Just like so many other disappointing videos, there is audio but nobody is speaking to explain what is going on. No description of the chemicals and proportions, or recommendations of the proper application methods. It was interesting but mostly useless. Also, is the amount of time required worth the result? New rims are not that expensive.
I just had a few sets of 15" rims sandblasted. They were very rough. $20 each. A few rattle cans of turbo Rustolieum and they look good. Will the paint hold up? I have NO idea.
I have resprayed my wheels but I done them while they were still on the van,I used two coats of primer and rub down and cleaned off before two coats of hih gloss sil very and two coats of lacquer,
Heard of brush plating. This would had been great in the '60's & 70's as our poor man's mag was a chrome plated factory rim. Will this hold to the elements?
(So called “chrome finish” paint is mainly intended for indoor diy use like mirror frames, picture frames etc, - It’s not as durable as silver car paint / enamel paint plus clear coat etc.)
@ Always best to try your paint choices on a sample piece first. Some paints can dissolve other types. It’s always best to buy primer/base coat/ clear coat that says what it “can be used with” - before risking it on your completed bodywork and then ruining the paintwork right at the end…
@@LowMileageChannel I've heard that the way you've done it is particularly difficult, based on the measurements of the fluids involved and the time they have to work - and the time to rinse th solution. Beautiful work, btw!
Audio would have been great, so you could have stated what you were doing and using otherwise I just assume you either sent it off to be chromed or bought a new one.
But what price do you put on R&D? What is the value as a proof of concept? What price do you put on learning, developing, practicing, and mastering a skill?
There's no way with big flakey rust that it started with, that it came out that smooth before the putty! I've cleaned wheels with way less rust that had DEEP pits 🙄
Das 4 mal mit der Arbeitszeit die da drin steck bekommt man auch schon neue Felgen. Ob das spachteln so gut ist? Wird das ganze dann nicht noch mehr Unwuchter. Wie lange die Spachtel Masse hält ist dann auch fraglich bei den ständigen Belastungen.
What a load of negativity, bear in mind that not everyone is an automotive genius like most everyone on here, someone, somewhere will have learned a bit here.
Why not just place the wheel in a vat of Evap-o-rust? I've removed rust from many items using it; the stuff works like magic in releasing the rust from the metal without affecting the core material. And it can be filtered/separated for reuse over and over. It has zero toxicity and is pH neutral.
But that is what he loves doing, so it is not a waste of anything to him. All that matters is how HE feels after he did it. What any of us think on the negative side does not matter.
No, it wouldn't. Painted wheels last 10 - 15 years, depending on conditions of driving. If you have too much money, better gold-plate them, while you are at it
Just like so many other disappointing videos, there is audio but nobody is speaking to explain what is going on. No description of the chemicals and proportions, or recommendations of the proper application methods. It was interesting but mostly useless. Also, is the amount of time required worth the result? New rims are not that expensive.
You are a tit if you don’t know why this is 😂
Yes like a bikini. What it reveals is very interesting but what it conceals is vital.
I’m glad. Too much mouth running on UA-cam. Just enjoy the art and let that be that.
Shut up you moronic numskull
It's not a tutorial video, much better original soundtrack than some club music.
I just had a few sets of 15" rims sandblasted. They were very rough. $20 each. A few rattle cans of turbo Rustolieum and they look good. Will the paint hold up? I have NO idea.
Durability? It looks great, but will it hold up?
Long enough to hang on the wall in the garage.
Give it a month the rust will slowly reappear ,, he never gt rid of all the Rust completely it will come back soon enough
I would've thought chrome plating bath would've been the steps involved in this process. Never heard of hydrochroming before. Looks neat.
this process can chrome wood materials as well.
I wanna try it out with customizing hot wheels cars now
Search for mirror silvering, that is all this is.
@@abpsd73 yes similar
To much work
Freaking AMAZING job!!!! Looks great!!!!
It would have been nice to know what process you did to get the chrome to shine like that
Thanks for the man or woman who invented sand blasting, you would not never clean that rust any other way. Great result and very good video!
its possible to clean in other ways, but sandblaster is more faster.
