If you’re watching this, do yourself a favor and use Tom’s Keys to make your Toyota key. I used the Toyota Keymaker and I got the strange light turned on that he talks about at the end, and I couldn’t get the remote parts working. He’s right that it’s fine fir a valet key. The Tom’s Keys gadget programmed everything really well, it worked with my cheap Amazon keys, and it got rid of that weird light too. Thanks El Chano Jose!
that is the security indicator light, the flashing means that its not armed, park the vehicle and turn the key from on to off five times ending with OFF, remove the key then start it and see if the light remains off. This has worked for me after programming new key I had the flashing light issue. Hope this helps someone.
Jose, what model and year Toyota is that? From the video, it looks like it will program an unprogrammed key, but it will unprogram a programmed key. I don't like that new flashing security light, though. I wonder if someone has posted instructions for making one of these key programmers. I suppose, though, that there's an internal chip with software to interact with the car computer. My 2006 Scion tC uses the same transponder key as a friend's 2008 Toyota Matrix, but I can program new keys using the procedure where you open and close the door 5 times, but that won't work on the Matrix. (The pressing-the-pedals routine doesn't work, either.) The Smart Keymaker is supposed to work on the 2008 Matrix, which is why I bought one and am now looking for the right instructions.
hello thanks for everything, i still have a question. now the device has come i put it in the obd then waited it beeped the whole time, now the indicator light of the immobilizer does not go out, could the control unit have broken?
Hello Dashty! This component works only in Toyota. But you might find other products on the market that are for your car or other cars. Take care Dashty!
RAV4 2010, dot on the original blade. Bought 2 keys from ebay. Seller said, chip is 4D67 and will work. When you plug the obd keymaker, the computer goes into solid red SEC programming mode. Very difficult to get out of programming. In your clip, as soon as you removed the key, the SEC light goes off, but in mine, it stays on. I tried to turn it off by quickly turning the original key on-off a few times, and now the car will not start with the original key!!! All online instructions I found: All keys are lost, you must press the LED button constantly. Can anyone tell me where is the ???? LED button? There is a LED light on the keymaker, but no button to push. Any help will be appreciated.
How were you able to clear the transponder keys from the ECU? You mentioned disconnecting everything. Is there a way to do this by disconnecting the ECU, or did you use an OBD-II cable and TechStream?
you have to use a paper clip and connect terminal 4 unto terminal 13 on the OBD socket, and leave the ignition ON for 30 minutes, however before you do that, disconnect the battery, (the main earth side- NEGATIVE terminal) and using a jumper cable connect the positive cable of the battery to EARTH,remember the other earth (negative cable) MUST be disconnected whilst you're doing this,this will dissipate all the charge in the system and flatten the capacitors in the ECU, do this for about 5 minutes, then proceed with the 1st part of this instructions (reconnect the earth cable back on) 1st, once all this is done, your ready to reprogram the keys.
@@sollykhan2385 Thanks for the reply, I think I ended up doing this using TechStream but it was almost a year ago already, so I can't even recall anymore. Either way, I now have two working keys and remotes.
@@ChrisMak1 so glad it all worked out well, shame it took so long for anyone to notice your post, take care, and THANK you for responding to my concern, take care, Bless🙂
To clear that security lights flashing, you need to insert the master key and turn to ignition 5 times with less than 5 seconds. It will clear the code.
@@west_park7993 Most of the 2000s toyota vehicle are programmed for two master keys only. That's meant one of your key is being deleted from the systems. You can program your master key back by doing the same way. If you want more than 2 keys, you need to clone it.
Hello Afford! I bought mine from eBay, but there are a few option to buy it from online. I saw it in Amazon also. The price is also different depending where you buy it from. Take care Afford!
Hello Adu! We use it only in our Toyota Camry but have not tried on other cars. So far we have programmed 4 keys to our Camry and save lots of money with this device. Take well care Adu!
