All-Grain Homebrewing with John Palmer (author of "How to Brew")
Вставка
- Опубліковано 22 сер 2024
- "How to Brew" author John Palmer stops by Northern Brewer to brew an all-grain batch of a very special recipe. In our video, Palmer discusses his techniques for adding salts to brew water, mashing, batch sparging (versus fly sparging), chilling and fermentation. It's a full-blown brew day with one of homebrewing's most influential people. Grab a pint and enjoy the show.
www.northernbr...
2023 and this is still one of the best tutorials on UA-cam👍
Also be patient and never panic during the process. In my very first batch ever (in my kitchen in Kuwait), I am a mechanical engineer and thought I had everything organized and calculated perfectly, including heat transfer calcs. But imagine my surprise when I started my cooling phase and found that my "cold" tap water was 108F, and not the 85F that I had assumed (I knew it was warm from my showers, but not THAT warm!). My final temp was 95F at midnight (after using all the ice that I had prepared and even frozen peas bags and everything else in my freezer!), and I figured all my hard work was in vain, as I would never be able to get it cool enough in time to pitch yeast. Then I had a flash, I put an old tee shirt over my carboy, soaked it and put a room fan in front of it. I went to bed, got up 4 hours later, and had 68F! And this ended up being the best batch I have ever made! (Of course this judgment may have been a little influenced by being my first batch and being in a totally dry country! But, trust me, it was gooood!).
That's a fun story, I have my first batch going right now, 5 days old. 5 gallons of a kit called st paul porter. Very dark and smelled amazing on brew day. 5 more weeks though before I can open a bottle of it, can't wait to see how my first comes out.
awesome story man, brewing adventures are always full of surprises. I also had a very interesting apartment home brew experience where my buddies immersion chiller leaked all over and it was my buddies apartment,and we were a lil drunk lmao. I kept warning him saying it's too much water leaking but he didn't listen, next thing ya know I hear his girlfriend yellin his name soo mad 😂 (they're engaged now lmao) but yeah we had to soak up the water with towels, wring it into their bathtub and repeat, this was also at like 11 pm and we were still cooling down our boil 😂😂😂
The best run through possible
John Palmer not only understands brewing well, he is very good at imparting his knowledge. Nice video.
The legend himself. It's always fun to read the comments here.
This is one of the first AG videos I watched when learning, and still find myself re-watching -- or reading "the" book, and still continue to learn something new. Cheers! -Ian
Brewery Show Yeah I watch this video a lot for little subtle details in technique. And also to see the awesome wall of grains that he's just chewing on nonchalantly.
Nice to see John Palmer hasn't forgotten about us home brewers with this video. Cheers
Having seen the disappearance of mild from the pubs in and around Nottingham. It hearten me to see Americans brewing this style.
+eyechubcunt You can get mild in micropubs in the UK. AND, try the geordie mild kit. It's done in only three weeks.
Excellent instructional video. Palmer is as articulate here as he is in his book. Best overview of mashing and batch sparging I've seen.
After having first read "how to brew" maybe 25 years or more ago it's nice to discover a video and put a face to the name! That looks like a great mild!
Nice to see John appreciates the style too.
I regularly brew two types of mild ales quite but more in the Victorian style.. 0.60 and 072 OG, or a summer beer and a winter jet fuel! boiled in copper, open fermented and without wort chillers or any fining additions, usually maris otter and a combination of black / crystal malts.
The Kent Goldings are a must of course but I usually go with fuggles, might give it a go substituting the fuggles with progress but was told many years ago by an old timer that progress were a poor mans fuggles! :)
You had us at open-fermented mild. I bet it's a thing of beauty.
got your book and learned to brew 5 gal on stove nov '18. learning curve turned up tons as i grow to 30 gal HERMS elect system from Blichmann. thank you for sharing your knowledge sir.
Thanks for this. There are many other "how to" videos on all-grain brewing but this is by far the best. Great info from someone that knows how to teach it, nicely shot, good sound and well edited. The others have some of these, but rarely all of these.
This guy is a brewmaster, speaks English properly and is really polite ¡great!
Just looking into starting all grain and this video has explained so much compared to other videos I've seen cheers lads keep them coming
John Palmer is a legend - check out his book "how to brew"
that's the 1st book i read. thank you JP
This was very helpful information for someone who is preparing for a first time all grain brewing. Thanks for taking the time to film this.
What a great video for a newbie like me to see. Learned so much thanks guys
Great video. I have been brewing for years and still love videos like this. Some is validating my process and some is learning. Thanks for the time to create these vids. Keep them coming.
Great videos. Learning so much from John Palmer after reading 'Water a comprehensive guide for brewer's'. O started off using DME and the boil but in the last 6 months started all grain brewing which didn't seem quite right. Now I know why thanks to John, great stuff, more of your knowledge please 😃
Great to hear! Thanks for checking it out and letting us know.