Phenomenal! I could not follow you and don't understand anything you did.
what a wonderful work 😍😍💖💖
Amazing. Appreciate the amount of effort you had gone through to demonstrate this option. Its not easy. Simply put.
Looks good.
I have resprayed my wheels but I done them while they were still on the van,I used two coats of primer and rub down and cleaned off before two coats of hih gloss sil very and two coats of lacquer,
Something looks really strange 🤨 1:20 - 1:25 did he made two wheels?
Can you share the chemicals required for chrome finish
Heard of brush plating. This would had been great in the '60's & 70's as our poor man's mag was a chrome plated factory rim. Will this hold to the elements?
(So called “chrome finish” paint is mainly intended for indoor diy use like mirror frames, picture frames etc, - It’s not as durable as silver car paint / enamel paint plus clear coat etc.)
I wonder if you applied a 2K clear coat over that would increase durability.
@ I’ve tried that myself but have found decorative chrome paint often reacts with 2k clear coat..
@@philtucker1224 reacts in what way?
@ Always best to try your paint choices on a sample piece first. Some paints can dissolve other types. It’s always best to buy primer/base coat/ clear coat that says what it “can be used with” - before risking it on your completed bodywork and then ruining the paintwork right at the end…
high risk of breaking your hand and arm 5:30 !!!!!
What do you mean lol
@@MauriceNL1i think he meant. 5:03
@@pz8843 True
Calm down karen. He's a professional. Don't try this at home.
Very Nice! What is in those 2 spray bottles?
2 components of chemical chrome solution
@@LowMileageChannel I've heard that the way you've done it is particularly difficult, based on the measurements of the fluids involved and the time they have to work - and the time to rinse th solution. Beautiful work, btw!
Silver nitrate.
Круто получилось 👍
Youre a wizard harry
Nice job ! 👍
Good job looks really nice
Very nice, even with the background sound effects
Saludos, falta el audio indicando cual es el proceso y que están utilizando...
Wow that's cool
Audio would have been great, so you could have stated what you were doing and using otherwise I just assume you either sent it off to be chromed or bought a new one.
Amazing work
I will try it. Thank you so much.
Why ?
What's the name of Chrome solution your using? Great finish
It's amazing.
You can buy a new steel rim for 45$..he has days wrapped up in a rim where that chrome will be flaking in 6 months
You must be fun at parties
😂😂😂@@vordan7111
Just admit that you're a typical lazy one.
But what price do you put on R&D?
What is the value as a proof of concept?
What price do you put on learning, developing, practicing, and mastering a skill?
😂🤣Exactly! Make it worth while. Like watching him restore a paper plate.
There's no way with big flakey rust that it started with, that it came out that smooth before the putty! I've cleaned wheels with way less rust that had DEEP pits 🙄
The starting wheel was perfectly fine 😂.
Good stuff!
Сейчас бы штамповки реставрировать 😅 но в целом прикольно, особенно хромирование удивило
«Жидкое серебро» - стоит круче настоящего😉))
How you chrome that with plastic spray bottles ?????
This is hydrochrome chemical chrome solution.
Amazing result, the wheel looked beautiful❤.
Ale aby taki efekt pozostał koło nie powinno wrócić do samochodu !
Please what chemicals did you mix
I really need your recipe for that hydrochroming solution, and how long does it actually last?
With all due respect to the master. I will still ask. Was it worth the money and time spent?
WoW😱
Lohnt sich der Aufwand und Materialeinsatz?
Diese Felge bekomme ich neu für unter 30€...
hi , Is it possible to choose the combination of chemicals used to make chrome solution?!
genial y que? productos utilizaste?
What sorcery is this?
chemistry and magic indeed have this affinity!
Pretty cool,but isnt a new set of steelies relatively cheap?
I think the whole process was for the video.
But steel wheels don't look like mirror finish chrome.
Two completely different levels of appearance!
Great job!
Absolutely brilliant!!!! Love your channel ❤👍🏴
Wie lange hält der Lack?
Could do without the fake shop noises in the background. More of a distraction.
Очень хорошо 👍👍👍
So some sort of magical alchemy? I’m dubious…
WOW, impressive and excellent job!!
👍👍👍
Kind regards from Mallorca, Spain.