Hello Jasón! I have not yet run in to that situation but it works. The only thing is that the new key has to be cut and that is why you need on car key to get the right cut so it can turn the ignition. If you have no key to copy the new one, how are you going to turn on the ignition?
@@elchanojose If you dont cut the blank key before programming, it should turn the ignition on. A locksmith can cut your blank "uncut key" if you remove the driver side switch and take it to him.
Hello Johnny! First of all thank you for visiting our channel! What car is the one you need a key for? Getting or buying a replacement key for your car can be very confusing do to having lots of sellers and different keys claiming to fit or work with your car. First, compare the shape of the key you are buying to the original key of your car. Second, on the description when buying a key make sure the seller or the place you are buying that the key fits and works with the car and model you own. You don’t have to buy the most expensive key for it to work. Try to match the description of the seller to the car you own. Let us know if we can help you further about the key for your car! Take care Johnny!
Hello Ting! I borrow this item from a friend and after I saw how much I saved by programming my own keys, I bought one for me. It has been a great investment. Take well care Ting!
ultimate piece of garbage. if i program 1 key, the other key is deleted. or all are deleted. no one has posted clear and understandable instructions. i am returning mine to walmart.
WRONG! You can buy an OBD port programmer for Type G or Type H keys; OR......... you can buy a VCI mini cable and use Toyota Techstream software with a laptop. Both of those options are cheaper than going to the stealership!
@@postingid3214 How about telling people what year your car is? If you want your key to work EXACTLY like the original one with all the functions to open the trunk and operate the alarm system you need to have the dealership program a new key. If your driving an old shit beater and don’t mind driving around with instrument lights flashing then go ahead and buy this.
@@Gigantortacoma4x4 ***LMAO*** "TRIGGERED!!!" btw: the wife's car is a 2011. I paid a locksmith $25 to program it. I got the key from Amazon for $18 and Lowe's cut it for free. (I got it cut before I had it programmed)
All you have to do going to locksmith with the original and pay 15 dollars....lololol. You uses the immobilizer went you lost all keys TARTA..TARTA..LOLOLOLO
If you’re watching this, do yourself a favor and use Tom’s Keys to make your Toyota key. I used the Toyota Keymaker and I got the strange light turned on that he talks about at the end, and I couldn’t get the remote parts working. He’s right that it’s fine fir a valet key. The Tom’s Keys gadget programmed everything really well, it worked with my cheap Amazon keys, and it got rid of that weird light too. Thanks El Chano Jose!
where do you get that 'toms' keys from,is it a programmer ? or different set of keys ?
that is the security indicator light, the flashing means that its not armed, park the vehicle and turn the key from on to off five times ending with OFF, remove the key then start it and see if the light remains off.
This has worked for me after programming new key I had the flashing light issue.
Hope this helps someone.
Все отлично рассказал! Чтобы погасла лампочка охраны нужно оригинальным ключём 5 раз включить выключить зажигание
Jose, what model and year Toyota is that?
From the video, it looks like it will program an unprogrammed key, but it will unprogram a programmed key. I don't like that new flashing security light, though.
I wonder if someone has posted instructions for making one of these key programmers. I suppose, though, that there's an internal chip with software to interact with the car computer.
My 2006 Scion tC uses the same transponder key as a friend's 2008 Toyota Matrix, but I can program new keys using the procedure where you open and close the door 5 times, but that won't work on the Matrix. (The pressing-the-pedals routine doesn't work, either.) The Smart Keymaker is supposed to work on the 2008 Matrix, which is why I bought one and am now looking for the right instructions.
Thanks for this. QQ. So don't unplug it before turning it to ON 5 times? Or unplug it and leave it out while you turn it to ON 5x times?
hello thanks for everything, i still have a question.
now the device has come i put it in the obd then waited it beeped the whole time, now the indicator light of the immobilizer does not go out, could the control unit have broken?
Thanks so much. Great video.
Thank you for watching our video. Take well care Danny!