Thanks for the video. I used to brew back in the 90's from extract and it was pretty good New Castle clone but life happened and stopped doing it. I recently brewed a 5 gallon all grain batch for the first time, and I wasn't ready. (I didn't have spigot buckets or a false bottom) so everything was by hand. The beer was very forgiving so I got lucky. I learned alot here. I need some more equipment lol.
Hi, I'm watching this from Canterbury, Kent in the UK. Our lovely local hops, the East Kent Goldings you refer to at the start of the boil are what characterizes our local beers in Kent as being distinctly hoppy. Shepherd Neame in nearby Faversham typify this style. I used to brew all grain at home many years ago and I'm looking to take it up again. Great video and you guys have some lovely equipment that I'm jealous of! Well done over there for championing our style of beer and thanks for posting. It's inspiring me already.
Was chatting online to a friend from Texas and he mentioned those hops too. They seem like a good place to start for serious efforts - I'm just obtaining the equipment together now. Videos like this help, but also show what a mountain there is to climb to do it properly!
Ian....
My Family roots are in Timsbury , Romsey Shire, and We have a pub there....The Malthouse Inn....Been in the Family for generations. I remember Uncle Pip telling me stories of walking to Kent, Which was a long journey just to get some of those East Kent Goldings for the brew....... Thank you for recalling those stories...!!
Best place to buy high quality home brew equipment and kits
Thanks so much. We always try our best!
Great walkthrough, thank you!
What a great ad for northern brewer
This was a great demo. I'm doing all grain, but actually have never done a batch sparge. Looking at this demo, I'm willing to give it a try and it looks as if I'm just going to have to bit the bullet and upgrade my kettles. Thanks! Very helpful.
Great Vid. John's a great teacher. His book "How to Brew" is IMHO the best out there. I used it when I first starting brewing and haven't looked back since.
That was the best video I've seen in explaining sparging and how it's done.
Drooling at the choices of grains at Northern Brewer! How cool it'd be to work there AND to be able to brew with John Palmer!
If a picture is worth 1000 words, then a video must equal a million. Then when J.P. is on it, it goes TeraExponental. That man is awesome for Homebrewing. Being an extract guy, I never realized you stir & reset the grainbed with each sparge (I had this image in my head, I guess from fly-sparge pics, of carefully trying to preserve the original grainbed. And the calcium and pH discussions were very useful. Thanks gents!
I appreciate you knowledge John. I must read how to brew once a week (bits and pieces). Getting into partial mashes and someday when I get out of my small apartment I can go full mash. You've really made it easier to understand. Thank you!
The best brewer especially batch sparging. Brilliantly done 11:59
What a great video, thanks guys
This was very helpful. New grain Brewer doing 1 gal biab but soon to be purchasing some equipment for 5-6 gallon batches of all grain.
Thank you.
This is a seriously helpful video. Clearly presented various steps I needed to understand. Thank you.
Did my first all grain brew yesterday, made a SMASH with Marris otter and cascade
Awesome! What kind of system or equipment did you use?
@@NorthernBrewerTV Pretty low tech equipment, just a big pot and brew in a bag set up. Seems to have got the job done though 🤞
The man the myth the legend
Thanks for the brilliant website and videos! Great for us first-time brewers. Just bought your book on Amazon and am looking forward to going through it in detail...
Excellent video…..very informative
Thanks for the video and the book. Your book is great.
Great job John
Cheers
When batch sparging you don't need to mash out. Mash out is to raise the temp to stop conversion. With batch sparging you can start heating the first running as you drain and draining only takes a few minutes.
Great learning experience. Thank you!
Great video john
Thanks for the great batch sparging video, JP should do more of these videos lots of good info for learning homebrewers cheers!
Good stuff. That looked like a great batch.
It's great to see Oz from American Pie is keeping busy. ;) great video!
Thanks Neo
I am glad you mentioned extract kits. I just did a Brewers Best Double IPA. Holy crap! It was awesome. I am new at this, but some of the veterans in our club were blown away at how good it was. I added time to the boil for the hop additions for more hop flavor. It had some amazing body. The only suggestion given to me was to dry hop it for added aroma. Some of the veterans look down on extract kits. I was glad I was able to make them rethink their views. Thanks for the video.
This man is my hero
Ben Jerry: I can't seem to direct reply to you, but the reason Americans use pellet hops is simply that they are cheaper, and more readily available. When I go to a homebrew store, they may have a few varieties available in whole leaf or plugs, but the vast majority of their stock will be pellet. Even commercial brewers use pellets.
Thanks for passing on your knowledge. Happy 2020.
Been a follower for years. I was surprised he did a youtube video.. thats awesome!
great book, great video! thanks JP.
Man, awesome, so informative. Im going to watch this 10 times and take notes!
Thanks John! I bought your book. You have answered a lot of my questions about home brewing, thank you for keeping everything simple
I never paid much attention to the water I used in terms of ph and alkalinity, etc. But I will now. Thanks for posting your brew. Very helpful. -cheers
Thanks man, I brewed an amber ale with extract and grain, carbonated in the bottle with priming sugar, it was okay. All grain is going to suit my taste much better, thanks.
