KLX 110 PITBIKE MANUAL CLUTCH INSTALL

Поділитися
Вставка
  • Опубліковано 22 гру 2024

КОМЕНТАРІ • 46

  • @rossepstein5553
    @rossepstein5553 5 років тому +1

    Excellent video! Still have no idea what the little aluminum spacer is for.

  • @bubbzification
    @bubbzification  6 років тому +2

    When you pulled the primary clutch, you probably got the shift arm out of wack. Especially if it was laid over like I did. My shifter was hitting the ground and caused some issues with shift arm and tumbler alignment. I just pulled the primary clutch back off and adjusted everything where it should be.

    • @shanegonzales9353
      @shanegonzales9353 6 років тому

      K thanks bud ima take it off today and go thru it again, keep the vids coming! Was very helpful👍

    • @Monz-jy9hl
      @Monz-jy9hl 5 років тому

      You just need to remove the auto-clutch and jam the auto-clutch housing..

    • @jameskwak3198
      @jameskwak3198 Рік тому

      Washing the bike before disassembly would of been a good idea

  • @nuriskandar8377
    @nuriskandar8377 4 роки тому +1

    is it okay if take out the auto clutch? my motorcyle is same engine like u malaysian model motor . already put it all but my clutch is nothing . should i take out the auto clutch?

  • @chromechrome7360
    @chromechrome7360 Рік тому

    The clutch that u used what is it called

  • @bubbzification
    @bubbzification  6 років тому

    The big spacer that looks like a washer, is for if you want to leave it simiautomatic with a clutch.

    • @frasertive2726
      @frasertive2726 6 років тому

      bubbzification why would you wanna leave it semi automatic with the clutch XD

    • @a5outdoors
      @a5outdoors 4 роки тому

      @bubbzification I have a klx110l and want to make it a semi auto. I have the centrifugal clutch but what washer do I need ?

  • @TheOutDoorDaniel
    @TheOutDoorDaniel 6 років тому +2

    At 12:01 it looked like some dirt fell in the motor lol.

    • @bubbzification
      @bubbzification  6 років тому +1

      Theoutdoordaniel good eye. We was thinking nobody would catch that. When we stood the bike up, we seen several pieces of debris in the case so we flushed it out and shop Vac the bottom. That’s behind the scenes stuff 😂😂

  • @nickauberger
    @nickauberger 4 роки тому +3

    i feel bad that you didn’t wash the bike beforehand lol whatever works. good video

    • @bubbzification
      @bubbzification  4 роки тому

      This was filmed right before leaving for a ride. Thanks. Early days of wrenching and riding.

    • @WestHaddnin
      @WestHaddnin Рік тому

      It drives me
      Crazyyyyy as well. And it drives me nuts to read your response that it was “before” your ride and not after. Should be hosed down after every ride

  • @michaelknipp4712
    @michaelknipp4712 5 років тому +1

    I need a new kickstarter what mm is that 13mm is to small and 16mm is too big

    • @bubbzification
      @bubbzification  5 років тому

      michael knipp the kickstarter is Jax specific and different from most shafts. TboltUSA has replacements at a really good price. Tell them Bubbz from the TardSquad sent you and they will treat you right.

  • @connersnow298
    @connersnow298 2 роки тому +1

    Awesome vid

  • @trinitymassey2448
    @trinitymassey2448 4 роки тому +1

    Did he say 423, Like in East Tn

    • @bubbzification
      @bubbzification  4 роки тому

      trinity massey 423 Chattanooga Tennessee 🤘🏻😎🤘🏻

  • @shanegonzales9353
    @shanegonzales9353 6 років тому

    I just did mine tonight, it goes into gear but shifter stays stuck down past the peg. Then havta pull it up. Did you guys have that problem? And did you use that big spacer? I couldent find where it would go.

  • @HansZuerner918
    @HansZuerner918 3 роки тому

    What do you mean you cant put it in neutral ?,!!!!

  • @bubbzification
    @bubbzification  6 років тому

    I am pulling the cover again this weekend to reseal the sight glass. I will pull the clutch and video the shift arms and how they should look. That way if anyone else has any issues they can have the video to go back to. Thanks.

    • @shanegonzales9353
      @shanegonzales9353 6 років тому

      bubbzification yea that woud be awesome ill watch it for sure👍

    • @shanegonzales9353
      @shanegonzales9353 6 років тому

      O yea i forgot it would shift fine until i put the case cover back on and tightin the screws, when i start to snug them up is when the shifter will get stuck and then gotta shit it by hand.

    • @bubbzification
      @bubbzification  6 років тому

      Video should be up for you to see what I had to do.

  • @damoncustodio6577
    @damoncustodio6577 4 роки тому

    You still have all that stock stuff? I’ll buy it off u

  • @thicok4555
    @thicok4555 3 роки тому

    Dude just bent the back break out of the way lolololololol

  • @JackFreese
    @JackFreese 6 років тому

    Nice video!

  • @thetrailbarbers7309
    @thetrailbarbers7309 4 роки тому

    3 or 4 gears?

    • @bubbzification
      @bubbzification  4 роки тому

      MX Otter this one is 3 speed. We never installed the tumbler for the 4th gear. Fourth gear is in there, and TboltUSA has the tumbler to make it a 4speed. We just haven’t tried that upgrade yet.

  • @bubbzification
    @bubbzification  6 років тому +1

    Tell them bubbzification sent you

  • @thebeast7690
    @thebeast7690 5 років тому +1

    In my country MALAYSIA, The engine of MODENAS KRISS 110 perfectly same like KLX 110. Just the body of motorcycle is different. Btw MODENAS KRISS 110 is our national motorcycle in Malaysia. 😍

    • @bubbzification
      @bubbzification  5 років тому

      Mohd Syahrul if I’m thinking correctly, the engine over there has the 4 speed shift tumbler. These engines have 4th gear in them, but can’t be used without changing out the shift roller.

    • @thebeast7690
      @thebeast7690 5 років тому +1

      @@bubbzification yes it true. But the component almost same

  • @Monz-jy9hl
    @Monz-jy9hl 5 років тому

    The engine is same as Modenas kriss 110 engine in Malaysia country...😃

    • @bubbzification
      @bubbzification  5 років тому +1

      Monz 5287 these engines are amazing. We hav been hard on it and it keeps going.

    • @Monz-jy9hl
      @Monz-jy9hl 5 років тому

      @@bubbzification yupp.thats true...i have one Modenas kriss 110 and installed hand clutch..its a simple way if u know how to do it..
      Just keep on going..you can do it..😃if you want more details,just search on google😃
      Me from Sabah,Malaysia..😊

    • @nuazrauna1005
      @nuazrauna1005 5 років тому

      @@Monz-jy9hl mau tanya, pasang clutch manual ni blah auto clutch mau bagi mati mcm mana? Welding saja atau ada cara lain?

    • @Monz-jy9hl
      @Monz-jy9hl 5 років тому +1

      @@nuazrauna1005 kalau nk pasang manual clutch ni senang saja..x pyah pkai welding pun boleh..ni cara paling senang..
      Ada bush yg d tgh oneway bearing tu kan,itu kasi keluar..auto clucth tu pastikan dia melekat sama housing auto..bush yg tadi tu,d atas auto..trus ko kasi ketat tu skru kuat2..
      Main welding sy x syor kan..

    • @Monz-jy9hl
      @Monz-jy9hl 5 років тому +1

      @@nuazrauna1005jadi auto clutch tu x berfungsi sdh..

  • @bubbzification
    @bubbzification  6 років тому

    www.tboltusa.com