Thanks you man that's help me
Hello Jack! I am glad that this video was much help for you, take care Jack!
All right. This guy talks prices.
I would like to know if I can program a key for my 2005 Toyota Corolla, but the only key I had (original key) I lost. I can do this?
Do you have a key using right now for your car?
Very informative gracias 👍🏼👍🏼👍🏼👍🏼👍🏼
Hello. I tried to program my 2007 corolla and it did not work for me. I posted the video on my channel.
will this work with 2009 toyota matrix
Any hope to stop flashing security light?
Illuminate watching you 👁
Thanks for your support and time. Dose it work only on toyota?
Hello Dashty! This component works only in Toyota. But you might find other products on the market that are for your car or other cars. Take care Dashty!
Work for avanza 2017 or not
RAV4 2010, dot on the original blade.
Bought 2 keys from ebay. Seller said, chip is 4D67 and will work.
When you plug the obd keymaker, the computer goes into solid red SEC programming mode.
Very difficult to get out of programming. In your clip, as soon as you removed the key, the SEC light goes off, but in mine, it stays on. I tried to turn it off by quickly turning the original key on-off a few times, and now the car will not start with the original key!!!
All online instructions I found: All keys are lost, you must press the LED button constantly. Can anyone tell me where is the ???? LED button? There is a LED light on the keymaker, but no button to push.
Any help will be appreciated.
Hola Jose:
Si quieres hacer 3 copias
como lo harias?
Gracias!
Some people complain that the security light stays on after programing. Is there any fix to this?
yes, put black pvc tape over it !!🙂
C est bon mon chef
Good iob my sir
That light is the SEC light (security light) You can remove the error code with OBD2 reader.
How were you able to clear the transponder keys from the ECU? You mentioned disconnecting everything. Is there a way to do this by disconnecting the ECU, or did you use an OBD-II cable and TechStream?
you have to use a paper clip and connect terminal 4 unto terminal 13 on the OBD socket, and leave the ignition ON for 30 minutes, however before you do that, disconnect the battery, (the main earth side- NEGATIVE terminal) and using a jumper cable connect the positive cable of the battery to EARTH,remember the other earth (negative cable) MUST be disconnected whilst you're doing this,this will dissipate all the charge in the system and flatten the capacitors in the ECU, do this for about 5 minutes, then proceed with the 1st part of this instructions (reconnect the earth cable back on) 1st, once all this is done, your ready to reprogram the keys.
@@sollykhan2385 Thanks for the reply, I think I ended up doing this using TechStream but it was almost a year ago already, so I can't even recall anymore. Either way, I now have two working keys and remotes.
@@ChrisMak1 so glad it all worked out well, shame it took so long for anyone to notice your post, take care, and THANK you for responding to my concern, take care, Bless🙂
Hello my friend.
I have toyota yaris d4d 2010
how can I program it?
👌
Thanks a lot
Hello Manuel! Thank you for taking your time to watch our video. Take well care Manuel!
Despues que termines tienes que meter 7 veses y sacar la llave poniendo la llave en on para que siere el ciclo de programacion
Lo hice tal cual lo hizo y funcionó perfecto
Hello.This can program a Toyota Prius smart key to?
Hello Batbuyan! What year is the Toyota Prius? Thank you for visiting our channel and take well care Batbuyan!
I need help to know seconds key
To clear that security lights flashing, you need to insert the master key and turn to ignition 5 times with less than 5 seconds. It will clear the code.
yeah. i did. now the original master key is not recognized
@@west_park7993 Most of the 2000s toyota vehicle are programmed for two master keys only. That's meant one of your key is being deleted from the systems. You can program your master key back by doing the same way.
If you want more than 2 keys, you need to clone it.
This can program a 2012 Toyota rav4 to?
Hello Kumey! Yes, you just need to get the right key for your car and have it cut. With this tool you can program your new key. Take care Kumey!