It absolutely depends on the gravity you are looking for and the mash efficiency of your system. Play around with some online calculators and DEFINITELY start with some established recipes if you are new.
Great video, I have learnt a lot with John's book and videos.
I plan on buying the book as soon as it's released.
Wow what a great calmness and what a thoroughly explained lesson. Thank you so much. I´m soon in for my THIRD batch ever :D (Actually I did a batch of extract beer in the nineties and I guess it scared me off and recently a friend got me to begin and I wonder "Why did´nt I do this earlier"? I recently did my first with some second hand gear and man it was pure chaos! But It´s "beer" in the fermenter!! The nice thing today is there is so much nice gear. Second thing I bought now was a 9 liter keg and a carbonation kit. Any day now I will buy another keg and some complementary things.
Merry Christmas!!
great video! thanks for taking the time to put this up.
Love your book!
Great Video! Thanks so much!
Great video! Helped a lot! Cheers!
The brew temp is "boiling." Basically, you want to start your hop addition schedule when you reach your boil. If you are doing a 60 minute boil, you typically will add your bittering hops as soon as the wort boils, and then start your boil timer.
Muy bien
Great vid. thanks for putting it up.
Added link to video description above. Thanks for your interest!
And the mash out???
What a great video!
Man, he wasn't even supposed to be here today!
A water chemistry would be excellent indeed. Especially with a water chemistry for dummies approach.
Is this the guy from Clerks?
Walter LaFleur I like to refer to him as the Kevin Smith of homebrewing.
Lol a Mashup between Dante from clerks and Julien from trailer park boys!
No . . . this is .... ''The Man''
Was reading John's book and saw a photo... all I could think is, I swear I have seen him somewhere before...
It's like "Where's Palmer?"
Great video. Thanks.
Very helpful. I already see 3 or 4 things I did incorrectly with an all-grain (Biere de Garde) brew last weekend.
Great video! John explains everything so calm and clear!
I've a question though, when you are sending the bolied wort from the pot to the fermentor, there's a kind of temperature controller (a thermometer, in daily language). Can you give me the details of this instrument? can I buy one in metric units?
Thanks!
to you mean thermometer on the fermentor,or do u mean a temp controller for your fermentation temperture control?
excellent video very informative, sure beats those craigtube videos that are all over youtube
Great video from one of the masters. I wonder what yeast he used though.
Just like his book, he explains things out of order lol. He has a lot of knowledge, but I’ve never felt like he was good at explaining things. The fourth edition of the book is definitely better than the third though.
more videos
please.
This guy is the Walter White of beer making!!
I have a statue of John and I pay homage to him daily with a Pint o' Gold. :)
Boiling temp. Watch the clock - and recipe - for Hop additions if you are not creating your own recipe. 80 min, 30 and 10 mins before end of boil are typical times.
John talks about cleanliness and how very important it is which is extremely accurate and true. Watch the Cockroach crawling across the bottom of the wall at 19:26. Not sure how clean a place is that doesn't include pest control.
Dang.. I've been having all sorts of efficiency issues usin my new brewzilla lately.. What you said about a slow sparge may be the key... I've been mashing out for 10mins which has been meaning the sparge drains so quick I can barely keep up getting water from my HLT into it! Light bulb moment.. thanks mate!
wow john just blew my mind i need to study harder
I made good extract beer 17 years ago. Perhaps much changed in 3 years.
John, do you like your Top Tier? I ask because I like how it doesn't take up a lot of space. I have two Blichmann pots and one HLT made from a Gott Cooler. I am also going to make the Gott HLT electric soon. Thanks for all you have done for the Homebrew community.
This guy is the Walter White of beer! And not a criminal either :)
cool I love chemestry
Wyeast 1275 Thames Valley or White Labs WLP022 Essex Ale
recipe is in the description.
Near the beginning John mentioned Beersmith.
John - do you ever do any demos / presentations etc. back in HOUGHTON, MICHIGAN? Come back to da U.P.!
suggestion for video: continuous sparging vs. batch sparging
Hey thanks for the help. I've done 2 all grain brews now, trying to do lagers. they prob won't be drinkable!! But I guess i'll get better in the end!Hopefully :)
I am going to be jumping to all grain. Built my own cooler mashtun from videos on here. Buying a 10 gallon kettle from Amazon. This video helped with my anxiety a little. I have Florida well water. It has a ph of 8.6. Could I use acid malt instead of mash stabilizer and using powdered chemicals?
This guy looks like the dude off of Clerks
"I'm not even supposed to be brewing today!"
Instead of heating the entire malt back up for insertion of hopps, can you take a small portion of the malt and boil this on the stove and add back to cooling batch to save power ? 5 Gal is a lot to heat back up.
The most heat loss I've ever had was 2 degrees. When I started i always heard to heat 4-6 degrees above your strike temperature. I only lose 1-2 degrees. Not sure why.
i love you guys are good
How high a temperature will those plastic coolers withstand? I've heard at high temps they tend to expand and buckle and stay that way, not that it matters. What do you think of the stainless steel jobs with injected foam insulation in them?