger. meatier treads, but small pins that don't cake up are the ticket. Something I found was very counter intuitive.
Wouldn't mind a updated one and maybe like indoor clay track and try a few different clay tires from different companys and see laptimes and tire wear and maybe do the same thing for outdoor.
Great video, as always. Very helpful rules of thumb for tyres. Would be great to have more like these, so as to have general guidelines or principles for deciding how to approach set-ups. For instance, things such as springs/ toe/ camber and so-on. Something that has always baffled me is the range of positions available for locating the ballstuds for the tie rods. eg on the rear hubs or on front camber blocks. Or the various positions on a shock tower for mounting shocks on. General guidance on how a car's behaviour changes by moving in/out or back/ forward would be great. Anyhow, keep up the great work. Love watching the videos.
Thanks for the good stuff Jason.Got a related request - how about some comparisons of inserts to go along with this tire comparison? And also, maybe brooding (just a bit of the best) on to both tires and inserts for old school the looser dirt tracks? I know there's got to be a lot of backyard tracks (like mine) that are more dirt, less clay.
I run AKA City Block for broke up outdoor track with rough condition but still works on smoother tracks. For smooth nice tracks AKA Grid Irons rock. My local track can get pretty rough after a hard rain so I absolutely love my City Blocks. AKA in my opinion is the leading developer and manufacturer of rc tires. Prolines seem nice at the track, run by other guys. But the top 5 guys almost always run AKAs.
years ago In the summer we raced indoors on a fairly high grip dirt track 1/10 scale Losi 4wd buggy and 2wd buggy.. I would Glue new tires and rims up.. And after they dryed i would take my buggy out side and do figure 8's for about 2mins to scuff the tires up and then clean them and prep them and let them sit till race time.. I had very good luck doing that.. Idk about it
Thanks for the video!! I run the stunners at my track in my backyard. Loomy with hard pack underneath. They work the best by far so far. I would like to try blockades though.
Tires confuse the heck out of me. Especially at Rick's in Staunton, VA. The track is a smooth concrete / steel. Very simple oval. I feel like I should be running the softest compound possible, but the veterans all run hard tires and manage a ton of grip.
hey quick ? i know this is an old video but who makes a high grip lug tire for outdoor old school racing i race in an outdoor club are track is loose dirt most run a pin tire but after experiminting with some cheap ebay rally tires (cutting and glueing ) id like some pre made option and well seems the world of tiers have went road aka clay surface this is somthing bashers would find usfull as well ty love the channel
Great video very informative, and for me being a newbie to this Hobby I'm have a tough time time trying to find and pick a slick tiers for my Traxxas Ford GT 1/10 scale mounted. And what size how do I judge? Do I need a wider tier on the rear? So could you please send me some cause I don't know how to size none of them Thanks.
I run pro2 sct outdoor. Most tracks I race at are hard packed with dust and often have rutts. What aka tires would you recommend to use in these conditions?
I drive mainly on pavement with a bit of loose dirt. Sometimes concrete and gravel though too. What is recommended for me? I have my eyes on ProLine Gladiator. Any suggestions?
hey quick ? i know this is an old video but who makes a high grip lug tire for outdoor old school racing i race in an outdoor club are track is loose dirt most run a pin tire but after experiminting with some cheap ebay rally tires (cutting and glueing ) id like some pre made option and well seems the world of tiers have went road aka clay surface this is somthing bashers would find usfull as well ty love the channle
restore or build and this may be a day late and a dollar short friend but for rough outdoor old school tracks I highly recommend AKA City Blocks in super soft compound.
I have a problem , I am racing my nationals in a few weeks on a track that is oil based with a high groove and grip level no dust , do you have any suggestions ?
I have rubber spike-tires on my vintage grasshopper 2 (not for racing, just bashing), has anyone else ever used that kind of tire and can tell me if they have more traction than offroad tires with a real tread or not? Edit: They're just rubber tires, without foam inserts and the rubber is pretty hard
![How To: Go Faster with Foams and Wheels. R/C Car Tire [Advanced Tutorial with Ryan Lutz of LutzRC]](http://i.ytimg.com/vi/TM9kUWfcKhA/mqdefault.jpg)
Thanks, at the track my friends n I always say Tires,tires,tires. It's so important. Past weekend I set my first TQ in 2wd SC. And it felt good having other driver stopping in my pits asking what tires I was running.
Just got into buggy racing and your Channel is a huge help!
Jason, Ryan Lutz and I talked for a good 20+ mins at my local track on what tires to run on a muddy surface when outdoor races and mother nature don't get along. He said to always watch the tires on the cars before you coming off the track. If a large pin tire is caking up with mud then you need to go to a smaller pin tire. If a very small pin tire ( like ions ) are coming off the track clean then a slightly larger pin ( hole shot ) should be your best friend. But like you said there is no science to selecting the best one, that's what makes racing fun, am I right?? Great video! I think you did a great job explaining one of the hardest topics in RC racing in under 5 minutes. Keep them coming!!!!! - Ryan
This is great advice. Our track is often muddy in the spring after the snow melts, and people started going to bigger. meatier treads, but small pins that don't cake up are the ticket. Something I found was very counter intuitive.
Wouldn't mind a updated one and maybe like indoor clay track and try a few different clay tires from different companys and see laptimes and tire wear and maybe do the same thing for outdoor.
What a great video! Thank you for taking the time! This will help a ton!
No problem Jessica. Hope this helps everyone out.
Great video, as always. Very helpful rules of thumb for tyres.
Would be great to have more like these, so as to have general guidelines or principles for deciding how to approach set-ups.