Where can I buy this Toyota key maker? Thanks
Hello Afford! I bought mine from eBay, but there are a few option to buy it from online. I saw it in Amazon also. The price is also different depending where you buy it from. Take care Afford!
I no longer have the original key, is that also possible?
Hello Mesut! As long as you have a working key to turn the car on it should work. Take well care Mesut!
@@elchanojose I only have one key without a chip. and i tried it it beeps continuously
Please is for Toyota or you can use it for any car. ?
Hello Adu! We use it only in our Toyota Camry but have not tried on other cars. So far we have programmed 4 keys to our Camry and save lots of money with this device. Take well care Adu!
camry chip berapa???
Hola , donde se podrá comprar en Guatemala o México ??? , solo es para Toyotas
Ola Octubre! Este componente lo puedes comprar en Amazon y es para programar llaves Toyota. Saludos Octubre!
Does key maker work if all keys are lost u have no keys
Does key maker work if all keys lost
Hello Jasón! I have not yet run in to that situation but it works. The only thing is that the new key has to be cut and that is why you need on car key to get the right cut so it can turn the ignition. If you have no key to copy the new one, how are you going to turn on the ignition?
@@elchanojose If you dont cut the blank key before programming, it should turn the ignition on. A locksmith can cut your blank "uncut key" if you remove the driver side switch and take it to him.
@@kurty-allenresiere4881 if there's a cylinder on the passenger side it'll be on there
HOW YOU KNOW HOW YO GET CORRECT CHIP KEY?
Hello Johnny! First of all thank you for visiting our channel! What car is the one you need a key for? Getting or buying a replacement key for your car can be very confusing do to having lots of sellers and different keys claiming to fit or work with your car. First, compare the shape of the key you are buying to the original key of your car. Second, on the description when buying a key make sure the seller or the place you are buying that the key fits and works with the car and model you own. You don’t have to buy the most expensive key for it to work. Try to match the description of the seller to the car you own. Let us know if we can help you further about the key for your car! Take care Johnny!
@@elchanojose I have a Celica 2000 gts. I LOST THE ORIGINAL KEY, SALUDOS paisa.
I wan to buy this item do you have this item?
Hello Ting! I borrow this item from a friend and after I saw how much I saved by programming my own keys, I bought one for me. It has been a great investment. Take well care Ting!
According to what I read online the device can also program the remote side
A donde lo consigo . Me puedes dar el link para buscarlo en la tienda porfavr
Bad produit for 4c corolla 2004
That's how you turning it off thank you ua-cam.com/video/i1VupOflkQI/v-deo.html
ultimate piece of garbage. if i program 1 key, the other key is deleted. or all are deleted. no one has posted clear and understandable instructions. i am returning mine to walmart.
This device only works on old Shitbeater cars. New Toyota vehicles 2012-2020 keys need to be done at the dealership.
WRONG! You can buy an OBD port programmer for Type G or Type H keys; OR......... you can buy a VCI mini cable and use Toyota Techstream software with a laptop. Both of those options are cheaper than going to the stealership!
False! I used Techstream and VCI mini cable to do mine at home.
Hey guys look another know-it-all
@@postingid3214 How about telling people what year your car is? If you want your key to work EXACTLY like the original one with all the functions to open the trunk and operate the alarm system you need to have the dealership program a new key. If your driving an old shit beater and don’t mind driving around with instrument lights flashing then go ahead and buy this.
@@Gigantortacoma4x4 ***LMAO*** "TRIGGERED!!!" btw: the wife's car is a 2011. I paid a locksmith $25 to program it. I got the key from Amazon for $18 and Lowe's cut it for free. (I got it cut before I had it programmed)
All you have to do going to locksmith with the original and pay 15 dollars....lololol.
You uses the immobilizer went you lost all keys TARTA..TARTA..LOLOLOLO
Hello. I tried to program my 2007 corolla and it did not work for me. I posted the video on my channel.
Hello. I tried to program my 2007 corolla and it did not work for me. I posted the video on my channel.
You may done something wrong