Its amazing !!! how you did this?? ITS AMAZING!!!!! NICE JOB!!!
I've seen this chroming process before and still not convinced that there is such a thing.
Where do you get the kit
very good video
Przepięknie jest to zrobione A jak tam srebrna farba się nazywa coś pomalował tą felgę Pozdrawiam cię serdecznie. 👍👍👍👍👍👍
Cool
Das 4 mal mit der Arbeitszeit die da drin steck bekommt man auch schon neue Felgen. Ob das spachteln so gut ist? Wird das ganze dann nicht noch mehr Unwuchter. Wie lange die Spachtel Masse hält ist dann auch fraglich bei den ständigen Belastungen.
Красота ❤
What a load of negativity, bear in mind that not everyone is an automotive genius like most everyone on here, someone, somewhere will have learned a bit here.
👍Nice job!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Looks great, what a difference
what are the chemicals used to chrome the wheel and in what dosages?
It is a mix of about 10 types of chemicals. It must be mixed in very precise proportions. Maybe I'll make a video about it.
@@LowMileageChannel i would like to learn about that absolutely. 💯
@@LowMileageChannelPlease make such a video. I would love to learn this method. Thank you
@@LowMileageChannelplease make a video on this
Silbernitrat, habe ich 1994 selber angewendet. Hält nur wenige Stunden ohne Versiegelung
Very Impressive🧐
Daremna robota.
How do you move your hand that fast?
Oll my friends
Know the lowrider
The lowrider
it's a little higher
Tutututu tututu tututututu
凄い！
１本出来るのに何分掛かるのかな？
If it’s a soft plastic paint it will only last a few days max.
Ver good Thank you❤
Whats the recepie for chrome chemicals?
It is a mix of about 10 types of chemicals. It must be mixed in very precise proportions. Maybe I'll make a video about it.
Who chemically chromes NV200 rims?
Does anybody know where to get custom chrome wheels refinished🤔
Brilliant. What the chemicals for chrome and where to buy them?
Search in google for "hydrochroming solutions chemicals" but its not cheap, I recommend to make it by yourself.
@@LowMileageChannel thanks for replying.👍
Alsacorp makes chrome solutions
Wow. fantastic
you put a hell of a lot of work in that how long will it hold up
no gloves amazing
great video! any link please to share this magic chrome finish formula, craving for it right now.
Coming soon!
@@LowMileageChannel can you say The grain of The sandpapers and name of materials and paints please??
Nice job.
Looks Great!
Amazing job, thanks for sharing.
Wouldn't it be easier to laser clean the rim? Definitely way faster and therefore more cost-effective...
Why not just place the wheel in a vat of Evap-o-rust? I've removed rust from many items using it; the stuff works like magic in releasing the rust from the metal without affecting the core material. And it can be filtered/separated for reuse over and over. It has zero toxicity and is pH neutral.
Different level
New rims are so cheap that (even in a low income country) this makes little sense. If you have some special rims at hand, it's another story ofc.
Repairing a curved wheel is madness, and a waste of money. It's cheaper to buy a new one.
But that is what he loves doing, so it is not a waste of anything to him. All that matters is how HE feels after he did it. What any of us think on the negative side does not matter.
Gerat job
I'm just wondering if sandblasting is going on anyway, why do you bother using the brush, maybe to make the video longer, don't know
До первой грязи😂
Can you chrome plastic with this method?
yes of course.
Spray on "Chrome" will start peeling off in no time. Strip it, send it out for real triple chrome plating.
No, it wouldn't. Painted wheels last 10 - 15 years, depending on conditions of driving.
If you have too much money, better gold-plate them, while you are at it
No Bob is right. so- called chrome paint only lasts a few days, that’s why we don’t all have a can of it in our garage!
@@vordan7111what painted rims last ten to fifteen years . What bs
I didn't know that.
Amazing
why don't you put the rim back on the machine and spin it and pray the paint?
Nice resilt, but personally i hate chrome wheels , well done
Amazing? When having a load of spare time on your hands... put it into makeshift restoring something with longevity close to none.
excellent ❤
Interesting but it would have been more informative if you had given details step by step of what chemicals you were using.