For instance, things such as springs/ toe/ camber and so-on.
Something that has always baffled me is the range of positions available for locating the ballstuds for the tie rods. eg on the rear hubs or on front camber blocks. Or the various positions on a shock tower for mounting shocks on.
General guidance on how a car's behaviour changes by moving in/out or back/ forward would be great.
Anyhow, keep up the great work. Love watching the videos.
Good Tips .. I am just starting to get into RC ing 5 Mo. Now I like to learn Thanks for posting
Thanks for the good stuff Jason.Got a related request - how about some comparisons of inserts to go along with this tire comparison? And also, maybe brooding (just a bit of the best) on to both tires and inserts for old school the looser dirt tracks? I know there's got to be a lot of backyard tracks (like mine) that are more dirt, less clay.
Your videos are top tier.
A video that makes sense where others struggle to communicate
Great vid! Really helpful since I’m just getting into short course with my arrma senton!
Thanks, great advice!
Great Info Jason!
I run AKA City Block for broke up outdoor track with rough condition but still works on smoother tracks. For smooth nice tracks AKA Grid Irons rock. My local track can get pretty rough after a hard rain so I absolutely love my City Blocks. AKA in my opinion is the leading developer and manufacturer of rc tires. Prolines seem nice at the track, run by other guys. But the top 5 guys almost always run AKAs.
Thanks a bunch for the info!!! Your videos are a tremendous help to me, and many other people I'm sure :-)
Great video like always...
Hey Jason! Could you do an update of this video using RawSpeed tires? Thanks
Cool directions, i hear waht i expected to hear. The rc tyres works exactly like the 1/1 car tyres, and it's natural to work like this.
Alabama Clay!! Super Soft is what all the fast guys run! Inside!
years ago In the summer we raced indoors on a fairly high grip dirt track 1/10 scale Losi 4wd buggy and 2wd buggy.. I would Glue new tires and rims up.. And after they dryed i would take my buggy out side and do figure 8's for about 2mins to scuff the tires up and then clean them and prep them and let them sit till race time.. I had very good luck doing that.. Idk about it
Thanks this video actually helps a lot! 🙌🏼
Thanks for the video!! I run the stunners at my track in my backyard. Loomy with hard pack underneath. They work the best by far so far. I would like to try blockades though.
Overally I like the Stunners when i run out door with any loam! More of a feel thing than anything else.
Yeah I'm loving them so far and I have tried a lot of different tires.
Tires confuse the heck out of me. Especially at Rick's in Staunton, VA. The track is a smooth concrete / steel. Very simple oval. I feel like I should be running the softest compound possible, but the veterans all run hard tires and manage a ton of grip.
Thanks for sharing!
hey quick ? i know this is an old video but who makes a high grip lug tire for outdoor old school racing i race in an outdoor club are track is loose dirt most run a pin tire but after experiminting with some cheap ebay rally tires (cutting and glueing ) id like some pre made option and well seems the world of tiers have went road aka clay surface this is somthing bashers would find usfull as well ty love the channel
Nice pointers
Great video very informative, and for me being a newbie to this Hobby I'm have a tough time time trying to find and pick a slick tiers for my Traxxas Ford GT 1/10 scale mounted. And what size how do I judge? Do I need a wider tier on the rear? So could you please send me some cause I don't know how to size none of them
Thanks.
good to know since I got a rc10b6d for my birthday and figuring out tires was a little pain. I fly rc and I wanted to get a good car
thank you buddy for the info!
Good info thanks !!!!
Were Electrons around yet when this vid was published?
Thanks for the tips
A buddy is getting a track outside clay not been ran on so your saying m4 clay right?
I run pro2 sct outdoor. Most tracks I race at are hard packed with dust and often have rutts. What aka tires would you recommend to use in these conditions?
I drive mainly on pavement with a bit of loose dirt. Sometimes concrete and gravel though too. What is recommended for me? I have my eyes on ProLine Gladiator. Any suggestions?
So what would you recommend for an indoor track that runs a carpet track?
I’m looking for tires that are good for asphalt AND grass any ideas?
If only these videos were updated as fast as RC products come and go; Stunner = discontinued?
hey quick ? i know this is an old video but who makes a high grip lug tire for outdoor old school racing i race in an outdoor club are track is loose dirt most run a pin tire but after experiminting with some cheap ebay rally tires (cutting and glueing ) id like some pre made option and well seems the world of tiers have went road aka clay surface this is somthing bashers would find usfull as well ty love the channle
restore or build and this may be a day late and a dollar short friend but for rough outdoor old school tracks I highly recommend AKA City Blocks in super soft compound.
I have a problem , I am racing my nationals in a few weeks on a track that is oil based with a high groove and grip level no dust , do you have any suggestions ?
what's a good asphalt tire?
thanks for the video homie
💯👍
2:23 did he just eat air?
123 456 he swallows a lot lmao
that air was tasty as hell :)
hahahahaha
2:21 not 2:23
Got the Bowfighters for my Slash. Too bad they dont make straight up crimefighters for shortcourse.
what would you recommend for running in Camarillo? (I also live in CA)
thanks!
I have rubber spike-tires on my vintage grasshopper 2 (not for racing, just bashing), has anyone else ever used that kind of tire and can tell me if they have more traction than offroad tires with a real tread or not?
Edit: They're just rubber tires, without foam inserts and the rubber is pretty hard
our club use a super soft blockaid in the summer time out side 60-85 F on a ruff lose very loomy track
I was so confused when he said loam
Ok, it’s not art.